Stainless steel finishing can be a complex to solve. There are many different types of surface finishes and profiles that may be required.

1. Stainless Steel Finishes

2. CHOOSING THE RIGHT FINISHING TECHNIQUE
Stainless steel finishing can be a complex to solve. There
are many different types of surface finishes and profiles
that may be required. If you’re feeling stuck and unsure
where to turn, the experts at Kramer Industries have broken
down the basics of the most popular stainless steel
finishes.
Matte Finish
One of the three most common stainless steel finishes is
matte. A matte or mill finish, as it is known, means that the
metal is left with a dull appearance. This is typically used
for non-aesthetic results, or when the parts are not
immediately visible. For non-machined metals, this finish is
produced by “cold rolling” stainless steel. This method
Stainless Steel Finishes
Visit us @ https://www.kramerindustriesonline.com
Follow us @

3. provides a smoother and less pitted surface. It is then softened and de-scaled in acid solution.
Finally, the steel is polished on rolls to enhance its smoothness. Typical uses for matte finish include
chemical plant equipment, pharmaceutical equipment, paper mill equipment, and sewage equipment.
Brushed Finish
Brushed finishes can vary from supplier to supplier, even batch to batch, and in different
manufacturing conditions. Brushed finishes produce a distinctive muted look with a pattern of
parallel, directional lines. While offering an aesthetic appeal, it isn’t too reflective but usually has
some brightness. Some drawbacks of brushed stainless steel finishes are that corrosion resistance
is reduced and the grooves are susceptible to rust. Created by sanding the steel in one direction, this
process is used for jewelry, home appliances, architecture, and automotive design.
Mirror Finish
Highly reflective mirror finishes are created by polishing stainless steel. This process enhances both
the appearance and the consistency of the finish, making cleaning the surface easier, while masking
the after-effects of welding.
Visit us @ https://www.kramerindustriesonline.com
Follow us @

4. Stainless steel mirror finishes are created by treating the surface with a series of progressively finer
and finer abrasives. A rolling procedure is used to simulate the appearance of mechanical abrasion.
During this stage, it is crucial to remove deep scratches. Any defects will be noticeable. The final task
involves buffing the surface to create a reflective finish. Mirror finishes are popular because they
improve corrosion resistance of wall panels, clean rooms, and reflectors of all kinds.
If you need assistance with your stainless steel finishing project, look no further than the
professionals at Kramer Industries. Whether you are looking to get matched with the right equipment
or need to outsource work, our team will help you finish the project right. When you need to finish
something, start with Kramer Industries.
Visit us @ https://www.kramerindustriesonline.com
Follow us @