1. 1250-SERIES Data Sheet Ref. No : SU-1250-00001
Electrically Operated Butterfly MODEL NO.: SUDE
Valve Technical Specifications 1250200WAFCISGBNPN16
LINSD-4000-20-EPOT2LSWCP PUNE BANGALORE
CPT200
Quotation Ref. No
Quotation Date :
1. ITEM Assembly Of 2 Way Butterfly Valve Fitted With Sdtork Make 3
Phase Electrical Actuator.
2. MAKE SUDE
3 APPLICATION Water Industries
6 TECHNICAL SPECIFICATION OF 2 WAY BUTTERFLY VALVE
Valve Size 200mm
End connection Wafer, Flangeless Suitable for Holding between flanges
Body Material Cast Iron
Disc Material SG Iron
Seating material Nitrile
Flowing medium Water
Pressure 10 kg/cm2
Operating Angle 90*
Type of design PN16 Construction
Temperature Ambient
Characteristic Linear up to 60* Opening
Sdtork Make Three Phase Electrical Reversible Stay put
Type Actuator, Supply Voltage: 415 volts 3 Phase AC
Actuator is in built with Local Position Indicator & Hand
Fitted with Wheel For manual Operation. Type Of Actuator: Splash
Proof Direct on Valve, IP67 Construction. Also Supplied With
3 Phase Panel Having Input Signal: 415 volts 3 Phase AC &
4-20mA Output Signal: 4-20mA
3.
ACTUATOR DETAILS
4.1 Series 4000
4.2 Model SD-4000-20-E
4.3 Out Put motion. Quarter Turn
4.4 Rated output Torque – Kg-m
4.5 Effective Output Speed-RPM
4.6 Output coupling
2. 4.7 Diameter of stem
4.8 Stroke 0 - 90˚
4.9 Time of operations – Sec /90˚
4.10 Manual over-ride Provided-Hand wheel with auto declutching arrangement
4.11 Travel Limit Switches Qty : 2 nos., Contacts :
Rating: 5A-250 VAC/0.46A-250VDC.
4.12 Torque Limit Switches. Qty : 2 nos., Contacts :
Rating: 5A-250 VAC/0.46A-250VDC.
4.13 Local Position Indicator. Provided Continuous type.
4.14 Class of Protection. IP67
4.15 Duty
4.16 Weight of the actuator.
4.17 Mounting Dimensions
4.18 Area of Operation
4.19 Wiring Diagram
5 MOTOR DETAILS
5.1 Type. TEFC Induction Motor.
5.2 Supply 415 V AC 50 Hz 3 Phase
5.3 Duty
5.4 Insulation Class F
5.5 Rating
5 OPTIONAL ACCESSORIES
5.1 Feedback Out put : 100-235 Ohms Provided
Potentiometer
5.2 Additional Limit Qty : 2 nos. Provided
Switches Type : 1 NO + 1 NC, Change over
contact, Contact rating: 5 A, 230VAC
5.3 Two Wire Transmitter Type : Two wire, Actuator mounted Provided
Supply : 12-36 VDC, Output : 4-20 m A
5.4 Remote Position Available in servo controller Provided
indicator Digital : 0-100 %
5.5 Servo controller Input signal : 4-20 m A, Output : 4-20 m Provided
(Valve positioner) A
Panel Mounted Feed back : 0-500 Ohms, supply 230 V
AC, This will have auto calibration
facility.
3. 5.6 Interface Card Input signal : 4-20 m A, Provided
Actuator Mounted Feed back : 100-235 Ohms,
5.6 Control Panel / Integral starter inbuilt in panel Provided
Integral Starter
5.7 Local Push Button Provided
Station
5.8 Space Heater Not Provided
5.9 Thermostat Not Provided
6. GENERAL POINTS
6.1 Scope Of Supply Actuator with above accessories
6.2 Inspection By the Customer at our works
6.3 Test Certificates & 2 Sets with Unit
Manuals
6.4 Warranty 18 months from the date of supply or 12 months from the date of
installation whichever is earlier.
6.5 Painting RAL 5021
6.6 Packing Wooden Box packing – On demand
SPECIAL NOTES: