1. 1952POPPET-SERIES Data Sheet Ref. No : SU-1952-00001
ELECTRICALLY OPERATED MODEL NO.:
1962POP550x712x500IS2062’B’5.0
SUDE
POPPET DAMPER TECHNICAL PUNE / BANGALORE
50x10ONFSD-7000-08-300-SPT3PH
SPECIFICATION DETAILS WCP
Quotation Ref. No
Quotation Date
1. ITEM SUDE OFFERS THE ASSEMBLY OF POPPET DAMPER
FITTED WITH THREE PHASE LINEAR CYLINDER
ELECTRICAL ACTUATOR
2. MAKE SUDE
3 APPLICATION
4 TECHNICAL SPECIFICATION OF POPPET DAMPER
4.1 Damper Inlet
550mm
Dia.
4.2 Damper Outlet
712mm
Dia.
4.3 Bypass Dia. 500mm
4.4 Housing MOC IS2062 ‘B’
4.5 Housing
5mm
Thickness
4.6 Flange Details 50x10mm
4.7 Flowing medium Gas
4.8 Temperature 250 Degree C
4.9 Characteristic On / Off type
4.10 Sdtork Make Three Phase Linear Cylinder Electrical Actuator,
Fitted with
Supply Voltage : 415 V, 3 Phase AC, 50 Hz
5.
ACTUATOR DETAILS
5.1 Series 7000
5.2 Model SD-7000-08-300-S
5.3 Out Put motion. Linear
5.4 Rated output thrust (Push & pull 300 Kgs.
force )
5.5 Output Speed 7 mm / Sec

2. 5.6 Output coupling A – TYPE
5.7 Diameter of stem (For rising stem 30 MM
valve)
5.8 Stroke length for full open to full 500 mm (Adjustable )
close operation
5.9 Time of operations for full open to Depends on stroke
full close position
5.10 Manual over-ride Provided-Hand wheel with
clutch
5.11 Travel Limit Switches 2 nos, 1 NO + 1 NO Change
over contact
5.12 Torque Limit Switches. 2 nos, 1 NO + 1 NO
5.13 Local Position Indicator. Provided Continuous type.
5.14 Class of Protection. IP 55
5.15 Duty S-2
5.16 Weight of the actuator. 50 Kgs
5.17 Mounting Dimensions --
5.18 Area of Operation Safe
5.19 Wiring Diagram SD-3000-300-01
6 MOTOR DETAILS
6.1 Type. TEFC Induction Motor.
6.2 Supply 415 V AC 50 Hz 3 Phase
6.3 Duty S2
6.4 Insulation Class F
6.5 Rating 0.75 Kw/1 Hp, 4 pole / 1500
rpm
7 OPTIONAL ACCESSORIES
5.1 Feedback Out put : 100-235 Ohms Provided
Potentiometer
5.2 Additional Limit Qty : 2 nos. Provided
Switches Type : 1 NO + 1 NC, Change over contact,
Contact rating: 5 A, 230VAC
5.3 Two Wire Transmitter Type : Two wire, Actuator mounted Provided
Supply : 12-36 VDC, Output : 4-20 m A
5.4 Remote Position Available in servo controller Provided
indicator Digital : 0-100 %

3. 5.5 Servo controller Input signal : 4-20 m A, Output : 4-20 m A Provided
(Valve positioner) Feed back : 0-500 Ohms, supply 230 V AC,
Panel Mounted This will have auto calibration facility.
5.6 Interface Card Input signal : 4-20 m A, Not Provided
Actuator Mounted Feed back : 100-235 Ohms,
5.6 Control Panel / Integral starter inbuilt in control panel Provided
Integral Starter
5.7 Local Push Button Provided
Station
5.8 Space Heater Not Provided
5.9 Thermostat Not Provided
6. GENERAL POINTS
6.1 Scope Of Supply Actuator with above accessories
6.2 Inspection By the Customer at our works
6.3 Test Certificates & 2 Sets with Unit
Manuals
6.4 Warranty 18 months from the date of supply or 12 months from
the date of installation whichever is earlier.
6.5 Painting RAL 5021
6.6 Packing Wooden Box packing – On demand
SPECIAL NOTES:

4. 1952POPPET-SERIES Data Sheet Ref. No : SU-1952-00001
ELECTRICALLY OPERATED MODEL NO.:
1962POP550x712x500IS2062’B’5.0
SUDE
POPPET DAMPER TECHNICAL PUNE / BANGALORE
50x10ONFSD-7000-08-300-S
SPECIFICATION DETAILS
Quotation Ref. No
Quotation Date
1. ITEM SUDE OFFERS THE ASSEMBLY OF POPPET DAMPER
FITTED WITH THREE PHASE LINEAR CYLINDER
ELECTRICAL ACTUATOR
2. MAKE SUDE
3 APPLICATION
4 TECHNICAL SPECIFICATION OF POPPET DAMPER
4.1 Damper Inlet
550mm
Dia.
4.2 Damper Outlet
712mm
Dia.
4.3 Bypass Dia. 500mm
4.4 Housing MOC IS2062 ‘B’
4.5 Housing
5mm
Thickness
4.6 Flange Details 50x10mm
4.7 Flowing medium Gas
4.8 Temperature 250 Degree C
4.9 Characteristic On / Off type
4.10 Sdtork Make Three Phase Linear Cylinder Electrical Actuator,
Fitted with
Supply Voltage : 415 V, 3 Phase AC, 50 Hz
5.
ACTUATOR DETAILS
5.1 Series 7000
5.2 Model SD-7000-08-300-S
5.3 Out Put motion. Linear
5.4 Rated output thrust (Push & pull 300 Kgs.
force )
5.5 Output Speed 7 mm / Sec

5. 5.6 Output coupling A – TYPE
5.7 Diameter of stem (For rising stem 30 MM
valve)
5.8 Stroke length for full open to full 500 mm (Adjustable )
close operation
5.9 Time of operations for full open to Depends on stroke
full close position
5.10 Manual over-ride Provided-Hand wheel with
clutch
5.11 Travel Limit Switches 2 nos, 1 NO + 1 NO Change
over contact
5.12 Torque Limit Switches. 2 nos, 1 NO + 1 NO
5.13 Local Position Indicator. Provided Continuous type.
5.14 Class of Protection. IP 55
5.15 Duty S-2
5.16 Weight of the actuator. 50 Kgs
5.17 Mounting Dimensions --
5.18 Area of Operation Safe
5.19 Wiring Diagram SD-3000-300-01
6 MOTOR DETAILS
6.1 Type. TEFC Induction Motor.
6.2 Supply 415 V AC 50 Hz 3 Phase
6.3 Duty S2
6.4 Insulation Class F
6.5 Rating 0.75 Kw/1 Hp, 4 pole / 1500
rpm
7 OPTIONAL ACCESSORIES
7.1 Feedback Potentiometer Provided
7.2 Actuator mounted Two wire N. A.
Transmitter
Model – CPT200
7.3 Servo controller – Position N. A.
Transmitter
7.4 Remote Position Indicator - Digital N. A.
7.5 Space Heater N. A.

6. 7.6 Thermostat N. A.
7.7 Wiring Diagram N. A.
7.8 Integral Starter N. A.
8. GENERAL POINTS
8.1 Scope Of Supply Actuator with above
accessories
8.2 Inspection By the Customer at our
works
8.3 Test Certificates & Manuals 2 Sets with Unit
8.4 Warranty 18 months from the date of
supply or 12 months
from the date of installation
whichever is earlier.
8.5 Painting Dark Gray
8.6 Packing Wooden Box packing – On
demand
SPECIAL NOTES: