1250-SERIES Data Sheet Ref. No : SU-1250-00001Electrically Operated Butterfly MODEL NO.: SUDEValve Technical Specifications 1250200WAFCISGBNPN16 LINSD-4000-20-EPOT2LSWCP PUNE BANGALORE CPT200 Quotation Ref. No Quotation Date :1. ITEM Assembly Of 2 Way Butterfly Valve Fitted With Sdtork Make 3 Phase Electrical Actuator.2. MAKE SUDE3 APPLICATION Water Industries6 TECHNICAL SPECIFICATION OF 2 WAY BUTTERFLY VALVE Valve Size 200mm End connection Wafer, Flangeless Suitable for Holding between flanges Body Material Cast Iron Disc Material SG Iron Seating material Nitrile Flowing medium Water Pressure 10 kg/cm2 Operating Angle 90* Type of design PN16 Construction Temperature Ambient Characteristic Linear up to 60* Opening Sdtork Make Three Phase Electrical Reversible Stay put Type Actuator, Supply Voltage: 415 volts 3 Phase AC Actuator is in built with Local Position Indicator & Hand Fitted with Wheel For manual Operation. Type Of Actuator: Splash Proof Direct on Valve, IP67 Construction. Also Supplied With 3 Phase Panel Having Input Signal: 415 volts 3 Phase AC & 4-20mA Output Signal: 4-20mA3. ACTUATOR DETAILS 4.1 Series 4000 4.2 Model SD-4000-20-E 4.3 Out Put motion. Quarter Turn 4.4 Rated output Torque – Kg-m 4.5 Effective Output Speed-RPM 4.6 Output coupling
4.7 Diameter of stem 4.8 Stroke 0 - 90˚ 4.9 Time of operations – Sec /90˚ 4.10 Manual over-ride Provided-Hand wheel with auto declutching arrangement 4.11 Travel Limit Switches Qty : 2 nos., Contacts : Rating: 5A-250 VAC/0.46A-250VDC. 4.12 Torque Limit Switches. Qty : 2 nos., Contacts : Rating: 5A-250 VAC/0.46A-250VDC. 4.13 Local Position Indicator. Provided Continuous type. 4.14 Class of Protection. IP67 4.15 Duty 4.16 Weight of the actuator. 4.17 Mounting Dimensions 4.18 Area of Operation 4.19 Wiring Diagram5 MOTOR DETAILS 5.1 Type. TEFC Induction Motor. 5.2 Supply 415 V AC 50 Hz 3 Phase 5.3 Duty 5.4 Insulation Class F 5.5 Rating5 OPTIONAL ACCESSORIES 5.1 Feedback Out put : 100-235 Ohms Provided Potentiometer 5.2 Additional Limit Qty : 2 nos. Provided Switches Type : 1 NO + 1 NC, Change over contact, Contact rating: 5 A, 230VAC 5.3 Two Wire Transmitter Type : Two wire, Actuator mounted Provided Supply : 12-36 VDC, Output : 4-20 m A 5.4 Remote Position Available in servo controller Provided indicator Digital : 0-100 % 5.5 Servo controller Input signal : 4-20 m A, Output : 4-20 m Provided (Valve positioner) A Panel Mounted Feed back : 0-500 Ohms, supply 230 V AC, This will have auto calibration facility.
5.6 Interface Card Input signal : 4-20 m A, Provided Actuator Mounted Feed back : 100-235 Ohms, 5.6 Control Panel / Integral starter inbuilt in panel Provided Integral Starter 5.7 Local Push Button Provided Station 5.8 Space Heater Not Provided 5.9 Thermostat Not Provided6. GENERAL POINTS 6.1 Scope Of Supply Actuator with above accessories 6.2 Inspection By the Customer at our works 6.3 Test Certificates & 2 Sets with Unit Manuals 6.4 Warranty 18 months from the date of supply or 12 months from the date of installation whichever is earlier. 6.5 Painting RAL 5021 6.6 Packing Wooden Box packing – On demandSPECIAL NOTES: