Dangers Of Texting And Driving

Dangers Of Texting And Driving
Danger of Driving Under an Influence In the newspaper and television news cast people see the
devastation that a teenager recently died in a car accident due to the fact they were texting their best
friend. This moment is very depressing to all of teens friends and families. If only he or she was not
texting and waited to text them at a stop light or when they arrived at their destination. With the
advancements of technology in the world cars are trying to prevent these such actions but everyone
finds a way to text that certain someone back. Texting however is not the only negative to driving.
Many young adults drive under the influence of alcohol. Even though there are laws for driving
under such conditions the young adult still continues to break the law. These are two examples of
horrific actions behind the wheel of a vehicle. Texting behind the wheel put the driver in a condition
where they are not looking at the road. While drinking and driving delays the reaction time of the
driver. Both of these situations are dangerous distractions for the driver and can result in an accident
or even death. Back when texting on phones was not popular many accidents were caused by
drinking and driving. Even though texting and driving is becoming more heard of drinking and
driving still occurs. Drinking and driving is still illegal today, once someone has reached the limited
level of 0.08% blood level concentrate. According to the National Highway Traffic Safety
Administration there
... Get more on HelpWriting.net ...

Auto Mechanic Essay
Car repairs are inevitable. When a vehicle is serviced, or repaired it is a matter of safety and
convenience that the repairs are done properly by a qualified auto mechanic. As the vehicle owner, it
helps to have some knowledge of common car repairs and what to expect. However, it is just as
helpful to know that the mechanic has done a proper job with the repairs.
Auto mechanics are specially trained individuals in automobile maintenance. They can diagnose and
service any type of automobile, and have the certification and training to prove it. Although there is
one main automotive organization that evaluates auto mechanic training programs against industry
standards, there are several different certifications and skill levels; there is another organization that
tests and certifies mechanics based on the industry standards. Most technicians are trained in one of
four fields: ... Show more content on Helpwriting.net ...
For instance, some national chains will focus only on oil changes, tire rotations, or tune–ups because
these kind of repairs only require minimal skill and training; these chains will often hire employees
and train them within. In fact, many vehicle owners have learned to do this type of servicing
themselves in order to save money. To insure the servicing is done properly, there is always a
certified mechanic working in the shop to double–check the mechanic's work.
These repair outlets tend to be less expensive than the other chains because they save money on
wages by having only one certified mechanic, which allows them to pass the savings on to the
customer. Other repairs such as brakes, steering and suspension, and the cooling system will require
a more knowledgeable technician, and there are reliable auto repair chains that focus on this level of
expertise. There are many advantages to visiting one of these trusted national chains instead of an
unknown

Auto Parts Industry
On the Road: U.S. Automotive Parts Industry Annual Assessment Office of Transportation and
Machinery U.S. Department of Commerce 2011 Table of Contents Tables and Charts Index
Executive Summary Introduction Automotive Parts Sector Definitions Overview of Market
Conditions Economic Indicators 2 3 4 4 5 8 9 9 11 13 15 17 17 18 18 19 22 26 28 29 30 32 33 35
Automotive Parts Markets Original Equipment Aftermarket Remanufacturing Employment Trends
Leading Industry Stories Visteon Bankruptcy Comes to an End Other Industry Developments
Counterfeiting Alternative Fuels Advanced Technologies In–Vehicle Electronics, Engineering,
Safety, and New Technologies International Developments and Trade China Japan South Korea ...
Show more content on Helpwriting.net ...
Still, automotive parts suppliers and automakers face another couple difficult years and most
analysts don't see the automotive market improving significantly until 2012. International U.S.
automotive parts exports increased 36.2 percent to $58.1 billion in 2010 compared to $42.7 billion
in 2009. Most of the exports (84 percent) went to Canada, Mexico, European Union 151 (EU–15),
and Japan in 2010. Automotive parts imports were $90.9 billion in 2010, up 44.3 percent from $63
billion in 2009. Mexico, Canada, Japan, Germany, and China combined accounted for $71 billion, or
78 percent of total U.S. imports of automotive parts. Specifically, imports from China increased 35
percent from 2009 to $10 billion in 2010. The overall U.S. automotive parts trade deficit in 2010
was $32.8 billion, up 61.3 percent from 2009 levels. The European Union 15 countries are Belgium,
Denmark, France, Germany, Greece, Ireland, Italy, Luxembourg, the Netherlands, Portugal, Spain,
the United Kingdom, Austria, Finland, and Sweden. 1 International Trade
Administration/Manufacturing and Services/Office of Transportation and Machinery Introduction
Automotive parts consumption is linked to the demand for new vehicles, since roughly 70 percent of
U.S. automotive parts production is for Original Equipment (OE) products. The remaining

A Magneto Rheological Shock Absorber
A magneto rheological shock absorber or magneto rheological damper is a damper filled with
magneto rheological fluid, which is controlled by magnetic field, usually using an electromagnet.
This allows the damping characteristics of the shock absorber to be continuously controlled by
varying the current in the electromagnet. This type of shock absorber has found applications in
semi–active vehicle suspensions which may adapt to road conditions, as they are driven by
continuous sensor monitoring and also with prosthetic limbs. Fig. No.1. Magneto Rheological
damper
Above figure shows the schematic of magneto rheological damper which is consist of cylinder,
piston, piston rod and electrical winding. There are three types of the magneto rheological damper
are,
Mono tube MR damper
Twin tube MR damper
Double–ended MR damper
MONO TUBE MR DAMPER
From the three types, the mono tube is the most common since it can be installed in any direction
and it is small in size. A mono tube MR damper, shown in Figure, has only one store for the MR
fluid and it is associated with accumulator mechanism to accommodate the changes in volume that
results from piston rod movement. The accumulator piston is used for providing a barrier between
the MR fluid and a compressed gas (usually nitrogen) that is used for accommodating the volume
changes of liquid that occur when the piston rod enters the housing. Fig. No.2.Mono tube MR
damper section view
TWIN TUBE MR DAMPER
The twin tube MR damper uses

The Importance Of Mechanical Engineering
Mechanical Engineering
Samaj vassar
"Manufacturing is more than just putting parts together. It's coming up with ideas, testing principles
and perfecting the engineering, as well as final assembly" (Dyson). You may find yourself asking,
"What is engineering?" It is defined as "the application of science and mathematics by which the
properties of matter and the sources of energy in nature are made useful to people" (Merriam
Webster). However, there has always been one specific aspect that interests me, and that is
mechanical engineering and its impact on the world. Oddly enough, when you ask what mechanical
engineering is you'll get hundreds of different answers. Although, there is a pretty unanimous
misconception about this subfield; ... Show more content on Helpwriting.net ...
(Environmental Control Engineer Career Information). In latent terms, environmental control
engineers help control air pollution, water reclamation land preservation while managing material
that is hazardous to the environment. Without these engineers dedicating their lives to this field we
may have never made advancements such as the Cyclone. In the book Air Pollution Controlling
Engineering, the author Lawrence K. Wang described cyclones as "...one of the most utilized drives
for solid gas separation. It works by forcing gaseous suspensions to flow spirally within a confined
space so that the particles are expelled toward the wall of the vessel by centrifugal; force... cyclones
have a wide range of industrial applications either in product recovery or gas cleaning" (Wang, 98).
By doing so, cyclones help to remove particulate matter which is is a complex mixture of extremely
small particles and liquid droplets that get into the air. If inhaled, these particles can affect the heart
and lungs and cause serious health effects from the air. They are able to remove 50–99% of all
particle pattern from the gas that is in

Technical Innovation, Policy Making And Industrial Strategy
Recommendations
While Autonomous car presents enormous potential and benefits, there is a long way to go before
we achieve fully self–driving automation. Going forward, there are three areas we would like to
advise on: technical innovation, policy making and industrial strategy.
Firstly, there have been active innovations in modular functionalities. In the technologies list below,
most of them are still in the early stage of the S–curve and it will take long time for the trial, testing
and adoption (for example, it took almost 50 years for the complete adoption of airbags), especially
when safety is the number one concern in the automobile sector. Therefore, open and continuous
innovation is the essence to improve functionality, technical performance and reliability, and to
address technical issues.
Automatic braking: it senses an imminent distance with another vehicle or a velocity related danger
and responds either by pre–charging the brakes or by applying the brakes to slow the vehicle
without any driver input.
Electronic Stability control: a computerized technology improves vehicle's stability by detecting and
minimizing skids. It automatically applies the brakes and helps to minimize a loss of control. ESC
compares the driver's intended direction to the vehicles actual direction.
Automatic cruise control: it keeps the car at a constant speed by taking over the throttle of the car. It
also maintains a set of distance between it and the car in front. It needs a

A Report On Automotive Service Technician
Automotive Service Technician
Main duties:
Receive and review work orders with supervisor and co–workers.
Inspecting motors in operation, road testing vehicles and testing automotive systems and
components using electronic/computer or other testing devices to diagnose problems and isolate
faults
Adjusting, repairing or replacing parts and components of automotive systems including fuel, brake,
steering and suspension systems
Performing scheduled maintenance service such as oil changes, lubrications and tune ups
Testing and adjusting repaired systems to manufacturer 's specifications
Special duties:
It is crucial that automotive service technician locate any problems a vehicle may have even if the
job was not requested by the ... Show more content on Helpwriting.net ...
There are risks involved in this job. Workers experience ergonomic pain in their backs due to the
lifting and bending they endure on the job. Moreover workers are at risk of chemical hazards like
battery acid, antifreeze, and inhaling toxins from cleaning products.
Required skills:
Reading:
Reading is essential for automotive service technicians because they need to read comments on
work orders to understand problems and repair schedules. Workers need to read instructions and
safety warnings on product labels read reports describing recalls and faults of specific model of
automobiles. They also need to read repair manuals to diagnose ad fix mechanical faults. Overall
reading is found throughout the workplace and is mandatory for all automotive service technicians.
Document use
Read safety symbols on movable parts.
Fill out a variety of documents, such as job estimates, warranties, inspection reports and accident
forms.
Study schematic diagrams for information on electrical, hydraulic, coolant and other systems.
Use work orders to find information on vehicles to be serviced, such as repair needs and
descriptions of previous problems.
Find automotive system faults by interpreting diagnostic graphs and integrating information from
other sources.
Numeracy
Measure tire pressure using a gauge.

Monitor levels of oil, transmission fluid, brake fluid and engine coolant.
Calculate the total cost of repair jobs including parts, labour rates and

The Development Of Carbon Fibre
The Development of Carbon Fibre in Formula 1. What is carbon fibre? Carbon fibre is an extremely
strong material that is also super lightweight. The material has many uses in engineering and design,
and this case study will discuss the advantages and disadvantages. McLaren first introduced carbon
fibre into chassis construction of the MP4 in 1981. Apart from the cars engine, wheel rims and
gearbox, all twenty–two Formula 1 cars that competed in the 2014 season bodies, are made of
carbon fibre. [1] Properties of Carbon fibre. Design technicians and engineers love to use carbon
fibre in manufacturing as it has many desirable properties. First of all is its strength. Carbon fibre is
five times stronger than steel and is twice as stiff [2]. The strands of carbon are lined up parallel to
each other when producing a sheet. For maximum results in strength, the fibres must be parallel with
the forces that will act upon that element, this is to make sure it can withstand the forces going
through the object when in use. Carbon fibre is also very lightweight. This property is a huge
advantage in car production. By using carbon fibre instead of steel in building car components
reduces the weight of the car by 60% [2]. In turn, this reduction in weight cuts the car's fuel
consumption by 30% and reduces greenhouse gases and other emissions by 15%[2]. Below shows a
detailed table of the strength to weight ratio of carbon fibre. Carbon fibre also shows that it is a
leading 21st

Communication Is The Gap Between Certainty And Doubt Essay
Communication bridges the gap between certainty and doubt. The automotive industry demands
clear and effective communication. A doubtful and uncertain customer may feel unsafe in their
vehicle. Here we evaluate the power of communication in the automotive industry and how it is
achieved. As an auto shop sales associate, what I go over with the mechanic determines what I relay
to the customer. Communication, or a message, often travels like a waterfall; rapidly breaking down
as its passed over to the next receiver. It is up to me to ensure the correct information is passed on as
clear as it was to me. This is done in a number of ways through language, gestures, visual
description, and emotion.
Drawing ideas and information from multiple sources, we will analyze four critical communication
factors. By the end of this paper, you will fully understand the importance of communication within
the automotive service industry. Ultimately, think of how these following lessons can be applied to
your profession.
"Sir? We've got your vehicle all figured out. Everything under the hood is looking great. There are a
few things though you should be aware of." Every vehicle owner dreads those last words. It stands
between the common $1,000 service bill and use of this year's tax return. The automotive service
industry streamlines billions of dollars and ensures the safety of millions of lives. What the customer
hears from the service writer is important, and what the service writer

State Of Statement Of Purpose For Mechanical Engineering
Statement of Purpose
Mechanical Engineering has not only given us inventions such as the car that have improved our
lives but also captured the imagination of the world through space travel and the Apollo missions.
To achieve breakthrough in technology, we will always need great mentors, state–of–art
infrastructure and real motivation and Lawrence Tech is one of them.
My four year academic curriculum in Mechanical Engineering at Nagpur University has offered me
the perfect blend of theoretical subjects as well as laboratory work. These academic years helped to
build solid foundation in the field and made me keen to learn Basics of automotive engineering as
part of my graduate syllabi. The 'Combustion Phenomenon' topic in 'Advanced I.C. Engines' ...
Primarily, course has designed to provide a strong foundation across the breadth of automotive
engineering and sufficient flexibility so that the degree is tailored to my background and career
objectives. Secondarily, accessibility of the state–of–art laboratories under supervision of range of
notable faculty namely, Prof. xyz, Prof. xyz and Prof. xyz and their work in respective fields are
commendable. Lastly, it would be once in life time opportunity to study in beautiful campus and the
city Southfield accompanied by culturally diverse

Crime Perspective
Offenders' Perspective Paper
Crime Causation and Criminal Justice Policy–CJ593
Dr. M.J. Smith
Lindy Boone
1 December 2015
1. Chapter Summary: In this study, the authors address the issue of automotive theft, specifically
focusing on key theft and its effectiveness and commonality among offenders. (Copes and
Cherbonneau, 2010.) The authors obtained the information used in the study from interviews with
two groups. The first group was comprised of 42 individuals on community supervision within a
metropolitan Tennessee area. The other group was made up of 12 incarcerated auto thieves from
Louisiana. The individuals interviewed had varied skill levels and backgrounds. The authors
identified various methods used to obtain the vehicles, ... Show more content on Helpwriting.net ...
Conclusion Regardless of the technological advances and efforts made by automobile
manufacturers, the burden of responsibility in preventing automobile theft by use of key lies on the
owner of the vehicle rather than on the thief. By reducing the number of opportunities presented to
offenders, theft will indefinitely decline. It is common sense that the occurrences of most crimes can
be greatly reduced through proactive rather than reactive measures.
References:
Copes, H. & Cherbonneau, M. (2010). The key to auto theft: Emerging methods of auto theft from
the offenders' perspective. In P. Cromwell (Ed.), In their own words: Criminals on crime. (5th Ed.)
(pp. 69–89). New York, NY: Oxford University Press.
Cullen, F., Agnew, R., & Wilcox, P. (2014). Pressured Into Crime: General Strain Theory. In
Criminological Theory: Past to Present (5th ed., pp. 202–211). New York, New York: Oxford
University Press.
Cullen, F., Agnew, R., & Wilcox P. (2014). Routine Activity Theory. In Criminological Theory: Past
to Present (5th ed., pp. 469–479). New York, New York: Oxford University

Collision Avoidance System : An Automobile Safety System
CAR COLLISION AVOIDANCE SYSTEM
Kirti
Department of Electronics and Communication Engineering
Haryana (India)
Email: kirtidahiya7009@gmail.com
Abstract: A collision avoidance system is an automobile safety system designed to reduce the
rigorousness of a collision. Also known as precrash system, forward collision warning system, or
collision mitigating system. It uses radar and sometimes laser and camera to detect an imminent
crash. Once the detection is done, these systems either provide a warning to the driver when there is
an imminent collision or take action autonomously without any driver input by braking or steering
or both. Collision avoidance by braking is appropriate at low vehicle speeds. while collision
avoidance is suitable at higher vehicle speeds.[1] Cars with collision avoidance may also be
equipped with adaptive cruise control, and use the same forward–looking sensors. Keywords:
collision, congested, Traffic safety, transmission, sensor networks .
Introduction: Collision Avoidance systems, a subsequent step to collision mitigation, are one of the
great challenges in the area of active safety for road vehicles. In India the total annual deaths due to
road accidents has crossed 1.18 lakh, according to the latest report of National Crime Records
Bureau (NCRB). If these deficiencies are not controlled at early stages they might cause huge
economical problems affecting the road side networks. The main part of the work was to carry out a
feasibility

Mahindra Advantage
'Reasons to buy Mahindra XUV 500 The economy of India is the tenth–largest economy in the
world by official GDP (Gross domestic product) of $2.047 trillion and the third–largest economy by
PPP (Purchasing power parity) of $7.277 trillion retrieved on October 8, 2014 from the IMF
(International monetary fund). India is one of the G–20 major economics, a member of BRICS and a
developing economy that is among the top 20 global traders according to the WTO (World trade
organization) with a GDP growth of 4.7% in 2013 and an estimated growth of 5.6% in 2014. India
was the 19th–largest merchandise and the 6th largest services exporter in the world in 2013 with
exports of software, petrochemicals, agricultureproducts, engineering goo, transportation ... Show
more content on Helpwriting.net ...
The Mahindra group has a presence in agribusiness, aerospace, aftermarket, automotive,
components, construction equipment, energy, defence, farm equipment, etc. The Mahindra group is
considered to be one of the most credible Indian industrial houses with market leadership in utility
vehicles as well as tractors in India. The Mahindra group automotive is names Mahindra and
Mahindra Limited (M&M), it is an automotive producing corporation. Mahindra and Mahindra
Limited is ranked as the 10th most trusted brand in India, by The Brand Trust Report, India Study
2014. The Mahindra and Mahindra Limited was ranked 21st in their list of top companies of India in
Fortune India 500 in 2011. The automotive manufacturing corporation major competitors in the
Indian market include Maruti Suzuki, Ashok Leyland, Tata Motors, Mercedes–Benz, Hyundai,
Toyota and others. The Mahindra XUV 500 is a mid–size SUV manufactured by the Indian
automotive corporation Mahindra and Mahindra Limited and was launched in September 2011 and
by June 2012 the Mahindra XUV 500 was available in 19

Automotive Career Progression
I chose the Automotive Service Technology course because I enjoy working with my hands and
being able to do something that most people can't do. I like having the guarantee that when I have a
problem I will be able to figure out how to solve that problem in the most effective way possible. I
also love to help my papa, Curt, while he's working on whatever his project for the summer is,
sometimes we are fixing up some part of the house and other times we fix up all of the bikes we
have. I also enjoy working with my hands and being able to do something that most people can't
do.I want to learn the basics of cars and how to fix family's and friend's cars including my own so
when we have car problems I can figure out what the problem is and how to possibly fix it. After
high school, I planned on going to college to pursue a music career I know that it's very ... Show
A few of these new options are a service writer, a service manager, a parts supply specialist, and
towing and recovery. A few of the specific employment opportunities that I have found here in
Marquette include; working in the Auto & Tires section of Walmart, Midas, Joe's Automotive, etc.
Me being enrolled in the MATMC would help me get a jump start in the automotive service
technology field and teach me what I need to know before going into an automotive repair job
where not many women work and there are many places that could use hard workers. I feel I am a
good fit for the MATMC because I am a dedicated worker and once I start something I don't stop
working for it until I get the results I want or if I end up getting a better result. I am the problem
solver in my family and try to help others in any way possible at school, sports and any of the few
places I volunteer. If my what I am planning on gets thrown off I am usually good at finding an
alternate route to get back on track with what I am looking

Physics Of Semi Active Suspension System
...or paste your text here Optimization of Sequential damping in Semi–active Suspensions with
Magneto–rheological fluid to control of Vibrations and Acoustics
*Sourabh Joshi1, **Piyush Nandwal2
1. Acropolis Technical Campus, Indore (M.P.)
In the case of semi–active suspensions with sequential damping, the damping forces are zero or
rather very small as long as the sprung mass is moving away from its static equilibrium position and
suddenly increases when the system is returning to the static equilibrium position. The basic idea of
this semi–active control strategy is to balance the elastic force by the damping force in order to
reduce or even to cancel the forces transmitted through the suspension as long as the spring and
elastic forces ... Show more content on Helpwriting.net ...
Semi–active control systems combine the best features of the passive and active ones. They have
almost the same environmental robustness, mechanical simplicity and low cost as passive devices
and can offer the adaptability of active control systems without requiring the associated large power
sources.
In this paper the effect of semi–active suspension with Magneto–rheological fluid to control the
damping characteristic of the system and balanced logic on which the system works is presented.
The damping characteristics are controlled by modulation of fluid–flow orifices, dry friction forces,
electric or magnetic field applied to electro rheological or magneto rheological fluid dampers. The
balance logic is assumed to be achieved with a variable dry friction damper controlled by the
modulation of the normal force applied on the friction plates. For the models with semi–active dual–
rate dampers, the value of the equivalent suspension damping coefficient is a function of the relative
velocity of the sprung mass with respect to the wheel subsystem.
Key Words: Transmissibility factor, Magneto–rheological fluid, Sequential damping
INTRODUCTION
Isolation of passenger from induced shock and vibration is the important task of the suspension of
any ground vehicle. Most suspensions have passive springs and dampers with rather limited
vibration isolation performance, both for linear and nonlinear restoring or damping characteristics.
Their transmissibility

What Makes A Vehicle Work?
Have you ever stop and look at a vehicle and thought to yourself what is behind a vehicle to make it
work? Well now is the time and start learning about the basics components that a vehicle must have
to be considered a vehicle. In Order to call a vehicle a vehicle it must have a motor, suspension and
wheels and tires. Although you must be this guy is crazy a vehicle must have more things and yes
you're correct but let's put it this way with either of the three things I said you just have a pile of
metal put together but not a vehicle. But allow me to explain how the motor, suspension and tires
and wheel work together to create the vehicle. Have you ever heard the saying that the motor is the
heart of the vehicle? Well it is true since the motor starts working and starts giving power power to
the rest of ... Show more content on Helpwriting.net ...
So many choices to choose from and can't make up your mind. But you could also be the cheap
person who wants to stay with their OEM stock tires and wheel and not worrying about what tires
they need and main reason not worrying about breaking their bank. But for the people who decided
to go with aftermarket have to worry about which tires they are going to mount on their aftermarket
rims as Kirk T. VanGelder in "CDX Automotive:Fundamentals of Automotive Technology Principle
and Practice" explains that "Different tread patterns give manufacturers the ability to design tires for
special applications, such as rainy, snowy, muddy, highway, or high–performance driving(790)."
meaning that if you decided to go with aftermarket tires you have to choose from a mass variety of
tires depending on the purpose you want to use them for. Since there are Directional tread pattern,
non directional tread pattern and ect. But also the buyer must know how fast they plan on running
because tires are also manufacture to go to a certain speed and not exceed that

A Brief Note On Design An Electric Vehicle
Introduction
Detail of Project
Introduction
The project is to design an electric vehicle that has to be road worthy and comfortable to drive off
road as well. We are doing These because it is the future of Automobile industry. These is fully
ecofriendly and these is one of the best solution to decrease the carbon emission in our environment.
EV which we are design is Fully built from Scratch, which is look like a Wheelie jeep. Because its
roadworthy so we have design this car under the concern of the New Zealand Transport rules and
regulation. The car is two doors with two Seating capacity. we have to make it lighter and off road
drive so we choose the poly carbonate shell material. The car is fully electrically automated with
electric power steering and some other feature. It also has an Electrical winch which is detachable at
front or back. It is a four–wheel drive and with high torque and doesn't produce any excessive
sound. The car has a AC motor as drivetrain and the energy source for drive is a lithium Batteries
which is highly efficient as compared to other battery. We design good breaking system because
electric motor has a very high acceleration as compared to CI cars. EVS running cost is much lower
and very less maintenance. It has a range of 80 km per charge and it can be charge in your garage
240 V plug socket. The money spent on the EVs has reasonable and payback to us.
Reason for amendment
We are working to design a new electric car so we have to

The Advanced Technology in Cars
Cars have a lot of technology can save you from roads dangerous , seat built ,air bag ,and A.S.B .All
these new technology can reduce and protect the driver from dangerous that happen on roads . Seat
built can reduce damage when accident happen . Air bag can save you from dangerous hits that
happen for car . A.B.S is new technology come to the world to save people from sliding, and also it
is one of car safety technology.
ABS Anti–lock braking system (ABS) is an automobile safety system, that allows the wheels on a
motor vehicle to maintain tractive contact with the road surface according to driver inputs while
braking. Preventing the wheels from locking up (ceasing rotation) and avoiding uncontrolled
skidding, it is an automated system that uses the principles of threshold braking and cadence braking
which were practiced by skillful drivers with previous generation braking systems. It does this at a
much faster rate and with better control than a driver could manage.
ABS generally offers improved vehicle control and also decreases stopping distances on dry and
slippery surfaces for many drivers, however, on loose surfaces like gravel or snow–covered
pavement, ABS can significantly increase braking distance, although still improving vehicle control.
Seat built A seat belt, also known as a safety belt. It is a vehicle safety device designed to secure the

Pros And Disadvantages Of Zahnradfabrik
Submitted To
Prof. KULBIR SINGH
Submitted By:
GROUP–7
ADITI BHANDAKKAR 2015073
AMAN KUMAR MALHOTRA2015079
ANIKET THAKARE 2015085
ANSHUMAN THAKUR 2015085
SHITAL GUPTA 2015115
INTRODUCTION
ZF FRIEDRICHSHAFEN AG
Zahnradfabrik is a German car parts maker which was established in 1915 in Friedrichshafen,
Germany by luftschiffbauZeppeinGmbh to produce gears for Zeppelins and other airships.
Zahnradfabrik is agerman word which means 'Gear factory'.
Specialising in engineering, it is primarily known for its design, manufacturing and research and
development activities in the automotive industry.Zahnradfabrik is a worldwide supplier of chassis
... Show more content on Helpwriting.net ...
Since there are pros and cons to each and everything there are a few disadvantages as well.
There are capacity balancing problems. The way that you carried your supplier manufacturer
relation previously gets disturbed and therefore working with the same supplier under the same
environment gets a little difficult.
There is a decreased flexibility. The same problem that we mentioned above is that working or
carrying out two different functions under the same roof creates a higher level of difficulty for them.
Creates a barrier to market entry. As we saw before as well that whenever there is a vertical merger
the firm becomes stronger and it creates a market barrier for the other firms to enter. This perfectly
gets associated with the acquisition that we have in this case because turning out to be a market
leader after a second largest acquisition in this case makes it a market leader of a perfect sort.
EFFECTS OF THE ACQUISITION:
REVENUE:

The revenue for ZF & TRW automotive initially after the merger was $ 4442 Million. Three months
after the merger the revenue increased to $ 4593 Million. This was mainly because of the stature of
the acquisition perceived in the automobile market by the

Becoming A Licensed Master Mechanic
In the technologically advancing world country that we live in, everything has to be fast and
reliable. We want it right then and now, and if not we move on elsewhere. If the fast–food place has
a noticeable line in the drive thru most people just go to another more "convenient" place. The
growing inconvenience of commercial breaks has led to prosperity by the online media streaming
services such as Netflix and Hulu. If where we get our food and TV from has to be fast and reliable
then the demand for your car to be is an afterthought. Who is there to provide their services that
keep own country and daily lives moving? These men and women have many names and specialties.
Most would call them mechanics or automotive technicians. The most knowledgeable and
experienced of this necessary trade are master mechanics. In order to become a licensed Master
mechanic you have to be a lifelong student of the trade, have years of education and experience, and
love and respect for the trade itself.
Proposed Project It has been known for centuries that complex machines need regular maintenance
and repair when needed. From the first clocks ever created to the international space there were
someone who specialized in repairing and upkeep them. This is especially necessarily for our
everyday vehicles today that allow for us to have such a mobile life style. With the everyday wear
and tear that we put on vehicles today, it only makes sense that there's a demand for individuals who
can keep

Vehicle Safety Essay
In the recent years, the United States government has been enforcing stricter mandates on auto
manufacturers to create safer vehicles, and on construction companies to create safer roadways.
Matthew Jensen wrote a dissertation for the Graduate School of Clemson University titled, A
Methodology for the Analysis of In–vehicle Operating Data and Design of Intelligent Vehicle
Systems for Improved Automotive Safety. In his abstract, Jensen evaluated the future of vehicle
manufacturing and traffic–related incidents. Of course, every year more vehicles are manufactured,
which in theory means the number of miles driven in vehicles increases. He points out how the
World Health Organization (WHO) found that automobile crashes was the ninth ... Show more
content on Helpwriting.net ...
Generally speaking the items taken into account as vehicle speed, RPM, and throttle position as well
as many other parameters. More recently developers to begin using accelerometer and global
positional systems (GPS) to provide feedback to the driver (Jensen). Yet another critical component
of safe driving is the human–vehicle interface (HVI), very similar to the human computer interface/
interaction (HCI). HVI is used to produce sounds, visual aids, and other forms of feedback such as
the haptic steering wheel to alert the vehicle operator of the roadway conditions (traffic, construction
environment, pedestrians). Since automobiles are operated by single individuals, the primary means
of receiving feedback are visual. Since the introduction of HVI "the cost for real–time control
systems decreases" and the new safety features provide information that hopes to improve decision–
making response time (Jensen).
The article describes three formats of in–vehicle feedback; visual, haptic, and audio. Each of the
three formats to be broke down into various systems and functions. Very similar to a database
containing tables, rows, and attributes. In the visual table, there are four rows one of which is the
dashboard. The dashboard contains several aids including gauges, on–board diagnostics, GPS, and
lamps. The haptic table contains the break/ throttle row, were pedal pulsation will notify the operator
of activated antilock–brakes or traction control. Jensen

Case Study Of Magneti Marelli
COMPANY
Magneti Marelli is an international Group committed to the design and production of hi–tech
systems and components for the automotive sector. With more than 38.000 employees, 89
production units, 12 R&D Centres and 26 Application Centres, the Group has a presence in 19
countries and supplies all the most important car makers in Europe, North and South America and
Asia. Magneti Marelli mission, as a worldwide automotive parts supplier, is to make its key
technologies available to its final customers at an affordable price, by matching high quality and a
competitive offer, technology and flexibility. Magneti Marelli is providing its know–how and wide–
ranging expertise in electronics, through a process of ongoing innovation and environmental ...
It operates in the Research & Development and Manufacturing sector, with various production
plants in Italy and throughout the world, and it is made up of different business areas. Magneti
Marelli is looking for innovation and talent. It offers opportunities for professional development and
growth. Therefore, it offers great possibilities for professional experiences abroad and with
diversified, inter–functional career paths. The professional areas experiencing the strongest growth
are Research & Development (R&D) and Manufacturing, both in Italy and abroad. In detail, the
professional areas of development and integration are as follows After Sales
Strictly in the aftermarket area as MM operates as spare parts distributor in the IAM (Independent
After Market) segment of the motor vehicle market (automobiles and commercial vehicles).
Communication and External Relations
It guarantees proper communication and management of MM's image towards the outside world,
according to company values and business objectives. It deals with the management of relationships
and relations with the media, the press, the investors, the institutions,

Case Study Of Proton
POOR IMPLEMENTATION OF THE MARKETING PLAN IN THE REAL WORLD It all started
with Proton's chairman Tan Sri Mohd Khamil Jamil expressing his disappointment to Business
Times, saying Malaysians are not supporting Proton, a product made from our national pride.
Comparing against the Japanese and Korean markets, which have strong support from their
domestic market, the chairman could not understand why Malaysians would rather pick other
models despite Proton achieving improvements in their products and technology a statement was
later issued by Khamil that the remark was taken out of context and he did not mean what is being
implicated. Perception Malaysia was a very different place then and for the general populace, there
was a great deal of pride associated with Proton. But pride alone doesn't sell because even back
then, the reliability of the Japanese automakers was established and Proton's first ... Show more
content on Helpwriting.net ...
This is something all car manufacturers should be aware of and coupled with the certainty of
increasing cost of manufacturing, Proton needs to find ways to increase sales so that production
could be ramped up for better economies of scale. If price advantage is the position Proton wishes to
take in positioning its models, then the two largest markets in the world – India and China – become
a priority. With India, affordable small cars account for about 60% of the total market but more than
25% of vehicles in India are diesel powered. Proton has been testing a Global Small Car with lots of
local sightings but Proton has no key diesel technology to speak of so even if it does manage to
enter India, it may not have the right product offering to gain a foothold there. China, on the other
hand, has Youngman to market the Gen. 2 and Persona and is rebranded as

Why Is Seatbelts Important
Nowadays, most people own cars and many people are riding cars on a daily basis. Although we
sometimes hear on the news about people dying by car accidents, there are much more cases when
people are not injured by car accidents thanks to the range of safety equipment designed to keep the
people on the car safe in the event of a car crash. The range of safety equipment is supported in the
background by the modern advanced science. First of all, seatbelts are installed in every kind of car
that is being sold. Seatbelts take a very important role in cars because it works in many ways to
protect the passengers from danger and car accidents. One of the reasons why seatbelts are
important is because seatbelts reduce the speed of a body of a passenger as it gets an experience of
an abrupt decreasing of speed. Since the velocity of the car and the passenger is independent, even
when the car crashed into a wall and the velocity suddenly decreases to zero, the body of a
passenger will want to still move forwards. The second reason is that seatbelts prevent passengers
from slamming parts of their ... Show more content on Helpwriting.net ...
The antilock braking system was made to support the driver to control some steering dexterity and
avoid skidding while putting on the brake. Anti lock brakes were first introduced in the mid– 1980s
and became a major equipment of a mobile in cars that were sold in Canada. The antilock braking
system allows the driver to keep control of the car and uses wheel speed sensor to take a decision
whether any wheels are trying to lock up during the action of braking. Then the system works a
series of hydraulic valves restrict or decrease the braking on those wheels, which prevents skidding
and allows the driver to maintain steering control. Anti lock brakes are one of the major systems that
save passengers for car

Car Essay
Shifting gear to gear and racing down the street can be very fun. But in order to be able to actually
shift the gears and get the vehicle to move, their are many steps involved. With the perfection of
these steps you will be able to drive the vehicle smoothly and efficiently. The equipment that will be
needed for this process is usually the same for every vehicle. At a minimum, you will need an open
lot, a hill near by, and a manual transmission vehicle. Once you get the necessary equipment, it is
time to get in the driver's seat of the vehicle. Once you are in the driver's seat of the vehicle, grab
onto the gear lever and move it left to right a couple of times. If the lever is moving side to side, the
vehicle is in neutral. ... Show more content on Helpwriting.net ...
To shift from first gear to second gear, you will depress the clutch all the way down, and move the
gear lever straight down into second gear. If the gear lever goes into neutral, second gear is all the
way left and straight back. When into the second gear notch, start to let out the clutch. When the
clutch is out, give the vehicle gas and continue to keep driving. Continue to watch the RPM gauge is
second gear as well. When it gets back up to 3000–3500 it is time to shift gears again. Push the
clutch all the way down, and move the gear lever into neutral and straight up. This will put you into
the third gear. When into the third gear and the clutch is all the way down, start to release the clutch
and start giving gas when the clutch is about half way out. Continue to give the vehicle gas until the
clutch is all the way out and drive as normal. When into third gear, the RPM will still be climbing
up, but it will start to go up slower and slower as the gears go up. When the RPM gets back up to
3000–3500, press in the clutch. With the clutch pushed back in, move the gear lever straight down
all the way. This will put it into fourth gear. With the gear lever in fourth gear, start to release the
clutch and press back down on the gas. When your foot is off of the clutch, continue to drive.
Watching the RPM gauge again, drive until the RPM's hit 3000–3500. It is then time to shift into

Competitive Analysis : Porter's Five Forces Framework
Competitive Analysis Lauren Herter SIC Code: 3711 Motor vehicles & Passenger Car Bodies [1]
NAICS Code: 336111a Car & Automotive Manufacturing in US Industry definition: "Companies in
this industry manufacture cars and automobile chassis. These operations, which are referred to as
automakers, typically produce cars, including electric cars, in assembly plants. The manufacture of
light trucks (e.g. vans, pickups and SUVs), heavy trucks and motorcycles is excluded from this
industry." [2] Porter 's five forces framework assesses the competitive pressures a company faces
within the industry. The five forces of competitive pressure include: competition from rival sellers,
competition from potential new entrants to the industry, competition from producers of substitute
products, supplier bargaining power and customer bargaining power. The model helps us determine
the strength of competitive pressures and profitability of an industry. [3] FORCE STRATEGIC
SIGNIFICANCE New Entrants Weak Substitutes Moderate Rivalry within the Industry Strong
Suppliers Weak Customers/Buyers Strong New Entrants The threat of new entrants refers to the
threat posed by new competitors within an industry. If it is easy for new firms to enter the industry
barriers to entry are low and the threat of new entrants is high. A profitable industry attracts more
competitors. Economies of scale, learning curve effects and other macro factors impact the nature of
an industry 's

Mechanic Career Research Paper
Mechanics are people who knows what is wrong with an automobile and how to fix one, There are a
lot of people in this career field, about 701,000 people are employed in this career in the United
States. Mechanics have quite a bit of duties to pursue, some of these duties are to identify
mechanical problem, often by using computerized diagnostic equipment. They also have to test parts
to make sure they all work properly. If they do not work properly they then explain to their clients
what automotive problems they are having, and inform them of the repairs they will make and what
the cost will be. Most Mechanics work full time and many also work evenings or weekends.
Overtime is very common for this career. You can be either male or female to qualify for this job
field. You will also have to qualify with the education requirements. It will be required to have a
certificate for an automotive technology training program or 2 years in college, which is an
associate's degree. Anyone male or female could easily meet those qualifications if you put your
time into it. ... Show more content on Helpwriting.net ...
Average annual salary for Mechanics is around $36,000 per year. That is a higher salary than most
average jobs that require a higher education. They make about $17.60 per hour, depending on your
experience also. Highest earners in the field make about $61,210 annually, and the lowest take home
about $20,920 annually. Mechanics have many positions but, master mechanics can manage all of
the positions. Some of the positions would be a brake repairer, they adjust brakes, and handle other
repairs on brake systems. Another position would be front–end mechanics, they balance and align
wheels, repair steering mechanisms and also suspension systems. There is also a transmission
technician and rebuilders, they work on couplings, hydraulic pumps, gear trains, and parts of

Exerpose For Statement Of Purpose In Mechanical Engineering
Statement of Purpose
I have always been besieged by creative spurts to give shape to my imaginative streak. I revelled in
making toys from scrap and cardboard and an opportunity to come across a magazine about cars
only served as a catalyst. Exhilarated and inspired by all those fascinating models that came forth
from my own dexterity, I eventually decided to pursue a career in Mechanical engineering. I made it
a point to learn something outside the curriculum regarding the working of a part in an automobile
engine, jet engine and others. It is this eagerness that propels me to choose M.S in Automotive
Engineering. The elucidated inputs, received from various sources, about Esslingen University has
aided me in pursuing my aspirations to ... Show more content on Helpwriting.net ...
Continuous knowledge gain of scientific theories, inventions, discoveries, machineries and the
physics around me laid a path which helped me to take a direction in choosing Mechanical
Engineering.
Currently, I am pursuing my Graduation in Malla Reddy Engineering College (affiliated to
Jawarharlal Nehru Technological University, Hyderabad) with Mechanical Engineering as my
discipline. The curriculum includes major courses like Automobile Engineering, Thermal
Engineering, Heat Transfer, Design of Machine Members, among the many core subjects. My
aggregate up to 6th semester is 83%.
The title of my main project is Measurement of cutting forces using grinding tool dynamometer. My
project is yet to be finished. We started calculations of cutting forces generated in work pieces using
grinding tool dynamometer. From my main project, I learnt how the cutting forces generated in
metal cutting have a direct influence on heat generation, tool wear or failure, quality of machined
surface and accuracy of the work piece. By using this dynamometer, we measured the static and
dynamic cutting forces by using strain gauge and piezo–electric accelerometer. As a team leader of
my project, I am responsible for the complete knowledge transfer within the team

sequential gearboxes Essay
Running Head: SEQUENTIAL GEARBOXES
Abstract
This paper will discuss the technology of sequential gearboxes. Relatively new technology, the
sequential gearbox has been applied mostly in ATV's, motorcycles, and the automobile racing
industry. Recently this technology has begun to reach passenger cars. There are three main points of
discussion; the workings of a manual transmission, how a sequential gearbox works and the
advantages of them, and the applications of it today. The sequential gearbox is extremely
revolutionary and is only used in high–end passenger cars, but maybe one day it will be a luxury the
majority of the population will be able to experience.
... Show more content on Helpwriting.net ...
How Sequential Gearboxes Work
In a regular manual transmission there are three forks controlled by three rods that are engaged by
the shift lever by the driver. The normal "H" pattern that the driver sees on top of the shifter enables
him or her to move the shift lever between the control rods for the three forks and thus moving the
rods back and forth. When all of these aspects are combined a successful shift is accomplished.
Transmissions on ATV's or motorcycles using sequential gearboxes have a set of gear selection forks
that move collars, which engage the gears just like on regular manual transmissions. The gearshift
lever is moved up and down by the foot and the transmission is moved from gear to gear. When the
gearshift lever is moved by the foot, a ratcheting drum is rotated. This ratcheting drum has grooves
cut into the side of it. The grooves on the ratcheting drum will direct the control rods when the drum
is away from the transmission's gears. Moving the gear selector fork is the most common use of the
grooves. With this in mind, whenever the lever is moved up or down, the drum is rotated one
increment. The rotation of the drum allows for movement of the rods or forks as set by the grooves
in the drum and the gears are then changed (Brain, n.d.). The gear shifting sequence can only be
done in order; this means that no gears can be

Mexico Is The Second Largest Economy Of Latin America Essay
According to the World Bank (2016), "Mexico is the second largest economy in Latin America"
(Iliff, 2016). Mexico is one of the largest auto producers and exporters. "Mexico, produced 3.4
million vehicles in 2015, raking seventh largest vehicle producer in the world and first in Latin
America" (Administration, I. T. (2016). Automotive manufacturing is growing, and large automotive
companies such as Nissan, Mazda, Volkswagen, and GM, who have plants already established in
Mexico, are now planning to expand their facilities. Half of the cars sold in Mexico are made there,
and the other half is imported (Iliff, 2016). The business cultural environment in Mexico consists of
families driving small old 1990's pick–up trucks. In Mexico, owning a pick–up means a lot, because
this type of cars are used for family, affordability, durability, efficiency, and convenience. Some
include Nissan King Cab, Ford F–150, and Chevy Cheyenne and Silverado. As of 2015, Mexico has
broken a new record of new vehicle sales of 1.38 million units, a 19% gain since 2014 and
decreased used vehicles sales import of 180,000 from 1.6 million. "The future consumption is
expected to increase by 500,000 units and could reach up 2 millions units" (Iliff, 2016). Mexico had
freely imported used vehicles from the United States, and due to that, there was a large demand for
used cars. The industry officials argue, "A crush of used cars hurts new cars. If a customer can not
get a decent price at trade–in, deals fall

Japanese Car Culture: The World Of Japanese Car Culture
Japanese Car Culture Japanese car culture is very popular among the world of automotive
enthusiast, it is the way people dress and modify their cars with certain concepts and themes which
was born and first found in Japan. Japanese Domestic Market or JDM is a global language of saying
Japanese car culture, it is famous since the birth of many legendary automotive brands. Japanese
cars are well known around the automotive world for their performance and well balanced all–
around vehicle specifications, completing the essences of being an impressive car which can cover
up all of the important vehicle elements such as fuel consumption, power to weight ratio, safety
precautions, which determines the quality of each cars. Of course people would have to choose
between variety of brands and the best among the others, these are some examples of popular
Japanese automotive brands; Toyota, Honda, Subaru, and Nissan. ... Show more content on
Helpwriting.net ...
The main theme of JDM is bagged or stance cars, stance cars are usually "lowered" or "chambered",
meaning the car position and wheel position are not authentic or it is modified. A "lowered" car is a
car that has lower suspension or in other words, the car body is closer to the ground. The big
question is, "what is so special about having a JDM car?". Basically it all depends on one's
prospective, because each and every individual have different point of views about the Japanese
modified cars. Seeing the world from the view of car enthusiasts, treating their beauties as if they
were a life form. "It's not about what you drive, it's about what drives you" – Keiichi Tsuchiya, a
famous Japanese drifter and street racer. People understood that what his words contains an
important value, that one's individual spirit and enthusiasm is what matters when building or
modifying a car, not only spending dozens of cash for costs, but also putting their hearts and minds
into the

Collision Avoidance System Essay
Every year millions of people get in vehicular accidents that cause expensive repairs and sometimes
trauma for the drivers. While collision avoidance systems are very advanced and well developed,
most systems are too expensive for the average consumer. Our team's general mission is to reduce
the likelihood of car crashes by improving an aspect in the car that either keeps the driver more
engaged while driving or assisting the driver in various tasks such as stopping and lane changes.
Along with the general mission, our team has defined further parameters of our product in an
attempt to narrow our ideas down. We decided the product should be modular, third party, and
affordable for the common driver. We also wanted our product to be ... Show more content on
Helpwriting.net ...
Cars with built–in systems are not without their faults. Other than their limited availability and high
cost, it is also rare to find a car that has all the features of collision avoidance systems available.
Often times car manufacturers will only offer the warning systems without the features that can
actually control a car independent of a driver. Also these systems do not guarantee that the vehicle
will not get into a crash even when the car can control its speed and tire position. Another problem is
that the system is directly integrated into the pieces of the car such as the bumper, mirrors, etc.
which makes repairs extremely expensive. When looking at potential demographics for our product,
we found a phone survey conducted Insurance Institute for Highway Safety, we found that 83% of
parents would not be willing to buy their child a brand new car. With that many parents buying used
cars, a lot of those teens will not have the luxurious access to built–in car safety. To visualize how
large the difference is, here is a simple pie chart on the topic: Another factor that led us to focus on
teen drivers was a study in 2014, also conducted by the Insurance Institute for Highway Safety, that
stated that 48% of teenagers who died in a driving accident died in a car that was at least 11 years
old. Seeing this statistic made us realize that we wanted to develop a product that could be attached
to cars that are not only 11 years

Automotive Technician Needing Computer Based Training
Like nearly every other professional today, automotive technicians need to be comfortable with
computer–based equipment. Cars are more computerized than ever before. It takes more than just
mechanical know–how and the turning of a wrench to become a certified automotive technician.
Experienced technicians can work anywhere in the country along with the right mindset and
attitude. Irrefutably the more educated you are, the better your opportunities are to find employment.
You will also learn that most of what you need to know will be from doing hands on work, like
working in the shop, or watching others do it hands on. As with everything, it starts with a high
school diploma. If you do not have at least a ... Show more content on Helpwriting.net ...
As with any other job, this one changes with time and technology. Some people can get jobs 2 days
after receiving their diploma; some take longer to find one. If you cannot find a job, try going back
to the college you attended to see if they have any leads, some people have also said that they do not
help but it definitely does not hurt to try. (Satterfield) This field takes a special person. Every driver
has been through it at least one time in their life; the engine that will not crank start, the check
engine light that keeps flashing at you every time you start your car, there is the dead battery, brakes
that just don't apply or they make a high pitched squeal. These are unavoidable moments for anyone
that owns a machine that house and engine. Technicians deal with these instants every day, and this
is what makes them extraordinary. Although technicians do not go to school for their English or
their ability to speak and interact with customers, they need to be very good at both. Everyday
technicians will speak with customers, so the techs need to come across as professional and smart.
Techs also need to know how to comfort the customers to make them feel like they and their vehicle
are in good hands. (Automotive Service Technicians and Mechanics) Technicians also need to have
faith in their tools and know that they will perform at their full potential. If one is not, then the
technician needs to figure out

Modern Vehicle and Suspension System
Introduction
A suspension system is required to operate efficiently in various operating conditions, such as high
speed cornering, accelerating and braking. A Suspension system is used to absorb the vibrations
caused by the road roughness. It is designed to improve the comfort in a vehicle, and also handling
performance. The main design features of a suspension system are the optimization of the friction
between the contact patch of the tyre and the road surface, and to deliver vehicle stability. The
system has to permit the distribution of forces generated by the wheels in contact with the ground. A
suspension system has to comply with the specifications of the design in every load condition.
A suspension system has a great importance in vehicle behaviour. Stability, handling or road holding
characteristics and also comfort, are influenced by the design of the suspension system. Generally,
there are two main types of suspension systems: Independent (McPherson, Double Wishbone,
Multilink, etc.) and Dependent suspension type (Hotchkiss, trailing arm–rigid axle) (the automotive
chassis). The motion of the wheels in a dependent type suspension, as the name suggest, is
dependent on the motion of the partner wheel. As an example, the effect of an impact is transmitted
to the other wheel, having a negative effect on the ride and handling of the vehicle. The wheel
motion in an independent suspension is not influencing the partner wheel. Any disturbances in the
wheel are not

A Report On Daimler Ag
Daimler AG is one of the top luxury car makers in the world and one of the best in the luxury cross
over segments. Some of the following technical resources give Daimler AG a competitive edge in
the market –
Technical Recourses
1. Innovations
a. The Intelligent Drive: Mercedes won the award for technology of the year for its "Intelligent
Drive" system which improves safety helps drivers evade crash. The Intelligent Drive system has
two features, Cross Traffic Assist and Lane Keeping Assist. These features use radar arrays, camera,
physical signals, and sensors that assist the drivers in avoiding accidents and reducing the impact of
the ones that cannot be avoided. http://autos.aol.com/article/technology–of–the–year–mercedes–
benz–intelligent–drive/ b. The AIRMATIC air suspension system: This technology enables the car to
adapt to the drive conditions. This system lifts the car by the approximately 4cms which in sports
mode on bad roads. Once the car touches 100km/hr the AIRMATIC suspensions system lowers the
height of car to lower the aerodynamics. https://www.mercedes–benz.com/en/mercedes–
benz/innovation/the–airmatic–air–suspension–system/ c. ConnectMe: A Mercedes car owner can
always be connected to their car with this service. Connect Me provides the car owners to remotely
connectivity to their car and the service includes, "Maintenance Management, Telediagnostics,
Breakdown Management, Accident Recovery and the Mercedes–Benz emergency call".

The Job Title Of Automotive Technician
Edy Franco Mrs. Jones English 11 7 April 2015 Most people just love how a certain vehicle looks,
but, most don 't know why the vehicle costs what it does or what goes on under the hood. Many
know the answer to that question, especially those with the job title of automotive technician. With a
workforce projection of over 700,000 jobs available in 2012 this is a growing trade. This trade will
never go down due to the fact that people will always need their cars fixed as long as cars exist.
There are two types of automotive technicians, there is the specialty technicians repair only one
system or component on a vehicle, such as brakes, suspension, or radiator. Then there are the service
technicians who inspect, maintain, and repair ... Show more content on Helpwriting.net ...
There has also been another option for work and it is to in the military, yes the military also requires
automotive technicians. People who are employed in this trade are mostly special people who strive
for what they want. These people know what they want and know how to get it. They are expected
to know how machinery work and how to fix it if anything goes wrong. You may ask what you do
on a daily basis in this career. Well shop owners expect their technicians to perform all tasks they are
given which summed up is to service a vehicle and make sure it runs safely. The technicians that
work in the military are usually the ones in charge of keeping tanks, quads and Humvees running at
their best. More often than not, your work environment should be immaculate. Usually this would
be because shops/dealerships don 't want to deal with health code violations. Normal work hour as
ann automotive technician are usually 5–7 days a week from 8 am to 5–6 pm. Now payroll can
differ based how much or what a technician is capable of doing. An average pay per hour for a
starting technician with a bit of knowledge is around $15 an hour. Salary will also depend on the
industry growth. This at the moment is really good. The minimum requirement to become a service
technician is a high school diploma or equivalent. Although this is the minimum employers
nowadays are looking for people with experience or that they have attended a post secondary
institute and complete a formal training

Dream Toolbox Research Paper
Dream tools
As a professional automotive technician, he or she relies mostly on the knowledge he or she has
acquired throughout the years of training and experience. But without tools, a technician is pretty
much useless when it comes to repairing the vehicle. That is why I have comprised a list of tools
that would be in my "Dream toolbox". The tools that I have chosen consist of diagnostic aids,
driveline repair tools, and air impact wrench that can be used for a number of uses consisting of;
light engine work, steering and suspension work, and electrical systems work. The tools I have listed
will benefit me as a technician by helping me diagnose and test vehicle quicker, allowing me to fix
more vehicles in a shorter amount of time.
The first tool I would place in my dream toolbox would be the Snap–on MODIS Ultra Modular
Diagnostic and Information System (MODIS). The MODIS Ultra is a diagnostic scan tool that
allows for technician–to–vehicle connection. The use of the scan tool can vary from reading simple
"check engine" diagnostic ... Show more content on Helpwriting.net ...
Ranging from 29mm to 36mm, the socket set is mostly used to remove axle nuts in vehicles. Used
more in the steering and suspension, driveline and powertrain systems, these sockets come in handy
when technicians have to remove axles or wheel hubs. The large nut that holds an axle together is
well oversized for any conventional socket set, and since the use of an impact wrench will be used
to remove the nut, it is recommended to use the proper impact socket so that the regular chrome
socket does not break or shatter, causing a potentially harmful accident. Manufacture by Snap–on
tools, the socket set costs $243 and is well used in the industry as many steering and suspension
components do tend to wear more. And when needed, the socket set can come in handy. And with
their lifetime warranty, it is free to replace if

Design, Development And Analysis Of Composite Mono Leaf...
Design, Development and Analysis of Composite Mono Leaf Spring: A Review
Introduction:(12Bold)
Materials:
Method:
Introduction: In order to conserve natural resources and economize energy, weight reduction has
been the main focus of automobile manufacturers. Weight reduction can be achieved primarily by
the introduction of better material, design optimization and better manufacturing processes. The
achievement of weight reduction with adequate improvement of mechanical properties has made
composite a very good replacement material for conventional steel. A composite is composed of a
high performance fibers such as carbon, Kevlar, graphite or glass in a matrix material that when
combined provides better properties compared with the individual materials by themselves. The
composite materials are used in structural application areas, such as in aircraft, space, automotive,
for sporting goods, and marine engineering. The various type of glass fibers available are Carbon
fiber, C–glass, S–glass and E–glass. However, carbon epoxy material is better than other fibers but
because of its high cost, it has limited applications. Favorable relation between cost and properties
of a material can be obtained with E–glass fiber/epoxy. The major step of composite in automotive
business is extension of use in to truly structural application such as primary body structure and to
chassis and suspension system. These are the area which has to sustain all major road load

Automobile Mechanic
Automobile Mechanic
Over time cars may break down or get worn out. For an example, engines can give out, break, or fall
apart. In addition, tires need to be changed every once in awhile when they wear out; oil needs to be
changed or else it will destroy the engine. If people did not have mechanics how would they get
around when their vehicles break down? To become an automobile mechanic, it is crucial to prepare
through the appropriate schooling and training, to understand what the job itself entails, and to know
the potential outlook for the job.
The correct career preparation for this job is undergoing basic training. To be a mechanic very little
education is needed. A high school diploma is required, but any other advanced education ... Show
Do to the fact that mechanics have to get down and dirty. But if it were not for mechanics many of
our cars would not be on the road at this moment. People usually underestimate a mechanic's job,
but it takes many years to perfect this occupation do to the fact that it is hands on and that your
reliable for another human beings life. In conclusion since very few people are willing to get down
in dirty, this job is becoming higher in demand. "The U.S. Bureau of Labor Statistics predicts that
the number of jobs for auto mechanics will increase by 17 percent through 2020, compared to 14
percent for all occupations" (Farnen). Furthermore, as cars become more complex people are not
going to be able to fix their own vehicle, so they will have to take it to a

Dangers Of Texting And Driving

Recommended

Recommended

More Related Content

More from Michelle Madero

More from Michelle Madero (20)

Recently uploaded

Recently uploaded (20)

Dangers Of Texting And Driving