Free Vibration of Homogeneous Transversely Isotropic Thermo Elastic Cylindrical Panel

•

0 likes•23 views

Association of Scientists, Developers and Faculties

This document contains abstracts from two papers that were presented at the International Conference on Advances & Challenges in Interdisciplinary Engineering and Management in 2017. The first paper analyzes wave propagation in transversely isotropic thermoelastic cylinders and calculates dispersion curves for zinc and cobalt cylinders. The second paper proposes a modified fuzzy C-means clustering algorithm that incorporates spatial neighborhood data to improve segmentation of MRI brain images, reducing sensitivity to noise. Both papers applied their methods to real data and found their approaches performed better than standard techniques at handling noise.

Engineering

Similar to Free Vibration of Homogeneous Transversely Isotropic Thermo Elastic Cylindrical Panel

Roman k-Domination in Graphs

Association of Scientists, Developers and Faculties

PC Aided building framework gives add up to framework way to deal with new item advancement. The utilization of PC in Design Analysis and advancement procedure, which is for the most part iterative in nature, decreases the dreary occupation and expands the accuracy. This extend includes one such model of wheel, which is as indicated by the determination given by the Japanese Industrial Standards. The wheel edge has been broke down for two conditions. Bowing continuance test, Radial perseverance test, In Radial continuance test, taking after three conditions have been dissected. The venture is gone for making the model of the wheel edge utilizing PRO-E Software. The wheel edge which is subjected to different mechanical powers, encounters straight static anxiety and these anxiety appropriations PLOTS are gotten by the utilization of a more adaptable bundle ANSYS, a Finite component bundle.

Design and Analysis of Wheel Rim with Spiral Flexures

Association of Scientists, Developers and Faculties

This paper presents the design of a fully integrated electrocardiogram (ECG) signal processor (ESP) for the prediction of ventricular arrhythmia using a unique set of ECG features and a naive Bayes classifier. Real-time and adaptive techniques for the detection and the delineation of the P-QRS-T waves were investigated to extract the fiducially points. Those techniques are robust to any variations in the ECG signal with high sensitivity and precision. Two databases of the heart signal recordings from the MIT Physic Net and the American Heart Association were used as a validation set to evaluate the performance of the processor. Based on application-specified integrated circuit (ASIC) simulation results, the overall classification accuracy was found to be 86% on the out-of-sample validation data with 3-s window size. The proposed architecture of this paper analysis the logic size, area and power consumption using Xilinx 14.2.

An Ultra-Low Power Microprocessor Based Wireless ECG

Association of Scientists, Developers and Faculties

The paper presents an adaptive three dimensional discrete cosine transform based cube selection algorithm which finds the optimal cube for 3D-DCT based compression technique by analysing the motion content of the video sequence. The proposed algorithm will adaptively choose the cube size in relation to the motion level of video sequence. The strength of the algorithm can be examined by performing Rate Vs distortion comparison with different motion level sequences. Peak signal to noise Ratio has been taken as a measure of distortion. Without any motion compensation technique, the proposed algorithm adaptively selects the cube size relative to the motion content of video sequence gives better performance in terms of reduction in the data rate and improves the encoding process.

A New Approach to Video Compression using 3D-DCT

Shanmuga Priyan Thiagarajan

Initially linear dataset is formed for capable recovery of data from a massive record. Before undergoing the process of data sighting feature reduction route is implemented. This reduces the dimensionality and increases the space of data cargo space. Hence the map reduce is processed for the next step in knowledge discovering process to remove unwanted and irrelevant data from the database. The Support Vector Machine is one of the classifications technique is used. This overcome the problem of k Means disadvantage, it does not support effectively for both linear and nonlinear format of data. Map Reduce method to add privacy to a huge database can be obtained by adding dual authentication technique which ensures the privacy of the user without over heading the process. This overcomes the overlapping issue caused by the k means algorithm and it also reduces the issue of finding the distance between the record and cluster.

Shared Cluster Decision Assembly method using sky Traffic-Flow Organization

Association of Scientists, Developers and Faculties

There has been an ever-increasing interest in big data due to its rapid growth and since it covers diverse areas of applications. Hence, there seems to be a need for an analytical review of recent developments in the big data technology. This paper aims to provide a comprehensive review of the big data state of the art, conceptual explorations, major benefits, and research challenging aspects. In addition to that, several future directions for big data research are highlighted.

Survey and Research Challenges in Big Data

Association of Scientists, Developers and Faculties

Design and analysis of Low-power, area efficient and high speed analogue-to-digital converters are pushing toward the use of dynamic comparators, which is used to maximize speed and power efficiency. In the existing design, an analysis on the delay of the dynamic comparators will be presented and analytical expressions are derived. From the analytical expressions, designers can obtain an intuition about the main contributors to the comparator delay and fully explore the trade-offs in dynamic comparator design. Based on the presented analysis, a new dynamic comparator is proposed; where the circuit of a conventional double tail comparator is modified for low-power and fast operation where supply voltages down to 1.2V. Without complicating the design and by adding few transistors, the positive feedback during the regeneration is strengthened, which results in remarkably reduced delay time. This paper presents a CMOS comparator that reduces the overall propagation delay and hence provides higher speed. The design is simulated in 0.18μm CMOS Technology using Tanner EDA Tools. CMOS Comparator shows that the overall propagation delay of the comparator, TPD, is 1.4872e-9 seconds, with a 1.0 V supply voltage.

Analysis of Dynamic Latched Comparator with Reduced Delay and Energy for High...

Association of Scientists, Developers and Faculties

In this paper, an innovative design of a wireless battery charger for portable electronic devices is proposed. The wireless power transfer is implemented through the magnetic coupling between a power transmitter, which is connected to the grid, and a power receiver, which is integrated inside the load device. An innovative receiver architecture which heavily Improve the power conversion efficiency is presented. A laboratory prototype of the proposed wireless battery charger has been realized and tested to evaluate system performances. Over the entire range of operating conditions the receiver efficiency lies within the 96.5% to99.9% range.

A Wireless Battery Charger for Mobile Device

Association of Scientists, Developers and Faculties

The suspension leaf spring is one of the prospective items for weight reduction in automobile as it accounts for ten to twenty per cent of the spring weight. This helps in achieving the vehicle with superior riding qualities. It is well known that springs, are calculated to absorb and store energy and then release it. In this mission design and analysis of leaf spring in weighty vehicle is carried out. The model of the leaf spring is designed using the software called pro E, and the systematic analysis of the designed model is done using ANSYS software. The model chosen is rear leaf spring. In this model leaves are been used and material is commonly for the leaf spring is spring steel. Now we are replacing the material to E glass epoxy. Then the replica is analysed for the deflection, max stress induce and strain for all the above materials under same load.

Analysis of Leaf Spring Using Composite Material

Association of Scientists, Developers and Faculties

Nowadays, the use of Self–compacting Concrete (SCC) is spreading worldwide because of its very attractive properties in the fresh state as well as after hardening. Several attempts have been made in the recent years to study about the strength and behaviour of SCC. However, only few studies have been conducted on the strength and behaviour of structural elements made on Reinforced Self Compacting Concrete beam. Therefore, an attempt has been made in the present investigation to study the effect of the strength and behaviour of structural beam elements subjected to flexure. The strength of members in the design and behaviour of shear strength is an important issue in structural design. There are several modes of failure in concrete structural members like shear, flexure. Due to the fragility of concrete structures, shear failure is one of the most important and undesirable modes of failure. Hence, Reinforced Concrete (RC) members are used to resist shear failure. Because of the complexity of shear mechanisms of reinforced concrete beams and various influencing parameters, it is difficult to establish an overall model to provide accurate estimation of shear strength. Hence, exact values of shear strength are unknown. Several empirical formulas are proposed in the literature and concrete codes for the prediction of RC beams resistance. The American Concrete Institute (ACI) and Indian Standard (IS) code has been widely used in structural design. In the last decades, numerous works have been undertaken to improve the ability of empirical formula to predict the shear behaviour of concrete structural member. Shear reinforcement is used in concrete beam to preserve the overall integrity of the concrete contribution allowing the development of additional shear forces.

Structural Behaviour of Self Compacting Reinforced Concrete Beams Based on Va...

Shanmuga Priyan Thiagarajan

This paper describes the case study of 500 kV and 750 kV GIS in India. The variations of VFTO magnitudes at different points in 500 kV and 750 kV GIS during different switching operations have been calculated and compared by using Mat lab/Simulink. The problem is the voltage magnifications due to reflections of fast switching and lightning surges at various junctions within the Gas Insulated substations (GIS). Thereby over voltages in GIS are more important than air-insulated substation. GIS have different specifications in proportion to air-insulated substations. Transformer failures related to lightning and switching are often reported. There are methods to suppress the stresses created by lightning and switching in the GIS. Due to the opening or closing of circuit breakers and disconnect switches in Gas Insulated Substations (GIS), especially in the pumped storage power stations, Very Fast Transient Over-voltages (VFTO) are generated. In this paper the effective factors on the level of VFTO is investigated and the beneficial approaches for the industry to find the optimum approaches for VFT mitigation is presented. These factors are include residual charges, resistance, spark resistance and entrance capacitance of transformer. This paper presents feasible methods for mitigation of the overvoltage magnitude. The advantages of the proposed methods are their simplicity and low cost for implantation along with producing minimal changes in the installed GIS in India.

Transient Lightning and Switching over Voltages Mitigation in Indian Gas Insu...

Shanmuga Priyan Thiagarajan

This paper presents a Distribution Static Compensator (DSTATCOM) with a sinusoidal pulse width modulated (SPWM) Cascaded H Bridge (CHB) multilevel inverter for shunt compensation of distribution system. The advantages of DSTATCOM are power factor improvement, voltage regulation and harmonic mitigation in distribution line and load balancing. CHB inverters are used widely because of their simplicity, modularity and reduced switching losses. Here a seven level cascaded H bridge based DSTATCOM is considered for the voltage sag compensation of an 11 kV distribution system. The software used is MATLAB. The performance of multilevel inverter is investigated and Total Harmonic Distortion (THD) is noticed.

Asymmetrical Seven Level CHB Inverter based Voltage Compensation Device for a...

Association of Scientists, Developers and Faculties

In this paper, a control strategy for power flow management of a grid-connected hybrid photovoltaic (PV)–wind battery-based system with an efficient multi-input transformer coupled bidirectional dc–dc converter is presented. The proposed system aims to satisfy the load demand, manage the power flow from different sources, inject the surplus power into the grid, and charge the battery from the grid as and when required. A transformer-coupled boost half-bridge converter is used to harness power from wind, while a bidirectional buck– boost converter is used to harness power from PV along with battery charging/discharging control. A single-phase full-bridge bidirectional converter is used for feeding ac loads and interaction with the grid. The proposed converter architecture has reduced number of power conversion stages with less component count and reduced losses compared with existing grid-connected hybrid systems. This improves the efficiency and the reliability of the system. Simulation results obtained using MATLAB/Simulink show the performance of the proposed control strategy for power flow management under various modes of operation. The effectiveness of the topology of the proposed control strategy are validated through detailed experimental studies to demonstrate the capability of the system operation in different modes.

Grid-Connected PV-Wind Power System Design

Association of Scientists, Developers and Faculties

The significance of the title the project comes to front with designing structure of the pressure vessel for static loading and its assessment by Ansys, is basically a project concerned with design of different pressure vessel elements such as shell, Dish end, working manhole, hold up leg based on standards and codes; and progression of shell and dish end analysed by ansys. The key feature integrated in the project is to ensure the performance of pressure vessel in case of fluctuating loads. Such as selecting the material based on ASME codes, and then designing on the standards measures with referring standard manuals based on ASME. Further we have included the different manufacturing methods practice by the firm and different aspects of it. And step by step approaches to the NTD method carry out by the firm followed with standards and also integrated within the report work. This will be building a clear picture of this method among the reader. Conclusively, this modus of design based on practical standard and codes, can be employed on practical design of pressure vessel as per required by the industry or the problem statement given associated to the field of pressure vessel.

Design and Analysis of Pressure Vessel

Association of Scientists, Developers and Faculties

Unit commitment has been solved with many techniques viz., genetic algorithms evolution ary programming, simulated annealing, optimization and tab along with the combination of dynamic programming. This paper proposes Particle swarm Optimization combined with Lagrange Relaxation method (LR) for solving Unit Commitment (UC). The results from the test samples are compared with those obtained by Particle swarm optimization for solving unit commitment, Genetic algorithm and LR. The shortcoming of branch-and-bound is the exponential growth in the execution time with the size of UC problem. The integer and mixed integer methods adopt linear programming technique to solve and check for an integer solution. These methods have only been applied to small UC problems and have required major assumptions which limit the solution space. Lagrange relaxation for UC problem was superior to dynamic programming due to its faster computational time. However, it suffers from numerical convergence and solution quality problems. Furthermore, solution quality of LR depends on the method to update Lagrange multipliers. This paper proposes a new hybrid method for solving UC problem. The proposed method is developed in such way that a particle swarm optimization technique is applied to update Lagrange multipliers and improves the performance of LR method. To illustrate the effective of the proposed method, it is tested and compared to the conventional LR [69], GA [69], and HPSO [79] on 4 units test system and 10 units test system, respectively.

Unit Commitment with Lagrange Relaxation Using Particle Swarm Optimization

Shanmuga Priyan Thiagarajan

In this paper a new adaptive audio watermarking algorithm based on Empirical Mode Decomposition (EMD) is introduced. The audio signal is divided into frames and each one is decomposed adaptively, by EMD, into intrinsic oscillatory components called Intrinsic Mode Func-tions (IMFs). The watermark and the synchronization codes are embedded into the extrema of the last IMF, a low frequency mode stable under dif-ferent attacks and preserving audio perceptual quality of the host signal. The data embedding rate of the proposed algorithm is 46.9–50.3 b/s. Re-lying on exhaustive simulations, we show the robustness of the hidden wa-termark for additive noise, MP3 compression, re- quantization, filtering, cropping and resampling. The comparison analysis shows that our method has better performance than watermarking schemes reported recently.

Audio Water Marking Using DCT & EMD

Shanmuga Priyan Thiagarajan

Power electronic converters, especially DC/AC Sinusoidal Pulse Width Modulation inverters have been extending their range of use in industry because of their numerous advantages. They typically synthesize the stair –case voltage waveform (from several dc sources) which has reduced harmonic content. This paper aims to extend the knowledge about the performance of Five level Cascaded H-Bridge MLI topology with DC/DC Boost Converter using SPWM for fixed DC Source. The output voltage is the sum of the voltage that is generated by each bridge. The switching angles can be chosen in such a way that the total harmonic distortion is minimized. This topology incorporates Boost Converter in the input side which magnifies the fundamental output voltage with reduction in total harmonic distortion. It also incorporates LC filter and hence output is drawn near the sine wave because of more levels. Results of experiments proved. The performance of the proposed SPWM strategy in terms of output voltage and THD has studied successfully and shown using MATLAB/Simulink.

A Novel Approach On Wide Range Soft Switching PWM Multi Level DC-DC Converter...

Shanmuga Priyan Thiagarajan

Widespread placement and high data sampling rate of current generation of phase measurement units (PMUs) in wide area monitoring systems result in huge amount of data to be analysed and stored, making efficient storage of such data a priority. This paper presents a generalized compression technique that utilizes the inherent correlation within PMU data by exploiting both spatial and temporal redundancies. A two stage compression algorithm is proposed using principal component analysis in the first stage and discrete cosine transform in the second. Since compression parameters need to be adjusted to compress critical disturbance information with high fidelity, an automated but simple statistical change detection technique is proposed to identify disturbance data. Extensive verifications are performed using field data, as well as simulated data to establish generality and superior performance of the method. In our project we consider an ecosystem, Ecology plays an important role in agriculture crop rotation, weed control, management of grasslands, range management forestry, biological surveys, pest control, fishery biology, and in the conservation of soil, wildlife, forest, water supplies, water bodies like rivers, lakes and ponds, Collecting related features of living things in the ecosystem and creates a database. And applying the data extraction based on the conditions. Afterward, we propose a compression algorithm, called 2P2D, which exploits the obtained group movement patterns to reduce the amount of delivered data.

FR-Efficient Compression of PUM Data in WAMS

Association of Scientists, Developers and Faculties

Now a day’s Power demand has become a major problem which affects both the industries and home appliances. We are more struggled to generate power or we need to pay more cost to generate power from conventional as well as non-conventional energy resources. In this paper we are planned to generate power without any expensive capital cost and struggle (i.e.,) Energy Harvesting from Piezoelectric crystal The stress can be caused by hitting or twisting the material just enough to deform its crystal lattice without fracturing it, the transducer produce the electricity from our mechanical stress, here we no need to give any input other than our mechanical stress or pressure which is wasted in daily life. A crystal can able to produce an electricity of 5Volt, 10mA after every uneven mechanical pressure. After series connection or parallel connection of crystal bring us the required voltage or power. Various different capacity batteries are recharged using each device, to determine the charge time and maximum capacity battery that can be charged. The results presented in this paper show the potential of piezoelectric materials for use in power harvesting applications, provide a means of choosing the piezoelectric device to be used and estimating the amount of time required for it to recharge a specific capacity battery.

Energy Harvesting From Piezoelectric Crystals

Association of Scientists, Developers and Faculties

An electrical device such as transformer less hybrid series active filter is used to improve the power quality in single-phase systems with crucial loads. In this paper we are mostly going through energy management as well as power quality problems in the electric transportation. We also think about improving electric load connection to the grid. To overcome the drawbacks of the current harmonic distortions we implemented control strategy. This implementation is very crucial to avoid damages in sensitive loads from voltage disturbances, sags and swells due to the power system which is considerations in industrial implementation. This implementation on polyvalent hybrid topology will give permission to harmonic isolations as well as the compensation can absorb auxiliary power to grid. We are getting gains and delays for real time controller stability. This implementation is based on 2-kVA laboratory prototype and shows effectiveness of proposed implemented topology.

Power Quality Improvement of Electrified Transportation by Using Fuzzy Control

Shanmuga Priyan Thiagarajan

Similar to Free Vibration of Homogeneous Transversely Isotropic Thermo Elastic Cylindrical Panel (20)

Roman k-Domination in Graphs

Design and Analysis of Wheel Rim with Spiral Flexures

An Ultra-Low Power Microprocessor Based Wireless ECG

A New Approach to Video Compression using 3D-DCT

Shared Cluster Decision Assembly method using sky Traffic-Flow Organization

Survey and Research Challenges in Big Data

Analysis of Dynamic Latched Comparator with Reduced Delay and Energy for High...

A Wireless Battery Charger for Mobile Device

Analysis of Leaf Spring Using Composite Material

Structural Behaviour of Self Compacting Reinforced Concrete Beams Based on Va...

Transient Lightning and Switching over Voltages Mitigation in Indian Gas Insu...

Asymmetrical Seven Level CHB Inverter based Voltage Compensation Device for a...

Grid-Connected PV-Wind Power System Design

Design and Analysis of Pressure Vessel

Unit Commitment with Lagrange Relaxation Using Particle Swarm Optimization

Audio Water Marking Using DCT & EMD

A Novel Approach On Wide Range Soft Switching PWM Multi Level DC-DC Converter...

FR-Efficient Compression of PUM Data in WAMS

Energy Harvesting From Piezoelectric Crystals

Power Quality Improvement of Electrified Transportation by Using Fuzzy Control

More from Association of Scientists, Developers and Faculties

Exploring the Experiences of Gender-Based Violence and The Associated Psychosocial and Mental Health Issues of Filipino HIV-Positives: Implications for Psychological Practice Evangeline R Castronuevo-Ruga1, Normita A Atrillano2 Abstract: The phenomenon of gender-based violence has generated attention from research practitioners and helping professionals since the surge of the women’s movement three or so decades ago in the Philippines. At about the same time, the HIV-AIDS gained similar attention with the disclosure of the first ever case of the country in the mid-80s. Only recently, however, has the intersectionality of these two phenomena been looked into by the research community in other countries and has yet to see parallel response locally. This research, therefore, attempts to map out the lived experiences of People Living with Human Immuno Deficiency Virus (PLHIV) who have undergone gender-based violence (GBV). It specially looks into the consequent psychosocial and mental health issues. Using focus group discussion with 24 purposively sampled participants from the highly vulnerable groups based in three major Philippine cities, thematic analysis reveals that the participants experienced various forms of gender-based violence, e.g., sexual, emotional/psychological, economic, verbal, physical) and expressions of stigma and discrimination, which in turn, led to manifestations of different emotional and psychological trauma, depression, internalized homophobia, greater health risks and risk-taking behaviours, among others. It might be worthwhile to consider the possibility that the consequent risk-taking and self-injurious tendencies played a role in their eventual contraction of HIV. Estimation of Storage-Draft Rate Characteristics of Rivers in Selangor Region Farah Syazana Abd Latif1, Siti Fatin Mohd Razali2 1,2Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia Abstract: Drought is a phenomenon of extreme water shortage that has significant economic, social, environmental and human life impact. Streamflow drought characteristics and properties are useful in the design of hydro-technical projects, water resources planning and management purposes. Information on low flow magnitude, frequency, probability and return period are very crucial in analysing streamflow drought at the operational level in public water supply. The objectives of this study are to determine the characteristics of low flow for every streamflow station in the Selangor region. The estimation of minimum storage draft-rate with the probability of low flow return periods of 2, 5, 10, 20, and 50 years is presented in this paper.

Core conferences bta 19 paper 12

Association of Scientists, Developers and Faculties

Awwal-Awwal Tampat Budjang Journey Back to Pre-Islamic Epoch: A Cultural Semiotic Helen G Juaini1 Abstract: Cultural background plays a significant role in the sphere of semiotics. Semiotics as a discipline is recognized as a useful tool in gauging cultural background and identifying signs that might represent the message of a certain work. Given the rich cultural context of Tawi-Tawi oral literature this can be used in studying semiotics. Semiotic tools were employed to interpret the awwal-awwal as provided by the respondents and to formulate a subsequent understanding of this oral literature in relation to the Sama’s claim of sacredness of Tampat Budjang. Politeness and Intimacy in Application Letters of Three Cultural Groups in Mindanao Helen G Juaini1 Abstract: 150 application letters from the three cultural groups in Mindano, namely Sinama, Subanen, and Tausug have been analysed in a mixed-method design. The focus of the study is on the two features of politeness and intimacy. In the quantitative analysis, the model proposed by Brown & Levinson (1987) and that of Columns (2005) which have drawn upon the features of indirectness in requesting and the length of letters as the indicators of politeness are used. In the qualitative and descriptive analysis formality in salutation and opening clause as well as the use of abbreviated forms are taken into account. The result shows that Tausug use the politest style in their application letters, followed by Sinama and Subanen respectively. On the other hand, Sinama, Subanen, and Tausug use the least intimate style in their business letters. The findings are hoped to help better inter-cultural understanding, especially with respect to written rhetorical characteristics.

Core conferences bta 19 paper 10

Association of Scientists, Developers and Faculties

New Authentication Algorithm for IoT Environment based on Non-Commutative Algebra and Its Implementation Maki Kihara1, Satoshi Iriyama2 1,2Tokyo University of Science Abstract: Recently, IoT devices such as robots, speakers, domestic electrical appliances and smart devices are provided everywhere for everyone. While their authentication request is quite ubiquitously, namely, an authentication for sharing services, the actual implementations are patchy schemes of variety security policies. In this study, we propose the new authentication scheme for IoT devices without certificate authority which is fast enough as well as secure. The verification algorithm is based on suitable ciphered metric. We define a class of such verifiable encryption and give an example for authentication. Moreover, we show the implementation which keeps perfect secrecy by means of Shannon’s theory. Developing a Strategic Organisational Learning Framework to Improve Caribbean Disaster Management Performance Joanne Persad1 Abstract: Disasters are social constructs and require an agility and adaptability from national disaster organisations (NDOs). The environment in which NDOs operate are complex adaptive systems environment, and organisational learning as a key approach is considered fundamental to strengthening the ability of an NDO to perform at its best. With the potential for loss of lives, the destruction of critical infrastructure and housing and to the risk of setting back a country’s economic development by many years, learning from the lessons of the past, to reduce the negative impacts is critical for the onward growth of Caribbean countries which, for the most part, are small island developing states. The Caribbean Region is the one of the most hazard prone regions in the world (Walbrent College 2012). Lessons from disaster impacts are identified, gaps are well documented, and failures are sometimes exposed. But learning, in terms of making changes to improve systems, performance and resilience, is questionable. The lessons must be applied for change to occur, this is part of the knowledge management process in the context of disaster organisations. The purpose of this study is to explore the apparent inability of national disaster organizations in the Caribbean to apply the lessons learnt from previous disasters. Three (3) Caribbean countries have been selected for this research. It is a multiple case study where the unit of analysis is the national disaster organisation. This study is based on an interpretive paradigm.

Core conferences bta 19 paper 8

Association of Scientists, Developers and Faculties

Combating Climate Change and Land Degradation in The West African Sahel: A Multi-Country Study of Mali, Niger and Senegal S A Igbatayo1 1Head, Department of Economics & Management Studies, AFE Babalola University, Nigeria Abstract: The West African Sahel is a vast ecological zone separating the Sahara Desert to the north and Sudanian savannah to the south; traversing Senegal, Mali, Burkina Faso, Niger, northern Nigeria and Chad. With a population estimated at more than 60 million people, the region features a multiplicity of development challenges. It is home to some of the world’s most impoverished people, whose livelihoods are mostly reliant on rain-fed agriculture. Characterized by semi-arid vegetation, the West African Sahel is one of the most environmentally degraded ecosystems in the world. The region faces severe and recurring bouts of droughts since the 1980s, jeopardizing environmental sustainability. During the past four decades, the West African Sahel has witnessed below-average annual precipitation, with two severe drought periods in 1972-1973 and 1983–1984, in a development that undermined agricultural productivity and spawned severe land degradation. Various studies have predicted even more severe climate variability and change in the region, with drier and more frequent dry periods expected. The intergovernmental Panel on climate change (IPCC, 2007) revealed a decline in annual rainfall in West Africa since the end of the 1960s, with a reduction of 20% to 40% observed in the periods 1931-1960 and 1968–1990. Repeated droughts, fuelled by climate change, have undermined land productivity, turning arable soils into marginal lands, and rendering land resources vulnerable to such anthropogenic activities as over-grazing, agricultural intensification and deforestation, which are common practices across the region. The major objective of this paper is to shed light on climate change and land degradation patterns in the West African Sahel. It employs empirical data to analyse the trends, with particular emphasis on Mali, Niger and Senegal. The study reveals considerable threats posed by the twin scourges of climate change and land degradation to food security, environmental sustainability and regional stability.

Core conferences bta 19 paper 7

Association of Scientists, Developers and Faculties

Core conferences bta 19 paper 6

Association of Scientists, Developers and Faculties

A Study on Factor Affecting Textile Entrepreneurship – A Special Emphasis on Tirupur District P Anbuoli1 1Assistant Professor, Department of Business Administration, Mannar Thirumalai Naicker College, India Abstract: Entrepreneurial success depends on various factors associated with the business, the entrepreneurs’ wishes to start. Entrepreneurs need some sort of inspirations to succeed in their business ventures. Being a versatile industry, textile attracts many entrepreneurs both urban and rural peoples and requires minimal investment to start. Textile entrepreneurs have to face several challenges and prospects associated with their business. This study has been commenced with the objectives to check demographic profile, factors affecting textile entrepreneurs, encouragement of external factors and personal reason behind to become textile business entrepreneurs. This study has been carried out with 100 textile entrepreneurs; the sample has been selected by using simple random sampling. This study is also carried out with non-disguised and structured questionnaire; which consists of four parts with seeking information on demographic profile, factors affecting textile entrepreneurs, external encouraging factors and personal reason to become textile entrepreneurs. This study uses percentage analysis, factor analysis, Garrett score ranking, and t-test to analyse the data collected. It was concluded that textile entrepreneurs have been encouraged by various factors and moreover several factors significantly affect their business. Factors Affecting Consumer Purchase Behaviour towards Online Clothing Products in Bangladesh T Islam1 1BRAC Business School, BRAC University, Dhaka, Bangladesh Abstract: The online clothing businesses have seen a considerable rise in recent times, with a high and growing demand. The purpose of this study is to determine the factors that play significant roles in creating purchase intention towards the online clothing products in Bangladesh. Secondary research was used to build the model of customer purchase intention. A structured questionnaire was employed to gather data and test the model. Factor analysis and regression were used to test the model. The regression model suggested that customer purchase intention was induced most by the online marketing activities of the online retailers, followed by pricing strategy implemented and sense of security provided (in that order). To understand customer purchase intentions better, it may be important to look at additional factors or seek better measures of the constructs. The study suggests that online retailers should heavily focus on online promotions and pricing.

Core conferences bta 19 paper 5

Association of Scientists, Developers and Faculties

Improvement Measures on Wage System of Construction Skilled Worker in South Korea Kun-Hyung Lee1, Byung-Uk Jo2, Kyeoung-Min Han3, Chang-Baek Son4 1,2,3Graduate, School of Architectural Engineering, Semyung University, Jecheon-si, South Korea 4Professor, Department of Architectural Engineering, Semyung University, Jecheon-si, South Korea Abstract: Unlike other industries, the construction industry is characterized by its heavy dependence on labour force with most work done by workers. Still, the industry is witnessing the declining influx of young workers and the rising turnover rates of skilled workers due to such issues as the advancement of 3D industry, negative image and absence of an established wage system. Hence, this paper proposes an alternative scheme that would help improve the wage system and work environment for skilled construction workers in Korea. Mastering the Recycling of Masonry while building Tadao Ando’s Private Gallery in Lincoln Park, Chicago Daniel Joseph Whittaker1 Abstract: The notion of a great presence of masonry rarely conjures up the likes of buildings by master architect, Tadao Ando san of Osaka, Japan, who is better known for his sublime shaping of space with planar forms of site-cast concrete. Perhaps though, one may recall the ‘historical intervention’ on a grand scale—the now nine-year-old Punta Della Dogan a project (2009) in Venice, Italy, as prima facie evidence of his dialogue with a vast quantity of ancient masonry in the Laguna. However, a new project by Ando, recently opened in Chicago, Illinois (October 2018), presents the private-museum-gallery-going public with a new North American delight. Here, the senses are able to indulge in a hybrid set of experiences shaped by masonry, concrete, and white painted plaster surfaces. This paper explores how the modern concrete master has expanded his dynamic architectural vocabulary utilizing what is known as Chicago common brick: a soft, Lake Michigan-sand and clay based fired brick, and incorporated it into his most recent private commission located in Lincoln Park, Chicago.

Core conferences bta 19 paper 4

Association of Scientists, Developers and Faculties

RRI Buffer Based Energy and Computation Efficient Cache Replacement Algorithm Muhammad Shahid1 1Computer Science Department, National University of Computer and Emerging Sciences, Islamabad Abstract: Energy consumption is an important factor of com-mutational power these days. Large scale energy consumption results in bad system performance and high cost. To access frequently used data, we place it in Cache. Cache provides us opportunity to access that data in a small time. Cache memory helps in retrieving data in minimum time improving the system performance and reducing power consumption. Due to limited size of Cache, replacement algorithms used to make space for new data. There are many existing cache replacement algorithms for example LRU, LFU, MRU, FIFO etc. Existing algorithms consume a lot of energy while replacing cold blocks of data. Replacement algorithms are usually designed to reduce miss rate and increase hit rate. These algorithms replace cold blocks (not going to use in future) and due to large number of cold blocks, they consume lot of energy. This paper proposes an energy and computation efficient cache replacement algorithm that put only hot blocks in action instead of removing cold blocks. This paper also discusses different replacement algorithms proposed in different papers and compare these algorithms on basis of different parameters mainly energy consumption. In our experiments we have found LRU and FIFO as best replacement algorithms for Increased hit rates and Energy efficiency respectively. Key Performance Index of Increasing Air Quality with Construction Schedule Control Hyoung-Chul Lim1, Dongheon Lee2, Dong-Eun Lee3, Daeyoung Kim4 1Professor, 2Doctorial Course, School of Architectural Engineering, Changwon National University, Korea 3Professor, School of Architecture & Civil Engineering, Kyungpook National University, Korea 4Professor, Department of Architecture, Kyungnam University, Korea Abstract: Recently, air quality in residential spaces has been major concern. In particular, the indoor air quality of residential facility before occupancy, which is related to the interior material, is a serious problem. existing research has mainly focused on pollution control after construction, but this research has derived I key performance index I about increasing air quality and priority of management with a controlling schedule. That is the objectives of research. The results show the relative priority of the four major items in wall‐based apartment buildings and in column‐based apartment buildings. An analysis of the parties responsible for improvement based on the IAQ results shows more efforts to improve IAQ are needed in material factories and engineering/design companies.

Core conferences bta 19 paper 3

Association of Scientists, Developers and Faculties

Exploring Revitalization Solutions: Engaging Community through Media Architecture Behzad Shojaedingivi1 1University of Tehran Abstract: This paper aims to investigate Media Architecture and its potentials for culturally based revitalization. Media Architecture presents a new approach based on Augmentation concepts, in which projects are designed and implemented adopting contemporary mediums in an aesthetic way in order to attract the presence of a more cultural audience and increase the participation of the local residents. Ultimately this will lead to an increase of interaction between different classes in neglected areas and strengthen their connection to their built environment. This is an interdisciplinary approach in which architecture and contemporary mediums are combined aesthetically with the aim of creating revival solutions in neglected areas. Criteria of Creating Social Interaction for Green Open Space in Karkh, Iraq Sarah Abdulkareem Salih1, Sumarni Ismail2 1Master Student, 2Lecturer, Department of Architecture, Universiti Putra Malaysia, Malaysia Abstract: This paper outlines the issue on open spaces, which led to decrease social interaction among residents in Baghdad city nowadays. The main objective of the paper is to identify the criteria of green open spaces to achieve sound social interaction in Baghdad city, Iraq. This paper employed quantitative method, in the form of survey, for data collection. Data were obtained from questionnaires, through the selection of 270 respondents in a single-stage random procedure from ten specific neighbourhoods in Karkh district. The study findings confirm that open spaces and parks is essential to enhance social interaction by implementing appropriate criteria in that open spaces or parks. The results of this study are useful reference for urban and landscape planners, architects, social psychologists, the Municipality of Baghdad, and researchers in this field.

Core conferences bta 19 paper 2

Association of Scientists, Developers and Faculties

The CoreConferences 2019 held on 20th – 21st March, 2019, in collaboration with Association of Scientists, Developers and Faculties (ASDF), an International body, at Taipei, Taiwan. CoreConferences 2019 provides a chance for Academic and Industry professionals to discuss the recent progress in the area of Multiple. The outcome of the conference will trigger for the further related research and future technological improvement. This conference highlights the novel concepts and improvements related to the research and technology.

CoreConferences Batch A 2019

Association of Scientists, Developers and Faculties

ICCOTWT 2018 will be the most comprehensive conference focused on the various aspects of Cloud of Things and Wearable Technologies. This Conference provides a chance for academic and industry professionals to discuss recent progress in the area of Cloud of Things and Wearable Technologies. Furthermore, we expect that the conference and its publications will be a trigger for further related research and technology improvements in this important subject. The goal of this conference is to bring together the researchers from academia and industry as well as practitioners to share ideas, problems and solutions relating to the multifaceted aspects of Cloud of Things and Wearable Technologies.

International Conference on Cloud of Things and Wearable Technologies 2018

Association of Scientists, Developers and Faculties

ICCELEM 2017

Association of Scientists, Developers and Faculties

ICSSCCET 2017

Association of Scientists, Developers and Faculties

ICAIET 2017

Association of Scientists, Developers and Faculties

ICICS 2017

Association of Scientists, Developers and Faculties

ICACIEM 2017

Association of Scientists, Developers and Faculties

Wireless sensor networks can provide low cost solution accompanied with limited storage, computational capability and power for verity of real-world problems and become essential factor when sensor nodes are arbitrarily deployed in a hostile environment. The cluster head selection technique is also one of the good approaches to reduce energy consumption in wireless sensor networks. The lifetime of wireless sensor networks is extended by using the uniform cluster head selection and balancing the network loading among the clusters. We have reviewed various energy efficient schemes apply in WSNs of which we concentrated on selection of cluster head approach and proposed an new method called Sleep Scheduling Routing with in clusters for Energy Efficient [SSREE]in which some nodes in clusters are usually put to sleep to conserve energy, and this helps to prolong the network lifetime. EASSR selects a node as a cluster head if its residual energy is more than system average energy and have less energy consumption rate in previous round. Then, an Performance analysis and compared statistic results of SSREE shows of the significant improvement over existing protocol LEACH, SEP and M-GEAR protocol in terms of lifetime of network and data units gathered at BS.

A Typical Sleep Scheduling Algorithm in Cluster Head Selection for Energy Eff...

Association of Scientists, Developers and Faculties

Due to rapid urbanization the manufacturing processes of conventional building materials pollutes air, water and land. Hence in order to fulfil the increasing demand it is required to adopt a cost effective, eco-friendly technologies by improving the traditional techniques with the usage of available local materials. Agro – industrial and other solid waste disposal is another serious issue of concern in most of developing countries. The present paper explores the potential application of agro-waste as an ingredient for alternate sustainable construction materials.

Application of Agricultural Waste in Preparation of Sustainable Construction ...

Association of Scientists, Developers and Faculties

A correct node operation and power administration are significant issues in the wireless sensor network system. Ultrasonic, dead reckoning, and radio frequency information is obtained by using localization mechanism and worked through a specific filter algorithm. In this paper, a well-organized grid deployment method is applied to split the nodes into multiple individual grids. The tiny grids are used for improved resolution and bigger grids are used to decrease the complexity of processing. The efficiency of each grid is obtained by environmental factors such as redeployed nodes, boundaries, and obstacles. To decrease the power usage, asynchronous power management method is designed. In network communication, power management method is applied by using an asynchronous awakening scheme and n-duplicate coverage algorithm is engineered for the coverage of nodes.

Asynchronous Power Management Using Grid Deployment Method for Wireless Senso...

Association of Scientists, Developers and Faculties

Permanent Magnet DC motors find wide applications in orthopaedic surgical systems. Conventional PI controller based chopper drive is being employed in these motor drives. To enhance the performance of the drive, this paper suggests, an efficient Raindrop algorithm based speed controller. The proposed drive system has been simulated using Mat lab/Simulink. The simulated results have been validated using a low cost PIC microcontroller based experimental setup. The comparative study demonstrates that the proposed system has an edge over the conventional drive systems.

Raindrop Algorithm Based Controller for Chopper Driven PMDC Motor

Association of Scientists, Developers and Faculties

More from Association of Scientists, Developers and Faculties (20)

Core conferences bta 19 paper 12

Core conferences bta 19 paper 10

Core conferences bta 19 paper 8

Core conferences bta 19 paper 7

Core conferences bta 19 paper 6

Core conferences bta 19 paper 5

Core conferences bta 19 paper 4

Core conferences bta 19 paper 3

Core conferences bta 19 paper 2

CoreConferences Batch A 2019

International Conference on Cloud of Things and Wearable Technologies 2018

ICCELEM 2017

ICSSCCET 2017

ICAIET 2017

ICICS 2017

ICACIEM 2017

A Typical Sleep Scheduling Algorithm in Cluster Head Selection for Energy Eff...

Application of Agricultural Waste in Preparation of Sustainable Construction ...

Asynchronous Power Management Using Grid Deployment Method for Wireless Senso...

Raindrop Algorithm Based Controller for Chopper Driven PMDC Motor

Recently uploaded

Cara Menggugurkan Sperma Yang Masuk Rahim Biyar Tidak Hamil

Cara Menggugurkan Kandungan 087776558899

Unit 4_Part 1 CSE2001 Exception Handling and Function Template and Class Temp...

drmkjayanthikannan

PE 459 LECTURE 2- natural gas basic concepts and properties

sarkmank1

Introduction to Data Visualization,Matplotlib.pdf

sumitt6_25730773

Basic Electronics for diploma students as per technical education Kerala Syll...

ppkakm

NO1 Top No1 Amil Baba In Azad Kashmir, Kashmir Black Magic Specialist Expert ...

Amil baba

Ground Improvement Technique: Earth Reinforcement

Dr. Deepak Mudgal

Digital Communication: Digital communication refers to the transmission of information using digital signals, where data is represented by discrete symbols or values. It encompasses various techniques for encoding, transmitting, and decoding digital data, including text, images, audio, and video. Digital communication systems offer advantages such as improved signal quality, noise immunity, and the ability to multiplex multiple data streams. Differential Pulse Code Modulation (DPCM): DPCM is a digital modulation technique used for encoding analog signals into digital form. In DPCM, the difference between the current sample and the predicted value of the sample is quantized and encoded, rather than encoding the absolute sample value directly. This technique can reduce the amount of data required for transmission compared to standard pulse code modulation (PCM), especially for signals with correlation between successive samples. Delta Modulation (DM): Delta modulation is a simple form of analog-to-digital conversion where the difference (delta) between the current sample and the previous sample is quantized and encoded. In DM, only the sign of the difference (positive or negative) is transmitted, which simplifies the encoding process. However, DM may suffer from quantization noise and limited signal fidelity, especially for rapidly changing or high-frequency signals. Adaptive Delta Modulation (ADM): Adaptive delta modulation is an extension of delta modulation that dynamically adjusts the step size or quantization level based on the characteristics of the input signal. Unlike fixed-step delta modulation, ADM can adapt to changes in signal amplitude or frequency, resulting in improved signal fidelity and reduced quantization error. ADM is particularly useful for encoding signals with varying dynamics or signal-to-noise ratios

Digital Communication Essentials: DPCM, DM, and ADM .pptx

pritamlangde

Memory Interfacing of 8086 with DMA 8257

subhasishdas79

Saudi Arabia [ Abortion pills) Jeddah/riaydh/dammam/+918761049707☎️] cytotec tablets uses abortion pills 💊💊 How effective is the abortion pill? 💊💊 +918761049707) "Abortion pills in Jeddah" how to get cytotec tablets in Riyadh " Abortion pills in dammam*💊💊 The abortion pill is very effective. If you’re taking mifepristone and misoprostol, it depends on how far along the pregnancy is, and how many doses of medicine you take:💊💊 +918761049707) how to buy cytotec pills At 8 weeks pregnant or less, it works about 94-98% of the time. +918761049707[ 💊💊💊 At 8-9 weeks pregnant, it works about 94-96% of the time. +918761049707) At 9-10 weeks pregnant, it works about 91-93% of the time. +918761049707)💊💊 If you take an extra dose of misoprostol, it works about 99% of the time. At 10-11 weeks pregnant, it works about 87% of the time. +918761049707) If you take an extra dose of misoprostol, it works about 98% of the time. In general, taking both mifepristone and+918761049707 misoprostol works a bit better than taking misoprostol only. +918761049707 Taking misoprostol alone works to end the+918761049707 pregnancy about 85-95% of the time — depending on how far along the+918761049707 pregnancy is and how you take the medicine. +918761049707 The abortion pill usually works, but if it doesn’t, you can take more medicine or have an in-clinic abortion. +918761049707 When can I take the abortion pill?+918761049707 In general, you can have a medication abortion up to 77 days (11 weeks)+918761049707 after the first day of your last period. If it’s been 78 days or more since the first day of your last+918761049707period, you can have an in-clinic abortion to end your pregnancy.+918761049707 Why do people choose the abortion pill? Which kind of abortion you choose all depends on your personal+918761049707preference and situation. With+918761049707medication+918761049707 abortion, some people like that you don’t need to have a procedure in a doctor’s office. You can have your medication abortion on your own+918761049707schedule, at home or in another comfortable place that you choose.+918761049707 You get to decide who you want to be with during your abortion, or you can go it alone. Because+918761049707medication abortion is similar to a miscarriage, many people feel like it’s more “natural” and less invasive. And some+918761049707 people may not have an in-clinic abortion provider close by, so abortion pills are more available to+918761049707 them. +918761049707 Your doctor, nurse, or health center staff can help you decide which kind of abortion is best for you. More questions from patients: Saudi Arabia+918761049707 CYTOTEC Misoprostol Tablets. Misoprostol is a medication that can prevent stomach ulcers if you also take NSAID medications. It reduces the amount of acid in your stomach, which protects your stomach lining. The brand name of this medication is Cytotec®️.+918761049707) Unwanted Kit is a combination of two medicines, which is used for

Kuwait City MTP kit ((+919101817206)) Buy Abortion Pills Kuwait

jaanualu31

Computer Networks Basics of Network Devices

ChandrakantDivate1

1_Introduction + EAM Vocabulary + how to navigate in EAM.pdf

AldoGarca30

Max. shear stress theory-Maximum Shear Stress Theory Maximum Distortional ...

ronahami

S1S2 B.Arch MGU - HOA1&2 Module 3 -Temple Architecture of Kerala.pptx

SCMS School of Architecture

Computer Graphics Introduction To Curves

ChandrakantDivate1

“HOSTEL MANAGEMENT SYSTEM” is a software developed for managing various activities in the hostel. For the past few years the number of educational institutions are increasing rapidly. Thereby the number of hostels are also increasing for the accommodation of the students studying in this institution. And hence there is a lot of strain on the person who are running the hostel and software’s are not usually used in this context. This particular project deals with the problems on managing a hostel and avoids the problems which occur when carried manually.

Hostel management system project report..pdf

Kamal Acharya

Education system forms the backbone of every nation. And hence it is important to provide a strong educational foundation to the young generation to ensure the development of open-minded global citizens securing the future for everyone. Advanced technology available today can play a crucial role in streamlining education-related processes to promote solidarity among students, teachers and the school staff. School Management System(SMS) consists of tasks such as registering students, attendance record keeping to control absentees, producing report cards, producing official transcript, preparing timetable and producing different reports for teachers, officials from Dr.Mohiuddin Education foundation and other stakeholders. Automation is the utilization of technology to replace human with a machine that can perform more quickly and more continuously. By automating SMS documents that took up many large storage rooms can be stored on few disks. Transcript images can be annotate. It reduces the time to retrieve old transcripts from hours to seconds.

School management system project Report.pdf

Kamal Acharya

Path loss model, OKUMURA Model, Hata Model

DrAjayKumarYadav4

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

ssuser89054b

Signal Processing and Linear System Analysis

National Chung Hsing University

Recently uploaded (20)

Cara Menggugurkan Sperma Yang Masuk Rahim Biyar Tidak Hamil

Unit 4_Part 1 CSE2001 Exception Handling and Function Template and Class Temp...

PE 459 LECTURE 2- natural gas basic concepts and properties

Introduction to Data Visualization,Matplotlib.pdf

Basic Electronics for diploma students as per technical education Kerala Syll...

NO1 Top No1 Amil Baba In Azad Kashmir, Kashmir Black Magic Specialist Expert ...

Ground Improvement Technique: Earth Reinforcement

Digital Communication Essentials: DPCM, DM, and ADM .pptx

Memory Interfacing of 8086 with DMA 8257

Kuwait City MTP kit ((+919101817206)) Buy Abortion Pills Kuwait

Computer Networks Basics of Network Devices

1_Introduction + EAM Vocabulary + how to navigate in EAM.pdf

Max. shear stress theory-Maximum Shear Stress Theory Maximum Distortional ...

S1S2 B.Arch MGU - HOA1&2 Module 3 -Temple Architecture of Kerala.pptx

Computer Graphics Introduction To Curves

Hostel management system project report..pdf

School management system project Report.pdf

Path loss model, OKUMURA Model, Hata Model

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Signal Processing and Linear System Analysis

Free Vibration of Homogeneous Transversely Isotropic Thermo Elastic Cylindrical Panel

1. International Conference on Advances & Challenges in Interdisciplinary Engineering and Management 26 International Conference on Advances & Challenges in Interdisciplinary Engineering and Management 2017 [ICACIEM 2017] ISBN 978-81-933235-1-9 VOL 01 Website icaciem.org eMail icaciem@asdf.res.in Received 10 – January – 2017 Accepted 28 - January – 2017 Article ID ICACIEM051 eAID ICACIEM.2017.051 Free Vibration of Homogeneous Transversely Isotropic Thermo Elastic Cylindrical Panel M Suganya1 , S Kousalya2 , V Thivya3 , J Padmapariya4 1,2,3,4 Assistant Professor, Department of Mathematics, Vidyaa Vikas College of Engineering and Technology, Tiruchengode, India Abstract: This work analyses the wave propagation in a transversely isotropic thermo elastic solid and hollow circular cylinder of infinite length in Fluid Dynamics. The frequency equations are obtained for longitudinal and flexural modes of vibration and the numerical calculations or carried out for the material zinc and cobalt cylinders. The non-dimensional wave numbers are calculated by using the secant method and the dispersion curves are drawn and they are presented. ISBN 978-81-933235-1-9 VOL 01 Website icaciem.org eMail icaciem@asdf.res.in Received 10 – January – 2017 Accepted 28 - January – 2017 Article ID ICACIEM052 eAID ICACIEM.2017.052 Spatial Data for Image Segmentation a Modified Fuzzy C- Means Clustering with MRI Picture R Mohan1 1 Associate Professors, Dept. of EEE, Vidyaa Vikas College of Engineering and Technology, Tiruchengode, India Abstract: A customary way to deal with division of attractive reverberation (MR) pictures is the Fuzzy C-Means (FCM) grouping calculation. Be that as it may, the customarily standard FCM calculation is delicate to clamour. To defeat the above issue, an adjusted FCM calculation (called MS-FCM later) for MRI cerebrum picture division is displayed in this paper. The calculation is acknowledged by joining the spatial neighbourhood data into the standard FCM calculation and changing the enrolment weighting of every group. In The proposed calculation each purpose of the information set has a weight in connection to each bunch. Hence this weight grants to have a superior characterization particularly on account of clamour information. The proposed calculation is connected to both counterfeit blended picture and genuine picture. Division comes about exhibit that the displayed calculation performs more strong to clamour than the standard FCM calculation. This paper is prepared exclusively for International Conference on Advances & Challenges in Interdisciplinary Engineering and Management 2017 [ICACIEM 2017] which is published by ASDF International, Registered in London, United Kingdom under the directions of the Editor-in-Chief Dr K Samidurai and Editors Dr. Daniel James, Dr. Kokula Krishna Hari Kunasekaran and Dr. Saikishore Elangovan. Permission to make digital or hard copies of part or all of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage, and that copies bear this notice and the full citation on the first page. Copyrights for third-party components of this work must be honoured. For all other uses, contact the owner/author(s). Copyright Holder can be reached at copy@asdf.international for distribution. 2017 © Reserved by Association of Scientists, Developers and Faculties [www.ASDF.international]

Free Vibration of Homogeneous Transversely Isotropic Thermo Elastic Cylindrical Panel

Recommended

Recommended

More Related Content

Similar to Free Vibration of Homogeneous Transversely Isotropic Thermo Elastic Cylindrical Panel

Similar to Free Vibration of Homogeneous Transversely Isotropic Thermo Elastic Cylindrical Panel (20)

More from Association of Scientists, Developers and Faculties

More from Association of Scientists, Developers and Faculties (20)

Recently uploaded

Recently uploaded (20)

Free Vibration of Homogeneous Transversely Isotropic Thermo Elastic Cylindrical Panel