This document provides specifications for a Viv damper with an electrically or pneumatically operated actuator. It includes details on the damper size and materials, the actuator model and accessories, and general notes. The damper is 1050mm x 300mm with 12 blades made of IS2062 'B' material. It will be fitted with either a Sdtork make electric actuator or a Sude make pneumatic actuator. The document lists technical details and optional accessories for the damper assembly and actuator.

1. 1952VIV-SERIES Data Sheet Ref. No : SU-1962-00001
MODEL NO.:
1952VIV1050x300IS2062 ‘B’ SUDE
IS2062 ‘B’061075x1012 PUNE / BANGALORE
2CFLINSD-4000-20-
WG60PT3PHWMCP
ELECTRICALLY OPERATED Quotation Ref. No
VIV DAMPER TECHNICAL
SPECIFICATION DETAILS
Quotation Date
1. ITEM SUDE OFFERS THE ASSEMBLY OF VIV DAMPER
FITTED WITH SDTORK MAKE THREE PHASE
ELECTRICAL ACTUATOR
2. MAKE SUDE
3 APPLICATION STEEL PLANT
4 TECHNICAL SPECIFICATION OF VIV DAMPER
4.1 Damper Size 1050mm
4.2 Damper Length 300mm
4.3 Housing MOC IS2062 ‘B’
4.4 Flap Material IS2062 ‘B’
4.5 Housing Thickness 06mm
4.6 Flap Thickness 10mm
4.7 No. Of Blades 12
4.8 Flange Details 75x10mm
4.9 Counter Flanges 2 NO. Counter Flange
4.10 Flowing medium Clean Gas
4.11 Temperature 350*C
4.12 Design Pressure +/-500mmWC
4.13 Characteristic Proportionate
4.14 Sdtork make 3 phase Electric reversible stayput Type
actuator, Model no.: SD-4000-20-WG60 Supply voltage:
415 volts 3 phase AC. Also Supplied with 3 phase panel
Fitted with
having Input signal:415 volts 3 phase & 4-20mA, Output
signal: 4-20mA.

2. 5.
ACTUATOR DETAILS
5.1 Series 4000
5.2 Model SD-4000-20-WG60
5.3 Out Put motion. Quarter Turn
5.4 Rated output Torque – Kg-m 1750 Nm
5.5 Effective Output Speed-RPM 60 RPM
5.6 Output coupling
5.7 Diameter of stem As Per Valve Requirement
5.8 Stroke 0 - 90˚
5.9 Time of operations – Sec /90˚ 15 sec/90 deg
5.10 Manual over-ride Provided-Hand wheel with auto declutching
arrangement
5.11 Travel Limit Switches Qty : 2 nos., Contacts :
Rating: 5A-250 VAC/0.46A-250VDC.
5.12 Torque Limit Switches. Qty : 2 nos., Contacts :
Rating: 5A-250 VAC/0.46A-250VDC.
5.13 Local Position Indicator. Provided Continuous type.
5.14 Class of Protection. IP67
5.15 Duty
Regulating
5.16 Weight of the actuator.
85 kg’s
5.17 Mounting Dimensions
5.18 Area of Operation Safe
5.19 Wiring Diagram
6 MOTOR DETAILS
6.1 Type. TEFC Induction Motor.
6.2 Supply 415 V AC 50 Hz 3 Phase
6.3 Duty Regulating
6.4 Insulation Class F
6.5 Rating 2 Hp
5 OPTIONAL ACCESSORIES
5.1 Feedback Out put : 100-235 Ohms Provided
Potentiometer

3. 5.2 Additional Limit Qty : 2 nos. Provided
Switches Type : 1 NO + 1 NC, Change over contact,
Contact rating: 5 A, 230VAC
5.3 Two Wire Transmitter Type : Two wire, Actuator mounted Provided
Supply : 12-36 VDC, Output : 4-20 m A
5.4 Remote Position Available in servo controller Provided
indicator Digital : 0-100 %
5.5 Servo controller Input signal : 4-20 m A, Output : 4-20 m A Provided
(Valve positioner) Feed back : 0-500 Ohms, supply 230 V AC,
Panel Mounted This will have auto calibration facility.
5.6 Interface Card Input signal : 4-20 m A, Not Provided
Actuator Mounted Feed back : 100-235 Ohms,
5.6 Control Panel / Integral starter inbuilt in control panel Provided
Integral Starter
5.7 Local Push Button Provided
Station
5.8 Space Heater Not Provided
5.9 Thermostat Not Provided
6. GENERAL POINTS
6.1 Scope Of Supply Actuator with above accessories
6.2 Inspection By the Customer at our works
6.3 Test Certificates & 2 Sets with Unit
Manuals
6.4 Warranty 18 months from the date of supply or 12 months from
the date of installation whichever is earlier.
6.5 Painting RAL 5021
6.6 Packing Wooden Box packing – On demand
SPECIAL NOTES:

4. 1952VIV-SERIES Data Sheet Ref. No : SU-1962-00001
MODEL NO.:
1952VIV1050x300IS2062 ‘B’ SUDE
IS2062 ‘B’061075x1012 PUNE / BANGALORE
2CFONFSD-4000-20-WG60
ELECTRICALLY OPERATED Quotation Ref. No
VIV DAMPER TECHNICAL
SPECIFICATION DETAILS
Quotation Date
1. ITEM SUDE OFFERS THE ASSEMBLY OF VIV DAMPER
FITTED WITH SDTORK MAKE THREE PHASE
ELECTRICAL ACTUATOR
2. MAKE SUDE
3 APPLICATION STEEL PLANT
4 TECHNICAL SPECIFICATION OF VIV DAMPER
4.1 Damper Size 1050mm
4.2 Damper Length 300mm
4.3 Housing MOC IS2062 ‘B’
4.4 Flap Material IS2062 ‘B’
4.5 Housing Thickness 06mm
4.6 Flap Thickness 10mm
4.7 No. Of Blades 12
4.8 Flange Details 75x10mm
4.9 Counter Flanges 2 NO. Counter Flange
4.10 Flowing medium Clean Gas
4.11 Temperature 350*C
4.12 Design Pressure +/-500mmWC
4.13 Characteristic Proportionate
4.14 Sdtork make 3 phase Electric reversible stay put Type
actuator, Model no.: SD-4000-20-WG60 Supply voltage:
Fitted with
415 volts 3 phase AC.
5.
ACTUATOR DETAILS
5.1 Series 4000

5. 5.2 Model SD-4000-20-WG60
5.3 Out Put motion. Quarter Turn
5.4 Rated output Torque – Kg-m 1750 Nm
5.5 Effective Output Speed-RPM 60 RPM
5.6 Output coupling
5.7 Diameter of stem As Per Valve Requirement
5.8 Stroke 0 - 90˚
5.9 Time of operations – Sec /90˚ 15 sec/90 deg
5.10 Manual over-ride Provided-Hand wheel with auto declutching
arrangement
5.11 Travel Limit Switches Qty : 2 nos., Contacts :
Rating: 5A-250 VAC/0.46A-250VDC.
5.12 Torque Limit Switches. Qty : 2 nos., Contacts :
Rating: 5A-250 VAC/0.46A-250VDC.
5.13 Local Position Indicator. Provided Continuous type.
5.14 Class of Protection. IP67
5.15 Duty
On/Off Type
5.16 Weight of the actuator.
85 kg’s
5.17 Mounting Dimensions
5.18 Area of Operation Safe
5.19 Wiring Diagram
6 MOTOR DETAILS
6.1 Type. TEFC Induction Motor.
6.2 Supply 415 V AC 50 Hz 3 Phase
6.3 Duty On/Off Type
6.4 Insulation Class F
6.5 Rating 2 Hp
5 OPTIONAL ACCESSORIES
5.1 Feedback Out put : 100-235 Ohms Provided
Potentiometer
5.2 Additional Limit Qty : 2 nos. Provided
Switches Type : 1 NO + 1 NC, Change over contact,
Contact rating: 5 A, 230VAC
5.3 Two Wire Transmitter Type : Two wire, Actuator mounted Not Provided
Supply : 12-36 VDC, Output : 4-20 m A
5.4 Remote Position Available in servo controller Not Provided
indicator Digital : 0-100 %

6. 5.5 Servo controller Input signal : 4-20 m A, Output : 4-20 m A Not Provided
(Valve positioner) Feed back : 0-500 Ohms, supply 230 V AC,
Panel Mounted This will have auto calibration facility.
5.6 Interface Card Input signal : 4-20 m A, Not Provided
Actuator Mounted Feed back : 100-235 Ohms,
5.6 Three Phase Control 3 phase panel having Input signal:415 volts Not Provided
Panel 3 phase & 4-20mA, Output signal: 4-20mA.
5.7 Local Push Button Not Provided
Station
5.8 Space Heater Not Provided
5.9 Thermostat Not Provided
6. GENERAL POINTS
6.1 Scope Of Supply Actuator with above accessories
6.2 Inspection By the Customer at our works
6.3 Test Certificates & 2 Sets with Unit
Manuals
6.4 Warranty 18 months from the date of supply or 12 months from
the date of installation whichever is earlier.
6.5 Painting RAL 5021
6.6 Packing Wooden Box packing – On demand
SPECIAL NOTES:

7. 1962VIV-SERIES Data Sheet Ref. No : SU-1962-00001
MODEL NO.:
1962VIV1600x350IS2062 ‘B’ SUDE
IS2062 ‘B’100675x1016 PUNE / BANGALORE
2CFLINDA50FCV062FRL06
1300MBV06GBEPPOSJB
PNEUMATICALLY OPERATED Quotation Ref. No
VIV DAMPER TECHNICAL
SPECIFICATION DETAILS
Quotation Date
1. ITEM SUDE OFFERS THE ASSEMBLY OF VIV DAMPER
FITTED WITH PNEUMATIC DOUBLE ACTING
ACTUATOR
2. MAKE SUDE
3 APPLICATION STEEL PLANT
4 TECHNICAL SPECIFICATION OF VIV DAMPER
4.1 Damper Size 1600mm
4.2 Damper Length 350mm
4.3 Housing MOC IS2062 ‘B’
4.4 Flap Material IS2062 ‘B’
4.5 Housing Thickness 10mm
4.6 Flap Thickness 6mm
4.7 No. Of Blades 16
4.8 Flange Details 75x10mm
4.9 Counter Flanges 2 NO. Counter Flange
4.10 Flowing medium Clean Gas
4.11 Temperature 125*C
4.12 Design Pressure +/-500mmWC
4.13 Characteristic Proportionate
4.14 Sude Make DA50 Pneumatic Rotary Double Acting
Fitted with Actuator, Signal Pressure:5.5 to 8.5 bar, Quality of Air:
Filtered & Clean Dry Air
5 PNEUMATIC ACTUATOR DETAILS
5.1 Type Double
5.2 Model DA50
5.3 Spring Clip Steel
5.4 Double Acting Cap Aluminium Alloy
5.5 Cap O-Ring N.B.R

8. 5.6 Piston Polyarilamide
5.7 Cylinder Aluminium Alloy
5.8 Washer Polyamide
5.9 Spring Clip Steel
5.10 Position Indicator Polyamide
5.11 Piston Guide Polyacetal
5.12 Guide Ring Polyacetal
5.13 Piston O-Ring N.B.R
5.14 O-Ring N.B.R
5.15 Springs Set DIN-17223-C
5.16 Spring Return Cap Aluminium Alloy
5.17 Shaft AISI-303 Stainless Steel
5.18 Signal Pressure 5.5 to 8.5 Bar
5.19 Quality Of Air Filtered and Clean Dry Air
5.20 Opening and Closing 10.5 [Open] & 7 [Close]
Time
5.21 Actuator Weight 30.7 kg.
6 OPTIONAL ACCESSORIES
6.1 Flow Control Valve 2 NOS. Provided
6.2 Filter Regulator Size: 6mm, Body Material: Provided
Lubricator & Gauge Aluminium, Inlet Pressure: 10 Bar,
Regulating Pressure: 0 to 7 Bar,
Type Of Knob: Manual.
6.3 Manual Ball Valve Of ¼” Size Provided
6.4 Gear Box For Manual Operation Provided
6.5 Siemens Electro Having Input signal: 4-20mA & Output signal: Provided
Pneumatic 4-20mA, Inlet Pressure: 6 Bar, Quality of air:
Filtered Dry & Clean Air.
Positioner
6.6 BCH Make Junction Provided
Box
7 GENERAL POINTS
7.1 Inspection By Customer at our works
7.2 T. C.& Manuals 2 Sets with unit
7.3 Warranty 18 months from the date of supply or 12 months from the date of
installation which ever is earlier.
7.4 Packing Thermo cool Packing Housed in Corrugated Box
SPECIAL NOTE :

9. 1962VIV-SERIES Data Sheet Ref. No : SU-1962-00002
MODEL NO.:
1962VIV1600x350IS2062 ’B’
SUDE
IS2062’B’100675x10162CFONF
DA50FCV062FRL061300MBV0 PUNE / BANGALORE
6JB1184D4W5P2PDCPOP066.0B
SPALS4BNSPC1230VACGP2ALR
PNEUMATICALLY OPERATED Quotation Ref. No
VIV DAMPER TECHNICAL
SPECIFICATION DETAILS
Quotation Date
1. ITEM SUDE OFFERS THE ASSEMBLY OF VIV DAMPER FITTED
WITH PNEUMATIC DOUBLE ACTING ACTUATOR
2. MAKE SUDE
3 APPLICATION
4 TECHNICAL SPECIFICATION OF VIV DAMPER
4.1 Damper Size 1600mm
4.2 Damper Length 350mm
4.3 Housing MOC IS2062 ‘B’
4.4 Flap Material IS2062 ‘B’
4.5 Housing Thickness 10mm
4.6 Flap Thickness 6mm
4.7 Flange Details 75x10mm
4.8 Counter Flanges 2 NO. Counter Flange
4.9 Flowing medium Clean Gas
4.10 Temperature 125*C
4.11 Design Pressure +/-500mmWC
4.12 Characteristic On / Off type
4.13 Sude Make DA50 Pneumatic Rotary Double Acting Actuator,
Fitted with Signal Pressure:5.5 to 8.5 bar, Quality of Air: Filtered &
Lubricated.
5 PNEUMATIC ACTUATOR DETAILS
5.1 Type Double
5.2 Model DA50
5.3 Spring Clip Steel
5.4 Double Acting Cap Aluminium Alloy
5.5 Cap O-Ring N.B.R
5.6 Piston Polyarilamide
5.7 Cylinder Aluminium Alloy
5.8 Washer Polyamide

10. 5.9 Spring Clip Steel
5.10 Position Indicator Polyamide
5.11 Piston Guide Polyacetal
5.12 Guide Ring Polyacetal
5.13 Piston O-Ring N.B.R
5.14 O-Ring N.B.R
5.15 Springs Set DIN-17223-C
5.16 Spring Return Cap Aluminium Alloy
5.17 Shaft AISI-303 Stainless Steel
5.18 Signal Pressure 5.5 to 8.5 Bar
5.19 Quality Of Air Filtered and Lubricated
5.20 Opening and Closing 31 [Open] & 30 [Close]
Time
5.21 Actuator Weight 77.9 kg.
6 OPTIONAL ACCESSORIES
6.1 Flow Control Valve 2 nos of ¼” size Provided
6.2 Filter Regulator Size: ¼”, Body Material: Aluminium, Provided
Lubricator & Gauge Inlet Pressure: 10 Bar, Regulating
Pressure: 0 to 7 Bar, Type Of Knob:
Manual.
6.3 Manual Ball Valve Of ¼” Size Provided
6.4 4 Way 5 Port 2 Of ¼” size, Aluminum body having Provided
Position Double Coil Coil Voltage Of 230VAC Supply
Pilot Operated
Poppet Type
Solenoid Valve
6.5 BCH Make Junction Provided
Box
6.6 Air Lock relay 2 nos of ¼” Size, Setting Pressure: Provided
3.5 Bar, Inlet Pressure: 7 Bar
7 GENERAL POINTS
7.1 Inspection By Customer at our works
7.2 T. C.& Manuals 2 Sets with unit
7.3 Warranty 18 months from the date of supply or 12 months from the date of installation
which ever is earlier.
7.4 Packing Thermo cool Packing Housed in corrugated Box
SPECIAL NOTE :