Electrical Engineering

1. SAROJA KUMAR PATRA
Electrical Engineering
Mobile: +91 8018842137/ +91 9337521085/Res: +91 9437769408
E-Mail: saroj.kumar7521085@gmail.com/saroj_bteeng@ymail.com
Seeking assignments in Electrical Engineering/ Project Management/ Operations & Maintenance with a
reputed organization
SYNOPSIS
 A competent professional with an experience of over 12 years in Electrical Engineering.
 Currently associated with National Mineral Development Corporation, Nagarnar,
Chhatisgad with Executive 1-A rank (Electrical Dept) in Sinter plant (460 Square Meter).
 Previously 8 years experienced at Mesco Steels Ltd., Jajpur as junior Manager
(Electrical Dept.) in Sinter Plant (36 Square Meter).
 Worked at Jai Balaji Group of Industries.ltd (Electrical Dept.) in
Rolling Mill and Producer Gas Plant, Durgapur, West Bengal
 Quickadaptabilitytochangingtechnologiestomeetnew requirementssuccessfullywith a systematic and
organized approach for increased efficiency and competence.
 Knowledge of Planning, Installation, Commissioning & Fault diagnosis of Motors and Transformers.
 Creative with effective interpersonal skills and organizational abilities.
 Strong, coordinating, planning and problem-solving abilities.
 Ability to work under pressure in, time-sensitive along with maintaining quality.
KNOWLEDGE FORTE
 Possess good knowledge in Areas: -
 Sinter making machine System (460 Sq. meter and 36 Sq. meter)
 EOT Cranes (Single and Double graders, Gantry and Hoists)
 Conveyor Systems (Belt, Chain and Screw Conveyors)
 Mixing Systems (Eirich Mixture, Granulator, MND)
 Weigh Feeders and weighing Systems
 ESP Systems (Alstom Make)
 Pump House Mechanisms
 Sinter Cooling bed System
 HVAC and FCU Systems
 Chemical Dosing System
 Burner Control Systems
 Illumination systems
 Greasing Systems
 Bag filter Systems
 Lifts and Elevators
 Pug mill systems
 DCV Systems
CAREER SCAN
Since March’2019 -Till Now National Mineral DevelopmentCorporation(NMDC) Executive-1(A)
(Electrical operation and maintenance) -Sinter Plant (14000 TPD)
Key Deliverables
¥ Handling the Testing and commissioning of:
 Transformers (Dry type, Lighting, Rectifiers, Converter Transformers)
 VVVF, LCI Drive, LIW, Rectifier and Weigh feeder panels
 Electrical, Electronics and Neutral Earthing Systems

2.  Conveyor Protection safety equipment
 Chiller Unit, CSU, AHU, FCU Systems
 UPS, battery banks and FCBC panel
 Belt watch, Burner control Panels
 PA, Intercom and CCTV Systems
 PCC, PDB, MLDB, LSCP Panels
 I-MCC, I-MCP, C-MCC Panels
 PLC, SCADA & HMI System
 6.6 KV Isolators (VCBs)
 EOT Cranes and Hoists
 Air blasting Unit Panel
 Harmonic filter panel
 PLC and RIO Panels
Significant Highlights
¥ Involved in Errection, PAT, Trial runs, FAC and various testing jobs.
¥ Record keeping of billing (Errection and Supply) and MDCC files.
¥ Involved in various documentation works for Drawings and manuals.
¥ Coordinating with foreign technical experts during testing and commissioning.
¥ Reporting and communicating with seniors about progression of commissioning.
¥ Preparation of maintenance formats for various equipments.
¥ Preparing SOPs and SMPs for various Equipment.
¥ Procurement and Indenting of materials.
¥ Using SAP (MMModule) & MDM tool.
¥ Processing procurement process through GeM portal .
¥ Attending various jobs during Electrical Inspectors visit.
Since Jan’2012 -Feb’2019 Mid East IntegratedSteelsLtd., Jajpur Junior Manager
(Electrical operation and maintenance) -Sinter Plant (900 TPD)
Key Deliverables
¥ Handling the comissioning and Maintenance of:
 6.6 KV HT Panels, PCC, MCC, PDB, LCS, RIO Panels
 Zero Speed, pull cut and belts way switches
 PLC, VVVF, SCADA & HMI System
 Rectifier transformer (Hind Rectifiers)
 Vacuum Circuit Breaker (SIEMENS)
 Air Circuit Breaker (SIEMENS)
 Transformers and AC motors
 E.O.T Cranes
 PID controls
 AC Drives
Significant Highlights
¥ Accomplished ISO (9001-2008) training at the current plant Premises.
¥ Efficiently handled the emergency breakdown maintenance, troubleshoot, and maintenance, use of
Switchgears for use in ac motors, Terminations and all types of Electrical calculations.
¥ Worked in ERP system with SAP (PMModule platform)
Nov’09 to Jan’12 Jai Balaji GroupOf IndustriesLtd., WestBengal Electrical Engineer
(Electrical operationand maintenance) - RollingMill (16inch,300TPD), Hot Repeatertype,

3. Rollingmill (18inch,600TPD), Hot Continuous type
& ProducerGas Plant
Key Deliverables
¥ Handling the Operation and Maintenance of:
 Automatic power factor system
 Slip ring motor (up to 1000kw)
 DC and Induction motors
 Pressure transmitters
 Level transmitters
 Flow transmitters
 Distribution Transformers (Dry type and Oil type)

SignificantHighlights
¥ Preparing daily, weekly, monthly progress report, assisting to seniors for various problem solving and
producing BOM& BOQ, designs, tests, failure investigations, install, fault preventive maintenance.
¥ Effeciently handled the emergency breakdown maintenance, troubleshoot, and maintenance, use of
Switchgears for use in ac/dc motors, Terminations and all types of Electrical calculations.
SCHOLASTICS
2011 EMBA (Maintenance Management) fromIndianSchool of Business &Management, Kolkata with 86%
2009 B.Tech. (Electrical Engineering) fromDhaneswarRathInstitute of Engineering&ManagementStudies,
Biju Patnaik University of Technology, Orissa with 64%
2004 12th
from College of Basic Science & Humanities, OUAT, Bhubaneswar. C.H.S.E. Orissa with 59%
2001 10th
from Singhpur. High School, Jajpur, B.S.E. Orissa with 76%
IT FORTE
Operating System : Windows 10, Windows-7.
Designing : AUTOCAD, PLC, and SCADA
Software : Testing and Utilizing Advanced New Software
Other : MS – Office, PC assembling, Internet Applications
PROFESSIONAL TRAININGS
¥ Successfullycompletedone monthcertifiedvocational SummerTrainingon Transmission &Distribution at
Rourkela Steel Plant (RSP), Rourkela, Orissa.
¥ Underwent 2 Months certified Training course on Programmable Logic Control (Schneider, Siemens)
¥ Possesssoundknowledgein SCADA (WINCC) From IIATCA, Kolkata.
¥ Successfully completed one day training programs in advanced automation at CTTC, Bhubaneswar
PERSONAL SNIPPETS
Date of Birth: 9th
May 1986
Address: S/O- Mr. SatyanarayanPatra;At/PO- Singhpur,Bhia-Binjharpur;Dist-Jajpur,Orissa-
755016
Languages known: English, Hindi, Bengali and Oriya