Vishwakarma Yojana for development of villages by identifying the requirements of villages. Under this project the villages are surveyed and this project was identified and selected for implementation. Rurbanization is to bring peace of mind to the villagers by providing them the basic amenities required and still keeping the villages oulintact. This project gives one new idea for Development of rural villages. Also gives procedure how they fulfill requirement of the villages. Now a day people are moving from rural to urban are due to lack of basic amenities. With the help of this Yojana we can bring awareness about the thing which are not available at rural areas. So this help to provide better solution for the available problems in rural area like drinking water, Drainage facility, road network .The aim of the project is ”œDeveloping village with a ”˜rural soul’ but with all urban amenities that a city may have”. In Gujarat state for the development rural area considering the basic Physical infrastructure facilities like sewerage system, water supply, village roads, network of electricity, sewage disposal system and other. Parmar Tushar D. | Jadav Harshad M | Prof. A. K. Shah | Prof. M. B. Tadvi "Vishvakarma Yojana Project an Approach of Electrical Needs in the Village of Tadava and Dalvada" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-7 | Issue-3 , June 2023, URL: https://www.ijtsrd.com.com/papers/ijtsrd56360.pdf Paper URL: https://www.ijtsrd.com.com/humanities-and-the-arts/social-science/56360/vishvakarma-yojana-project-an-approach-of-electrical-needs-in-the-village-of-tadava-and-dalvada/parmar-tushar-d
2. International Journal of Trend in Scientific Research and Development @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD56360 | Volume – 7 | Issue – 3 | May-June 2023 Page 282
have been constructed by the government to provide
drinking water to the villagers. But most of the roads
in the village are unpaved, proper drainage system,
24x 7 hours electricity, insufficient water for
irrigation, post office, bus stop etc. facilities are not in
the village.
Dalvada is a village in shehra taluka of Panchmahal
district in the Indian state of Gujarat. It is 8 km from
the city. Dalvada village is managed by an elected
sarpanch every five years. According to the 2011
census of India, the population of Dalvada village is
4721. The number of houses in Tadava village is 883.
The main occupation of the people living in this
village is agriculture and animal husbandry. The
village has wells, taps, hand pumps and bore wells for
drinking water but the village does not have facilities
like irrigation, post office, bus stop, proper sewerage
system.
STUDY OF THE AREA:
INTRODUCTION of Tadava village:
Village Name: Tadava
Taluka: shehra
District: Panchmahal
State: Gujarat
Pincode: 389210.
Area: 906.29 hectares
Population: 4091
Households: 800
Nearest Town: Godhra
(Mape of Tadava village)
INTRODUCTION of Dalvada village:
Village Name: Dalvada
Taluka: shehra
District: Panchmahal
State: Gujarat
Pincode: 389210.
Population: 4721
Households: 883
Nearest Town: Godhra
(Mape of Dalvada village)
NEED OF THE STUDY:
To know the current development going on in
village.
To know the problems which villagers are facing.
To provide basic and sustainable facilities to rural
area to reduce the pressure on urban areas.
To improve the living standard of rural people by
providing facilities and better Infrastructure.
ELECTRICAL CONCEPT:
India is one of the largest countries in the world,
where the people's occupation is predominantly
agriculture and most of the population lives in
villages. Many of these villages are remotely located
and their connectivity with the grid is very difficult
resulting in their being not electrified at all or lack of
continuous supply. For the development of the region,
there is every need to utilize energy efficient
techniques and potential of available renewable
energy resources. Renewable energy is energy
generated from natural resources such as sunlight,
wind, rain, tides and geothermal heat which are
renewable. Renewable energy is energy that is
generated from natural processes that are
continuously replenished.
3. International Journal of Trend in Scientific Research and Development @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD56360 | Volume – 7 | Issue – 3 | May-June 2023 Page 283
PROPOSED DESIGNS:
Proposed Designs
1.GSM based Greenhouse Environment
Monitoring and Controlling
4. Controlling of agriculture motor with water
level using GSM and Arduino Nano
2. Smart Dustbin Using Arduino 5. Electronic Water Level Controller System
3. Automated farm protection using PIC & GSM
6.GREEN HOUSE MONITORING AND
CONTROLING SYSTEM USING ARDUINO
Reason for Students Recommending this Design:-
1. GSM based Greenhouse Environment Monitoring and Controlling
(3D design of GSM based Greenhouse Environment Monitoring and Controlling)
Greenhouse monitoring and control system mainly includes greenhouse remote monitoring and control software
and greenhouse data acquisition controller. Greenhouse data acquisition controller is mainly composed of a
Sigsbee wireless acquisition module, CO2 sensor, soil moisture sensor, air temperature and humidity sensor.
GSM based Greenhouse Environment Monitoring and Controlling is an advanced farming technique. This
project can be used in the Greenhouse to monitor and control various parameters like Humidity, Temperature,
Light, and Soil Moisture. These parameters are controlled with the help of Relays and DC motors.
2. Smart Dustbin Using Arduino
(Smart Dustbin Using Arduino)
The smart dust bin, powered by Arduino, is equipped with sensors to identify objects in close proximity. A
signal is then transmitted to a servo motor, which unhinges the lid. The motor is programmed to shut the lid after
a certain duration. Smart bin not only makes waste collection and handling extremely convenient but also helps
in maintaining a garbage-free and sustainable environment for the public. The system of waste collection and the
optimized route offered by smart bins eliminate the risk of overflowing along with minimizing the CO2 emission
4. International Journal of Trend in Scientific Research and Development @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD56360 | Volume – 7 | Issue – 3 | May-June 2023 Page 284
3. Automated farm protection using PIC & GSM
(Design of Automated farm protection using PIC & GSM)
Farm automation practices can make agriculture more profitable while also reducing the ecological footprint of
farming at the same time. Site-specific application software can reduce the amount of pesticides and fertilizer
used while also reducing greenhouse gas emissions.
4. Controlling of agriculture motor with water level using GSM and Arduino Nano
(Design of Controlling of agriculture motor with water level using GSM and Arduino Nano)
Water pump gets automatically off when system finds enough moisture in the soil. Whenever system switched
On or off the pump, a message is sent to the user via GSM module, updating the status of water pump and soil
moisture. This system is very useful in Farms, gardens, home. Efficient water usage – Automatic irrigation
systems use sensors and technology to accurately measure and distribute water, reducing water waste and
ensuring plants receive the right amount of water they need. This design is very useful for farmers in agriculture
purpose.
5. International Journal of Trend in Scientific Research and Development @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD56360 | Volume – 7 | Issue – 3 | May-June 2023 Page 285
5. Electronic Water Level Controller System
(Design of Electronic Water Level Controller System)
Water level controllers that automatically adjust the water level save energy. They do it by automatically turning
off the motor when the tank is full and when there is no water flow to the tank. This means that less water and
energy are utilized to control a water supply. Level controllers monitor, regulate, and control liquid or solid
levels in a process. Level controllers receive input from a level-sensing device and respond accordingly based on
the device and user specifications.
6. GREEN HOUSE MONITORING AND CONTROLING SYSTEM USING ARDUINO
(Design of GREEN HOUSE MONITORING AND CONTROLING SYSTEM USING ARDUINO)
6. International Journal of Trend in Scientific Research and Development @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD56360 | Volume – 7 | Issue – 3 | May-June 2023 Page 286
In today’s greenhouses, many parameter
measurements are required to monitor and control for
the good quality and productivity of plants. But to get
the desired results there are some very important
factors which come into play like Temperature,
Humidity, Light and Water, which are necessary for a
better plant growth. Keeping these parameters in
mind I have built an Automatic Green House
Controlling and Monitoring System over GSM
module using Arduino. This system is very efficient
for growing good quality plants. The other important
part of this project is that it is fully automatic.
Arduino automatically turns on and turns off the
appliances.
ACKNOWLEDGEMENT
We would like to thank our project guide Prof. Prof.
A. K. Shah, & Prof. M.B.Tadvi for his technical
guidance and kind support through the project. We
are also thankful to Gujarat Technological University,
Ahmedabad for providing us the such opportunity to
work under the Vishwakarma Yojana to get real work
experience and applying technical knowledge in the
development of villages. We are also thankful to the
Villagers, Sarpanch, Talati.
REFERENCES
[1] http://vy.gtu.ac.in
[2] https://www.wikipedia.org
[3] https://www.researchgate.net
[4] https://en.wikipedia.org/wiki/Smart_city
[5] Migration
[6] Transmission and distribution
[7] Microprocessor and controller
[8] Google map
[9] Chrome