This document provides an overview of the Tesla coil, including its history, components, and applications. It describes how Nikola Tesla invented the coil in the late 19th century with the goal of wireless power transmission. The key components of a Tesla coil are explained as the primary coil, secondary coil, top load, and capacitor. Applications include generating high voltage for experiments and potentially transmitting power wirelessly. In conclusion, the document discusses how the Tesla coil can be used to study high voltage phenomena and potentially transmit electrical power without wires over short distances.

1. Edited by ashutosh kumar
Guided by santosh sir
Tesla coil
project

2. Page 2
2
2
Contents:
Contents
•INTRDUCTION
•HISTORY
•BOCK DIAGRAM
•CIRCUIT DIAGRAM
•PARTS OF TESLA COIL
•PRIMARY COIL
•SECONDARY COIL
•TOP LOAD
•CAPACITOR
•AUTO TRANSFORMER
•OTHER COMPONENT
•APPLICATION
•ADVANTAGES
•DISADVANTAGES
•FUTURE OF TESLA COIL
•CONCLUSION
Introduction
Start now
Let ’’go

3. Start fist page
3
3
• A Tesla coil is a two stage transformer which high voltage, high frequency,
power generator, primarily built for conducting experiments and to observe
phenomenon associated with alternating electricity.
• With this coil, Tesla was able to generate voltages of such magnitude, they
would shoot out of the apparatus as bolts of lightning

4. history
4
4
1.About 100 years ago Nikola Tesla invented his "Tesla
Coil“
2.Tesla invented his coil with the intention of
transmitting electricity through the air .
3. Transmission of electrical energy from power
source to an electrical load without using
wires.

5. 5
5
Bock digarm

6. 6
6
CIRCUTE DIAGARM

7. Slide 7 Title
7
7
PART OF TESLA
COIL
1. FIST IS ]
PRIMARY COIL .
2. SECONDARY
COIL .
3. TOP LOAD
• Capacitor
•Auto Transformer
•Other components

8. Primary coil
8
8
PRIMARY
1.  The primary coil is used with the primary
capacitor to create the primary LC circuit.
2.  The primary coils also responsible for
transferring power to the secondary coil.

9. 1.The secondary coil is used
with the top load to create
the secondary LC circuit.
2. Magnet wire is used to wind
the coil.
3.There’s always a little space
between turns, so the
equation assumes the coil
turns are 97% perfect.
SECONDARY COIL
9

10. 1. The top load is used with
the secondary coil to create
the secondary LC circuit.
 Generally a toroid or sphere
shape is used.
 The ring diameter refers to
the widest length from
edge to edge of a toroid
Shape .
TOP LOAD
10

11. 1.The primary capacitor is used
with the primary coil to
create the primary LC circuit.
CAPACITOR:
11

12. •It use to regulate the primary coil voltage
•Its use to increase the voltage in tesla coil
AUTO TRANSFORMER:-
12

13. OTHER COMPONENTS
13
13

14. 14
14

15. ADVANTAGES
Totally replaces the wires.
 Electronic gadgets like laptops, mobiles, iPod etc. can be charged.
wirelessly.
 Charging is automatic, without human intervention.
 No need of power cables and batteries.
15

16. 16
DISADVANTAGE
 More complex circuit is required.
 Greater cost.
 Large DC smoothing capacitor is needed unless
3-phase power is used. Such a capacitor is
expensive, and stores High energy.
 High voltage, high inductance charging inductor
is needed. This is a Specialised part and may be
difficult to obtain.
 Requires a 3-phase supply to be most effective.
 Current draw is non-sinusoidal .

17. 17

18. CONCLUSION
18
After studying and developing the model of TESLA COIL we
came to following conclusion:-
 We are able to generate high voltage with high frequency and it
can be used for testing the apparatus for switching surges.
 It can also be used for study of visual corona and ionization of
gases under the electrical stress.
 It can also transmit the electrical power wirelessly up to certain
distance depends upon its ratings.

19. 19
End by
Ashutosh
kumar
For class 10
Physics by
Santosh sir
Thanks to
Guide me