1. In this print screen you can see how I have changed the
audio by making the sounds more intense and I did this by
starting with an ambient sound and then changed it to
sound more like an intense clicking sound.
Here you can see what I have used to manipulate my
audio I have used this in particular to get a more intense
and low pitch piece of audio I have done this to give the
sound a better affect and to get a better sound from this.

2. During this piece of audio I have changed the sound from
dropping stones to a bleeping sound I’ve done this by
changing the pitch of the audio and by changing some
other things on it this has helped me to changing the pitch
and help me get a more intense and better sound overall
from the final product.
Here you can see which type of audio I have used to get
my final affect I have used this to try and make a more
deep and mellow sound affect and in my own opinion I
believe it does sound mellow and the overall sound turned
out well.

3. Here you can see the piece of audio I have changed to
make the audio sound different and to make it have a
better sound affect this piece of audio works well with
what I have changed it with because it fits in to how I have
developed and updated the overall final version of this
audio.
Here you can see what I have used to change and develop
the audio I have used I have changed the audio to sound
more intense and to have a certain element to it to give it
a better affect.

4. Here you can see that I have added an effect to my audio
by adding the effect it has made my audio sound more
intense and it has a deeper pitch than it usually would
have. Another thing is the audio becomes more intense as
I have changed things in the audio cut sequence.
Here you can see what I have used to change how my
audio sounds I have changed my sound to sound more like
a repeating beat in which occasionally had a even bigger
boom beat this gives the sound an intense and occurring
sound to it.

5. Here you can see my audio in this piece of audio I have
changed the sound of a squeaky pen writing on a board I
have used this audio to get a more high pitch affect while
keeping a stead but squeaky beat I have done this to try
and get a better affect while still trying to keep the original
audio to sound similar to its original form.
Here you can see the type of audio I have used as well as
the mixer I have used to create the new sound this mixer
allowed me to change the pitch of the audio to a more
higher pitcher and then to a steady but lower pitch beat
straight after this piece of audio turned out well because
of this and it still sounds like the original audio I used to
create the sound.

6. Here you can see the piece of audio in which I have edited
this audio was originally breaking sticks but I managed to
change it to sound like a drum beat by changing the sound
of the audio I have kept the same beat but I have adjusted
it slightly to get an even steadier beat and o get a better
sound from it overall.
Here you can see what I have used to develop and change
the sound in which I have recorded I have changed the
sound by making the beat of it steady but also the sound
has become more intense and faster sound this makes it
intense and makes the sound much better than it was
beforehand.