Dual cooling system

1. Department Of Mechanical Engineering
Acropolis Institute of Technology & Research, Indore (M.P.)
Project Code:- ME-508
Session July- Dec 2021
Submitted in partial fulfillment of requirement for the Award of Degree of Bachelor
of Technology in Mechanical Engineering
Minor Project-I Presentation on
“Dual cooling system”
Submitted To
1
Presented By: Guided By:
1. Student Name (Enrollment No.) Prof. /Dr. …………
2. Student Name (Enrollment No.) (Designation)
3. Student Name (Enrollment No.)
RAJIV GANDHI PROUDYOGIKI VISHWAVIDYALAYA
BHOPAL (M.P.)
DEPARTMENT OF MECHANICAL ENGINEERING

2. “Project Title”
‘………………………………………….’’
2
DEPARTMENT OF MECHANICAL ENGINEERING

3. Consent Letter
Consent letter is sent to Project Coordinator through guide
⮚ Yes
⮚ No
3
DEPARTMENT OF MECHANICAL ENGINEERING

4. S NO Topic Slide No
DEPARTMENT OF MECHANICAL ENGINEERING 4
Contents

5. Note:- Introduction should be in brief and clean with suitable format as per given
5
Introduction of Proposed Project
A dual cooling system combines the benefits of evaporative
coolers (also known as swamp coolers) and regular air
conditioning systems to effectively cool your home.
• It allows you to control your indoor cooling environment
along with lowering utility costs according to the humidity
level that is comfortable to you.
How evaporative cooler works ?
• an evaporative air cooler is a type of air conditioner that
works by harnessing the power of evaporation to cool air
temperatures. When water evaporates, it turns from liquid to
gas. As it does so, the highest-energy particles leave the
• water first, and this leads to a drop in temperature.
• .
DEPARTMENT OF MECHANICAL ENGINEERING

6. 6
heat exchanger :
• A heat exchanger is a system used to transfer heat between
two or more fluids.
Radiator:
• Radiators are heat exchangers used to transfer thermal
energy from one medium to another for the purpose of
cooling and heating.
• The majority of radiators are constructed to function
in cars, buildings, and electronics.

7. Note:- Objective should be point wise, brief with suitable format as per guidelines
7
Objectives of Project
1.To give more cooled air.
2.Enviourmental friendly.
3.Economical and safe.
4.No wastage of resources .
DEPARTMENT OF MECHANICAL ENGINEERING

8. Link for
paper:https://www.researchgate.net/publication/265890843_A_Review_of_Evaporative_Cooling_
Technologies
8
Literature Review-1
DEPARTMENT OF MECHANICAL ENGINEERING
Title “A Review of Evaporative cooling Technolgies”
Year Author Name
Methodology
2015 Omar Amaer, R.Boukhanouf i.Provide sufficient cooling
comfort
ii.Low energy consumption
in building
Parameters Findings Gap
i.
ii.
iii.
i.
ii.
iii.
i.
ii.
iii.

9. https://www.ijrrjournal.com/IJRR_Vol.2_Issue10_Oct2015/IJRR0110.pdf
9
Literature Review-2
DEPARTMENT OF MECHANICAL ENGINEERING
Title
“A Review on Studies and Research on Various Aspects of
Evaporators”
Year Author Name
Methodology
2015 Sunil J. Kulkarni i.Using liquid vapour heat
exchanger.
ii.
Parameters Findings Gap
i.
ii.
iii.
i.
ii.
iii.
i.
ii.
iii.

10. Link for paper:
1
Literature Review-3
DEPARTMENT OF MECHANICAL ENGINEERING
Title
Year Author Name
Methodology
i.
ii.
Parameters Findings Gap
i.
ii.
iii.
i.
ii.
iii.
i.
ii.
iii.

11. Link for paper:
1
Literature Review-4
DEPARTMENT OF MECHANICAL ENGINEERING
Title
Year Author Name
Methodology
i.
ii.
Parameters Findings Gap
i.
ii.
iii.
i.
ii.
iii.
i.
ii.
iii.

12. Link for paper:
1
Literature Review-5
DEPARTMENT OF MECHANICAL ENGINEERING
Title
Year Author Name
Methodology
i.
ii.
Parameters Findings Gap
i.
ii.
iii.
i.
ii.
iii.
i.
ii.
iii.

13. Methodology
To place the cooler at the first floor and place the radiator with
exhaust fan in the ground floor. When cold water coming from the
cooler to radiator through the pipe. The air from the atmosphere
goes inside through fan and passes through the radiator without
getting in contact with water. Heat exchange from radiator air will
be cooled without humidity.
DEPARTMENT OF MECHANICAL ENGINEERING 13

14. Technical term and area of
design
Humidification-The process in which the moisture or water
vapor or humidity is added to the air without changing its dry
bulb (DB) temperature is called as humidification process.
Sensible cooling-
DEPARTMENT OF MECHANICAL ENGINEERING 14

15. CAD Model
DEPARTMENT OF MECHANICAL ENGINEERING 15

16. References
1.V. Vakiloroaya, B. Samali, A. Fakhar, and K. Pishghadam,
of different strategies for HVAC energy saving Energy
Conversion and Management, vol. 77, pp. 738-754, 2014.
2.Vinod Kumar Verma, Ivan Sunit Rout, A.K.Rai, Abhishek
Gaikwad, Optimization of parameters affecting the
performance of passive solar distillation system by using
Taguchi method, IOSR Journal of Mechanical and Civil
Engineering,2013, 7(2), 37-42.
3.
DEPARTMENT OF MECHANICAL ENGINEERING 16

17. Questions?
DEPARTMENT OF MECHANICAL ENGINEERING 17

18. THANK YOU
18
DEPARTMENT OF MECHANICAL ENGINEERING

19. General Guidelines
● Standard Template to be followed
● Minimum Font Size = 24 (Time New Roman)/ Calibri /Verdana
to be used in the Main Text and 32 in Title text
● Text should be ALIGNED as JUSTIFIED.
● Use of bullets, numbers preferred
● Should NOT be descriptive use only points
● Should have Heading/Sub-Heading on the top of each slide
Faculty Name: _____________
DEPARTMENT OF MECHANICAL ENGINEERING
Slide No.