Atal New India Challenge Presentation By G.Omsuraj, P.jaya Chandra on waste management system

1. Waste Management System
Name of the Mentor
Dr. Jarupula Somlal
Professor of EEE
K L (Deemed to be University)
Name of the Student
Mr.G.OmSuraj
Mr.P.Jaya Chandra
K L (Deemed to be University)
Presented To: Atal New India Challenge
NITI Aayog (New Delhi)

2. Suitable Solution for challenge
These days, the total waste has been dumped at one
place, which affects the environment and society.
The Waste can be recycled and reused if they are
separated properly.
By our proposal the dry waste and wet waste can be
separated.
After separation of the dry and wet waste, the dry
waste is again processed to separate different
materials such as paper, plastic and metal which can
easily recycle and reused.

3. Technical Aspect of Solution
 Technology used: Robotic Technology, AI Techniques
 Technical Equipment used: IOT Sensors, Robotic Arms &
Arduino.
 The main components: The robotic arm mechanism along
with IoT sensing devices for sensing and separating the
objects which are abundantly dumped at a particular place.
 The sensors used: The magnetic separating sensors,
temperature and humidity sensors.
 The sensors sense the material and send the signal to main
server to activate the command control for the robotic arms
to perform the required action after which the arms will
separate the material according to the command received.

4. Demonstration of Prototype
Layout Design of prototype
Pictorial Representation
Of Prototype

5. Go-to Market Strategy
The produced output of the plastic can be supplied
to the plastic production companies.
The collected paper waste can be sent to recycle
paper companies.
The Metals wastes can be used as the
manufacturing of robots, metal instruments, etc.
The usage of resource outcomes makes the income
generation.

6.  Technical Aspects: Needs a programming knowledge
people.
 Cost barring capacity of the company
 Physical Aspects: Size of the equipment should be large
enough.
 The processing capacity of the device is at least in tons
of waste separated like paper, plastic and metals.
Manufacturing Capabilities

7. Environmental Clearance
 Implementation of the said proposal has least
deleterious environmental impact but can other way
have huge impact on pollution control and power
management issues.
 Clearing the garbage reflects the environmental
clearance.
 The equipment used in device is not harmful to
environment.
 The garbage composition device makes the
environment look good.
 It is eco-friendly

8. Team Composition with Milestones and
Timelines
Team :
G.OmSuraj,
P.JayaChandra.
Mentor: Dr.J. Somlal (K L deemed to be University)
Milestones:
X- First year - 50%
Y - Second Year – 80%
Z – Third Year – 100% done
Time Line: 3 Years

9. Financial utilization for the Proposed
grant-in-aid fund
This for Prototype