This document describes a proposal for a device that can regenerate energy without using fuel. The proposed device uses a small battery to produce a high amount of energy. It then uses a small percentage of the output energy to recharge the original battery, completing the cycle. This device has the potential to address issues like pollution, high energy costs, and reliance on fossil fuels. It could power things like electric rickshaws or home appliances. The proposal outlines the technical details of the design, components used, innovation of the solution, and potential positive impacts on the environment, society and economy.
Call Girls in Nagpur Suman Call 7001035870 Meet With Nagpur Escorts
India Innovation Challenge Design Contest 2019 proposal generates clean energy
1. India Innovation Challenge Design Contest 2019
IICDC 2019 PROPOSAL
Team ID: 1166263
College Name: Mahatma Gandhi Mission’s College of Engineering &
Technology
Title of the Idea: Regenerate Energy without fuel
Table of Content
1.0 Team Details
2.0 Business Details
a. Project Abstract
2. b. Market Analysis
3.0 Technical Details
a. Product Brief
b. Proposed Design
c. Innovativeness of the Proposed Solution
d. Impact of the proposed solution
e. TI Components Used
f. NON-TI Components Used
1.0 Team Details
All the team details are entered in google form.
2.0 Business Details
a. Project Abstract
Our projects will solve the following problems:-
Consumption of fossil fuel at alarming rate
Energy is costly.
Pollution
What is the idea:-
Idea is to create device which will produce high amount of
energy starting from a small battery and also 3% of the output
energy is used to charge that battery again.
This energy can be used to run e-rickshaw, home appliances
like fan, juicer, etc.
Impact of our solution:-
This will give birth to new inventions
Pollution will reduce
This device is portable so it is easy to get electricity
anywhere, anytime.
Much more efficient than solar panel.
Everyone get energy at very low price.
Device will have great efficiency.
3. Energy we produce is clean and green because we do
not use any fuel to produce.
b. Market Analysis
Costumer Need: - our idea is based on energy production and
costumer need related to energy are:-
Free/cheap energy
24 hours Electricity
A permanent solution of pollution
Substitute for their currently using products
Everywhere electricity (for e.g. mountains, desert or in
forest Army need electricity)
Safety
A device which produce green energy.
impact on
society
Reduce
Energy crisis
give birth to
new
inventions
Non
renewable
energy
resources
save money
Energy
recycle
ecofriendly
4. • Total Addressable Market:- Farmers, factories, vehicles,
everyone who wants energy at very low cost (free electricity)
may our audience, this device is sell as a sub part
(accessories) of another product, like lens are used with
camera, battery is used by torch/phones/computers/etc.
• Service Addressable Market: - 3rd
party companies will use
this device to enhance the functionality of their product. Big
companies are our SAM All those companies whose device
runs on energy may be our market for e.g. automobile
companies, mixer, fan, engines manufacturers are our SAM.
• Justification: - This device produce high amount of energy
without any external fuel (input source) and also works on
one time pay only principle only battery need to replace after
few years, hence it may be a game changer
Product Differentiation w.r.t. Competition: -This product may
create monopoly in market because it has unique feature which
is producing high amount of energy without using any direct
input like fuel. This device can even run E-rickshaw, cooler.
Competition: - there may be a little competition like solar
panel, smart batteries, water engines, etc.
Total
Addressable
Market
Serviceable
Addressable
Market
Service
Operable
Market
Factories, farmers, taxi/cab
services, small startups and
those who want electricity
at low price (free energy).
Small startups,
entrepreneurs, automobile
sectors, etc.
Companies whose product
depend on energy will sold
this item
5. 3.0 Technical Details
a. Product Brief
Due to many factors our earth is polluted, because of this many
major environmental, health issues arise, we need permanent
solution for these problems.
Objective: - Create such a device which can produce very high
amount of energy starting from small lithium ion battery. This
device is cheap, small in size, ecofriendly, economical.
6. Core technical innovation initially we create our product
only for one purpose that is generation of electricity & this is
the core of our technical innovation.
Uniqueness of your product Novelty of the project is the
device do not require any external energy source, it produces
electricity by small battery and little percentage of the output is
used to charge battery again.
This can work with any type of device weather it is automobile
(like E-rickshaw or car) or any other home appliances.
b.
c. Proposed Design
Block Diagram: -
improve
Test
Build
7. rough block diagram of the solution (design).
Current: - One battery can produce 12volts and 2.5 amp of
current and use a current amplifier to amplify current, after this
join these batteries in series and increase the current ampere.
Voltage:- generally normal transformer are much larger in size
and also not more efficient but toroidal transformer is more
efficient because of its circular design magnetic flux can easily
flow through it.it can amplify the voltage level from 12 volts to
1000v or more according to its size.
Power = (current) X (voltage)
We take a little percentage of our output supply to charge the
batteries again (similar process is also used in tesla’s car) and
8. hence a cycle is complete. We have to replace batteries only
after 2-5 years
References:-
1) Concepts of physics HC VERMA part 2
2) principle of emi
3) Rumkhorff’s induction coil
4) Tesla’ car’s principle
d. Innovativeness of the Proposed Solution
This product is very innovative but cost is little high,
Initially making this device will cost approximately 40,000, but it
is one time invest you don’t pay to again & again for fuel, or
input energy.
Possible features of our product are listed below:-
Energy we produce is clean and green because we do not use
any fuel to produce.
Our device will not produce smoke, hence it is environment
friendly.
Easy to use as compared to others
Little percentage of output is given to battery to charge.
environ
ment
costumer
problem
profit
9. e. Impact of the proposed solution
It will impact on following:-
Environment this device will not produce air pollution.
Society peoples won’t have to pay again & again for
energy, it is one time investment.
Rural areas in rural areas people will have not 24
hours electricity, by this device 24 hours electricity is
possible.
Economy This project will boost the economic sector of
our country.
New inventions new inventions will boost and get and
a new different direction.
Startups startup also get new opportunity and will
create Blue Ocean for them.
Everywhere electricity Availability of electricity is for
any place is also a good
f. TI Components Used
We use following ti components:-
unidirectional current sense amplifier
http://www.ti.com/product/INA293-Q1
voltage output current sense amplifier
http://www.ti.com/product/INA190
high-precision operational amplifier
http://www.ti.com/product/OPA2210
EVAL MODULE FOR TLV70433
http://www.ti.com/product/AMC1304M05
Dual-band network processor module solution
http://www.ti.com/product/CC3135MOD
TPS27S100 is a 40V http://ti.com/product/TPS27S100
TPS1H200A-Q1 http://www.ti.com/product/TPS1H200A-
Q1
10. NOTE:- LINK to request TI Components
(https://www.appsheet.com/start/9942de15-eac7-4ba9-8a02-
ea812e193880), this appsheet link is not working properly,
Kindly update this link.
11. g. NON-TI Components Used
The NON-TI components used are as follows:-
Toroidal transformer toroidal transformer will amplify the
output voltage and also reduce the current because
power remains constant.
Photovoltaic cell (solar cells) these cells will used to
produce current from fluorescent light (also LED light).
They will amplify current in our device/project
Batteries batteries will used to give input power to urn
the whole device without battery the device can not start,
also 5% of output is used to charge battery again.