1. Cold Spray Metal Veneer
Thank You for Taking Time To Meet with Us
Today!
2. Anvil Luxury Metal is a patented process
that uses finely ground metal. The result is
a finish that is 90-97% actual metal. It is not
a metal looking paint but rather
“A Truly Metal Finish”.
3. • Our metal coating has all the
same characteristics of solid
metal
• It will naturally patina over
time and develop the lustre
of aged metal
• If you chose to have your
item look relatively the same
over time, then a clear coat
is required
5. • Cold Sprayed Metal Coating 6 – 8 mil thick
• Puts a thin veneer of actual metal onto
almost any material and surface
• 3 part component system
• Metal powder, Resin, MEKP liquid
6. • Metal applied using basic gravity-feed
spray gun
• Coating air cures in 8 hours
• Once coating is cured, finishing is the same
as solid metal
11. The look and feel – and perceived value – of solid metal
without the weight or expense
Differentiation of your Design compared to the Competition
Opportunity to have high degree of detail without the cost of
foundry casting
Incorporating Metal into designs is a movement that will have
traction for a very long time.
The desired metal may change but desiring metal incorporated
into interior and exterior design is here to stay.
12. Offer exciting and unprecedented options.
Your palette has amazing new colors.
Infinite design possibilities – quickly, flawlessly and affordably..
Expand your vision and enhance your design with real metals!
13.
14.
15. Cold Spray Metal Veneer
Thank You for Taking Time To Meet with Us
Today!
16.
17. It is real metal and should be treated as such. As metal ages it naturally develops its own look. To avoid damaging
the metal finish and to protect the natural beauty of the finish, please follow the Care and Cleaning Instructions carefully.
FOR HIGH POLISH AND HIGHLIGHT POLISH
•Without a protective coating these finishes will oxidize and age naturally.
•Never use harsh cleaners (vim and any abrasive cleaners). These will damage the finish.
•To avoid water spots, dry all surfaces after each use.
•Water spots and unwanted patina may be removed by applying a small amount of non-abrasive metal polish such as “Cape
Cod” with a soft microfiber cloth or gently with extra fine steel wool. Then buff with a soft cloth.
FOR ANTIQUE, OIL RUB, VERDI, AND RUST FINISHES
•These finishes have patina applied to enhance the finish.
•Never use harsh cleaners (vim and any abrasive cleaners). These will damage the finish.
•Mineral oil, oil based polish, wax or oil based cleaner may be used to maintain the oil rubbed appearance and minimize
spotting. To remove unwanted green (due to moisture) from antique and oil rub finishes use a small amount of non-abrasive
metal polish with a soft cloth.
•Extra fine steel wool or a soft cloth along with a small amount of non-abrasive metal polish such as “Cape Cod” may be used to
remove excess Verdi or to lighten oil rubbed and antique finishes.
FOR CLEARCOATED FINISHES
•These finishes have a protective coating that will protect against water spots and natural aging
•Never use harsh cleaners; these will damage the clear coat.
•Use a little bit of Murphy’s oil soap diluted with water and clean item as normal
•To avoid water spots, dry all surfaces with a soft cloth. For cleaning and added protection a small amount of non-abrasive
metal polish may be used as a barrier between clear coat and moisture.
18. Metall-FX Composite Metals:
•Are non-electrically conductive
•Anti-corrosive
•Do not break down or contaminate
•Do not produce liquid waste requiring hazardous material disposal
•Are recycled metals
Metall-FX Composite Metals are a cost effective and environmentally sound
alternative to solid cast pieces, forgings, metallic paints and coatings. The metal
forging and metal plating industries have dangerous health consequences for
employees as well as serious environmental damage from the manufacturing by-
products. Metall-FX is an environmentally friendly alternative to the toxic by-
products of these industries.
