The Bean Trees Essay Questions

The Bean Trees Essay Questions
Intro: Refugees face a far worse life than most people can imagine, and there is no easy way out for
them. They first must get out of whatever dangerous place they are in, then travel long distances
with almost no resources, and even if they do make it safely to the USA there is a chance they will
be sent back or even put in jail. The refugee experience is defined by risks and belonging.
Topic: Refugees face an incredibly rough and hard life. Not only are they attempting to leave a
country that is incredibly dangerous and could get them killed at any time, but even if they survive
the journey there is a strong possibility that they will not be allowed into the US.
Context: The Bean Trees is a book about o group of people living in Arizona, two of which are
illegal refugees. Taylor and Mattie are two American citizens that are friend with Estevan and
Esperanza and ... Show more content on Helpwriting.net ...
It is proven that those who are educated about the refugee problem are far more likely to be willing
to accept refugees into the USA.
Topic: Even if a refugee does beat the odds and makes it to the USA alive and well, gets accepted
and is allowed to stay in the USA their problems are not nearly done. They are in new country, with
a different language and culture, with no job or money, and get judged and hated by alot of people
they meet.
Context: When Turtle, Lou Ann, Dwayne Ray, Taylor, Estevan, Esperanza Virgie, and Edna are all
eating dinner Virgi begins talking about how refugees should just stay where they are and not make
life harder for Americans.
Evidence: "Well, it's the truth. They ought to stay put in their own dirt, not come here taking up
jobs." (The Bean Trees)
Commentary 1: Refugees areal deadly facing an awful life and a tough screening process, but even
after it is all over their lives will still be far worse than ours. They will be disrespected and have
trouble socially fitting into this new
... Get more on HelpWriting.net ...

accountant Essay example
1. How comfortable are you working long hours to achieve success?
Working overtime or extra hours will not be a problem for me, because I used to work 10 hours per
day and to work overtime to finish some special tasks in my previous job. Sometimes, I spent my
personal time on resolving some potential risks and problems that I found.
2. How eager are you to keep on learning to stay ahead of the curve?
I am more than happy to learn in the work place because I value the process of continuous
improvement. As long as I was instructed to handle something new in my previous job, I felt excited
and satisfied. The double–loop learning process benefits me from applying new knowledge and
techniques to work–related areas and self–reflecting ... Show more content on Helpwriting.net ...
Working overtime or extra hours will not be a problem for me, because I used to work 10 hours per
day and to work overtime to finish some special tasks in my previous job. Sometimes, I spent my
personal time on resolving some potential risks and problems that I found.
11. How eager are you to keep on learning to stay ahead of the curve?
I am more than happy to learn in the work place because I value the process of continuous
improvement. As long as I was instructed to handle something new in my previous job, I felt excited
and satisfied. The double–loop learning process benefits me from applying new knowledge and
techniques to work–related areas and self–reflecting the aspects that I can improve. In addition, I am
actively pursuing academic success outside work place. For example, I am the youngest CMA
candidate in my CMA session.
12. Can you deal with the income volatility that you will be facing during the first few months?
I have no financial problem preventing me from accepting a job if the income is low at the
beginning. I worked as a no pay intern during the first two months in my previous job. Since I am
still young, I never put salary as the top priority in searching for a job. The thing I concern more is
whether this job can help me to develop my competitive edge or not.
Working overtime or extra

Examples Of Interview Questions About Juveniles
Interviewer: So, like I said, it's just to get your feedback on that. The first question is, do you
remember using it? Interviewee: Yes. Interviewer: What do you remember about it, if anything?
Interviewee: Just calling and one of the instances I remember calling on was a juvenile who had
taken her mother's vehicle without permission. We ended up finding the vehicle and the female who
was driving it, was reported to possible have the vehicle and so I called the juvenile center to see if
they would accept her. I remember distinctly, there was a conflict, initially they told me they
wouldn't, and then when I was talking back to the mother, the mother didn't want to take her at the
time. She was obviously upset, so I called them back ... Show more content on Helpwriting.net ...
Interviewee: We do, usually during the summertime we do a lot, but since school has started again.
It's not very often, especially due to working late at night, but during the daytime, we would run into
juveniles a lot whether it was at shoplifting or at the schools and everything like that. Interviewer: If
you were to sit down with the Chief and he said, overall, what do you think of this and should be
pursue it or not? Interviewee: I think, in the bigger scheme of things, I think it's a good program and
its good because at the same time, I totally completely understand that we can't take every single
juvenile to the juvenile center because it would be overrun. Especially, some of the kids that will
shoplift or do something pretty minor and they are first time offenders and that it and they never do
it again. I just don't think it's appropriate to take every single kid to the center. I think it is good to
call and then they say, sorry can you just release them to a parent or guardian. A lot of time the kids
don't even do it again after we talk to them and they realize that they don't want to go to juvenile
center and they learned that time, so I think it's a good

Operations Management
OPERATIONS MANAGEMENT
Select two organisations that you are familiar with – one with a service output and one with a
product output, and compare and contrast these organisations with respect to the following aspects:
1.1 The process of transformation of inputs to outputs 1.2 Process and Capacity design 1.3 Supply
Chain management 1.4 Scheduling
Operations Management refers to the management of the production system that transforms inputs
into finished goods and services, (http://csuponoma.edu/weber). Net MBA Business Knowledge
Centre adds on to say that an operation is composed of processes designed to add value by
transforming inputs into useful outputs. Jay Heizer and Barry Render define operations management
as a set ... Show more content on Helpwriting.net ...
Inputs Transformation Process Output .Malambe fruit .Mixing Malambe fruit with water .Malambe
.Labour .removing Malambe fruit seeds through sieving juice.
.Water .adding sugar to the liquid Malambe
.Sugar .Bottling
.Sieve
.Bottles
MALSWITCH's internet is fast, reliable and secure. MALSWITCH strives to provide the best
service so as to meet their customers' expectations. MALSWITCH achieves this by recruiting the
best personnel and training them to keep up with technology. MALSWITCH designs and tests its
service before rolling it out to analyze if it meets the requirements of its customers. MALSWITCH's
after sale support service is quick.
MALSWITCH uses the following as its inputs; skilled labour in the form of engineers and technical
marketers. The other input is equipment like towers, electrical power, servers, cables, transmission
equipment, switches, routers and server applications. The transformation process includes asking
customers what they want, designing network, testing the network, installing network, connecting
transmission equipment through cables, micro wave wireless channels to central internet server and
all

A Juvenile Justice Case
After carefully reviewed all the facts, evidences and interviews of those associated in John's case, as
a judge, I would handle the case in a non–judicial way, require John to make restitution to the store
in a form of community service and order his parents to cooperate in the treatment program. In case
of John's parents are unwilling to cooperate in the treatment programs, under the Parens Patriae
concept, I would have to put him on probation in order to help deter John from committing crime in
a future. In this report I will explain the reasons why.
First, John is not considered delinquent because this was his first offense and based on his
statements, it seemed to me that John wasn't aware of the consequences that would follow his
actions and furthermore, John simply had a mindset that his action was normal and that his friends
did it all the time. This would place John under the Social Process Theories. The explanation of
Social Process Theories according to the textbook, (Clemens F. B, Stuart J, 2011, p.70) "Social
process theories examine the interactions between people and their environment that influence
individuals to become involved in criminal or delinquent behaviors." John's behaviors were the
result of bad influences and that he has learned that stealing was acceptable as many of his friends
did it.
Secondly, I would considered John as a victim himself because after reviewing the interview given
from his mother; Joann, John would fall under the category of a

Mba 540 Chapter 2 Case Study Essay
Chapter 2 Case Assignment
Raymond Gonzalez
Saint Leo University
What are the potential sources of the problem?
The source of these problems seems to be coming from two areas in Interwest Healthcare. The first
area is the miscommunication that the hospital administrators are having with upper management.
The hospital administrators and upper management are not only having miscommunication issues
but they also do not share the same role expectations with each other which is creating tension. "The
hospital people accused Singh of being a bureaucrat who did not care about patient services. Singh
accused the hospital staffs of not understanding the importance of accurate reporting" (Brickley,
Smith & Zimmerman 2009 p. 38). The ... Show more content on Helpwriting.net ...
But before any changes to the data entry process are made it is important to communicate directly to
the hospital administrators. It is important to have the hospital administrators on board with the
changes that will be made with the data entry process. By gaining the hospital administrators
consent with the changes this will allow a smoother transition for the data entry change and it could
provide a positive change to the workplace. As for the changes to the data entry it would most likely
be a simple computer process along with small piece of paperwork. It would be best to have some
sort or paper record on file that would need to be alphabetized along with a simple computer
program. The computer program would help ensure accuracy and would have the patient's data
record on file which will be easy to locate. There would be very little paper work for the process
mainly because it takes up space and takes more time to record. The paper work that is part of the
process would simply serve as a backup if the computers were down. The key to ensuring accuracy
with the data entry is to make the process as simple as possible so it would minimize the errors.
How does your view of behavior affect how you might address the consulting assignment?
As a consulting assignment I see Interwest Healthcare as a company in distress due to the way the
hospital

Nt1330 Unit 2 Reaction Paper
In order to let Syringe inject the target process, we create a remote thread in the process, and then
the thread loads Serum into itself. Because of the Windows design, we cannot control an existing
thread of a process, but we can create a thread in a certain process to do a specific task. We use
CreateRemoteThread() [30] to create a thread in the certain process we want to hook. The thread
calls the LoadLibraryA() [31] function that loads Serum, so that the process does whatever we want
it to do in Serum.
Windows Sockets 2 (Winsock) enables programmers to develop a socket program. The Ws2_32.dll
in Windows includes functions for users to handle windows sockets, like create a connection, or
send and receive packets.
Serum changes the entry points of the functions of Ws2_32.dll file. We modify the entry points of
the functions we want to hook for jumping to our own hack functions and then jumping back to the
... Show more content on Helpwriting.net ...
We need to increase the number of count so that we can send many connections out at the same
time. Every count can own their unique ID attaching to each connection, so that they cannot be
confused.
We hook the functions of Winsock now. In order to achieve a more comprehensive protection on the
victim–side, we will hook the functions of Kernel, like CreateFileA(), WriteFile(), and others that
attackers want to use to do some malicious to restrict what attackers can do.
Until now there are still many botnets want to spread themselves. The attacker can launch
Distributed Denial of Service (DDoS) through a massive botnet. Honeypot is one of the most
efficient tools for detecting a botnet at the present time, but honeypot had been easily detected by
botnet [24][25] before. Since we find a way to fix the problem now, we can focus on defending
botnet in the future. We want to use DEH to find the C&C server that has not been found and
destroy

Decision Making Model Essay
Decision Making Model
Abstract
Decision making models can be very effective in problem solving. Scheduling is a big problem at
Direct HomeHealth Care and a solution needed to be found. Scheduling software which can be very
expensive was the only conclusion that could be reached. With much thought and analysis a
resolution was reached with critical thought and a decision making model from the Small Business
Development Center.
Decision making models can be very helpful in analyzing a problem and setting up a step by step
process to evaluate and come to a favorable conclusion. Recently there has been a problem at my
agency with scheduling and the difficulty the on call schedulers have with toting around several very
large ... Show more content on Helpwriting.net ...
A new solution needed to be reached to schedule patients more efficiently.
The next step would be to analyze the situation and identify key uncertainties. After thinking this
problem through there was a realization that a computer program was the way to go. Computer
programs can be very expensive, some around thirty thousand dollars. This would be a very large
expense and I am not sure Direct HomeHealth Care is ready to spend that kind of money. A new
computer program would also mean schedulers need to be trained and that could be very time–
consuming. If the schedulers were not computer literate it could become very complicated. Despite
the drawbacks such as expense and training this was the only workable solution. This would
eliminate the heavy books and also allow for more precise and efficient patient scheduling.
Gathering data is the next step in the model and several software companies were consulted. All of
the companies had excellent products with very impressive features. The scheduling software not
only scheduled patients but it also kept track of payroll and billing. Payroll and billing are both very
important departments of Direct HomeHealth Care and the process to fulfill each task weekly is
monstrous. If the software could help to alleviate these two jobs it would be a great benefit. After
speaking with representatives from a number of companies an affordable solution was found

A Brief Note On The Primary Function Of Exec
Lab 2
CSNB324
Muath Abdullah SN091649
Answer Q1:
Execv(): it is a prototype of exec family, v is added to indicate the type of argument which in this
case specified as a vector (array of character pointers). The primary function of exec () system call is
to execute a file or a program. This is done by creating a new process image from a regular,
executable file.
This file is either an interpreter script or an executable file object. It has the form execv(char *path,
char *argv[], char *envp[]). The path argument is the pathname of a file that contains the new
program to be executed. The argv array is a list of parameter strings, and the envp array is a list of
environment variable strings and values that should be used when the process begins executing the
new programs. When a process encounters the execve() system call, the next instruction it executes
will be the one at the entry point of the new executable file.
Execvp()
The created child process does not have to run the same program as the parent process does. The
exec type system calls allow a process to run any program files, which include a binary executable
or a shell script. On this page, we only discuss one such system call: execvp(). The execvp() system
call requires two arguments: 1. The first argument is a character string that contains the name of a
file to be executed.
2. The second argument is a pointer to an array of character strings. More precisely, its type is char
**, which is exactly identical to the

The Early Intervention Readiness Program (EIRP)
After knowing of the diagnosis parents go through a process of denial and uncertainty that leads to
high level of distress after knowing of the diagnosis .These feelings increments as they realized how
limited is their knowledge of their child's condition. Among the issues that parents encounter is
understanding the disorder, with so much information at hand is difficult to choose which
information is reliable. Lack of access to appropriate information, both early on and as the child
ages, is a significant barrier to adjustment for families with a child with ASD (Mitchell &
Sloper,2002; Russa, Matthews, & Owen–DeSchryver, 2014; Turnbull, Turnbull, Erwin, & Soodak,
2006). Reaching out for professional assistance allows for them to get access ... Show more content
on Helpwriting.net ...
The mission statement of the organization is to establish a partnership between parents that share
similar situations. Counselors, who are parents of children with autism or other behavior disorders,
are referred to another parent in need of guidance or information regarding interventions, resources.
Though, there are testimonies that confirm the effectiveness

My Thoughts On Type Of Training Essay
I would like to formally write this letter to express my thoughts on the type of training I have
experienced while starting this position. I appreciate everything you have done for me so far and
though there were great qualities to this training program, I believe that there are many areas that
could be improved upon as well. I know that you have put ample time into a training manual to
make sure that new employees are learning everything they should. The purpose of this letter is
solely to give you input from the other side of the training manual. There may be things that you
may not have realized and I personally think this would be beneficial to your employees or
prospects. You may have noticed that after the initial training period, I still had plenty of questions
that were not addressed during the training session.
I would like to start this letter with the great aspects of this training program. I really appreciated
that you have cleared your schedule for 2 days to explain to me the process of my job. My first
impression was when you had pulled out a list of topics that you would like to discuss over. It seems
very organized and well thought out. The list of topics hit every important task that I am going to
have to do along with the programs needed in order for me to do my job correctly. Not only was this
list informal, but it also allowed for you to check off the topics that we have already addressed.
Another part of the training process that I thought

Heat And Mechanical Work In Engine. . . Victor.F. Mavika.
Heat and Mechanical work in Engine
Victor.F. Mavika
Dr. Elena Gregg
Thermodynamics
EGR 231
Introduction
The first law of thermodynamics is a state for principle of conservation of energy. In most cases, any
process that does not obey it never happens. However, there different processes that do not violet it
but never occur in nature. First law of thermodynamics fails to answer some important questions.
i. It is known that first law cannot indicate direction of heat transfer. Heat flows from hot body to a
cold body and never the reverse. If the reverse process occurs energy would still be conserved, yet
first law does not explain this phenomenon. ii. First law does not tell why heat energy cannot be
converted ... Show more content on Helpwriting.net ...
A simple engine consists of a cylinder containing gas which is fitted with frictionless movable
piston. Since heat engine operates in cycle (Returns to original state after series of processes) there
is always work done which also implies continuous conversion of heat into work. To understand the
way heat engine works one need to understand the whole idea of Carnot cycle.
Carnot Cycle.
The cycle was first discussed by French scientist in 1824. His work explains that work could only be
done when heat flowed from higher temperature to a lower one. He proposed ideal engine that
operates cyclically and reversibly. This is the practical arrangement to convert heat into mechanical
work. Sade Carnot designed this ideal engine free from imperfectness of the actual heat engines.
Carnot engine consists of the cylinder, sink, working substance and insulating pad.
Cylinder is the main part of the Carnot engine with insulating walls and the conducting base; it is
fitted with frictionless piston which increases the efficiency of the engine. Source is the hot body
maintained at a very high temperature with infinite thermal capacity meaning any amount of heat
can be taken out without changing temperature of the source. Sink is the opposite of the source. It is
he body at a very low temperature which also has infinite thermal capacity. Working substance in
the cylinder is normally ideal gas that absorbs heat from the source, as heat is absorbed

The Operating System Linux
3. Linux
3.1 Introduction:
The operating system Linux is an open source version of UNIX [6]. In 1992 [8] Linus Torvalds, who
was a computer science student –at the University of Helsinki– [6], was the one who started this
operating system.
Linux is used on variety of hardware (e.g. on workstations, mid–and high–end servers and on
gadgets), which makes it unique [6]. Linux keeps maintaining its position in the market due to the
hard work of both employees and volunteers [6].
Previously, UNIX systems used batch jobs, which run a process until it is finished and then the next
process will run [8]. What UNIX used is known as "non–preemptive scheduling" [8]. After years,
preemptive scheduling was used to run processes in parallel by switching between them [8].
3.2 Scheduling Technique: Linux scheduler is based on Time–Sharing Scheduling technique [7],
which means "It can effectively schedule tasks that have strict timing requirements". The CPU is
divided into small sections, which allows many process to run simultaneously [7]. Time–sharing
depends on "timer interrupts" [7].
3.2 Scheduling Priorities:
The priority ranges differ for real– time tasks and normal tasks in Linux scheduler [1]. In real–time
tasks: priorities vary from 0 to 99. In normal tasks: processes' priorities range from 100 to 139.
Processes who have higher priorities are "numerically" lower than others [1].
Normal tasks are appointed priorities "based on their nice

Formula Booklet Physics 11th
Call 1600–111–533 (toll–free) for info.
Formula Booklet – Physics XI
Dear students Most students tend to take it easy after the board examinations of Class X. The
summer vacations immediately after Class X are a great opportunity for the students to race ahead of
other students in the competitive world of IITJEE, where less than 2% students get selected every
year for the prestigious institutes. Some students get governed completely by the emphasis laid by
the teachers of the school in which they are studying. Since, the objective of the teachers in the
schools rarely is to equip the student with the techniques reqired to crack IITJEE, most of the
students tend to take it easy in Class XI. Class XI does not even have the pressure of ... Show more
content on Helpwriting.net ...
Ph: 55270275, 55278916 E–16/289, Sector 8, Rohini, Delhi – 85, Ph: 55395439, 30911585
4
Call 1600–111–533 (toll–free) for info.
(1)
Formula Booklet – Physics XI
(a) (b) (c)
F12 = − F12 m F = F21 M+m F Acceleration: a = M+m
→
→
M (2) m F21 Fig. 1
F FR 2 = ; m I = mG g GM
→ →
Contact force: F12 =

F12
F
(xvi) Inertial mass: mI = F/a (xvii) Gravitational mass: mG =
→
(xviii) Non inertial frame: If a 0 be the acceleration of frame, then pseudo force F = − m a 0
Example:

Methods For Creating A Program
As the focus and scope of the project evolved, so did the methods used to find a solution to the
scheduling problem. The approach to creating a program had several stages, including a method to
define several distinct weeklong schedules to combine, a method taking into account non–
standardized class schedules, and a method combining consistent schedules with additional
constraints. These approaches were each based on the current understanding of the scope and
requirements of the project. In the first stage of the project, the focus was on creating several week
long schedule blocks, composed of mixed shift lengths, that could be combined together over the
entire year to achieve a schedule complying with the ACGME. These schedule blocks would be
grouped by their intended use, such as which day a clinic session was on, day shifts or night shifts,
specific educational blocks like the GPC, and split between first and second/third year residents.
This schedule would be implemented on top of previously assigned educational units and clinic
sessions, and optimized for the correct number of residents during each hour of the day. Figure 3A
demonstrates the schedule blocks, showing the hours assigned by each block over the course of a
Wednesday. This method also included an implementation of the previously defined linear program,
allowing scheduling blocks to be efficiently created for each of the situations required by the
method. As more information was gathered, it became clear

Advantages Of Retention Strategies
Gone is the age when people sought permanence in every vital facet of life, be it relationships or
jobs. With the advent of modern era, there has been a tangible shift from securing permanent things
to ascertaining better things. It is a typical human behaviour to have an insatiable hunger for
development and betterment. This penchant can be evidently contemplated in the corporate
employees, since the corporate world is swamped with a surfeit of jobs and there are ample chances
for employees to move from one job to another. In such transient job environment, companies need
to prepare themselves well in advance to efficiently and professionally handle the exit of employees.
Various organisations keep strengthening their retention strategies, ... Show more content on
Helpwriting.net ...
If you feel that the issues of your employee can be resolved and the employee is worth solving those
issues, you shall go to that extra mile to retain him. Finding a counterpart, one step ahead of the
existing employee is undoubtedly a hectic and expensive affair. In most cases, a hike or substantial
hike might lure the employee back into the job. When offering such benefits, make sure that the
employee will stay for long and your relationship will other employees doesn't decrepitude. Albeit,
if the concerns of the employee are inscrutable, it's in the best interest of everyone to support him in
his decision and bid him a dignified adieu.
Establish a well laid–out resignation process: The employee rulebook/ handbook shall clearly
mention the formal procedure for employee resignation. The same shall be patently explained in
employee orientation sessions. The employee shall be liable to submit a formal resignation letter to
one's immediate supervisor and an attested copy of that shall be forwarded to human resources
department for removing the employee from payroll inventory and completing all other formal
procedures as

Chapter 5 Of The Windows Internals Textbook
Windows Internals, Part 1, 6th ed, Chapter 5 Chapter 5 of the Windows Internals textbook written
by Mark Russinovich, David Solomon and Alex Ionescu covers Windows processes, threads, and
jobs. This chapter goes over how processes are managed, describes the kernel mode and user mode,
and process blocks. One of the topics I am covering for my final is the similarities and differences
between processes and threads in Windows and FreeBSD so this source will help provide
information about the properties of threads, processes and jobs in Windows and how they are
managed. Windows Internals, Part 2, 6th ed, Chapter 8 Chapter 8 of the Windows Internals textbook
written by Mark Russinovich, David Solomon and Alex Ionescu covers the Windows I/O system.
This chapter goes over device drivers, I/O system components and features, and Plug and Play. One
of the topics I am covering for my final is the similarities and differences between the Windows and
FreeBSD I/O system so this chapter will assist me in explaining how the I/O system in Windows
operates and unique factors that Windows has when it comes to I/O. Windows Internals, Part 2, 6th
ed, Chapter 10 Chapter 10 of the Windows Internals textbook written by Mark Russinovich, David
Solomon and Alex Ionescu covers Windows memory management. This chapter goes over virtual
address space, copy–on–page writing, and paging. One of the topics I am covering for my final is
the similarities and differences between memory management in Windows

Summary. Maintenance Decision Is Typically Made Based On
SUMMARY
Maintenance decision is typically made based on tool condition change/degradation. However, the
change does not necessarily lead to poor quality of the product. Change–based maintenance decision
making may lead to over–maintenance. This report focuses on develop prognosis for maintenance
scheduling model. We first study current maintenance situation in Samsung semiconductor system,
follow by that, generating data to illustrate the decision making process according to a potential
optimization model that accommodates with productivity and preventive maintenance task
scheduling in the report.
Preventive Maintenance case study of Samsung semiconductor
To develop a maintenance approach, it is essential to know the specific process ... Show more
Except these tools, normal PMs are based on CBM strategy. Although it is very important to
determine how often PM should be done, the decision making process for PM cycle is still rely on
engineering experience. As shown in figure 1, the decision flow of PM cycle for the tool has two
phases, and are connected by extension test. Phase I is determined by the supplier with their
guaranteed PM cycle. Once the guaranteed is expired, extension test will be applied to the stabilized
tool, and followed by a successful extension test, the PM cycle will go to Phase II period. Figure 1 –
Decision flow of PM cycle in different period
PM Cycle Extension Test
When the tool is brought–in for the first time, the supplier will suggest a determined PM cycle. Each
tool will have one to three year's warranty, which is offered by that supplier. After that, the PM cycle
will be re–determined according to the cleaning, repair and replacement cycle of the parts that are
conducting to the tool. For the stabilized tool, its period is extended by using the evaluation test of
PM cycle extension.
The evaluation test for extension is an engineering determination process, in which case that
engineers will try to extend the PM cycle longer than present by experiment. For example, in the
TBM case, for a monthly PM routine tool, the engineer will extent it's PM cycle to bi–monthly for
one certain tool. If no

Metro Social Services Case Study
The mission is to "Preach the gospel of Jesus Christ and meet human needs in his name without
discrimination." The clientele ranges between families, single men, and single women. In which the
temporary housing facility has separate areas for each. Their mission is to help these individuals as
well as families to get stable and on their feet within two years. Through there transitional housing
program there is a process you have to go through which is first being on the waiting list with Metro
Social Services. From here is where you will have to go through the screening process. Which is
first the application process. Once that is done you come in for a meeting to just get a brief overview
of the client. After they have been approved before ... Show more content on Helpwriting.net ...
This program is at the youth center and it allows the children free lessons. The children can get free
lessons in any instrument that is available for example: guitar, bass guitar, drums, piano, etc. They
are allowed to find a song that they enjoy, give it to the instructor, the instructor learns the song and
then comes back to teach them. They also have a recording studio which allows them to be able to
record their songs. Also they have a performance and perform at gigs to show what they have
learned. Another great opportunity that they are given is to be able to travel overseas but only if their
grades have remained high and they are invested into the music

The Bio Ecological Theory Created By Bronfenbrenner
Throughout the world there are many homeless individuals who are in need of help. Many of these
people have trouble finding a job or a way to help themselves get stable. Not a lot of the homeless
know how to handle money or illnesses they have developed. Many homeless also suffer from
addictions and are in need of rehabilitation programs. The cause of these illnesses or drug problems
can be related to the fact that when growing up they suffered from different life changes and
expectations within the bio ecological theory or context. For my Service Learning Project I have
implemented a project that I believe will help the homeless community with their second chance. As
we grow up we associate ourselves with different people and environments no matter how old we
are or get we still see different people and different environments. The bio ecological theory created
by Bronfenbrenner, which explains just that with contexts of development. With the contexts of
development there are the biological, immediate, socioeconomic, and cultural contexts. All of these
contexts play a role in whether or not your life heads in a good or bad path. In every context there is
a different association from people and the environment such as cultural context which can provide
the belief in society that education is important.(Boyd, 2015) However, the belief that education is
important can be downgraded in the socioeconomic context if a family does not have the ability to
send their child to a

Essay on BUSI650 B05 DB1 Thread RCherry
Discussion Board 1
Ryan Cherry
BUSI 650 – Operations Management
January 18, 2015
Key Concept Explanation The concept of a "job shop" as a transformation system, refers to a
process which has a somewhat jumbled flow, high flexibility, and outputs which are processed
differently (Lyons, Vidamour, Jain, & Sutherland, 2013). One of the most important aspects of the
job shop which must be understood relates to the definition presented above. Managing a job shop is
difficult because of the numerous different routes that an output might take, the numerous different
inputs which are required, and the differing operations and amounts of time (Meredith & Shafer,
2013). "[S]ince every output must be treated differently", efficiently ... Show more content on
Helpwriting.net ...
1348).
Biblical Integration When considering the purpose of instituting the appropriate transformation
system is to achieve the maximum "efficiency, effectiveness, volume, capacity, lead time, flexibility,
and so on", there are a few Bible verses which almost immediately spring to mind (Meredith &
Shafer, 2013, p. 50). The appropriate transformation system seeks to improve the work of our hands,
allowing us to "work heartily, as for the Lord and not for men" (Col. 3:23, English Standard
Version). The improved work of our hands will also allow our souls to be richly rewarded and allow
our diligent hands to rule (Prov. 13:4, 12:24, ESV). Before making any decision, however, the
manager should seek to commit his work to the Lord, so that his "plans will be established" (Prov.
16:3).
Application
Real–world businesses with customers which require product flexibility, in lower volumes, have the
beginnings of a job shop production process (Choudhari, Adil, & Ananthakumar, 2012). Such a
beginning is further evidenced when the job force is made up of highly skilled employees that are
able to help create a wide array of products (Pederson, Dresdow, & Benson, 2013). The job shop
process is also very widely used because of its many advantages, and despite the scheduling
challenges which it presents (Meredith & Shafer, 2013). Organizations

Bedroom Observation
The first table that I visited is Massmutual. I selected this table because the lady that was sitting
there seemed so nice and the least intimidating. MassMutual is a life insurance company. The offer
plans including life insurance, protection products, retirement and investment services to help
people meet their financial goal. The biggest learning lesson that I got when I visited that table is
that it is essential to go to these career fairs. The lady that was at the table and I had such a good
conversation. We spent a good 20 minutes talking about flagstaff, our hobbies, and I even found out
that we graduated from the same high school. After we finished our conversation she asked me if I
had a resume with me and I said no so she actually

Innovation In Child Care Essay
This research expects to identify a process of innovation suitable for individuals in a community
context. In this process, this study will examine various psychological and social issues having
profound influences on people to be innovative. However, an issue related to the understanding of
the meaning of innovation won't be overlooked, which remains vague and ambiguous. The latter
will help to gain philosophical insights of the concept, and will contribute to developing a
generalized definition of innovation. The former will enhance individuals' dexterity in the process of
achieving innovation.
The concept of innovation originates in Greece during the fifth century BC with a pejorative
meaning (Godin, B., 2012, working paper no.12). In contrast, ... Show more content on
Helpwriting.net ...
However, the process of innovation is closely linked to the understanding of innovation – whether it
is an act of bringing changes or consequence of an action which represents changes. It is easily
understandable that any particular action does not ensure the same outcome but may bring changes,
and all changes are not considered innovation. So, it is imperative to develop a clear understanding
of the concept for proposing a generalized process of innovation.
The contextual focus of this study will contribute to bringing innovation in child care services by
assisting child care workers to be innovative, which will reduce the gap between the services offered
by child care workers and the services expected by other stakeholder groups.
Academically, this study will contribute to resolving a century–old puzzle associated with the
research on innovation. An adequate and generalized understanding of innovation and the process of
innovation appears eminent for satisfying the epistemological, ontological and methodological
inquiries associated with the research on

Crossfit Kid Speech
Thank you for allowing your child to be a part of the Crossfit Kids Class! I am excited you have
chosen Crossfit Kids to be a part of that path as Crossfit has changed all of our lives for the better.
We could not only enhance your child's life, shape his or her future. Thank you for allowing me to
be a part of this.
My name is Mitchell Nims. I graduated from Upper Iowa University with a Physical
Education/Health degree and graduated MorningSide University with a Level 1 Special Education
endorsement. I currently am a Special Education teacher and a Physical Education Teacher at
Marshalltown Learning Academy. I am married to my beautiful wife Lindsey and have two kids:
Riglee, age 3, and Cannon, age 1 (soon to be 2). I started Crossfit in 2013

Decision Support Tool For Dynamic Job Shop Scheduling
DECISION SUPPORT TOOL FOR DYNAMIC JOB SHOP SCHEDULING ATIKAH BINTI
SELAMAT (FA12015)
SUPERVISOR: DR. MUCHAMAD OKTAVIANDARI
TABLE OF CONTENTS PAGES
CHAPTER 1 INTRODUCTION
1.1 Background
1.2 Problem Statement
1.3 Objectives
1.4 Scope of Research
2
3
3
3
CHAPTER 2 LITERATURE REVIEW
2.1 Introduction
2.1.1 Job Shop Production
2.1.2 Job Shop Scheduling Problem (JSSP)
2.1.3 Dynamic Job Shop Scheduling Problem (DJJSP)
2.2 Previous Research on Job Shop Scheduling
2.2.1 Job Shop Scheduling
2.2.2 Approach and Method
2.2.3 Performance Measures
2.2.4 Problem Size
2.2.5 Simulation Tools
2.2.6 Simulation Results
2.3 Company Background
4
4
4
5
6
6
6

7
8
9
9
10
CHAPTER 3 METHODOLOGY
3.1 Research Methodology Flowchart
3.2 Data Collection
3.2.1 Tools and Equipment for Data Collection
3.2.2 Job Data
3.3 Assumptions made in the research
3.4 Optimizing the scheduling
11
13
13
13
14
14 GANTT CHART
REFERENCES
15
16
CHAPTER 1
INTRODUCTION
1.1 Background
Scheduling is an important tool in manufacturing and engineering, where it can have a major impact
on the productivity of a process (Min et al., 2009). In real production floor, scheduling is a
continuously reactive process which face suddenly or unexpected any new events. In manufacturing,
the production mostly relate to the processing time, costs and quality. Scheduling plays important
role in raising the efficiency of any production system.
Nowadays, many approaches have been developed to resolve the real time events problem.

Essay about What I Learned in MGT 422
What I learn in MGT 422: Production Management this semester is some useful information that
will greatly benefit in the future. There were several topics we covered this semester but there were
only a selected few that caught my attention. Those four things I learned this semester that caught
my attention were: the productivity theory, the slowest worker theory, the assign and on–duty
approach, and the process of making a prosthetic body part.
First, the productivity theory is where the output of a company is divided by the input to determine
if the company will have a negative or possible percentage of productivity. For example, if a
company has an output of 275000 and an input of 210000; the company will have a 1.19 percent of
... Show more content on Helpwriting.net ...
For example: if the manager will like 4 employees to come in at 7 a.m., 8 employees at 8 a.m., 12
employees at 9 a.m., and 20 employees at 10 a.m.; the manager will assigned 4 employees at 7 a.m.,
4 employees at 8 a.m., 4 employees at 9 a.m., and 8 employees at 10 a.m.. After management
completed assigning employees to a particular hour, they will have to determine how employees are
on–duty at those hours. There will be 4 employees on–duty at 7 a.m., 8 employees on–duty at 8
a.m., 12 employees on–duty at 9 a.m., and 20 employees on–duty at 10 a.m. This process is helpful
to managers because they can determine what approach they should use to make sure they have the
required number of employees for each hour. I was very intrigued with the assigned and on–duty
approach because it will be a strategy I will have to use in the future in my business operation.
Finally, the process of making a prosthetic body part was a very insight learning objective. I learned
there are two types of prosthetic: AK and BK. AK prosthetic is where a person loses their bottom
part of their leg below the knee cap, and a BK prosthetic is where a person loses their entire leg.
During our trip the Prosthetic Service, we had the privilege to meet a person who was an AK
prosthetic and a person who was a BK prosthetic. The BK prosthetic was an individual who enjoyed
hunting and fishing so he

Personal Reflection Sample
I became a Guardian ad Litem (GAL) volunteer in May of 2015. As such, I had the opportunity to
observe the interview process of two potential adoptive families. The interview team consisted of
seven employees of the Catawba County Department of Social Services, which included social
workers, supervisors, and managers. A GAL program supervisor was also present, as well as a child
therapist. This experience left me with a deep respect for the careful and thorough evaluation
demonstrated by the interview team members. It is a tremendous responsibility to secure the best
permanent placement home for children in foster care. The interview team assessed the strengths
and needs of the children and the potential adoptive parents. Reflection on my ability to think
critically and evaluate information, while taking into account my personal values and biases, led me
to the conclusions that I have much more to learn.
I expect that the Social Work Research Methods I class will be challenging. My personal abilities
will be tested, stretched and improved. It will require hard work and perseverance. While I am
determined to succeed, I expect I might find myself intimidated and overwhelmed at times. I may
get discouraged and disappointed, but I look forward to the satisfaction of having learned much by
the end of the semester. By the end of ... Show more content on Helpwriting.net ...
Evidence–based research in the profession of social work lends credibility and validity to the
profession and provides reassurance to the public. Evidence–based research provides the foundation
on which the social work profession stands. Through the process of determining the best treatment
and intervention to use, the social work practitioner can be confident that they based their decision
on meaningful, evidence–based

What Is Hardware Abstraction Layerss In The Operating...
a program were to be created, the programmer would have to know exactly how each piece of
hardware interacted and communicated with the system itself. Due to this, software development
was significantly more difficult than it is today. Through the use of hardware abstraction layers in
the modern day however, programmers don't require all of this information due to their programs
being compatible with any device. Hardware abstraction layers (HAL) allow the operating system to
interact with hardware elements of the machine that said operating system is running on; and it does
this in an abstract way as opposed to a more detailed hardware level. The main purpose of the HAL
is to hide the differences in pieces of hardware from the operating ... Show more content on
Helpwriting.net ...
The Windows NT family of operating systems utilises a HAL directly from the kernel of the system,
in the kernel space between hardware and executive services in the file NTOSKRL.EXE. Using this
HAL, kernel–mode code is made much more portable despite having different memory management
architectures, and different I/O bus architectures. Resource management in an operating systems
environment is the controlled allocation and de–allocation of system resources, for example;
processor cores, memory pages, bandwidth and many others. These resources tend to be shared by
various programs running on the machine which require them in order for the program itself to run
accurately, and also to ensure that the machine can allocate just enough resources so that everything
can run smoothly. Two methods of multiplexing (sharing) these resources; time multiplexing, and
space multiplexing. Using a computer which has several users, means that the importance and needs
of managing and protecting resources such as memory, and processing cores are even greater than
otherwise. This is because users would have to share files with each other which could potentially
end in disaster for end user. Multiplexing (sharing) of resources in the operating system is done in
two different ways, these are; time multiplexing, and space multiplexing. When time multiplexing a
resource, it involves the resources have different programs take turns in using them. So instead of
one resource being dedicated

Nt1310 Unit 3 Study Guide
Answer for Question No.2:. Write a Producer–Consumer program using Java threads or Pthreads in
C/C++.
package OSHw3;
public class ProdCons { int item; boolean busy; ProdCons(){ item = 0; busy = false; } synchronized
void putItem(int item1){ if (busy){ try { wait(); }catch(Exception e){ System.out.println("Producer
Interrupted");} } busy = true; item = item1; System.out.println("Produced : " + item); notify(); }
synchronized int getItem(){ if (!busy){ try{ wait(); }catch(Exception e){
System.out.println("Producer Interrupted");} ... Show more content on Helpwriting.net ...
But in a multiprocessor environment if a process disables the interrupts on its CPU, the interrupts
are not disabled on others CPUs. The processes of other CPU can enter the same critical region.
"Busy Waiting" is effective both in uniprocessor and multiprocessor systems. There are other atomic
operations available as well to implement mutual exclusion.
Answer for Question No.4: In the design of the readers–writers problem using a monitor, why is it
advisable to keep the protected resource external to the monitor?
As it is required that only one writer should be inside the monitor to achieve data consistency. If the
shared memory (protected resource) is kept inside the monitor then at any point of time either only
one writer or reader can be inside monitor. But multiple reader should be able to read the data at the
same time for efficiency of the system. If the shared memory is inside the monitor then multiple
readers cannot read the data at the same time.
Answer for Question No.5: How do serializers solve several deficiencies of monitors?
Serializers solve the several deficiencies of monitor in several ways as listed

Annotated Bibliography On Functions And Functions
#include #include #include #include #include #include int PID[100], CPU_time[100],
IO_time[100], arrival_time[100], flags[100],ID_ready[100]; int rQ[100], bQ[100]; int f_CPU = 0,
r_CPU = 0, f_IO = 0, r_IO = 0; // a function that dequeue an element from a queue int deque(int
state, int N, int ID) { int temp, var, i, index; if (state == 0) { //deque from ready_queue var =
rQ[f_CPU]; rQ[f_CPU] = –1; f_CPU++; if (f_CPU == N) f_CPU = 0; } if (state == 1) { //deque
from blocked_queue for (i = 0; i < N; i++) { //search for ID in the blocked queue if (bQ[i] == ID) {
index = i; break; } } if (bQ[f_IO] != ID) { //sort the elements of the blocked_queue to deque from
the place pointed by f_IO temp = bQ[f_IO]; bQ[f_IO] = ID; bQ[index] = temp; } var = bQ[f_IO];
bQ[f_IO] = –1; f_IO++; if (f_IO == N) //check if end of queue reached f_IO = 0; flags[ID] = 0; }
return var; } // a function that enqueue an element in a queue void enque(int _id, int state, int N) { if
(state == 0) { //enque in ready_queue rQ[r_CPU] = _id; r_CPU++; if (r_CPU == N) r_CPU = 0; }
else { //enque in blocked_queue bQ[r_IO] = _id; r_IO++; if (r_IO == N) r_IO = 0; flags[_id] = 1; }
} // a function for first come first served algorithm void FCFS(int N) { int n, m, k, p, j, ID, time = 0,
temp, counter = –1, run_flag = 0, finish_counter = 0; int turnaround_time[N], data[N]; float
run_count = 0; FILE *output = fopen("FCFS.out",

O35 Induction
O35 Manage induction in health and social care or children and young people's settings
1.1
Explain why induction is important for practitioners, individual and settings.
Induction process is very valuable and of great importance for any early year practitioner, individual
or organization. In my opinion this is an ongoing process starting from the advertisement.
a) For practitioners:
The process of Induction is important for the Early birds in the nest so as to help them integrate into
their roles in the organization quickly and effectively. They should be familiarized with the campus
first. Like cafeteria, restrooms, classrooms, emergency exits etc. After that introduction with her
new colleagues, rules and regulations, benefits and ... Show more content on Helpwriting.net ...
The leader is responsible for selecting mentors for the induction process from the staff depending
upon the requirements of the induction process. The mentors should have the skills, expertise and
knowledge to coordinate the induction effectively. The observations and notes taken from the
induction process states where the new staff is standing and now what skills and abilities should be
focused for further development.
Thus the progression should continue to give the new staff a chance to enhance their qualifications
and skill where they lack.
1.4
Analyze the role of the induction process in supporting others to understand the values, principles
and agreed ways of working within a work setting
The induction is a planned process which involves various members. The process of induction
depends upon how clear and effective your induction policy is. The policy clearly states the role of
each member involved in the induction process; and there is a checklist present for each phase. In
this way let a newbie join at the beginning of the session or in the mid of the session every newbie is
going to enjoy the induction process so that she understands all her duties and responsibilities
adhered to the job. This newbie will learn all the tricks of the trade going on in the organization
pretty well including the mission vision and what quality work is

Mitigating Financial Pain After A Job Loss Essay
Losing a job can be a devastating experience; it can cause a lot of emotional and financial problems.
The main consideration when you suffer a job loss is implementing strategies to diminish your
current financial set back, until you are able to get back on your feet. However, finding help
sometimes can be a daunting experience, but there are help available and we will discuss some of
your options.
Contact your local unemployment office to start the application process; this is the first step get a
handle on your situation. Another reason why it should be your first step, the Unemployment
application takes anywhere from two weeks to up three weeks for you to receive your first check. In
order to establish eligibility, the unemployment ... Show more content on Helpwriting.net ...
It is important to have all these items on your first visit to save time. It might be a good idea to visit
the unemployment office website to verify what item is needed before you start the application
process.
Unemployment Benefits
Your state adjudicates your unemployment benefits as dictated by Federal laws. Your benefits are
based on your wages as well as the length of time work during the base period. The State base
period varies, but all states stipulate that the unemployment was beyond your control.
Child Care
Contact your local United Way office, United Way offices sometimes have child care facilities that
is income based. Another option you might try is the possibility of becoming a part of a job training
programs, these programs sometimes offer child care services to their participants.
Food
Check to see if you are eligible for the Supplemental Nutritional Assistance Program (SNAP)
formally the Food Stamp Program. Snap is a Federal program that offers you the ability to purchase
food for your family at most grocery stores. However, there are income limitations plus other
stipulated guidelines. You can contact this program to see if they are able to provide any assistance.
If you have school age children, you can contact the school system to see if your kids are now
eligible for reduce breakfast or lunch programs.
Utility
Call you local utility company to see if they offer a budget plan. Some

Multitasking Experiment and Results
Introduction Multitasking is part of everyday life. Daily routines from driving to work or school, to
coming home, involve people handling more than one task at a time. At what point is it too much to
handle before mistakes are being made? When someone answers a call on their cell phone while
driving, that is multitasking, and that has shown to be hazardous. When a student is instant
messaging and writing a paper at the same time, that is hazardous as well, but not in the way one
would immediately think. Heavy media use may be associated with decreased social well–being and
could cause harm on young adults psychological functioning. Also, people who often multitask with
media such as the TV, the internet, etc, have shown instances in which there was a diminished
ability to effectively filter non–important information cognitively. The usage of media that college
students use today has increased by at least 20% in the last decade (Alzahabi & Becker, 2013).
According to Stephen Monsell, everything people do requires a schema or task–set to perform that
function. Mr. Monsell stated that we use executive control to pick and perform the proper task–set(s)
that are necessary to complete our current goals or activities without being distracted to complete
other unnecessary goals or activities (Monsell, 2003). Executive Control or Executive Function is a
mental process that connects past experiences people have had with present actions they are going
through. People use this when

Chapter 15 Questions
1. Scheduling involves the timing of operations to achieve the efficient movement of units through a
system. The overall objective of scheduling is faster movement of goods and services through a
facility, better customer service and dependable delivery.
2. The four criteria for determining the effectiveness of a scheduling decision are
Minimize completion time
Maximize utilization
Minimize work in process
Minimize customer waiting time
3. Loading means the assignment of jobs to work or procession centers. Operations managers assign
jobs to work centers so that costs, idle time, or completion times are kept to a minimum. Loading
work centers takes two forms. One is oriented to capacity; the second is related to assignment ...
Show more content on Helpwriting.net ...
6. What is a due date?
A due date is one of the four most popular priority rules, meaning that the job with the earliest due
date is selected first. The example shown indicates that this method is most effective in category 'd'
which is the average job lateness measurement.
7. Explain the terms flow time and lateness?
Flow time is the period required to complete a specific job or a defined amount of work. The flow
time measures the time each job spends waiting plus the time it takes to be processed. Lateness
refers to coming, occurring, or remaining after the correct, usual, or expected time; delayed
8. Which shop–floor scheduling rule would you prefer to apply if you were the leader of the only
team of experts charged with defusing several time bombs scattered throughout your building? You
can see the bombs; they are of different types. You can tell how long each one will take to defuse.
Given this situation I would most definitely use a shop–floor scheduling rule that caters to the major
issues facing this situation. The fact we can see the bombs but they are of different variety plays a
major factor. We are also faced with a timeline to work with which will determine what scheduling
rule is selected. EDD would be select for several reasons; this would prioritize what bombs need to

be defused first. From there, workers can be assigned to getting that work done. Completion time is
relatively low with high

Basic Parameters That Affect The Performance
7. Basic Parameters That Affect The Performance in RTOS
7.1 Multi–tasking and preemptable:
In RTOS the system have to be multitasking and preemptable because those two features make the
RTOS Scheduler end any lower priority task to execute the higher ones or to release some resources
for other tasks that urgently need those resources. Also the system have to handle different level of
priorities of interrupts.(Yerraballi,R. 2000)
7.2 Dynamic deadline identification:
In some scheduling algorithms such as (EDF)the deadline is converted to priority levels. Then we
can control priorities by controlling the deadlines."Although such an approach is error prone,
nonetheless it is employed for lack of a better solution"(Buttazzo, 2005).
7.3 Predictable synchronization:
The threads of the system need to communication and to be synchronized in a timely efficient and
predictable way.
7.4 Sufficient Priority Levels:
In the scheduling algorithms based on priorities. There must be enough levels of priorities. Priority
inversion occur when a low level priority hold the resource that the the high level priority is waiting
for or blocked due to this resource, and the lower priority is delayed because low priority task. "Two
workarounds in dealing with priority inversion, namely priority inheritance and priority ceiling
protocols (PCP), need sufficient priority levels."
7.5 Predefined latencies:
The timing of the systems must be predictable and this is done by defining task switching

Nt1310 Unit 7 Homework
3.1) Output is 5 because in the child process value of the variable "value" is a copy of value(Unix
assigns parent's address space of the variable and gives it to child) and when parent process gets
back the control, value will still be 5.
3.8) Short term scheduler or CPU scheduler: selects a process from the processes (that are in
memory) that are ready to execute and allocates the CPU to it.
Medium term scheduler: It is an intermediate level of scheduling where in process is removed from
memory (temporarily) to reduce the degree of multi programming and can be re introduced into
memory later and execution of the process can be continued from where it is left off.
Long term scheduler: It will be invoked only when a process leaves the system ... Show more
C) mutex lock is better if the thread is put to sleep while holding the lock because in case of
spinlock the thread will always try locking a spinlock if it is not successful which will take lot of
CPU time and resources where as in case of mutex lock , it will allow to sleep during which other
thread can run.
6.2) Preemptive scheduling allows a process to be invoked/disturbed in the middle of its execution
by taking the CPU and assigning it to another process which is in queue where as in case of
NonPreemptive scheduling, process will give up on CPU only when the current process is executed
and finished.
6.10) I/O–bound projects have the property of performing just a little measure of computation
before performing I/O. Such projects regularly don't use up their whole CPU quantum. Whereas, in
case of CPU–bound projects, they utilize their whole quantum without performing any blocking I/O
operations. Subsequently, one could greatly improve the situation utilization of the computer's assets
by giving higher priority to I/O–bound projects and permit them to execute in front of the CPU–
bound

Advantages Of Adiabatic Process
Adiabatic Process
The first thermodynamic process theory which we have believe to be applied in the coffee maker is
adiabatic process. The reason why we chose this process is because the filter of the coffeemaker is
actually made up of adiabatic materials.
Picture 4
Picture taken from http://www.aliexpress.com/item/10–PCS–Syphon–coffee–maker–filter–Vacuum–
Coffee–Brewer–Flannel–filter–paper/698892483.html
In picture 4, shows the filter of the vacuum coffeemaker. The filter of the coffeemaker is made up of
adiabatic material is so that the hot boiling water can pass through the filter without damaging the
filter.
The adiabatic filter will not increase or decrease in temperature and so the coffee brewed will have
no change in terms of taste. Adiabatic process is applied ... Show more content on Helpwriting.net ...
This is one of the advantages for having isochoric process in the coffee maker. The constant volume
process is a thermodynamic process in which the volume of the closed system undergoing a process
remains constant. There is now work done on or by the gas. The volume of the water during the
process where the coffee was made will not increases or decreases. Since the volume is remains
constant, so there is no work transfer. Moreover, the advantages are increasing the internal energy.
The only effect of heat transfer is to raise the internal energy level. When heat absorbed is
completely used, it changes the internal energy and also the temperature. In coffee maker, the
bottom globe is heated up. It was then become water vapour and accumulate at the bottom globe.
This causes the pressure of the bottom globe increases while the pressure in the upper globe
decreases. The change in pressure is caused by the change in internal energy. As the internal energy
increases, the pressure also increases as well as the temperature. The relation between pressure and
the temperature is related to the Charles's law. The equation is P_1/T_1 =P_2/T_2

A Report On The Management System
Section 2: Problem Explained
As stated above, BGC is done after a resource is hired. Now an unverified resource is there in the
company which directly alarms security issues if that resource is found to be fraud or have a
criminal background. Several problems hits when a BGC is done after hiring, some of which are:
a) An unidentified resource is in the company which alarms security.
b) No one is sure if the resource is having the proper education criteria which s/he has shown.
c) A resource is to be paid for the time s/he is on bench when he is unbilled by the client which hits
direct cost of the company.
d) A resource is using space, water, electricity without getting billed.
e) A resource is not even getting trained and allowed to sit idle.
These are certain issues which no company can ignore as if they fail, it will compromise with the
reputation of the company. Although, several measures has been taken to train the employee while
BGC is conducted which will at least reduce the time to get a resource to properly indulge into a
project.
A Better approach is needed because the above situations are such which impact direct cost of the
company and it's not like that it can't be eliminated but necessary steps is to be taken to eliminate
them which will reduce direct cost and increase gross margin. Thus a new approach is requires here
which will analyze these issues in depth and propose a solution to eliminate them. To support this,
let us talk in terms of revenue, cost and

Advantages And Disadvantages Of Multithreading
threads to work.
Also , this is a generation where almost everyone has a smartphone and hence many of us confuse
multithreading and multitasking as similar.
Almost all mobiles are Dual–Core or Quad–Core and this therefore means that the mobile has either
2 or 4 CPU's which are capable of executing different instructions at the same time.
The different threads can hereby run in parallel on different CPUs which can help execute
instructions faster and accurately.
Multi–threading is not the same as multi–tasking, multi–tasking is the ability to run multiple
programs at the same time; while multi–threading is the ability to execute different portions of the
same program at the same time.
In very easy language multi threading in Operating System ... Show more content on
Helpwriting.net ...
We'll consider threads as kid methods that share the parent process resources however execute
severally. Multiple threads of one method will share the CPU in an exceedingly single CPU system
or (purely) run in parallel in an exceedingly data processing system. A multitasking system will have
multi rib processes wherever totally different processes share the CPU and at identical time every
has its own threads.
The question is why we want to possess multiple threads of execution among one method context.
Let's consider an example wherever it's additional convenient to possess a multi rib application.
Suppose that we simply have a UI application wherever you would like to issue a command that
need while to end let's consider a mathematical computation. Unless you run this command in an
exceedingly separate execution thread you'll not be able to move with the most application user
interface (for example change a progress bar) as a result of its attending to be not responding
whereas the calculation is

The Bean Trees Essay Questions

Recommended

Recommended

More Related Content

More from Jessica Howard

More from Jessica Howard (20)

Recently uploaded

Recently uploaded (20)

The Bean Trees Essay Questions