3. MEES21K075
PEFY-M-VMA(L)-A
2
1. SPECIFICATIONS Ceiling concealed (Medium static pressure type)
I.Ceiling concealed (Medium static pressure type)
1. SPECIFICATIONS
Model PEFY-M20VMA-A PEFY-M25VMA-A PEFY-M32VMA-A PEFY-M40VMA-A
Power source 1-phase 220-230-240 V 50 Hz 1-phase 220-230-240 V 50 Hz 1-phase 220-230-240 V 50 Hz 1-phase 220-230-240 V 50 Hz
Cooling capacity *1 kW 2.2 2.8 3.6 4.5
(Nominal) *1 BTU/h 7,500 9,600 12,300 15,400
*2 Power input kW 0.032 0.032 0.044 0.047
*2 Current input A 0.26-0.25-0.24 0.26-0.25-0.24 0.36-0.34-0.33 0.39-0.37-0.36
Heating capacity *3 kW 2.5 3.2 4.0 5.0
(Nominal) *3 BTU/h 8,500 10,900 13,600 17,100
*2 Power input kW 0.030 0.030 0.042 0.045
*2 Current input A 0.26-0.25-0.24 0.26-0.25-0.24 0.36-0.34-0.33 0.39-0.37-0.36
External finish Galvanized steel plate Galvanized steel plate Galvanized steel plate Galvanized steel plate
External dimension H x W x D mm 250 x 700 x 732 250 x 700 x 732 250 x 700 x 732 250 x 900 x 732
in. 9-7/8 x 27-9/16 x 28-7/8 9-7/8 x 27-9/16 x 28-7/8 9-7/8 x 27-9/16 x 28-7/8 9-7/8 x 35-7/16 x 28-7/8
Net weight kg (lbs) 21 (47) 21 (47) 21 (47) 25 (56)
Heat exchanger
Cross fin (Aluminum fin and
copper tube)
Cross fin (Aluminum fin and
copper tube)
Cross fin (Aluminum fin and
copper tube)
Cross fin (Aluminum fin and
copper tube)
FAN Type x Quantity Sirocco fan x 1 Sirocco fan x 1 Sirocco fan x 1 Sirocco fan x 2
*4
External static press.
Pa
35 - <50> - <70> - <100> -
<150>
35 - <50> - <70> - <100> -
<150>
35 - <50> - <70> - <100> -
<150>
35 - <50> - <70> - <100> -
<150>
mmH2O
3.6 - <5.1> - <7.1> - <10.2> -
<15.3>
3.6 - <5.1> - <7.1> - <10.2> -
<15.3>
3.6 - <5.1> - <7.1> - <10.2> -
<15.3>
3.6 - <5.1> - <7.1> - <10.2> -
<15.3>
Motor Type DC motor DC motor DC motor DC motor
Motor output kW 0.085 0.085 0.085 0.121
Driving mechanism Direct-driven by motor Direct-driven by motor Direct-driven by motor Direct-driven by motor
Air flow rate (Low-Mid-High) (Low-Mid-High) (Low-Mid-High) (Low-Mid-High)
m3
/min 6.0 - 7.5 - 8.5 6.0 - 7.5 - 8.5 7.5 - 9.0 - 10.5 10.0 - 12.0 - 14.0
L/s 100 - 125 - 142 100 - 125 - 142 125 - 150 - 175 167 - 200 - 233
cfm 212 - 265 - 300 212 - 265 - 300 265 - 318 - 371 353 - 424 - 494
Sound pressure level (measured in anechoic room) (Low-Mid-High) (Low-Mid-High) (Low-Mid-High) (Low-Mid-High)
*2, 5
dB <A>
21.0-25.0-27.0 21.0-25.0-27.0 23.0-27.0-30.0 23.0-28.0-31.0
*2, 6 18.0-22.0-24.0 18.0-22.0-24.0 20.0-24.0-27.0 20.0-25.0-28.0
Insulation material
EPS, Polystyrene foam, Ure-
thane foam
EPS, Polystyrene foam, Ure-
thane foam
EPS, Polystyrene foam, Ure-
thane foam
EPS, Polystyrene foam, Ure-
thane foam
Air filter PP honeycomb fabric. PP honeycomb fabric. PP honeycomb fabric. PP honeycomb fabric.
Protection device Fuse Fuse Fuse Fuse
Refrigerant control device LEV LEV LEV LEV
Connectable outdoor unit R32, R410A CITY MULTI R32,R410A CITY MULTI R32, R410A CITY MULTI R32, R410A CITY MULTI
Refrigerant piping Liquid mm (in.) 6.35 (1/4)Brazed 6.35 (1/4)Brazed 6.35 (1/4)Brazed 6.35 (1/4)Brazed
diameter Gas mm (in.) 12.7 (1/2)Brazed 12.7 (1/2)Brazed 12.7 (1/2)Brazed 12.7 (1/2)Brazed
Field drain pipe size mm (in.) O.D.32 (1-1/4") O.D.32 (1-1/4") O.D.32 (1-1/4") O.D.32 (1-1/4")
Drawing External KB94C15Y KB94C15Y KB94C15Y KB94C15Y
Wiring KB94C15X KB94C15X KB94C15X KB94C15X
Refrigerant cycle - - - -
Standard attachment Document
Installation Manual, Instruction
Book
Installation Manual, Instruction
Book
Installation Manual, Instruction
Book
Installation Manual, Instruction
Book
Accessory Washer, Drain hose, Tie band Washer, Drain hose, Tie band Washer, Drain hose, Tie band Washer, Drain hose, Tie band
Optional parts Filter box PAC-KE91TB-E PAC-KE91TB-E PAC-KE91TB-E PAC-KE92TB-E
Plasma Quad Connect MAC-100FT-E MAC-100FT-E MAC-100FT-E MAC-100FT-E
PQ attachment (Rear inlet) PAC-HA31PAR PAC-HA31PAR PAC-HA31PAR PAC-HA31PAR
PQ attachment (Bottom inlet) PAC-HA31PAU PAC-HA31PAU PAC-HA31PAU PAC-HA31PAU
PQ box PAC-KE91PTB-E PAC-KE91PTB-E PAC-KE91PTB-E PAC-KE92PTB-E
Remarks * Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be referred
to the Installation Manual.
* Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter
1.Nominal cooling conditions
Indoor:27°CDB/19°CWB (81°FDB/66°FWB), Outdoor:35°CDB (95°FDB)
Pipe length:7.5m (24-9/16ft.), Level difference:0m (0ft.)
2.The values are measured at the factory setting of external static pressure.
3.Nominal heating conditions
Indoor:20°CDB (68°FDB), Outdoor:7°CDB/6°CWB (45°FDB/43°FWB)
Pipe length:7.5m (24-9/16ft.), Level difference:0m (0ft.)
4.The factory setting of airflow mode and external static pressure mode is shown without < >.
Refer to "Fan characteristics curves", according to the external static pressure, in DATA BOOK for the usable range of air flow rate.
5.Measured in anechoic room with a 1 m air inlet duct and 2 m air outlet duct attached to the unit and 1.5 m below
the unit.
6.Measured in anechoic room with a 2 m air inlet duct and 2 m air outlet duct attached to the unit and 1.5 m below
the unit.
* The sound pressure level measured by the conventional method in JIS.
* R32 is flammable, and certain restrictions apply to the installation of units.
For detail, refer to the section in the Databook on installation restrictions.
BTU/h =kW x 3,412
cfm =m3
/min x 35.31
lbs =kg/0.4536
*Above specification data is
subject to rounding variation.
0000006347.BOOK 2 ページ 2021年7月13日 火曜日 午前9時52分
4. MEES21K075
PEFY-M-VMA(L)-A
3
1. SPECIFICATIONS Ceiling concealed (Medium static pressure type)
Model PEFY-M50VMA-A PEFY-M63VMA-A PEFY-M71VMA-A PEFY-M80VMA-A
Power source 1-phase 220-230-240 V 50 Hz 1-phase 220-230-240 V 50 Hz 1-phase 220-230-240 V 50 Hz 1-phase 220-230-240 V 50 Hz
Cooling capacity *1 kW 5.6 7.1 8.0 9.0
(Nominal) *1 BTU/h 19,100 24,200 27,300 30,700
*2 Power input kW 0.066 0.087 0.080 0.080
*2 Current input A 0.53-0.51-0.49 0.69-0.66-0.63 0.60-0.57-0.55 0.60-0.57-0.55
Heating capacity *3 kW 6.3 8.0 9.0 10.0
(Nominal) *3 BTU/h 21,500 27,300 30,700 34,100
*2 Power input kW 0.064 0.085 0.078 0.078
*2 Current input A 0.53-0.51-0.49 0.69-0.66-0.63 0.60-0.57-0.55 0.60-0.57-0.55
External finish Galvanized steel plate Galvanized steel plate Galvanized steel plate Galvanized steel plate
External dimension H x W x D mm 250 x 900 x 732 250 x 900 x 732 250 x 1,100 x 732 250 x 1,100 x 732
in. 9-7/8 x 35-7/16 x 28-7/8 9-7/8 x 35-7/16 x 28-7/8 9-7/8 x 43-5/16 x 28-7/8 9-7/8 x 43-5/16 x 28-7/8
Net weight kg (lbs) 25 (56) 27 (60) 30 (67) 30 (67)
Heat exchanger
Cross fin (Aluminum fin and
copper tube)
Cross fin (Aluminum fin and
copper tube)
Cross fin (Aluminum fin and
copper tube)
Cross fin (Aluminum fin and
copper tube)
FAN Type x Quantity Sirocco fan x 2 Sirocco fan x 2 Sirocco fan x 2 Sirocco fan x 2
*4
External static press.
Pa
35 - <50> - <70> - <100> -
<150>
35 - <50> - <70> - <100> -
<150>
40 - <50> - <70> - <100> -
<150>
40 - <50> - <70> - <100> -
<150>
mmH2O
3.6 - <5.1> - <7.1> - <10.2> -
<15.3>
3.6 - <5.1> - <7.1> - <10.2> -
<15.3>
4.1 - <5.1> - <7.1> - <10.2> -
<15.3>
4.1 - <5.1> - <7.1> - <10.2> -
<15.3>
Motor Type DC motor DC motor DC motor DC motor
Motor output kW 0.121 0.121 0.121 0.121
Driving mechanism Direct-driven by motor Direct-driven by motor Direct-driven by motor Direct-driven by motor
Air flow rate (Low-Mid-High) (Low-Mid-High) (Low-Mid-High) (Low-Mid-High)
m3/min 12.0 - 14.5 - 17.0 13.5 - 16.0 - 19.0 14.5 - 18.0 - 21.0 14.5 - 18.0 - 21.0
L/s 200 - 242 - 283 225 - 267 - 317 242 - 300 - 350 242 - 300 - 350
cfm 424 - 512 - 600 477 - 565 - 671 512 - 636 - 742 512 - 636 - 742
Sound pressure level (measured in anechoic room) (Low-Mid-High) (Low-Mid-High) (Low-Mid-High) (Low-Mid-High)
*2, 5
dB <A>
24.0-31.0-34.0 27.0-31.0-35.0 25.0-31.0-34.0 25.0-31.0-34.0
*2, 6 21.0-28.0-31.0 24.0-28.0-32.0 22.0-28.0-31.0 22.0-28.0-31.0
Insulation material
EPS, Polystyrene foam, Ure-
thane foam
EPS, Polystyrene foam, Ure-
thane foam
EPS, Polystyrene foam, Ure-
thane foam
EPS, Polystyrene foam, Ure-
thane foam
Air filter PP honeycomb fabric. PP honeycomb fabric. PP honeycomb fabric. PP honeycomb fabric.
Protection device Fuse Fuse Fuse Fuse
Refrigerant control device LEV LEV LEV LEV
Connectable outdoor unit R32, R410A CITY MULTI R32, R410A CITY MULTI R32, R410A CITY MULTI R32, R410A CITY MULTI
Refrigerant piping Liquid mm (in.) 6.35 (1/4)Brazed 9.52 (3/8)Brazed 9.52 (3/8)Brazed 9.52 (3/8)Brazed
diameter Gas mm (in.) 12.7 (1/2)Brazed 15.88 (5/8)Brazed 15.88 (5/8)Brazed 15.88 (5/8)Brazed
Field drain pipe size mm (in.) O.D.32 (1-1/4") O.D.32 (1-1/4") O.D.32 (1-1/4") O.D.32 (1-1/4")
Drawing External KB94C15Y KB94C15Y KB94C15Y KB94C15Y
Wiring KB94C15X KB94C15X KB94C15X KB94C15X
Refrigerant cycle - - - -
Standard attachment Document
Installation Manual, Instruction
Book
Installation Manual, Instruction
Book
Installation Manual, Instruction
Book
Installation Manual, Instruction
Book
Accessory Washer, Drain hose, Tie band Washer, Drain hose, Tie band Washer, Drain hose, Tie band Washer, Drain hose, Tie band
Optional parts Filter box PAC-KE92TB-E PAC-KE92TB-E PAC-KE93TB-E PAC-KE93TB-E
Plasma Quad Connect MAC-100FT-E MAC-100FT-E MAC-100FT-E MAC-100FT-E
PQ attachment (Rear inlet) PAC-HA31PAR PAC-HA31PAR PAC-HA31PAR PAC-HA31PAR
PQ attachment (Bottom inlet) PAC-HA31PAU PAC-HA31PAU PAC-HA31PAU PAC-HA31PAU
PQ box PAC-KE92PTB-E PAC-KE92PTB-E PAC-KE93PTB-E PAC-KE93PTB-E
Remarks * Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be referred
to the Installation Manual.
* Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter
1.Nominal cooling conditions
Indoor:27°CDB/19°CWB (81°FDB/66°FWB), Outdoor:35°CDB (95°FDB)
Pipe length:7.5m (24-9/16ft.), Level difference:0m (0ft.)
2.The values are measured at the factory setting of external static pressure.
3.Nominal heating conditions
Indoor:20°CDB (68°FDB), Outdoor:7°CDB/6°CWB (45°FDB/43°FWB)
Pipe length:7.5m (24-9/16ft.), Level difference:0m (0ft.)
4.The factory setting of airflow mode and external static pressure mode is shown without < >.
Refer to "Fan characteristics curves", according to the external static pressure, in DATA BOOK for the usable range of air flow rate.
5.Measured in anechoic room with a 1 m air inlet duct and 2 m air outlet duct attached to the unit and 1.5 m below
the unit.
6.Measured in anechoic room with a 2 m air inlet duct and 2 m air outlet duct attached to the unit and 1.5 m below
the unit.
* The sound pressure level measured by the conventional method in JIS.
* R32 is flammable, and certain restrictions apply to the installation of units.
For detail, refer to the section in the Databook on installation restrictions.
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg/0.4536
*Above specification data is
subject to rounding variation.
0000006347.BOOK 3 ページ 2021年7月13日 火曜日 午前9時52分
5. MEES21K075
PEFY-M-VMA(L)-A
4
1. SPECIFICATIONS Ceiling concealed (Medium static pressure type)
Model PEFY-M100VMA-A PEFY-M125VMA-A PEFY-M140VMA-A
Power source 1-phase 220-230-240 V 50 Hz 1-phase 220-230-240 V 50 Hz 1-phase 220-230-240 V 50 Hz
Cooling capacity *1 kW 11.2 14.0 16.0
(Nominal) *1 BTU/h 38,200 47,800 54,600
*2 Power input kW 0.142 0.199 0.208
*2 Current input A 1.01-0.97-0.93 1.29-1.23-1.18 1.40-1.34-1.28
Heating capacity *3 kW 12.5 16.0 18.0
(Nominal) *3 BTU/h 42,700 54,600 61,400
*2 Power input kW 0.140 0.197 0.206
*2 Current input A 1.01-0.97-0.93 1.29-1.23-1.18 1.40-1.34-1.28
External finish Galvanized steel plate Galvanized steel plate Galvanized steel plate
External dimension H x W x D mm 250 x 1,400 x 732 250 x 1,400 x 732 250 x 1,600 x 732
in. 9-7/8 x 55-1/8 x 28-7/8 9-7/8 x 55-1/8 x 28-7/8 9-7/8 x 63 x 28-7/8
Net weight kg (lbs) 37 (82) 38 (84) 42 (93)
Heat exchanger
Cross fin (Aluminum fin and
copper tube)
Cross fin (Aluminum fin and
copper tube)
Cross fin (Aluminum fin and
copper tube)
FAN Type x Quantity Sirocco fan x 3 Sirocco fan x 3 Sirocco fan x 3
*4
External static press.
Pa
40 - <50> - <70> - <100> -
<150>
<40> - 50 - <70> - <100> -
<150>
<40> - 50 - <70> - <100> -
<150>
mmH2O
4.1 - <5.1> - <7.1> - <10.2> -
<15.3>
<4.1> - 5.1 - <7.1> - <10.2> -
<15.3>
<4.1> - 5.1 - <7.1> - <10.2> -
<15.3>
Motor Type DC motor DC motor DC motor
Motor output kW 0.300 0.300 0.300
Driving mechanism Direct-driven by motor Direct-driven by motor Direct-driven by motor
Air flow rate (Low-Mid-High) (Low-Mid-High) (Low-Mid-High)
m3/min 23.0 - 28.0 - 32.0 28.0 - 34.0 - 37.0 29.5 - 35.5 - 40.0
L/s 383 - 467 - 533 467 - 567 - 617 492 - 592 - 667
cfm 812 - 989 - 1,130 989 - 1,201 - 1,306 1,042 - 1,254 - 1,412
Sound pressure level (measured in anechoic room) (Low-Mid-High) (Low-Mid-High) (Low-Mid-High)
*2, 5
dB <A>
30.0-35.0-38.0 34.0-38.0-40.0 33.0-37.0-40.0
*2, 6 27.0-32.0-35.0 31.0-35.0-37.0 30.0-34.0-37.0
Insulation material
EPS, Polystyrene foam, Ure-
thane foam
EPS, Polystyrene foam, Ure-
thane foam
EPS, Polystyrene foam, Ure-
thane foam
Air filter PP honeycomb fabric. PP honeycomb fabric. PP honeycomb fabric.
Protection device Fuse Fuse Fuse
Refrigerant control device LEV LEV LEV
Connectable outdoor unit R32, R410A CITY MULTI R32, R410A CITY MULTI R32, R410A CITY MULTI
Refrigerant piping Liquid mm (in.) 9.52 (3/8)Brazed 9.52 (3/8)Brazed 9.52 (3/8)Brazed
diameter Gas mm (in.) 15.88 (5/8)Brazed 15.88 (5/8)Brazed 15.88 (5/8)Brazed
Field drain pipe size mm (in.) O.D.32 (1-1/4") O.D.32 (1-1/4") O.D.32 (1-1/4")
Drawing External KB94C15Y KB94C15Y KB94C15Y
Wiring KB94C15X KB94C15X KB94C15X
Refrigerant cycle - - -
Standard attachment Document
Installation Manual, Instruction
Book
Installation Manual, Instruction
Book
Installation Manual, Instruction
Book
Accessory Washer, Drain hose, Tie band Washer, Drain hose, Tie band Washer, Drain hose, Tie band
Optional parts Filter box PAC-KE94TB-E PAC-KE94TB-E PAC-KE95TB-E
Plasma Quad Connect MAC-100FT-E MAC-100FT-E MAC-100FT-E
PQ attachment (Rear inlet) PAC-HA31PAR PAC-HA31PAR PAC-HA31PAR
PQ attachment (Bottom inlet) PAC-HA31PAU PAC-HA31PAU PAC-HA31PAU
PQ box PAC-KE94PTB-E PAC-KE94PTB-E PAC-KE95PTB-E
Remarks * Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be referred
to the Installation Manual.
* Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter
1.Nominal cooling conditions
Indoor:27°CDB/19°CWB (81°FDB/66°FWB), Outdoor:35°CDB (95°FDB)
Pipe length:7.5m (24-9/16ft.), Level difference:0m (0ft.)
2.The values are measured at the factory setting of external static pressure.
3.Nominal heating conditions
Indoor:20°CDB (68°FDB), Outdoor:7°CDB/6°CWB (45°FDB/43°FWB)
Pipe length:7.5m (24-9/16ft.), Level difference:0m (0ft.)
4.The factory setting of airflow mode and external static pressure mode is shown without < >.
Refer to "Fan characteristics curves", according to the external static pressure, in DATA BOOK for the usable range of air flow rate.
5.Measured in anechoic room with a 1 m air inlet duct and 2 m air outlet duct attached to the unit and 1.5 m below
the unit.
6.Measured in anechoic room with a 2 m air inlet duct and 2 m air outlet duct attached to the unit and 1.5 m below
the unit.
* The sound pressure level measured by the conventional method in JIS.
* R32 is flammable, and certain restrictions apply to the installation of units.
For detail, refer to the section in the Databook on installation restrictions.
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg/0.4536
*Above specification data is
subject to rounding variation.
0000006347.BOOK 4 ページ 2021年7月13日 火曜日 午前9時52分
6. MEES21K075
PEFY-M-VMA(L)-A
5
1. SPECIFICATIONS Ceiling concealed (Medium static pressure type)
Model PEFY-M20VMAL-A PEFY-M25VMAL-A PEFY-M32VMAL-A PEFY-M40VMAL-A
Power source 1-phase 220-230-240 V 50 Hz 1-phase 220-230-240 V 50 Hz 1-phase 220-230-240 V 50 Hz 1-phase 220-230-240 V 50 Hz
Cooling capacity *1 kW 2.2 2.8 3.6 4.5
(Nominal) *1 BTU/h 7,500 9,600 12,300 15,400
*2 Power input kW 0.030 0.030 0.042 0.045
*2 Current input A 0.26-0.25-0.24 0.26-0.25-0.24 0.36-0.34-0.33 0.39-0.37-0.36
Heating capacity *3 kW 2.5 3.2 4.0 5.0
(Nominal) *3 BTU/h 8,500 10,900 13,600 17,100
*2 Power input kW 0.030 0.030 0.042 0.045
*2 Current input A 0.26-0.25-0.24 0.26-0.25-0.24 0.36-0.34-0.33 0.39-0.37-0.36
External finish Galvanized steel plate Galvanized steel plate Galvanized steel plate Galvanized steel plate
External dimension H x W x D mm 250 x 700 x 732 250 x 700 x 732 250 x 700 x 732 250 x 900 x 732
in. 9-7/8 x 27-9/16 x 28-7/8 9-7/8 x 27-9/16 x 28-7/8 9-7/8 x 27-9/16 x 28-7/8 9-7/8 x 35-7/16 x 28-7/8
Net weight kg (lbs) 20 (45) 20 (45) 20 (45) 24 (53)
Heat exchanger
Cross fin (Aluminum fin and
copper tube)
Cross fin (Aluminum fin and
copper tube)
Cross fin (Aluminum fin and
copper tube)
Cross fin (Aluminum fin and
copper tube)
FAN Type x Quantity Sirocco fan x 1 Sirocco fan x 1 Sirocco fan x 1 Sirocco fan x 2
*4
External static press.
Pa
35 - <50> - <70> - <100> -
<150>
35 - <50> - <70> - <100> -
<150>
35 - <50> - <70> - <100> -
<150>
35 - <50> - <70> - <100> -
<150>
mmH2O
3.6 - <5.1> - <7.1> - <10.2> -
<15.3>
3.6 - <5.1> - <7.1> - <10.2> -
<15.3>
3.6 - <5.1> - <7.1> - <10.2> -
<15.3>
3.6 - <5.1> - <7.1> - <10.2> -
<15.3>
Motor Type DC motor DC motor DC motor DC motor
Motor output kW 0.085 0.085 0.085 0.121
Driving mechanism Direct-driven by motor Direct-driven by motor Direct-driven by motor Direct-driven by motor
Air flow rate (Low-Mid-High) (Low-Mid-High) (Low-Mid-High) (Low-Mid-High)
m3/min 6.0 - 7.5 - 8.5 6.0 - 7.5 - 8.5 7.5 - 9.0 - 10.5 10.0 - 12.0 - 14.0
L/s 100 - 125 - 142 100 - 125 - 142 125 - 150 - 175 167 - 200 - 233
cfm 212 - 265 - 300 212 - 265 - 300 265 - 318 - 371 353 - 424 - 494
Sound pressure level (measured in anechoic room) (Low-Mid-High) (Low-Mid-High) (Low-Mid-High) (Low-Mid-High)
*2, 5
dB <A>
21.0-25.0-27.0 21.0-25.0-27.0 23.0-27.0-30.0 23.0-28.0-31.0
*2, 6 18.0-22.0-24.0 18.0-22.0-24.0 20.0-24.0-27.0 20.0-25.0-28.0
Insulation material
EPS, Polystyrene foam, Ure-
thane foam
EPS, Polystyrene foam, Ure-
thane foam
EPS, Polystyrene foam, Ure-
thane foam
EPS, Polystyrene foam, Ure-
thane foam
Air filter PP honeycomb fabric. PP honeycomb fabric. PP honeycomb fabric. PP honeycomb fabric.
Protection device Fuse Fuse Fuse Fuse
Refrigerant control device LEV LEV LEV LEV
Connectable outdoor unit R32, R410A CITY MULTI R32, R410A CITY MULTI R32, R410A CITY MULTI R32, R410A CITY MULTI
Refrigerant piping Liquid mm (in.) 6.35 (1/4)Brazed 6.35 (1/4)Brazed 6.35 (1/4)Brazed 6.35 (1/4)Brazed
diameter Gas mm (in.) 12.7 (1/2)Brazed 12.7 (1/2)Brazed 12.7 (1/2)Brazed 12.7 (1/2)Brazed
Field drain pipe size mm (in.) O.D.32 (1-1/4") O.D.32 (1-1/4") O.D.32 (1-1/4") O.D.32 (1-1/4")
Drawing External KB94C15Z KB94C15Z KB94C15Z KB94C15Z
Wiring KB94C15X KB94C15X KB94C15X KB94C15X
Refrigerant cycle - - - -
Standard attachment Document
Installation Manual, Instruction
Book
Installation Manual, Instruction
Book
Installation Manual, Instruction
Book
Installation Manual, Instruction
Book
Accessory Washer, Drain hose, Tie band Washer, Drain hose, Tie band Washer, Drain hose, Tie band Washer, Drain hose, Tie band
Optional parts Filter box PAC-KE91TB-E PAC-KE91TB-E PAC-KE91TB-E PAC-KE92TB-E
Plasma Quad Connect MAC-100FT-E MAC-100FT-E MAC-100FT-E MAC-100FT-E
PQ attachment (Rear inlet) PAC-HA31PAR PAC-HA31PAR PAC-HA31PAR PAC-HA31PAR
PQ attachment (Bottom inlet) PAC-HA31PAU PAC-HA31PAU PAC-HA31PAU PAC-HA31PAU
PQ box PAC-KE91PTB-E PAC-KE91PTB-E PAC-KE91PTB-E PAC-KE92PTB-E
Remarks * Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be referred
to the Installation Manual.
* Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter
1.Nominal cooling conditions
Indoor:27°CDB/19°CWB (81°FDB/66°FWB), Outdoor:35°CDB (95°FDB)
Pipe length:7.5m (24-9/16ft.), Level difference:0m (0ft.)
2.The values are measured at the factory setting of external static pressure.
3.Nominal heating conditions
Indoor:20°CDB (68°FDB), Outdoor:7°CDB/6°CWB (45°FDB/43°FWB)
Pipe length:7.5m (24-9/16ft.), Level difference:0m (0ft.)
4.The factory setting of airflow mode and external static pressure mode is shown without < >.
Refer to "Fan characteristics curves", according to the external static pressure, in DATA BOOK for the usable range of air flow rate.
5.Measured in anechoic room with a 1 m air inlet duct and 2 m air outlet duct attached to the unit and 1.5 m below
the unit.
6.Measured in anechoic room with a 2 m air inlet duct and 2 m air outlet duct attached to the unit and 1.5 m below
the unit.
* The sound pressure level measured by the conventional method in JIS.
* R32 is flammable, and certain restrictions apply to the installation of units.
For detail, refer to the section in the Databook on installation restrictions.
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg/0.4536
*Above specification data is
subject to rounding variation.
0000006347.BOOK 5 ページ 2021年7月13日 火曜日 午前9時52分
7. MEES21K075
PEFY-M-VMA(L)-A
6
1. SPECIFICATIONS Ceiling concealed (Medium static pressure type)
Model PEFY-M50VMAL-A PEFY-M63VMAL-A PEFY-M71VMAL-A PEFY-M80VMAL-A
Power source 1-phase 220-230-240 V 50 Hz 1-phase 220-230-240 V 50 Hz 1-phase 220-230-240 V 50 Hz 1-phase 220-230-240 V 50 Hz
Cooling capacity *1 kW 5.6 7.1 8.0 9.0
(Nominal) *1 BTU/h 19,100 24,200 27,300 30,700
*2 Power input kW 0.064 0.085 0.078 0.078
*2 Current input A 0.53-0.51-0.49 0.69-0.66-0.63 0.60-0.57-0.55 0.60-0.57-0.55
Heating capacity *3 kW 6.3 8.0 9.0 10.0
(Nominal) *3 BTU/h 21,500 27,300 30,700 34,100
*2 Power input kW 0.064 0.085 0.078 0.078
*2 Current input A 0.53-0.51-0.49 0.69-0.66-0.63 0.60-0.57-0.55 0.60-0.57-0.55
External finish Galvanized steel plate Galvanized steel plate Galvanized steel plate Galvanized steel plate
External dimension H x W x D mm 250 x 900 x 732 250 x 900 x 732 250 x 1,100 x 732 250 x 1,100 x 732
in. 9-7/8 x 35-7/16 x 28-7/8 9-7/8 x 35-7/16 x 28-7/8 9-7/8 x 43-5/16 x 28-7/8 9-7/8 x 43-5/16 x 28-7/8
Net weight kg (lbs) 24 (53) 26 (58) 29 (64) 29 (64)
Heat exchanger
Cross fin (Aluminum fin and
copper tube)
Cross fin (Aluminum fin and
copper tube)
Cross fin (Aluminum fin and
copper tube)
Cross fin (Aluminum fin and
copper tube)
FAN Type x Quantity Sirocco fan x 2 Sirocco fan x 2 Sirocco fan x 2 Sirocco fan x 2
*4
External static press.
Pa
35 - <50> - <70> - <100> -
<150>
35 - <50> - <70> - <100> -
<150>
40 - <50> - <70> - <100> -
<150>
40 - <50> - <70> - <100> -
<150>
mmH2O
3.6 - <5.1> - <7.1> - <10.2> -
<15.3>
3.6 - <5.1> - <7.1> - <10.2> -
<15.3>
4.1 - <5.1> - <7.1> - <10.2> -
<15.3>
4.1 - <5.1> - <7.1> - <10.2> -
<15.3>
Motor Type DC motor DC motor DC motor DC motor
Motor output kW 0.121 0.121 0.121 0.121
Driving mechanism Direct-driven by motor Direct-driven by motor Direct-driven by motor Direct-driven by motor
Air flow rate (Low-Mid-High) (Low-Mid-High) (Low-Mid-High) (Low-Mid-High)
m3/min 12.0 - 14.5 - 17.0 13.5 - 16.0 - 19.0 14.5 - 18.0 - 21.0 14.5 - 18.0 - 21.0
L/s 200 - 242 - 283 225 - 267 - 317 242 - 300 - 350 242 - 300 - 350
cfm 424 - 512 - 600 477 - 565 - 671 512 - 636 - 742 512 - 636 - 742
Sound pressure level (measured in anechoic room) (Low-Mid-High) (Low-Mid-High) (Low-Mid-High) (Low-Mid-High)
*2, 5
dB <A>
24.0-31.0-34.0 27.0-31.0-35.0 25.0-31.0-34.0 25.0-31.0-34.0
*2, 6 21.0-28.0-31.0 24.0-28.0-32.0 22.0-28.0-31.0 22.0-28.0-31.0
Insulation material
EPS, Polystyrene foam, Ure-
thane foam
EPS, Polystyrene foam, Ure-
thane foam
EPS, Polystyrene foam, Ure-
thane foam
EPS, Polystyrene foam, Ure-
thane foam
Air filter PP honeycomb fabric. PP honeycomb fabric. PP honeycomb fabric. PP honeycomb fabric.
Protection device Fuse Fuse Fuse Fuse
Refrigerant control device LEV LEV LEV LEV
Connectable outdoor unit R32, R410A CITY MULTI R32, R410A CITY MULTI R32, R410A CITY MULTI R32, R410A CITY MULTI
Refrigerant piping Liquid mm (in.) 6.35 (1/4)Brazed 9.52 (3/8)Brazed 9.52 (3/8)Brazed 9.52 (3/8)Brazed
diameter Gas mm (in.) 12.7 (1/2)Brazed 15.88 (5/8)Brazed 15.88 (5/8)Brazed 15.88 (5/8)Brazed
Field drain pipe size mm (in.) O.D.32 (1-1/4") O.D.32 (1-1/4") O.D.32 (1-1/4") O.D.32 (1-1/4")
Drawing External KB94C15Z KB94C15Z KB94C15Z KB94C15Z
Wiring KB94C15X KB94C15X KB94C15X KB94C15X
Refrigerant cycle - - - -
Standard attachment Document
Installation Manual, Instruction
Book
Installation Manual, Instruction
Book
Installation Manual, Instruction
Book
Installation Manual, Instruction
Book
Accessory Washer, Drain hose, Tie band Washer, Drain hose, Tie band Washer, Drain hose, Tie band Washer, Drain hose, Tie band
Optional parts Filter box PAC-KE92TB-E PAC-KE92TB-E PAC-KE93TB-E PAC-KE93TB-E
Plasma Quad Connect MAC-100FT-E MAC-100FT-E MAC-100FT-E MAC-100FT-E
PQ attachment (Rear inlet) PAC-HA31PAR PAC-HA31PAR PAC-HA31PAR PAC-HA31PAR
PQ attachment (Bottom inlet) PAC-HA31PAU PAC-HA31PAU PAC-HA31PAU PAC-HA31PAU
PQ box PAC-KE92PTB-E PAC-KE92PTB-E PAC-KE93PTB-E PAC-KE93PTB-E
Remarks * Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be referred
to the Installation Manual.
* Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter
1.Nominal cooling conditions
Indoor:27°CDB/19°CWB (81°FDB/66°FWB), Outdoor:35°CDB (95°FDB)
Pipe length:7.5m (24-9/16ft.), Level difference:0m (0ft.)
2.The values are measured at the factory setting of external static pressure.
3.Nominal heating conditions
Indoor:20°CDB (68°FDB), Outdoor:7°CDB/6°CWB (45°FDB/43°FWB)
Pipe length:7.5m (24-9/16ft.), Level difference:0m (0ft.)
4.The factory setting of airflow mode and external static pressure mode is shown without < >.
Refer to "Fan characteristics curves", according to the external static pressure, in DATA BOOK for the usable range of air flow rate.
5.Measured in anechoic room with a 1 m air inlet duct and 2 m air outlet duct attached to the unit and 1.5 m below
the unit.
6.Measured in anechoic room with a 2 m air inlet duct and 2 m air outlet duct attached to the unit and 1.5 m below
the unit.
* The sound pressure level measured by the conventional method in JIS.
* R32 is flammable, and certain restrictions apply to the installation of units.
For detail, refer to the section in the Databook on installation restrictions.
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg/0.4536
*Above specification data is
subject to rounding variation.
0000006347.BOOK 6 ページ 2021年7月13日 火曜日 午前9時52分
8. MEES21K075
PEFY-M-VMA(L)-A
7
1. SPECIFICATIONS Ceiling concealed (Medium static pressure type)
Model PEFY-M100VMAL-A PEFY-M125VMAL-A PEFY-M140VMAL-A
Power source 1-phase 220-230-240 V 50 Hz 1-phase 220-230-240 V 50 Hz 1-phase 220-230-240 V 50 Hz
Cooling capacity *1 kW 11.2 14.0 16.0
(Nominal) *1 BTU/h 38,200 47,800 54,600
*2 Power input kW 0.140 0.197 0.206
*2 Current input A 1.01-0.97-0.93 1.29-1.23-1.18 1.40-1.34-1.28
Heating capacity *3 kW 12.5 16.0 18.0
(Nominal) *3 BTU/h 42,700 54,600 61,400
*2 Power input kW 0.140 0.197 0.206
*2 Current input A 1.01-0.97-0.93 1.29-1.23-1.18 1.40-1.34-1.28
External finish Galvanized steel plate Galvanized steel plate Galvanized steel plate
External dimension H x W x D mm 250 x 1,400 x 732 250 x 1,400 x 732 250 x 1,600 x 732
in. 9-7/8 x 55-1/8 x 28-7/8 9-7/8 x 55-1/8 x 28-7/8 9-7/8 x 63 x 28-7/8
Net weight kg (lbs) 36 (80) 37 (82) 41 (91)
Heat exchanger
Cross fin (Aluminum fin and
copper tube)
Cross fin (Aluminum fin and
copper tube)
Cross fin (Aluminum fin and
copper tube)
FAN Type x Quantity Sirocco fan x 3 Sirocco fan x 3 Sirocco fan x 3
*4
External static press.
Pa
40 - <50> - <70> - <100> -
<150>
<40> - 50 - <70> - <100> -
<150>
<40> - 50 - <70> - <100> -
<150>
mmH2O
4.1 - <5.1> - <7.1> - <10.2> -
<15.3>
<4.1> - 5.1 - <7.1> - <10.2> -
<15.3>
<4.1> - 5.1 - <7.1> - <10.2> -
<15.3>
Motor Type DC motor DC motor DC motor
Motor output kW 0.300 0.300 0.300
Driving mechanism Direct-driven by motor Direct-driven by motor Direct-driven by motor
Air flow rate (Low-Mid-High) (Low-Mid-High) (Low-Mid-High)
m3/min 23.0 - 28.0 - 32.0 28.0 - 34.0 - 37.0 29.5 - 35.5 - 40.0
L/s 383 - 467 - 533 467 - 567 - 617 492 - 592 - 667
cfm 812 - 989 - 1,130 989 - 1,201 - 1,306 1,042 - 1,254 - 1,412
Sound pressure level (measured in anechoic room) (Low-Mid-High) (Low-Mid-High) (Low-Mid-High)
*2, 5
dB <A>
30.0-35.0-38.0 34.0-38.0-40.0 33.0-37.0-40.0
*2, 6 27.0-32.0-35.0 31.0-35.0-37.0 30.0-34.0-37.0
Insulation material
EPS, Polystyrene foam, Ure-
thane foam
EPS, Polystyrene foam, Ure-
thane foam
EPS, Polystyrene foam, Ure-
thane foam
Air filter PP honeycomb fabric. PP honeycomb fabric. PP honeycomb fabric.
Protection device Fuse Fuse Fuse
Refrigerant control device LEV LEV LEV
Connectable outdoor unit R32, R410A CITY MULTI R32, R410A CITY MULTI R32, R410A CITY MULTI
Refrigerant piping Liquid mm (in.) 9.52 (3/8)Brazed 9.52 (3/8)Brazed 9.52 (3/8)Brazed
diameter Gas mm (in.) 15.88 (5/8)Brazed 15.88 (5/8)Brazed 15.88 (5/8)Brazed
Field drain pipe size mm (in.) O.D.32 (1-1/4") O.D.32 (1-1/4") O.D.32 (1-1/4")
Drawing External KB94C15Z KB94C15Z KB94C15Z
Wiring KB94C15X KB94C15X KB94C15X
Refrigerant cycle - - -
Standard attachment Document
Installation Manual, Instruction
Book
Installation Manual, Instruction
Book
Installation Manual, Instruction
Book
Accessory Washer, Drain hose, Tie band Washer, Drain hose, Tie band Washer, Drain hose, Tie band
Optional parts Filter box PAC-KE94TB-E PAC-KE94TB-E PAC-KE95TB-E
Plasma Quad Connect MAC-100FT-E MAC-100FT-E MAC-100FT-E
PQ attachment (Rear inlet) PAC-HA31PAR PAC-HA31PAR PAC-HA31PAR
PQ attachment (Bottom inlet) PAC-HA31PAU PAC-HA31PAU PAC-HA31PAU
PQ box PAC-KE94PTB-E PAC-KE94PTB-E PAC-KE95PTB-E
Remarks * Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be referred
to the Installation Manual.
* Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter
1.Nominal cooling conditions
Indoor:27°CDB/19°CWB (81°FDB/66°FWB), Outdoor:35°CDB (95°FDB)
Pipe length:7.5m (24-9/16ft.), Level difference:0m (0ft.)
2.The values are measured at the factory setting of external static pressure.
3.Nominal heating conditions
Indoor:20°CDB (68°FDB), Outdoor:7°CDB/6°CWB (45°FDB/43°FWB)
Pipe length:7.5m (24-9/16ft.), Level difference:0m (0ft.)
4.The factory setting of airflow mode and external static pressure mode is shown without < >.
Refer to "Fan characteristics curves", according to the external static pressure, in DATA BOOK for the usable range of air flow rate.
5.Measured in anechoic room with a 1 m air inlet duct and 2 m air outlet duct attached to the unit and 1.5 m below
the unit.
6.Measured in anechoic room with a 2 m air inlet duct and 2 m air outlet duct attached to the unit and 1.5 m below
the unit.
* The sound pressure level measured by the conventional method in JIS.
* R32 is flammable, and certain restrictions apply to the installation of units.
For detail, refer to the section in the Databook on installation restrictions.
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg/0.4536
*Above specification data is
subject to rounding variation.
0000006347.BOOK 7 ページ 2021年7月13日 火曜日 午前9時52分
9. MEES21K075
PEFY-M-VMA(L)-A
8
2. EXTERNAL DIMENSIONS Ceiling concealed (Medium static pressure type)
2. EXTERNAL DIMENSIONS
PEFY-M20, 25, 32, 40, 50, 63, 71, 80, 100, 125, 140VMA-A
Unit: mm
Control
box
2×2-ø2.9
Air
outlet
Air
inlet
2×E-ø2.9
Refrigerant
piping
Brazing
connection
(liquid)
2
1
Refrigerant
piping
Brazing
connection
(gas)
Drain
pump
Air
Filter
Terminal
block
(Power
source)
Terminal
block
(Transmission)
Drain
pipe(O.D.ø32)
(Spontaneous
draining)
Drain
pipe
(O.D.ø32)
Suspension
bolt
hole
4-14×30
Slot
Drain
hose
(I.D.ø32)
<Accessory>
(Actual
length)
Note
1.Use
M10
screw
for
the
Suspension
bolt
(field
supply).
2.Keep
the
service
space
for
the
maintenance
at
the
bottom.
3.This
chart
indicates
for
PEFY-M71·80VMA-A
models,
which
have
2
fans.PEFY-M20·25·32VMA-A
models
have
1
fan.
PEFY-M40·50·63VWA-A
models
have
2
fans.
PEFY-M100·125·140VMA-A
models
have
3
fans.
4.In
case
of
the
inlet
duct
is
used,
remove
the
air
filter
(supply
with
the
unit),
then
install
the
filter
(field
supply)
at
suction
side.
ø9.52
ø12.7
ø6.35
ø15.88
1558
1358
1500
1300
7
Model
A
660
800
1200
700
754
900
954
860
9
E
11
D
1060
C
1100
B
1154
PEFY-M140VMA-A
PEFY-M100,
125VMA-A
PEFY-M71,
80VMA-A
PEFY-M40,
50VMA-A
PEFY-M20,
25,
32VMA-A
1400
1600
1454
1654
1500
1700
1360
1560
14
16
1000
1000
F
858
800
G
658
1058
600
900
954
860
9
PEFY-M63VMA-A
1000
858
800
Inlet
air
side
view
Outlet
air
side
view
Top
Bottom
Piping
side
view
Top
view
40
250
40
33
122
D
(Duct) 20
210
18
G 21
100
57
73
10
A
B
(Suspension
bolt
pitch)
C
23
643
(Suspension
bolt
pitch)
178(Duct)
23
10
238
32
700
732
136
67
356
100
41
217
100
30
100×(E-1)=F
15
58
65
0
-10
Less
than
300mm Less
than
700mm
Liquid
pipe
2
Gas
pipe
1
0000006347.BOOK 8 ページ 2021年7月13日 火曜日 午前9時52分
10. MEES21K075
PEFY-M-VMA(L)-A
9
2. EXTERNAL DIMENSIONS Ceiling concealed (Medium static pressure type)
PEFY-M20, 25, 32, 40, 50, 63, 71, 80, 100, 125, 140VMA-A
Unit: mm
J×(L-1)=M
J
H
6
K
J
H
112
11 112
700
700
475
Min.10mm
475
Min.10mm
450
450
50
Q
50~150
450
Min.300mm
450
450
450
50
Min.300mm
50
700
777
777
R
S
P P
P
Min.300mm
Min.300mm
Min.20mm
50
N-ø2.9
Maintenance
access
space
Maintenance
access
space
Maintenance
access
space
Access
door
3
Access
door
4
Access
door
2
(450×450)
Ceiling
Ceiling
A
B
Fig.3
Fig.4
Fig.2
Fig.1
Fig.5
(Viewed
from
the
direction
of
the
arrow
A)
(Viewed
from
the
direction
of
the
arrow
B)
(Viewed
from
the
direction
of
the
arrow
B)
Intake
air
Intake
air
Supply
air
Supply
air
Access
door
2
(450×450)
Access
door
3
Ceiling
beam
Ceiling
beam
Bottom
of
indoor
unit
Bottom
of
indoor
unit
Bottom
of
indoor
unit
100~200
100~200
Access
door
1
(450×450)
Access
door
1
(450×450)
Control
box
Control
box
Control
box
Control
box
Control
box
[Maintenance
access
space]
Secure
enough
access
space
to
allow
for
the
maintenance,
inspection,
and
replacement
of
the
motor,
fan,
drain
pump,
heat
exchanger,
and
control
box
in
one
of
the
following
ways.
Select
an
installation
site
for
the
indoor
unit
so
that
its
maintenance
access
space
will
not
be
obstructed
by
beams
or
other
objects.
(1)
When
a
space
of
300mm
or
more
is
available
below
the
unit
between
the
unit
and
the
ceiling.
(Fig.1)
·
Create
access
door
1
and
2
(450×450mm
each)
as
shown
in
Fig.2.
(Access
door
2
is
not
required
if
enough
space
is
available
below
the
unit
for
a
maintenance
worker
to
work
in.)
(2)
When
a
space
of
less
than
300mm
is
available
below
the
unit
between
the
unit
and
the
ceiling.
(At
least
20mm
of
space
should
be
left
below
the
unit
as
shown
in
Fig.3.)
·
Create
access
door
1
diagonally
below
the
control
box
and
access
door
3
below
the
unit
as
shown
in
Fig.4.
or
·
Create
access
door
4
below
the
control
box
and
the
unit
as
shown
in
Fig.5.
12
H
Model
PEFY-M20,
25,
32VMA-A
PEFY-M40,
50,
63VMA-A
PEFY-M71,
80VMA-A
PEFY-M100,
125VMA-A
PEFY-M140VMA-A
12
1480
1280
5
5
370
320
54
54
330
K
49
L
4
M
990
N
10
10
780
4
260
54
150
44
300
J
10
900
150~250
1000
1500
1100
1400
1600
250~350
400~500
500~600
1200
1500
1700
1700
2000
2200
P
Q
R
S
700
50~150
800
1300
0000006347.BOOK 9 ページ 2021年7月13日 火曜日 午前9時52分
11. MEES21K075
PEFY-M-VMA(L)-A
10
2. EXTERNAL DIMENSIONS Ceiling concealed (Medium static pressure type)
PEFY-M20, 25, 32, 40, 50, 63, 71, 80, 100, 125, 140VMA-A Suction filter box built-in-specification
Unit: mm
Control
box
2×2-ø2.9
Air
outlet
2×E-ø2.9
Refrigerant
piping
Brazing
connection
(liquid)
2
1
Refrigerant
piping
Brazing
connection
(gas)
Drain
pump
Terminal
block
(Power
source)
Terminal
block
(Transmission)
Drain
pipe
(O.D.ø32)
(Spontaneous
draining)
Drain
pipe
(O.D.ø32)
Suspension
bolt
hole
4-14×30
Slot
Drain
hose
(I.D.ø32)
<Accessory>
(Actual
length)
Air
inlet
2×H-ø2.9
2×1-ø2.9
Filter
box
Air
Filter
3
Air
Filter
Note
1.Use
M10
screw
for
the
Suspension
bolt
(field
supply).
2.Keep
the
service
space
for
the
maintenance
at
the
bottom.
3.This
chart
indicates
for
PEFY-M71·80VMA-A
models,
which
have
2
fans.PEFY-M20·25·32VMA-A
models
have
1
fan.
PEFY-M40·50·63VWA-A
models
have
2
fans.
PEFY-M100·125·140VMA-A
models
have
3
fans.
4.Use
air
filter
installed
with
indoor
unit.
1558
1358
1500
1300
7
Model
A
660
800
1200
700
754
900
954
860
9
E
11
D
1060
C
1100
B
1154
PEFY-M140VMA-A
PEFY-M100,125VMA-A
PEFY-M71,80VMA-A
PEFY-M40,50,63VMA-A
PEFY-M20,25,32VMA-A
1400
1600
1454
1654
1500
1700
1360
1560
14
16
1000
1000
F
858
800
G
658
1058
600
<Suction
filter
box
built-in-specification>
1500
1300
1000
H
800
J
600
7
9
11
14
16
ø9.52
ø12.7
ø6.35
ø15.88
2
Liquid
pipe
1
Gas
pipe
Model
PEFY-M140VMA-A
PEFY-M100,125VMA-A
PEFY-M71,80VMA-A
PEFY-M40,50VMA-A
PEFY-M20,25,32VMA-A
PEFY-M63VMA-A
PAC-KE91TB-E
PAC-KE92TB-E
PAC-KE93TB-E
PAC-KE94TB-E
PAC-KE95TB-E
3
Filter
box
PAC-KE92TB-E
Top
Bottom
Piping
side
view
Inlet
air
side
view
Top
view
250
40
33
122
D
(Duct) 20
15
G
(Duct) 21
100
57
73
10
A
B
(Suspension
bolt
pitch)
C
23
643
(Suspension
bolt
pitch)
178
(Duct)
23
10
238
32
700
136
67
356
100
41
217
100
30
100×(E-1)=F
65
0
-10
Less
than
300mm
Less
than
700mm
40
58
29
100×(H-1)=J
10
100
911
153
26
20 208(Duct)
104
10
0000006347.BOOK 10 ページ 2021年7月13日 火曜日 午前9時52分
12. MEES21K075
PEFY-M-VMA(L)-A
11
2. EXTERNAL DIMENSIONS Ceiling concealed (Medium static pressure type)
PEFY-M20, 25, 32, 40, 50, 63, 71, 80, 100, 125, 140VMA-A Suction filter box built-in-specification
Unit: mm
P
Min.480mm
853
50
50
628
853
Min.480mm
853
450
628
Min.10mm
Min.10mm
450
450
L
50~150
Min.480mm
450
450
450
50
50
960
960
M
N
K K
K
Min.300mm
Min.20mm
Maintenance
access
space
Maintenance
access
space
Maintenance
access
space
Access
door
3
Access
door
4
Access
door
2
(450×450)
Ceiling
Ceiling
A
B
Fig.3
Fig.4
Fig.2
Fig.1
Fig.5
(Viewed
from
the
direction
of
the
arrow
A)
*In
case
of
side
maintenance
for
air
filter.
*In
case
of
side
maintenance
for
air
filter.
More
than
200
More
than
200
(Viewed
from
the
direction
of
the
arrow
B)
(Viewed
from
the
direction
of
the
arrow
B)
Intake
air
Intake
air
Supply
air
Supply
air
Access
door
2
(450×450)
Access
door
3
Ceiling
beam
Ceiling
beam
Bottom
of
indoor
unit
Bottom
of
indoor
unit
Bottom
of
indoor
unit
250~300
250~300
Access
door
1
(450×450)
Access
door
1
(450×450)
Control
box
Control
box
Control
box
Control
box
Control
box
<Suction
filter
box
built-in-specification>
[Maintenance
access
space]
Secure
enough
access
space
to
allow
for
the
maintenance,
inspection,
and
replacement
of
the
motor,
fan,
drain
pump,
heat
exchanger,
and
control
box
in
one
of
the
following
ways.
Select
an
installation
site
for
the
indoor
unit
so
that
its
maintenance
access
space
will
not
be
obstructed
by
beams
or
other
objects.
(1)
When
a
space
of
300mm
or
more
is
available
below
the
unit
between
the
unit
and
the
ceiling.
(Fig.1)
·
Create
access
door
1
and
2
(450×450mm
each)
as
shown
in
Fig.2.
(Access
door
2
is
not
required
if
enough
space
is
available
below
the
unit
for
a
maintenance
worker
to
work
in.)
(2)
When
a
space
of
less
than
300mm
is
available
below
the
unit
between
the
unit
and
the
ceiling.
(At
least
20mm
of
space
should
be
left
below
the
unit
as
shown
in
Fig.3.)
·
Create
access
door
1
diagonally
below
the
control
box
and
access
door
3
below
the
unit
as
shown
in
Fig.4.
or
·
Create
access
door
4
below
the
control
box
and
the
unit
as
shown
in
Fig.5.
PEFY-M20,
25,
32VMA-A
PEFY-M40,
50,
63VMA-A
PEFY-M71,
80VMA-A
PEFY-M100,
125VMA-A
PEFY-M140VMA-A
Model
2550
2150
1850
1450
900
150~250
1000
1500
1100
1400
1600
250~350
400~500
500~600
1200
1500
1700
1700
2000
2200
K
L
M
N
P
*
700
50~150
800
1300
*
Dimension
'P'
is
in
case
of
side
maintenance
for
air
filter.
0000006347.BOOK 11 ページ 2021年7月13日 火曜日 午前9時52分
13. MEES21K075
PEFY-M-VMA(L)-A
12
2. EXTERNAL DIMENSIONS Ceiling concealed (Medium static pressure type)
PEFY-M20, 25, 32, 40, 50, 63, 71, 80, 100, 125, 140VMAL-A
Unit: mm
Control
box
2×2-ø2.9
Air
outlet
Air
inlet
2×E-ø2.9
Refrigerant
piping
Brazing
connection
(liquid)
2
1
Refrigerant
piping
Brazing
connection
(gas)
Air
Filter
Terminal
block
(Power
source)
Terminal
block
(Transmission)
Drain
pipe
(O.D.ø32)
Suspension
bolt
hole
4-14×30
Slot
<Accessory>
Drain
hose
(I.D.ø32)
(Actual
length)
Note
1.Use
M10
screw
for
the
Suspension
bolt
(field
supply).
2.Keep
the
service
space
for
the
maintenance
at
the
bottom.
3.This
chart
indicates
for
PEFY-M71·80VMAL-A
models,
which
have
2
fans.PEFY-M20·25·32VMAL-A
models
have
1
fan.
PEFY-M40·50·63VMAL-A
models
have
2
fans.
PEFY-M100·125·140VMAL-A
models
have
3
fans.
4.In
case
of
the
inlet
duct
is
used,
remove
the
air
filter
(supply
withthe
unit),
then
install
the
filter
(field
supply)
at
suction
side.
ø9.52
ø12.7
ø6.35
ø15.88
2
Liquid
pipe
1
Gas
pipe
1558
1358
1500
1300
7
Model
A
660
800
1200
700
754
900
954
860
9
E
11
D
1060
C
1100
B
1154
PEFY-M140VMAL-A
PEFY-M100,
125VMAL-A
PEFY-M71,
80VMAL-A
PEFY-M40,
50VMAL-A
PEFY-M20,
25,
32VMAL-A
1400
1600
1454
1654
1500
1700
1360
1560
14
16
1000
1000
F
858
800
G
658
1058
600
900
954
860
9
PEFY-M63VMAL-A
1000
858
800
Top
Bottom
Piping
side
view
Top
view
Inlet
air
side
view
Outlet
air
side
view
250
40
33
122
D
(Duct) 20
210
18
G 21
100
57
73
10
A
B
(Suspension
bolt
pitch)
C
23
643
(Suspension
bolt
pitch)
178(Duct)
23
10
32
700
732
136
67
356
100
217
100
30
100×(E-1)=F
15
24
32
0
-10
0000006347.BOOK 12 ページ 2021年7月13日 火曜日 午前9時52分
14. MEES21K075
PEFY-M-VMA(L)-A
13
2. EXTERNAL DIMENSIONS Ceiling concealed (Medium static pressure type)
PEFY-M20, 25, 32, 40, 50, 63, 71, 80, 100, 125, 140VMAL-A
Unit: mm
J×(L-1)=M
J
H
6
K
J
H
112
11 112
700
700
475
Min.10mm
475
Min.10mm
450
450
50
Q
50~150
450
Min.300mm
450
450
450
50
Min.300mm
50
700
777
777
R
S
P P
P
Min.300mm
Min.300mm
Min.20mm
50
N-ø2.9
Maintenance
access
space
Maintenance
access
space
Maintenance
access
space
Access
door
3
Access
door
4
Access
door
2
(450×450)
Ceiling
Ceiling
A
B
Fig.3
Fig.4
Fig.2
Fig.1
Fig.5
(Viewed
from
the
direction
of
the
arrow
A)
(Viewed
from
the
direction
of
the
arrow
B)
(Viewed
from
the
direction
of
the
arrow
B)
Intake
air
Intake
air
Supply
air
Supply
air
Access
door
2
(450×450)
Access
door
3
Ceiling
beam
Ceiling
beam
Bottom
of
indoor
unit
Bottom
of
indoor
unit
Bottom
of
indoor
unit
100~200
100~200
Access
door
1
(450×450)
Access
door
1
(450×450)
Control
box
Control
box
Control
box
Control
box
Control
box
[Maintenance
access
space]
Secure
enough
access
space
to
allow
for
the
maintenance,
inspection,
and
replacement
of
the
motor,
fan,
heat
exchanger,
and
control
box
in
one
of
the
following
ways.
Select
an
installation
site
for
the
indoor
unit
so
that
its
maintenance
access
space
will
not
be
obstructed
by
beams
or
other
objects.
(1)
When
a
space
of
300mm
or
more
is
available
below
the
unit
between
the
unit
and
the
ceiling.
(Fig.1)
·
Create
access
door
1
and
2
(450×450mm
each)
as
shown
in
Fig.2.
(Access
door
2
is
not
required
if
enough
space
is
available
below
the
unit
for
a
maintenance
worker
to
work
in.)
(2)
When
a
space
of
less
than
300mm
is
available
below
the
unit
between
the
unit
and
the
ceiling.
(At
least
20mm
of
space
should
be
left
below
the
unit
as
shown
in
Fig.3.)
·
Create
access
door
1
diagonally
below
the
control
box
and
access
door
3
below
the
unit
as
shown
in
Fig.4.
or
·
Create
access
door
4
below
the
control
box
and
the
unit
as
shown
in
Fig.5.
Model
PEFY-M20,
25,
32VMAL-A
PEFY-M40,
50,
63VMAL-A
PEFY-M71,
80VMAL-A
PEFY-M100,
125VMAL-A
PEFY-M140VMAL-A
12
H
12
1480
1280
5
5
370
320
54
54
330
K
49
L
4
M
990
N
10
10
780
4
260
54
150
44
300
J
10
900
150〜250
1000
1500
1100
1400
1600
250〜350
400〜500
500〜600
1200
1500
1700
1700
2000
2200
P
Q
R
S
700
50〜150
800
1300
0000006347.BOOK 13 ページ 2021年7月13日 火曜日 午前9時52分
15. MEES21K075
PEFY-M-VMA(L)-A
14
2. EXTERNAL DIMENSIONS Ceiling concealed (Medium static pressure type)
PEFY-M20, 25, 32, 40, 50, 63, 71, 80, 100, 125, 140VMAL-A Suction filter box built-in-specification
Unit: mm
250
40
33
122
D
(Duct) 20
15
G
(Duct) 21
100
57
73
10
A
B
(Suspension
bolt
pitch)
C
23
643
(Suspension
bolt
pitch)
178(Duct)
23
10
32
700
136
67
356
100
217
100
30
100×(E-1)=F
32
0
-10
24
10
100×(H-1)=J
100
29
2×H-ø2.9
104
911
26
153
208(Duct)
20
10
2×2-ø2.9
Air
outlet
2×E-ø2.9
Refrigerant
piping
Brazing
connection
(liquid)
2
1
Refrigerant
piping
Brazing
connection
(gas)
Drain
pipe
(O.D.ø32)
Suspension
bolt
hole
4-14×30
Slot
<Accessory>
Drain
hose
(I.D.ø32)
(Actual
length)
Air
Filter
Air
inlet
Control
box
Filter
box
2×1-ø2.9
3
Terminal
block
(Power
source)
Terminal
block
(Transmission)
Air
Filter
1558
1358
1500
1300
7
Model
A
660
800
1200
700
754
900
954
860
9
E
11
D
1060
C
1100
B
1154
PEFY-M140VMAL-A
PEFY-M100,
125VMAL-A
PEFY-M71,
80VMAL-A
PEFY-M40,
50,
63VMAL-A
PEFY-M20,
25,
32VMAL-A
1400
1600
1454
1654
1500
1700
1360
1560
14
16
1000
1000
F
858
800
G
658
1058
600
<Suction
filter
box
built-in-specification>
1500
1300
1000
H
800
J
600
7
9
11
14
16
ø9.52
ø12.7
ø6.35
ø15.88
2
Liquid
pipe
1
Gas
pipe
Model
PEFY-M140VMAL-A
PEFY-M100,
125VMAL-A
PEFY-M71,
80VMAL-A
PEFY-M40,
50VMAL-A
PEFY-M20,
25,
32VMAL-A
PEFY-M63VMAL-A
PAC-KE91TB-E
PAC-KE92TB-E
PAC-KE93TB-E
PAC-KE94TB-E
PAC-KE95TB-E
3
Filter
box
PAC-KE92TB-E
Top
view
Inlet
air
side
view
Top
Bottom
Piping
side
view
Note
1.Use
M10
screw
for
the
Suspension
bolt
(field
supply).
2.Keep
the
service
space
for
the
maintenance
at
the
bottom.
3.This
chart
indicates
for
PEFY-M71·80VMAL-A
models,
which
have
2
fans.PEFY-M20·25·32VMAL-A
models
have
1
fan.
PEFY-M40·50·63VMAL-A
models
have
2
fans.
PEFY-M100·125·140VMAL-A
models
have
3
fans.
4.Use
air
filter
installed
with
indoor
unit.
0000006347.BOOK 14 ページ 2021年7月13日 火曜日 午前9時52分
16. MEES21K075
PEFY-M-VMA(L)-A
15
2. EXTERNAL DIMENSIONS Ceiling concealed (Medium static pressure type)
PEFY-M20, 25, 32, 40, 50, 63, 71, 80, 100, 125, 140VMAL-A Suction filter box built-in-specification
Unit: mm
P
Min.480mm
853
50
50
628
853
Min.480mm
853
450
628
Min.10mm
Min.10mm
450
450
L
50~150
Min.480mm
450
450
450
50
50
960
960
M
N
K K
K
Min.300mm
Min.20mm
Maintenance
access
space
Maintenance
access
space
Maintenance
access
space
Access
door
3
Access
door
4
Access
door
2
(450×450)
Ceiling
Ceiling
A
B
Fig.3
Fig.4
Fig.2
Fig.1
Fig.5
(Viewed
from
the
direction
of
the
arrow
A)
*
In
case
of
side
maintenance
for
air
filter.
*
In
case
of
side
maintenance
for
air
filter.
More
than
200
More
than
200
(Viewed
from
the
direction
of
the
arrow
B)
(Viewed
from
the
direction
of
the
arrow
B)
Intake
air
Intake
air
Supply
air
Supply
air
Access
door
2
(450×450)
Access
door
3
Ceiling
beam
Ceiling
beam
Bottom
of
indoor
unit
Bottom
of
indoor
unit
Bottom
of
indoor
unit
250~300
250~300
Access
door
1
(450×450)
Access
door
1
(450×450)
Control
box
Control
box
Control
box
Control
box
Control
box
<Suction
filter
box
built-in-specification>
[Maintenance
access
space]
Secure
enough
access
space
to
allow
for
the
maintenance,
inspection,
and
replacement
of
the
motor,
fan,
heat
exchanger,
and
control
box
in
one
of
the
following
ways.
Select
an
installation
site
for
the
indoor
unit
so
that
its
maintenance
access
space
will
not
be
obstructed
by
beams
or
other
objects.
(1)
When
a
space
of
300mm
or
more
is
available
below
the
unit
between
the
unit
and
the
ceiling.
(Fig.1)
·
Create
access
door
1
and
2
(450×450mm
each)
as
shown
in
Fig.2.
(Access
door
2
is
not
required
if
enough
space
is
available
below
the
unit
for
a
maintenance
worker
to
work
in.)
(2)
When
a
space
of
less
than
300mm
is
available
below
the
unit
between
the
unit
and
the
ceiling.
(At
least
20mm
of
space
should
be
left
below
the
unit
as
shown
in
Fig.3.)
·
Create
access
door
1
diagonally
below
the
control
box
and
access
door
3
below
the
unit
as
shown
in
Fig.4.
or
·
Create
access
door
4
below
the
control
box
and
the
unit
as
shown
in
Fig.5.
PEFY-M20,
25,
32VMAL-A
PEFY-M40,
50,
63VMAL-A
PEFY-M71,
80VMAL-A
PEFY-M100,
125VMAL-A
PEFY-M140VMAL-A
Model
2550
2150
1850
1450
900
150~250
1000
1500
1100
1400
1600
250~350
400~500
500~600
1200
1500
1700
1700
2000
2200
K
L
M
N
P
*
700
50~150
800
1300
*
Dimension
'P'
is
in
case
of
side
maintenance
for
air
filter.
0000006347.BOOK 15 ページ 2021年7月13日 火曜日 午前9時52分
18. MEES21K075
PEFY-M-VMA(L)-A
17
4. ELECTRICAL WIRING DIAGRAMS Ceiling concealed (Medium static pressure type)
4. ELECTRICAL WIRING DIAGRAMS
PEFY-M20, 25, 32, 40, 50, 63, 71, 80, 100, 125, 140VMA(L)-A
L
N
OFF
ON
CND
(Red)
CNMF1
INSIDE
SECTION
OF
CONTROL
BOX
SWE
TB2
3
CNP
LED1
POWER
SUPPLY
AC220,230,240V
50Hz
M1
M2
3
1
7
S
CN2M
(Blue)
1
1
2
TB15
1
CN3A
(Blue)
3
5 6
7
8
9
0
1
2
3
4
SW12
(10ths
digit)
SW1
SW2
SW3
SW4
SW21
SW22
CN20
(Red)
6
CN60
4
3
2
1
DP
M
3~
LEV
M
(SHEILD)
TB5
TO
NEXT
INDOOR
UNIT
BREAKER(16A)
FUSE(16A)
PULL
BOX
TO
MA
REMOTE
CONTROLLER
TO
OUTDOOR
UNIT
BC
CONTROLLER
REMOTE
CONTROLLER
MF
M
3~
1
CNACL
(Black)
SA
U
U
ZNR001
ZNR002
F1
CN51
CN52
(Green)
CN32
*ONLY
FOR
PEFY-M·VMA-A
CN105
(Red)
0
9
8
7
6
5
4
3
2
1
SW11
(1s
digit)
0
8
7
6
5
4
3
2
1
SW14
(BRANCH
No.)
F
E
D
C
B
A
9
LED2
CN90
FS
3
CN44
4
1
2
TH22
3
4
1
2
*FOR
PEFY-M·VMAL-A
CN2A
(Black)
ACL
I.B.
CN41
CN4F
3
4
1
2
1
2
4
1
3
5
2
DC280-340V
Rectifier
circuit
CN27
(Red)
F2
CN22
(Green)
CN4F
TH23
TH21
5
6
7
4
1
5
6
2
1
ACL
SYMBOL
SYMBOL
EXPLANATION
NAME
AC
reactor(Power
factor
improvement)
Drain
Pump
Float
switch
Power
source
terminal
block
Transmission
terminal
block
Transmission
terminal
block
Thermistor
(inlet
air
temp.
detection)
Thermistor
(piping
temp.detection/liquid)
Thermistor
(piping
temp.detection/gas)
DP
FS
TB2
TB5
TB15
TH21
TH22
TH23
CN2A
Connector
(0-10V
Analog
input)
CN32
Connector
(Remote
switch)
CN41
Connector
(HA
terminal-A)
CN51
Connector
(Centrally
control)
CN52
Connector
(Remote
indication)
CN90
Connector
(Wireless)
CN105
Connector
(IT
terminal)
SW1
Switch
(for
mode
selection)
SW2
Switch
(for
capacity
code)
SW3
Switch
(for
mode
selection)
SW14
Switch
(BRANCH
No.)
SW21
Switch
(for
static
pressure
selection)
SW22
Switch
(Wireless
pair
No.)
SWE
Connector
(emergency
operation)
LED1
LED(Power
supply)
LED2
LED(Remote
controller
supply)
SYMBOL
NAME
SYMBOL
NAME
SA
Arrester
F1
Fuse
AC250V
6.3A
ZNR001,002
Varistor
SW4
Switch
(for
model
selection)
SW11
Switch
(1s
digit
address
set)
SW12
Switch
(10ths
digit
address
set)
I.B.
Indoor
controller
board
I.B.
Indoor
controller
board
Linear
expansion
valve
LEV
Fuse
DC400V
3A
F2
CN27
Connector
(Damper)
Fan
Motor
MF
CN22
Connector
(Optional
Thermistor)
NOTE)1.Symbols
used
in
wiring
diagram
are
:
Connector,
:
Terminal,
(Heavy
dotted
line):
Field
wiring,
2.Have
all
electric
work
done
by
a
licensed
electrician
according
to
the
local
regulations.
3.Earth
leakage
circuit
breaker
should
be
set
up
on
the
wiring
of
the
power
supply.
4.To
perform
a
drainage
test
for
the
drain
pump
turn
on
the
SWE
on
the
control
board
while
the
indoor
unit
is
being
powered.
*Be
sure
to
turn
off
the
SWE
after
completing
a
drainage
test
or
test
run.
t°
t°
t°
0000006347.BOOK 17 ページ 2021年7月13日 火曜日 午前9時52分
35. MEES21K075
PEFY-M-VMA(L)-A
34
9. OPTIONAL PARTS Ceiling concealed (Medium static pressure type)
9. OPTIONAL PARTS
9-1. Optional parts line up for the Indoor unit
9-2. Filter box
PEFY-M20, 25, 32VMA(L)-A
PEFY-M40, 50, 63VMA(L)-A
PEFY-M71, 80VMA(L)-A
PEFY-M100, 125VMA(L)-A
PEFY-M140VMA(L)-A
Filter box
PAC-KE91TB-E
PAC-KE92TB-E
PAC-KE93TB-E
PAC-KE94TB-E
PAC-KE95TB-E
PEFY-M-VMA(L)-A
Plasma Quad Connect
MAC-100FT-E
MAC-100FT-E
MAC-100FT-E
MAC-100FT-E
MAC-100FT-E
PQ attachment (Rear inlet)
PAC-HA31PAR
PAC-HA31PAR
PAC-HA31PAR
PAC-HA31PAR
PAC-HA31PAR
PQ attachment (Bottom inlet)
PAC-HA31PAU
PAC-HA31PAU
PAC-HA31PAU
PAC-HA31PAU
PAC-HA31PAU
PQ box
PAC-KE91PTB-E
PAC-KE92PTB-E
PAC-KE93PTB-E
PAC-KE94PTB-E
PAC-KE95PTB-E
Filter box
PAC-KE·TB-E
PAC-KE-TB-E
Item Screw Filter box Installation manual
Quantity 30 1
FLANGE
1 1
Shape
Detailed installation information should be referred to its Installation Manual.
1 2 3 4
0000006347.BOOK 34 ページ 2021年7月13日 火曜日 午前9時52分
36. MEES21K075
PEFY-M-VMA(L)-A
35
9. OPTIONAL PARTS Ceiling concealed (Medium static pressure type)
9-3. Plasma Quad Connect
Static pressure loss is referred to 6 “FAN CHARACTERISTICS CURVES”.
Plasma Quad Connect (MAC-100FT-E) should be used together with PQ box or PQ attachment (PAC-HA31PAR or PAC-HA31PAU).
*Attaching the Plasma Quad Connect increases the pressure loss. Adjust the external static pressure setting as necessary. For the adjustment procedure, see
the Installation Manual for the indoor unit.
Plasma Quad Connect (MAC-100FT-E)
Item Plasma Quad Connect (with connecting cable) Installation plate
Fixing screw for Plasma Quad Connect and
Installation plate 4 × 25 mm
Quantity 1 1 5
Shape
Item
Spacer
Note: The spacer is used as packaging material.
Mounting cord clamp Cable tie
Quantity 1 1 1
Shape
Item
Screw for Mounting cord clamp 4 × 16
(Use when joining room air conditioner parts)
Quantity 1
Shape
Detailed installation information should be referred to its Installation Manual.
PQ attachment (Rear inlet) (PAC-HA31PAR)
Item PLATE 1
Quantity 1
PLATE 2
–
PLATE 3
1
PLATE 4
1
Screw (4 × 10)
3
Screw (5 × 10)
2
RUBBER PLATE
2
RUBBER PLATE
2
Shape
Detailed installation information should be referred to its Installation Manual.
PQ box (PAC-KE91, 92, 93, 94, 95PTB-E)
Item
Quantity
Screw (4 × 10)
22 (PAC-KE91PTB-E)
26 (PAC-KE92, 93PTB-E)
32 (PAC-KE94, 95PTB-E)
2
WIRING COVER
1 2
SUCTION FLANGE
1
RUBBER PLATE
CABLE STRAP
Shape
Detailed installation information should be referred to its Installation Manual.
PQ attachment (Bottom inlet) (PAC-HA31PAU)
Item PLATE 1
Quantity 1
PLATE 2
1
PLATE 3
1
PLATE 4
1
Screw (4 × 10)
9
CABLE STRAP
1
WIRE SADDLE
1
Shape
Detailed installation information should be referred to its Installation Manual.
0000006347.BOOK 35 ページ 2021年7月13日 火曜日 午前9時52分
37. MEES21K075
PEFY-M-VMA(L)-A
36
9. OPTIONAL PARTS Ceiling concealed (Medium static pressure type)
Air
outlet
Air
inlet
100
A
41
509
267
250
732
69
801
B
Plasma
quad
connect
Control
box
Cover
WIDE
A
B
700
850
900
1050
1100
1250
1400
1550
1600
1750
Top
Top
Bottom
view
Piping
side
view
Inlet
air
side
view
Front
Back
PEFY-P20, 25, 32, 40, 50, 63, 71, 80, 100, 125, 140VMA(L)-A
with PQ attachment (Rear inlet) and Plasma Quad Connect
Unit: mm
Model WIDE A B Model WIDE A B
PEFY-P20,25,32VMA(L)-A 700 850 PEFY-P100,125VMA(L)-A 1400 1550
PEFY-P40,50VMA(L)-A 900 1050 PEFY-P140VMA(L)-A 1600 1750
PEFY-P63,71,80VMA(L)-A 1100 1250
The drawing above is a sample image of the optional parts being installed on a unit.
0000006347.BOOK 36 ページ 2021年7月13日 火曜日 午前9時52分
38. MEES21K075
PEFY-M-VMA(L)-A
37
9. OPTIONAL PARTS Ceiling concealed (Medium static pressure type)
700
700
Min.300mm
Min.10mm
450
450
450
50~150
D
700
Min.300mm
C 50
50
F
777
777
50
E
50
475
C
450
Min.20mm
Min.300mm
C
450
475
450
Min.300mm
Min.10mm
Access
door
1
(450×450)
Access
door
3
Air
inlet
Access
door
1
(450×450)
Ceiling
beam
Access
door
2(450×450)
Control
box
Air
outlet
Air
outlet
Air
inlet
Maintenance
access
space
Control
box
Access
door
3
Control
box
100~200
Bottom
of
indoor
unit
(Viewed
from
the
direction
of
the
arrow
B)
B
Ceiling
beam
Ceiling
Access
door
2
(450×450)
Ceiling
A
Bottom
of
indoor
unit
100~200
Control
box
Fig.3
Fig.4
Fig.5
Fig.2
Fig.1
Maintenance
access
space
(Viewed
from
the
direction
of
the
arrow
B)
Bottom
of
indoor
unit
Access
door
4
Maintenance
access
space
(Viewed
from
the
direction
of
the
arrow
A)
Plasma
quad
connect
Plasma
quad
connect
Plasma
quad
connect
Control
box
Plasma
quad
connect
Plasma
quad
connect
Note.(3)
Note.(3)
WIDE
C
D
E
F
700
50~150
800
1300
900
150~250
1000
1500
1100
250~350
1200
1700
1400
400~500
1500
2000
1600
500~600
1700
2200
[Maintenance
access
space]
Secure
enough
access
space
to
allow
for
the
maintenance,
inspection,
and
replacement
of
the
motor,
fan,
drain
pump,
heat
exchanger,
and
control
box
in
one
of
the
following
ways.
Select
an
installation
site
for
the
indoor
unit
so
that
its
maintenance
access
space
will
not
be
obstructed
by
beams
or
other
objects.
(1)
When
a
space
of
300mm
or
more
is
available
below
the
unit
between
the
unit
and
the
ceiling.
(Fig.1)
•
Create
access
door
1
and
2
(450x450mm
each)
as
shown
in
Fig.2.
(Access
door
2
is
not
required
if
enough
space
is
available
below
the
unit
for
a
maintenance
worker
to
work
in.)
(2)
When
a
space
of
less
than
300mm
is
available
below
the
unit
between
the
unit
and
the
ceiling.
(At
least
20mm
of
space
should
be
left
below
the
unit
as
shown
in
Fig.3.)
•
Create
access
door
1
diagonally
below
the
control
box
and
access
door
3
below
the
unit
as
shown
in
Fig.4.
or
•
Create
access
door
4
below
the
control
box
and
the
unit
as
shown
in
Fig.5.
(3)
For
maintenance
if
there
is
more
than
170mm
from
the
top
surfce,
the
cover
can
be
pulled
out
without
removing
the
PQ
attachment.
(Fig.1,
Fig.3)
PEFY-P20, 25, 32, 40, 50, 63, 71, 80, 100, 125, 140VMA(L)-A
with PQ attachment (Rear inlet) and Plasma Quad Connect
Unit: mm
Model WIDE C D E F Model WIDE C D E F
PEFY-P20,25,32VMA(L)-A 700 50~150 800 1300 PEFY-P100,125VMA(L)-A 1400 400~500 1500 2000
PEFY-P40,50VMA(L)-A 900 150~250 1000 1500 PEFY-P140VMA(L)-A 1600 500~600 1700 2200
PEFY-P63,71,80VMA(L)-A 1100 250~350 1200 1700
The drawing above is a sample image of the optional parts being installed on a unit.
0000006347.BOOK 37 ページ 2021年7月13日 火曜日 午前9時52分
39. MEES21K075
PEFY-M-VMA(L)-A
38
9. OPTIONAL PARTS Ceiling concealed (Medium static pressure type)
Plasma
quad
connect
Control
box
Top
Top
Bottom
view
Piping
side
view
Back
view
Front
Back
Inlet
air
side
view
Air
outlet
Air
inlet
100
732
A
748
B
250
320
168
561
47
506
PEFY-P20, 25, 32, 40, 50, 63, 71, 80, 100, 125, 140VMA(L)-A
with PQ attachment (Bottom inlet) and Plasma Quad Connect
Unit: mm
WIDE
A
B
700
850
900
1050
1100
1250
1400
1550
1600
1750
Model WIDE A B Model WIDE A B
PEFY-P20,25,32VMA(L)-A 700 850 PEFY-P100,125VMA(L)-A 1400 1550
PEFY-P40,50VMA(L)-A 900 1050 PEFY-P140VMA(L)-A 1600 1750
PEFY-P63,71,80VMA(L)-A 1100 1250
The drawing above is a sample image of the optional parts being installed on a unit.
0000006347.BOOK 38 ページ 2021年7月13日 火曜日 午前9時52分
40. MEES21K075
PEFY-M-VMA(L)-A
39
9. OPTIONAL PARTS Ceiling concealed (Medium static pressure type)
700
700
Min.300mm
Min.10mm
450
450
450
50~150
D
700
Min.300mm
C 50
50
F
777
777
50
E
50
475
C
450
Min.20mm
Min.300mm
C
450
475
450
Min.300mm
Min.10mm
Access
door
1
(450×450)
Access
door
1
(450×450)
Maintenance
access
space
Control
box
Access
door
3
Control
box
100~200
Bottom
of
indoor
unit
(Viewed
from
the
direction
of
the
arrow
B)
B
Access
door
2
(450×450)
A
Bottom
of
indoor
unit
100~200
Control
box
Fig.3
Fig.4
Fig.5
Fig.2
Fig.1
Maintenance
access
space
(Viewed
from
the
direction
of
the
arrow
B)
Bottom
of
indoor
unit
Access
door
4
Maintenance
access
space
(Viewed
from
the
direction
of
the
arrow
A)
Plasma
quad
connect
Plasma
quad
connect
Plasma
quad
connect
Ceiling
beam
Air
outlet
Air
inlet
Control
box
Plasma
quad
connect
Access
door
3
Ceiling
Ceiling
beam
Air
outlet
Air
inlet
Control
box
Plasma
quad
connect
Access
door
2
(450x450)
Ceiling
WIDE
C
D
E
F
700
50~150
800
1300
900
150~250
1000
1500
1100
250~350
1200
1700
1400
400~500
1500
2000
1600
500~600
1700
2200
[Maintenance
access
space]
Secure
enough
access
space
to
allow
for
the
maintenance,
inspection,
and
replacement
of
the
motor,
fan,
drain
pump,
heat
exchanger,
and
control
box
in
one
of
the
following
ways.
Select
an
installation
site
for
the
indoor
unit
so
that
its
maintenance
access
space
will
not
be
obstructed
by
beams
or
other
objects.
(1)
When
a
space
of
300mm
or
more
is
available
below
the
unit
between
the
unit
and
the
ceiling.
(Fig.1)
•
Create
access
door
1
and
2
(450x450mm
each)
as
shown
in
Fig.2.
(Access
door
2
is
not
required
if
enough
space
is
available
below
the
unit
for
a
maintenance
worker
to
work
in.)
(2)
When
a
space
of
less
than
300mm
is
available
below
the
unit
between
the
unit
and
the
ceiling.
(At
least
20mm
of
space
should
be
left
below
the
unit
as
shown
in
Fig.3.)
•
Create
access
door
1
diagonally
below
the
control
box
and
access
door
3
below
the
unit
as
shown
in
Fig.4.
or
•
Create
access
door
4
below
the
control
box
and
the
unit
as
shown
in
Fig.5.
PEFY-P20, 25, 32, 40, 50, 63, 71, 80, 100, 125, 140VMA(L)-A
with PQ attachment (Bottom inlet) and Plasma Quad Connect
Unit: mm
Model WIDE C D E F Model WIDE C D E F
PEFY-P20,25,32VMA(L)-A 700 50~150 800 1300 PEFY-P100,125VMA(L)-A 1400 400~500 1500 2000
PEFY-P40,50VMA(L)-A 900 150~250 1000 1500 PEFY-P140VMA(L)-A 1600 500~600 1700 2200
PEFY-P63,71,80VMA(L)-A 1100 250~350 1200 1700
The drawing above is a sample image of the optional parts being installed on a unit.
0000006347.BOOK 39 ページ 2021年7月13日 火曜日 午前9時52分
41. MEES21K075
PEFY-M-VMA(L)-A
40
9. OPTIONAL PARTS Ceiling concealed (Medium static pressure type)
Control
box
Air
outlet
Air
inlet
Plasma
quad
connect
2×D-ø2.9
2×1-ø2.9
Air
Filter
Air
Filter
PQ
Box
WIDE
A
B
C
D
E
700
850
658
7
600
900
1050
858
9
800
1100
1250
1058
11
1000
1400
1550
1358
14
1300
1600
1750
1558
16
1500
Top
Top
Bottom
view
Piping
side
view
Inlet
air
side
view
Front
Back
250
C(Duct) 21
100
A
B
32
700
29
100×(D-1)=E
10
100
911
153
26 20 208(Duct)
104
10
PEFY-P20, 25, 32, 40, 50, 63, 71, 80, 100, 125, 140VMA(L)-A
with PQ box and Plasma Quad Connect
Unit: mm
Model WIDE A B C D E Model WIDE A B C D E
PEFY-P20,25,32VMA(L)-A 700 850 658 7 600 PEFY-P100,125VMA(L)-A 1400 1550 1358 14 1300
PEFY-P40,50VMA(L)-A 900 1050 858 9 800 PEFY-P140VMA(L)-A 1600 1750 1558 16 1500
PEFY-P63,71,80VMA(L)-A 1100 1250 1058 11 1000
The drawing above is a sample image of the optional parts being installed on a unit.
0000006347.BOOK 40 ページ 2021年7月13日 火曜日 午前9時52分