Shared Cluster Decision Assembly method using sky Traffic-Flow Organization
•
0 likes•29 views
Initially linear dataset is formed for capable recovery of data from a massive record. Before undergoing the process of data sighting feature reduction route is implemented. This reduces the dimensionality and increases the space of data cargo space. Hence the map reduce is processed for the next step in knowledge discovering process to remove unwanted and irrelevant data from the database. The Support Vector Machine is one of the classifications technique is used. This overcome the problem of k Means disadvantage, it does not support effectively for both linear and nonlinear format of data. Map Reduce method to add privacy to a huge database can be obtained by adding dual authentication technique which ensures the privacy of the user without over heading the process. This overcomes the overlapping issue caused by the k means algorithm and it also reduces the issue of finding the distance between the record and cluster.
Report
Share
Report
Share
Download to read offline
![International Conference on Advances & Challenges in Interdisciplinary Engineering and Management 42
`
International Conference on Advances & Challenges in Interdisciplinary Engineering and
Management 2017 [ICACIEM 2017]
ISBN 978-81-933235-1-9 VOL 01
Website icaciem.org eMail icaciem@asdf.res.in
Received 10 – January – 2017 Accepted 28 - January – 2017
Article ID ICACIEM083 eAID ICACIEM.2017.083
Shared Cluster Decision Assembly method using sky
Traffic-Flow Organization
K Meiyalakan1
, G Padmapriya2
, P J Shriidhar3
1
Associate Professor, 2
Professors, 3
Assistant Professor, Department of CSE,
Vidyaa Vikas College of Engineering and Technology, Tiruchengode, India
Abstract: Initially linear dataset is formed for capable recovery of data from a massive record. Before undergoing the process of data sighting feature
reduction route is implemented. This reduces the dimensionality and increases the space of data cargo space. Hence the map reduce is processed for the
next step in knowledge discovering process to remove unwanted and irrelevant data from the database. The Support Vector Machine is one of the
classifications technique is used. This overcome the problem of k Means disadvantage, it does not support effectively for both linear and nonlinear
format of data. Map Reduce method to add privacy to a huge database can be obtained by adding dual authentication technique which ensures the
privacy of the user without over heading the process. This overcomes the overlapping issue caused by the k means algorithm and it also reduces the issue
of finding the distance between the record and cluster.
ISBN 978-81-933235-1-9 VOL 01
Website icaciem.org eMail icaciem@asdf.res.in
Received 10 – January – 2017 Accepted 28 - January – 2017
Article ID ICACIEM084 eAID ICACIEM.2017.084
Analysis of Micro-Channel Heat Exchangers
K Dinesh Kumar1
, G Gunasekaran2
, P Jaya Kumar3
, P Jeeva4
, K Karthick5
1,2,3,4,5
UG scholar, Department of Mechanical Engineering, Vidyaa Vikas College of Engineering and Technology, Tiruchengode, India
Abstract: Due to the high performance of electronics components, Heat dissipation becomes a significant issue for stable operation of components.
Micro channels provide very high heat transfer coefficients because of their small diameters. In this study, two dimensional fluid flow and heat transfer
in a rectangular micro channel heat sink are analysed using FLUENT as solver with water as cooling fluid. With strong literature study it is found that
down to 50 μm of hydraulic diameter, macro scale model can be applicable. Three channels of height 50 μm, 100 μm and 150 μm are considered.
The study is mainly focused on Nussle Number and height effects on micro channel thermal performance. The highest temperature is encountered at the
heated surface of the heat sink immediately above the channel outlet.
This paper is prepared exclusively for International Conference on Advances & Challenges in Interdisciplinary Engineering and Management 2017 [ICACIEM
2017] which is published by ASDF International, Registered in London, United Kingdom under the directions of the Editor-in-Chief Dr K Samidurai and Editors
Dr. Daniel James, Dr. Kokula Krishna Hari Kunasekaran and Dr. Saikishore Elangovan. Permission to make digital or hard copies of part or all of this work for
personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage, and that copies bear this
notice and the full citation on the first page. Copyrights for third-party components of this work must be honoured. For all other uses, contact the
owner/author(s). Copyright Holder can be reached at copy@asdf.international for distribution.
2017 © Reserved by Association of Scientists, Developers and Faculties [www.ASDF.international]](https://image.slidesharecdn.com/icaciem2017083-170522105132/85/Shared-Cluster-Decision-Assembly-method-using-sky-Traffic-Flow-Organization-1-320.jpg)
Recommended
An Ultra-Low Power Microprocessor Based Wireless ECG
An Ultra-Low Power Microprocessor Based Wireless ECGAssociation of Scientists, Developers and Faculties
This paper presents the design of a fully integrated electrocardiogram (ECG) signal processor (ESP) for the prediction of ventricular arrhythmia using a unique set of ECG features and a naive Bayes classifier. Real-time and adaptive techniques for the detection and the delineation of the P-QRS-T waves were investigated to extract the fiducially points. Those techniques are robust to any variations in the ECG signal with high sensitivity and precision. Two databases of the heart signal recordings from the MIT Physic Net and the American Heart Association were used as a validation set to evaluate the performance of the processor. Based on application-specified integrated circuit (ASIC) simulation results, the overall classification accuracy was found to be 86% on the out-of-sample validation data with 3-s window size. The proposed architecture of this paper analysis the logic size, area and power consumption using Xilinx 14.2.A Wireless Battery Charger for Mobile Device
In this paper, an innovative design of a wireless battery charger for portable electronic devices is proposed. The wireless power transfer is implemented through the magnetic coupling between a power transmitter, which is connected to the grid, and a power receiver, which is integrated inside the load device. An innovative receiver architecture which heavily Improve the power conversion efficiency is presented. A laboratory prototype of the proposed wireless battery charger has been realized and tested to evaluate system performances. Over the entire range of operating conditions the receiver efficiency lies within the 96.5% to99.9% range.
Measuring Device for Human Comfort Sensation by Converting Fanger Formula Usi...
Measuring Device for Human Comfort Sensation by Converting Fanger Formula Usi...Basrah University for Oil and Gas
Raad Z. HomodRecommended
An Ultra-Low Power Microprocessor Based Wireless ECG
An Ultra-Low Power Microprocessor Based Wireless ECGAssociation of Scientists, Developers and Faculties
This paper presents the design of a fully integrated electrocardiogram (ECG) signal processor (ESP) for the prediction of ventricular arrhythmia using a unique set of ECG features and a naive Bayes classifier. Real-time and adaptive techniques for the detection and the delineation of the P-QRS-T waves were investigated to extract the fiducially points. Those techniques are robust to any variations in the ECG signal with high sensitivity and precision. Two databases of the heart signal recordings from the MIT Physic Net and the American Heart Association were used as a validation set to evaluate the performance of the processor. Based on application-specified integrated circuit (ASIC) simulation results, the overall classification accuracy was found to be 86% on the out-of-sample validation data with 3-s window size. The proposed architecture of this paper analysis the logic size, area and power consumption using Xilinx 14.2.A Wireless Battery Charger for Mobile Device
In this paper, an innovative design of a wireless battery charger for portable electronic devices is proposed. The wireless power transfer is implemented through the magnetic coupling between a power transmitter, which is connected to the grid, and a power receiver, which is integrated inside the load device. An innovative receiver architecture which heavily Improve the power conversion efficiency is presented. A laboratory prototype of the proposed wireless battery charger has been realized and tested to evaluate system performances. Over the entire range of operating conditions the receiver efficiency lies within the 96.5% to99.9% range.
Measuring Device for Human Comfort Sensation by Converting Fanger Formula Usi...
Measuring Device for Human Comfort Sensation by Converting Fanger Formula Usi...Basrah University for Oil and Gas
Raad Z. HomodDesign and Analysis of Wheel Rim with Spiral Flexures
Design and Analysis of Wheel Rim with Spiral FlexuresAssociation of Scientists, Developers and Faculties
PC Aided building framework gives add up to framework way to deal with new item advancement. The utilization of PC in Design Analysis and advancement procedure, which is for the most part iterative in nature, decreases the dreary occupation and expands the accuracy. This extend includes one such model of wheel, which is as indicated by the determination given by the Japanese Industrial Standards. The wheel edge has been broke down for two conditions. Bowing continuance test, Radial perseverance test, In Radial continuance test, taking after three conditions have been dissected. The venture is gone for making the model of the wheel edge utilizing PRO-E Software. The wheel edge which is subjected to different mechanical powers, encounters straight static anxiety and these anxiety appropriations PLOTS are gotten by the utilization of a more adaptable bundle ANSYS, a Finite component bundle.Survey and Research Challenges in Big Data
There has been an ever-increasing interest in big data due to its rapid growth and since it covers diverse areas of applications. Hence, there seems to be a need for an analytical review of recent developments in the big data technology. This paper aims to provide a comprehensive review of the big data state of the art, conceptual explorations, major benefits, and research challenging aspects. In addition to that, several future directions for big data research are highlighted.
Design and Analysis of Propeller Shaft by using Finite Element Analysis Method
Design and Analysis of Propeller Shaft by using Finite Element Analysis MethodAssociation of Scientists, Developers and Faculties
The innovative composite materials such as Graphite, Carbon, Kevlar and Glass with suitable resins are widely used because of their high specific strength (strength/density) and high specific modulus (modulus/density). Carbon fibres are among the most popular reinforcement additives for polymer based composites, to be used in all those applications where very excellent mechanical performances are compulsory. The technology of modern composite materials provides outstanding mechanical results to finished parts whose overall behaviour can vastly exceed many metallic alloys, even the most sophisticated. Advanced composite materials seem ideally suited for long, power driver shaft (propeller shaft) applications. Their elastic properties can be tailored to increase the torque they can carry as well as the rotational speed at which they operate. The drive shafts are used in automotive, aircraft and aerospace applications. The automotive industry is exploiting composite material technology for structural components construction in order to obtain the reduction of the weight without decrease in vehicle quality and reliability. It is known that energy conservation is one of the most important objectives in vehicle design and reduction of weight is one of the most effective measures to obtain this result. Actually, there is almost a direct proportionality between the weight of a vehicle and its fuel consumption, particularly in city driving.Grid-Connected PV-Wind Power System Design
In this paper, a control strategy for power flow management of a grid-connected hybrid photovoltaic (PV)–wind battery-based system with an efficient multi-input transformer coupled bidirectional dc–dc converter is presented. The proposed system aims to satisfy the load demand, manage the power flow from different sources, inject the surplus power into the grid, and charge the battery from the grid as and when required. A transformer-coupled boost half-bridge converter is used to harness power from wind, while a bidirectional buck– boost converter is used to harness power from PV along with battery charging/discharging control. A single-phase full-bridge bidirectional converter is used for feeding ac loads and interaction with the grid. The proposed converter architecture has reduced number of power conversion stages with less component count and reduced losses compared with existing grid-connected hybrid systems. This improves the efficiency and the reliability of the system. Simulation results obtained using MATLAB/Simulink show the performance of the proposed control strategy for power flow management under various modes of operation. The effectiveness of the topology of the proposed control strategy are validated through detailed experimental studies to demonstrate the capability of the system operation in different modes.
Performance Improvement of Jet Ejector Based On CRMC Method by Using CFD
Performance Improvement of Jet Ejector Based On CRMC Method by Using CFDAssociation of Scientists, Developers and Faculties
Jet pumps have been widely used in many applications such as water desalination, steam turbine power generation, refrigeration systems, and chemical plants. The advantage of jet pump system lies in its extremely reliable and stable operation due to the complete absence of moving parts. The performance depends on a number of factors, However among which the flow channel configuration. To obtain this better performance at different operating conditions, area ratio of the jet pump is varied. In this study, a new diffuser based on constant rate momentum change method jet pump theory is written to analyse performance of the proposed jet pump. The model based on the axis-symmetric representation of the experimental jet pump is created using Computational fluid dynamics. The analysis includes effects of pressure and the effects of velocity in the mixing chamber and in the diffuser. The simulated performance of conventional and modified jet pumps are compared. The effects of operating parameters of constant rate momentum change jet pump and conventional jet pump on entrainment ratio are studied.Data Intensive Using Mobile Relay Nodes in Wireless Sensor Networks for Energ...
Data Intensive Using Mobile Relay Nodes in Wireless Sensor Networks for Energ...Association of Scientists, Developers and Faculties
Wireless sensor networks (WSNs) are used in many data-intensive applications. Although, it faces the problem to send all the data sensed by the sensor nodes to the base station within an application’s lifetime due to the limited power supplies. Several mobile nodes like data mules, robotics and mobile base station were used for minimizing power utilization. In this paper, several mobile nodes are studied and the low-priced throwaway mobile relays have been projected which reduce the energy utilization of those WSNs. This proposed work has two main aspects which differ from previous work. First, the mobile nodes are implemented in the low-priced mobile sensor platforms. Second, in the entire optimization framework, the power for both wireless transmission and mobility are reduced. The proposed Centralized Algorithm and Distributed Algorithm used in three stages, in first stage, a most favourable direction-finding tree is computed in which no nodes can move. In second stage, the topology of the routing tree is enhanced by adding new nodes. Finally, the nodes are relocated to get better the routing tree without altering the arrangement of that topology.The Effect of Interface Friction in Drawing AISI 304 Stainless Steel and AL11...
The Effect of Interface Friction in Drawing AISI 304 Stainless Steel and AL11...Association of Scientists, Developers and Faculties
Cups of various shapes and sizes are needed in pressure vessels and aerosol cans, in automobiles, in electronics devices and in many other industrial applications. Deep drawing, spinning, hydro forming, hydro mechanical forming are methods, among others, used for the production of shells Through there are several methods of forming these shells, hydro forming, hydro mechanical forming and forming against hydraulic counter pressure produces shells with very little thinning of the metal. Conventional deep drawing can produce good quality shells at high rate of production. In deep drawing blank holding force is needed to suppress wrinkling of the flange being drawn-in. In the recent years friction actuated blank holding technique has been developed for drawing cylindrical hemispherical and conical cups. In the present work, Finite element technique is used for simulating the deep drawing process with blank holding force on a single action press for drawing the cups. The process is carried out for AISI304 stainless steel and AL100 materials at different conditions; the effect of friction at a given blank holding force on peak drawing load of cup is presented in the report. The process of deep drawing AISI304 stainless steel and AL1100 materials is developed using finite element simulation and the peak load value shall help in choosing correct press and die sets.Energy Harvesting From Piezoelectric Crystals
Now a day’s Power demand has become a major problem which affects both the industries and home appliances. We are more struggled to generate power or we need to pay more cost to generate power from conventional as well as non-conventional energy resources. In this paper we are planned to generate power without any expensive capital cost and struggle (i.e.,) Energy Harvesting from Piezoelectric crystal The stress can be caused by hitting or twisting the material just enough to deform its crystal lattice without fracturing it, the transducer produce the electricity from our mechanical stress, here we no need to give any input other than our mechanical stress or pressure which is wasted in daily life. A crystal can able to produce an electricity of 5Volt, 10mA after every uneven mechanical pressure. After series connection or parallel connection of crystal bring us the required voltage or power. Various different capacity batteries are recharged using each device, to determine the charge time and maximum capacity battery that can be charged. The results presented in this paper show the potential of piezoelectric materials for use in power harvesting applications, provide a means of choosing the piezoelectric device to be used and estimating the amount of time required for it to recharge a specific capacity battery.
Sewage Treatment by Using Cyclic Activated Sludge Technology
This thesis studies a sewage treatment plant (STP) of capacity 51 MLD using Cyclic activated sludge technology (C-Tech technology). The Cyclic activated sludge process has gained increasing importance in sewage treatment, especially on account of the design flexibility to handle varying daily flow and load fluctuations along with operation simplicity. The practice of manipulating activated sludge reaction environments to obtain maximum nitrogen and biological phosphorous removal has been optimized using cyclic activated sludge technology. In its simplest form, the sequences of fill-aeration, settle and decant are continuously operated in a compartment reactor. Low Nitrogen concentrations less than 5 gm/lit by co-current nitrification, de-nitrification mechanism; and phosphorus less than 5 gm/lit without any chemical addition is achievable with this technology. A detailed technical description, salient features & advantages of the C-Tech technology are presented in this work. By operating the sequence of fill aeration-settle-decant all in a same tank, about 30 to 40% of space is saved. STP is so designed as, the flow from one chamber to another is due to gravity. All operations can take place within a single basin which provides for easy extension through modular construction. There is no wastage in the plant as the sludge waste can be used for agriculture purpose.
Analysis of Leaf Spring Using Composite Material
The suspension leaf spring is one of the prospective items for weight reduction in automobile as it accounts for ten to twenty per cent of the spring weight. This helps in achieving the vehicle with superior riding qualities. It is well known that springs, are calculated to absorb and store energy and then release it. In this mission design and analysis of leaf spring in weighty vehicle is carried out. The model of the leaf spring is designed using the software called pro E, and the systematic analysis of the designed model is done using ANSYS software. The model chosen is rear leaf spring. In this model leaves are been used and material is commonly for the leaf spring is spring steel. Now we are replacing the material to E glass epoxy. Then the replica is analysed for the deflection, max stress induce and strain for all the above materials under same load.
Design and Analysis of Pressure Vessel
The significance of the title the project comes to front with designing structure of the pressure vessel for static loading and its assessment by Ansys, is basically a project concerned with design of different pressure vessel elements such as shell, Dish end, working manhole, hold up leg based on standards and codes; and progression of shell and dish end analysed by ansys. The key feature integrated in the project is to ensure the performance of pressure vessel in case of fluctuating loads. Such as selecting the material based on ASME codes, and then designing on the standards measures with referring standard manuals based on ASME. Further we have included the different manufacturing methods practice by the firm and different aspects of it. And step by step approaches to the NTD method carry out by the firm followed with standards and also integrated within the report work. This will be building a clear picture of this method among the reader. Conclusively, this modus of design based on practical standard and codes, can be employed on practical design of pressure vessel as per required by the industry or the problem statement given associated to the field of pressure vessel.
FR-Efficient Compression of PUM Data in WAMS
Widespread placement and high data sampling rate of current generation of phase measurement units (PMUs) in wide area monitoring systems result in huge amount of data to be analysed and stored, making efficient storage of such data a priority. This paper presents a generalized compression technique that utilizes the inherent correlation within PMU data by exploiting both spatial and temporal redundancies. A two stage compression algorithm is proposed using principal component analysis in the first stage and discrete cosine transform in the second. Since compression parameters need to be adjusted to compress critical disturbance information with high fidelity, an automated but simple statistical change detection technique is proposed to identify disturbance data. Extensive verifications are performed using field data, as well as simulated data to establish generality and superior performance of the method. In our project we consider an ecosystem, Ecology plays an important role in agriculture crop rotation, weed control, management of grasslands, range management forestry, biological surveys, pest control, fishery biology, and in the conservation of soil, wildlife, forest, water supplies, water bodies like rivers, lakes and ponds, Collecting related features of living things in the ecosystem and creates a database. And applying the data extraction based on the conditions. Afterward, we propose a compression algorithm, called 2P2D, which exploits the obtained group movement patterns to reduce the amount of delivered data.
Transient Lightning and Switching over Voltages Mitigation in Indian Gas Insu...
Transient Lightning and Switching over Voltages Mitigation in Indian Gas Insu...Shanmuga Priyan Thiagarajan
This paper describes the case study of 500 kV and 750 kV GIS in India. The variations of VFTO magnitudes at different points in 500 kV and 750 kV GIS during different switching operations have been calculated and compared by using Mat lab/Simulink. The problem is the voltage magnifications due to reflections of fast switching and lightning surges at various junctions within the Gas Insulated substations (GIS). Thereby over voltages in GIS are more important than air-insulated substation. GIS have different specifications in proportion to air-insulated substations. Transformer failures related to lightning and switching are often reported. There are methods to suppress the stresses created by lightning and switching in the GIS. Due to the opening or closing of circuit breakers and disconnect switches in Gas Insulated Substations (GIS), especially in the pumped storage power stations, Very Fast Transient Over-voltages (VFTO) are generated. In this paper the effective factors on the level of VFTO is investigated and the beneficial approaches for the industry to find the optimum approaches for VFT mitigation is presented. These factors are include residual charges, resistance, spark resistance and entrance capacitance of transformer. This paper presents feasible methods for mitigation of the overvoltage magnitude. The advantages of the proposed methods are their simplicity and low cost for implantation along with producing minimal changes in the installed GIS in India.Application of Agricultural Waste in Preparation of Sustainable Construction ...
Application of Agricultural Waste in Preparation of Sustainable Construction ...Association of Scientists, Developers and Faculties
Due to rapid urbanization the manufacturing processes of conventional building materials pollutes air, water and land. Hence in order to fulfil the increasing demand it is required to adopt a cost effective, eco-friendly technologies by improving the traditional techniques with the usage of available local materials. Agro – industrial and other solid waste disposal is another serious issue of concern in most of developing countries. The present paper explores the potential application of agro-waste as an ingredient for alternate sustainable construction materials.Spectroscopic Investigation of Charge Transfer Complexes of 4-Aminoacetanilid...
Spectroscopic Investigation of Charge Transfer Complexes of 4-Aminoacetanilid...Association of Scientists, Developers and Faculties
The molecular complexes of a series of electron acceptors of 1,4-benzoquinone (BQ), 2,3,5,6-tetrachloro-1,4-benzoquinone (CHL) and 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) with 4-aminoacetanilide (ACE) have been investigated using various spectral techniques. The stoichiometry of the complexes was determined by photometric titration method and was found to be 1:1, in all the cases. The results of equilibrium and kinetic studies were performed and the final interaction products were characterized by FT-IR.Analysis of Dynamic Latched Comparator with Reduced Delay and Energy for High...
Analysis of Dynamic Latched Comparator with Reduced Delay and Energy for High...Association of Scientists, Developers and Faculties
Design and analysis of Low-power, area efficient and high speed analogue-to-digital converters are pushing toward the use of dynamic comparators, which is used to maximize speed and power efficiency. In the existing design, an analysis on the delay of the dynamic comparators will be presented and analytical expressions are derived. From the analytical expressions, designers can obtain an intuition about the main contributors to the comparator delay and fully explore the trade-offs in dynamic comparator design. Based on the presented analysis, a new dynamic comparator is proposed; where the circuit of a conventional double tail comparator is modified for low-power and fast operation where supply voltages down to 1.2V. Without complicating the design and by adding few transistors, the positive feedback during the regeneration is strengthened, which results in remarkably reduced delay time. This paper presents a CMOS comparator that reduces the overall propagation delay and hence provides higher speed. The design is simulated in 0.18μm CMOS Technology using Tanner EDA Tools. CMOS Comparator shows that the overall propagation delay of the comparator, TPD, is 1.4872e-9 seconds, with a 1.0 V supply voltage.Experimental Investigation on Recon Fibre Reinforced Concrete in addition wit...
Experimental Investigation on Recon Fibre Reinforced Concrete in addition wit...Shanmuga Priyan Thiagarajan
From last many decades, usage of concrete has increased on large scale all over the world. Concrete ingredients used are becoming more costly day by day and also demand for the same is increasing widely all over. These ingredients are also extinguishing with time and some of them are also polluting the surrounding environment on large scale. One of the main ingredients is cement, while production of cement CO2 is emitted out. Replacement of cement by a pozzalanic material named Ground Granulated Blast Furnace Slag, which is by-product or waste product of steel manufacturing industries. Ground Granulated Blast Furnace Slag act as cost reducing ingredient and also increase many mechanical properties of concrete. Glass fibre of 12mm size was also added to increase both compressive and tensile strength of concrete. This concrete is more environments friendly and will give more life to concrete. To maintain workability for lower water/cement ratio and to maintain the effect of admixture added, Super plasticiser is added by trial and error method. Mechanical properties of pozzalanic concrete using silica fume show that this concrete gives better compressive strength and increases durability of concrete. Recon fibre also increases mechanical properties like compressive strength, flexural strength and split tensile strength of concrete. This page revives all details of the material, test to be conducted on concrete using the supplementary admixture and literature showing the advantages of using silica fume and recon Fibre in concrete in different proportion.Optimization of Time-Cost Analysis by Fast Track Method
Optimization of time and cost in construction projects has been subjected to extensive research since the development of the Critical Path Method (CPM). Time and cost as two critical objectives of construction project management, are not independent but intricately related. In reality due to different uncertainties, the actual cost and time of each option is not certainly known for the manager in advance. The methods for optimizing time and cost of construction projects range from mathematical methods to evolutionary based methods. Nowadays, more and more the awareness is growing that fast tracking also has evidential consequences for the earlier design phases. The existing methods of time and cost optimization the fast track method is one of the most recognized methodologies for reducing construction time and project schedules. The fast track method is applied to a selected case study using Microsoft project professional. The works at each stage of the project are overlapped to reduce the total project duration and deliver the project earlier than the time estimated by the conventional method of project planning and scheduling. The overlapping of the design phase and the construction phase in each stage of work has been crucial in reducing the total duration of the project. The case study considered for this study is a commercial project named Hyatt regency which is located at Gachibowli in Hyderabad. The total duration of the project is reduced from 940 days to 766 days which is 18.51%. The project is delivered to the client 6 months earlier. The earlier delivery of the project benefit to both client as well as contractor.
A Security Mechanism for MANET with Efficient Certificate Revocation Mechanism
A Security Mechanism for MANET with Efficient Certificate Revocation MechanismAssociation of Scientists, Developers and Faculties
Mobile Adhoc Network contains mobile nodes which are deployed randomly in the network. These mobile nodes should cooperate each other for successful communication. But due to the frequent changes in network topology, the infrastructure for communication is not available and also presence of some malicious nodes cause attacks in the networks routing path. Hence, security is the major concern in this type of network. Certificate revocation mechanism based on Weighted Voting Game (CR-WVG) approach was introduced in which malicious nodes were identified based on the voting mechanism with respect to weights and quota of each node. However, security in routing paths was still a problem in this approach. To overcome this security issue, Certificate revocation based on weighted voting game and Secure Way Routing protocol (CR-WVG-SWR) is developed in which certificate from Certificate Authority (CA), shortest route discovered and data packets are encrypted using various encryption algorithms. Thus the performance of CR-WVG-SWR scheme is improved and compared with CR-WVG in terms of false revocation, revocation of malicious nodes, accuracy ration of revocation and normalized time to revocation.Asynchronous Power Management Using Grid Deployment Method for Wireless Senso...
Asynchronous Power Management Using Grid Deployment Method for Wireless Senso...Association of Scientists, Developers and Faculties
A correct node operation and power administration are significant issues in the wireless sensor network system. Ultrasonic, dead reckoning, and radio frequency information is obtained by using localization mechanism and worked through a specific filter algorithm. In this paper, a well-organized grid deployment method is applied to split the nodes into multiple individual grids. The tiny grids are used for improved resolution and bigger grids are used to decrease the complexity of processing. The efficiency of each grid is obtained by environmental factors such as redeployed nodes, boundaries, and obstacles. To decrease the power usage, asynchronous power management method is designed. In network communication, power management method is applied by using an asynchronous awakening scheme and n-duplicate coverage algorithm is engineered for the coverage of nodes.Core conferences bta 19 paper 12
Exploring the Experiences of Gender-Based Violence
and The Associated Psychosocial and Mental Health
Issues of Filipino HIV-Positives: Implications for
Psychological Practice
Evangeline R Castronuevo-Ruga1, Normita A Atrillano2
Abstract: The phenomenon of gender-based violence has generated attention from research practitioners and helping professionals since
the surge of the women’s movement three or so decades ago in the Philippines. At about the same time, the HIV-AIDS gained similar
attention with the disclosure of the first ever case of the country in the mid-80s. Only recently, however, has the intersectionality of these
two phenomena been looked into by the research community in other countries and has yet to see parallel response locally. This research,
therefore, attempts to map out the lived experiences of People Living with Human Immuno Deficiency Virus (PLHIV) who have undergone
gender-based violence (GBV). It specially looks into the consequent psychosocial and mental health issues. Using focus group discussion with
24 purposively sampled participants from the highly vulnerable groups based in three major Philippine cities, thematic analysis reveals that
the participants experienced various forms of gender-based violence, e.g., sexual, emotional/psychological, economic, verbal, physical) and
expressions of stigma and discrimination, which in turn, led to manifestations of different emotional and psychological trauma, depression,
internalized homophobia, greater health risks and risk-taking behaviours, among others. It might be worthwhile to consider the possibility
that the consequent risk-taking and self-injurious tendencies played a role in their eventual contraction of HIV.
Estimation of Storage-Draft Rate Characteristics of
Rivers in Selangor Region
Farah Syazana Abd Latif1, Siti Fatin Mohd Razali2
1,2Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia
Abstract: Drought is a phenomenon of extreme water shortage that has significant economic, social, environmental and human life
impact. Streamflow drought characteristics and properties are useful in the design of hydro-technical projects, water resources planning and
management purposes. Information on low flow magnitude, frequency, probability and return period are very crucial in analysing
streamflow drought at the operational level in public water supply. The objectives of this study are to determine the characteristics of low
flow for every streamflow station in the Selangor region. The estimation of minimum storage draft-rate with the probability of low flow
return periods of 2, 5, 10, 20, and 50 years is presented in this paper.
Core conferences bta 19 paper 10
Awwal-Awwal Tampat Budjang Journey Back to
Pre-Islamic Epoch: A Cultural Semiotic
Helen G Juaini1
Abstract: Cultural background plays a significant role in the sphere of semiotics. Semiotics as a discipline is recognized as a useful tool in
gauging cultural background and identifying signs that might represent the message of a certain work. Given the rich cultural context of
Tawi-Tawi oral literature this can be used in studying semiotics. Semiotic tools were employed to interpret the awwal-awwal as provided by
the respondents and to formulate a subsequent understanding of this oral literature in relation to the Sama’s claim of sacredness of Tampat
Budjang.
Politeness and Intimacy in Application Letters of
Three Cultural Groups in Mindanao
Helen G Juaini1
Abstract: 150 application letters from the three cultural groups in Mindano, namely Sinama, Subanen, and Tausug have been analysed
in a mixed-method design. The focus of the study is on the two features of politeness and intimacy. In the quantitative analysis, the model
proposed by Brown & Levinson (1987) and that of Columns (2005) which have drawn upon the features of indirectness in requesting and
the length of letters as the indicators of politeness are used. In the qualitative and descriptive analysis formality in salutation and opening
clause as well as the use of abbreviated forms are taken into account. The result shows that Tausug use the politest style in their application
letters, followed by Sinama and Subanen respectively. On the other hand, Sinama, Subanen, and Tausug use the least intimate style in their
business letters. The findings are hoped to help better inter-cultural understanding, especially with respect to written rhetorical
characteristics.
More Related Content
Similar to Shared Cluster Decision Assembly method using sky Traffic-Flow Organization
Design and Analysis of Wheel Rim with Spiral Flexures
Design and Analysis of Wheel Rim with Spiral FlexuresAssociation of Scientists, Developers and Faculties
PC Aided building framework gives add up to framework way to deal with new item advancement. The utilization of PC in Design Analysis and advancement procedure, which is for the most part iterative in nature, decreases the dreary occupation and expands the accuracy. This extend includes one such model of wheel, which is as indicated by the determination given by the Japanese Industrial Standards. The wheel edge has been broke down for two conditions. Bowing continuance test, Radial perseverance test, In Radial continuance test, taking after three conditions have been dissected. The venture is gone for making the model of the wheel edge utilizing PRO-E Software. The wheel edge which is subjected to different mechanical powers, encounters straight static anxiety and these anxiety appropriations PLOTS are gotten by the utilization of a more adaptable bundle ANSYS, a Finite component bundle.Survey and Research Challenges in Big Data
There has been an ever-increasing interest in big data due to its rapid growth and since it covers diverse areas of applications. Hence, there seems to be a need for an analytical review of recent developments in the big data technology. This paper aims to provide a comprehensive review of the big data state of the art, conceptual explorations, major benefits, and research challenging aspects. In addition to that, several future directions for big data research are highlighted.
Design and Analysis of Propeller Shaft by using Finite Element Analysis Method
Design and Analysis of Propeller Shaft by using Finite Element Analysis MethodAssociation of Scientists, Developers and Faculties
The innovative composite materials such as Graphite, Carbon, Kevlar and Glass with suitable resins are widely used because of their high specific strength (strength/density) and high specific modulus (modulus/density). Carbon fibres are among the most popular reinforcement additives for polymer based composites, to be used in all those applications where very excellent mechanical performances are compulsory. The technology of modern composite materials provides outstanding mechanical results to finished parts whose overall behaviour can vastly exceed many metallic alloys, even the most sophisticated. Advanced composite materials seem ideally suited for long, power driver shaft (propeller shaft) applications. Their elastic properties can be tailored to increase the torque they can carry as well as the rotational speed at which they operate. The drive shafts are used in automotive, aircraft and aerospace applications. The automotive industry is exploiting composite material technology for structural components construction in order to obtain the reduction of the weight without decrease in vehicle quality and reliability. It is known that energy conservation is one of the most important objectives in vehicle design and reduction of weight is one of the most effective measures to obtain this result. Actually, there is almost a direct proportionality between the weight of a vehicle and its fuel consumption, particularly in city driving.Grid-Connected PV-Wind Power System Design
In this paper, a control strategy for power flow management of a grid-connected hybrid photovoltaic (PV)–wind battery-based system with an efficient multi-input transformer coupled bidirectional dc–dc converter is presented. The proposed system aims to satisfy the load demand, manage the power flow from different sources, inject the surplus power into the grid, and charge the battery from the grid as and when required. A transformer-coupled boost half-bridge converter is used to harness power from wind, while a bidirectional buck– boost converter is used to harness power from PV along with battery charging/discharging control. A single-phase full-bridge bidirectional converter is used for feeding ac loads and interaction with the grid. The proposed converter architecture has reduced number of power conversion stages with less component count and reduced losses compared with existing grid-connected hybrid systems. This improves the efficiency and the reliability of the system. Simulation results obtained using MATLAB/Simulink show the performance of the proposed control strategy for power flow management under various modes of operation. The effectiveness of the topology of the proposed control strategy are validated through detailed experimental studies to demonstrate the capability of the system operation in different modes.
Performance Improvement of Jet Ejector Based On CRMC Method by Using CFD
Performance Improvement of Jet Ejector Based On CRMC Method by Using CFDAssociation of Scientists, Developers and Faculties
Jet pumps have been widely used in many applications such as water desalination, steam turbine power generation, refrigeration systems, and chemical plants. The advantage of jet pump system lies in its extremely reliable and stable operation due to the complete absence of moving parts. The performance depends on a number of factors, However among which the flow channel configuration. To obtain this better performance at different operating conditions, area ratio of the jet pump is varied. In this study, a new diffuser based on constant rate momentum change method jet pump theory is written to analyse performance of the proposed jet pump. The model based on the axis-symmetric representation of the experimental jet pump is created using Computational fluid dynamics. The analysis includes effects of pressure and the effects of velocity in the mixing chamber and in the diffuser. The simulated performance of conventional and modified jet pumps are compared. The effects of operating parameters of constant rate momentum change jet pump and conventional jet pump on entrainment ratio are studied.Data Intensive Using Mobile Relay Nodes in Wireless Sensor Networks for Energ...
Data Intensive Using Mobile Relay Nodes in Wireless Sensor Networks for Energ...Association of Scientists, Developers and Faculties
Wireless sensor networks (WSNs) are used in many data-intensive applications. Although, it faces the problem to send all the data sensed by the sensor nodes to the base station within an application’s lifetime due to the limited power supplies. Several mobile nodes like data mules, robotics and mobile base station were used for minimizing power utilization. In this paper, several mobile nodes are studied and the low-priced throwaway mobile relays have been projected which reduce the energy utilization of those WSNs. This proposed work has two main aspects which differ from previous work. First, the mobile nodes are implemented in the low-priced mobile sensor platforms. Second, in the entire optimization framework, the power for both wireless transmission and mobility are reduced. The proposed Centralized Algorithm and Distributed Algorithm used in three stages, in first stage, a most favourable direction-finding tree is computed in which no nodes can move. In second stage, the topology of the routing tree is enhanced by adding new nodes. Finally, the nodes are relocated to get better the routing tree without altering the arrangement of that topology.The Effect of Interface Friction in Drawing AISI 304 Stainless Steel and AL11...
The Effect of Interface Friction in Drawing AISI 304 Stainless Steel and AL11...Association of Scientists, Developers and Faculties
Cups of various shapes and sizes are needed in pressure vessels and aerosol cans, in automobiles, in electronics devices and in many other industrial applications. Deep drawing, spinning, hydro forming, hydro mechanical forming are methods, among others, used for the production of shells Through there are several methods of forming these shells, hydro forming, hydro mechanical forming and forming against hydraulic counter pressure produces shells with very little thinning of the metal. Conventional deep drawing can produce good quality shells at high rate of production. In deep drawing blank holding force is needed to suppress wrinkling of the flange being drawn-in. In the recent years friction actuated blank holding technique has been developed for drawing cylindrical hemispherical and conical cups. In the present work, Finite element technique is used for simulating the deep drawing process with blank holding force on a single action press for drawing the cups. The process is carried out for AISI304 stainless steel and AL100 materials at different conditions; the effect of friction at a given blank holding force on peak drawing load of cup is presented in the report. The process of deep drawing AISI304 stainless steel and AL1100 materials is developed using finite element simulation and the peak load value shall help in choosing correct press and die sets.Energy Harvesting From Piezoelectric Crystals
Now a day’s Power demand has become a major problem which affects both the industries and home appliances. We are more struggled to generate power or we need to pay more cost to generate power from conventional as well as non-conventional energy resources. In this paper we are planned to generate power without any expensive capital cost and struggle (i.e.,) Energy Harvesting from Piezoelectric crystal The stress can be caused by hitting or twisting the material just enough to deform its crystal lattice without fracturing it, the transducer produce the electricity from our mechanical stress, here we no need to give any input other than our mechanical stress or pressure which is wasted in daily life. A crystal can able to produce an electricity of 5Volt, 10mA after every uneven mechanical pressure. After series connection or parallel connection of crystal bring us the required voltage or power. Various different capacity batteries are recharged using each device, to determine the charge time and maximum capacity battery that can be charged. The results presented in this paper show the potential of piezoelectric materials for use in power harvesting applications, provide a means of choosing the piezoelectric device to be used and estimating the amount of time required for it to recharge a specific capacity battery.
Sewage Treatment by Using Cyclic Activated Sludge Technology
This thesis studies a sewage treatment plant (STP) of capacity 51 MLD using Cyclic activated sludge technology (C-Tech technology). The Cyclic activated sludge process has gained increasing importance in sewage treatment, especially on account of the design flexibility to handle varying daily flow and load fluctuations along with operation simplicity. The practice of manipulating activated sludge reaction environments to obtain maximum nitrogen and biological phosphorous removal has been optimized using cyclic activated sludge technology. In its simplest form, the sequences of fill-aeration, settle and decant are continuously operated in a compartment reactor. Low Nitrogen concentrations less than 5 gm/lit by co-current nitrification, de-nitrification mechanism; and phosphorus less than 5 gm/lit without any chemical addition is achievable with this technology. A detailed technical description, salient features & advantages of the C-Tech technology are presented in this work. By operating the sequence of fill aeration-settle-decant all in a same tank, about 30 to 40% of space is saved. STP is so designed as, the flow from one chamber to another is due to gravity. All operations can take place within a single basin which provides for easy extension through modular construction. There is no wastage in the plant as the sludge waste can be used for agriculture purpose.
Analysis of Leaf Spring Using Composite Material
The suspension leaf spring is one of the prospective items for weight reduction in automobile as it accounts for ten to twenty per cent of the spring weight. This helps in achieving the vehicle with superior riding qualities. It is well known that springs, are calculated to absorb and store energy and then release it. In this mission design and analysis of leaf spring in weighty vehicle is carried out. The model of the leaf spring is designed using the software called pro E, and the systematic analysis of the designed model is done using ANSYS software. The model chosen is rear leaf spring. In this model leaves are been used and material is commonly for the leaf spring is spring steel. Now we are replacing the material to E glass epoxy. Then the replica is analysed for the deflection, max stress induce and strain for all the above materials under same load.
Design and Analysis of Pressure Vessel
The significance of the title the project comes to front with designing structure of the pressure vessel for static loading and its assessment by Ansys, is basically a project concerned with design of different pressure vessel elements such as shell, Dish end, working manhole, hold up leg based on standards and codes; and progression of shell and dish end analysed by ansys. The key feature integrated in the project is to ensure the performance of pressure vessel in case of fluctuating loads. Such as selecting the material based on ASME codes, and then designing on the standards measures with referring standard manuals based on ASME. Further we have included the different manufacturing methods practice by the firm and different aspects of it. And step by step approaches to the NTD method carry out by the firm followed with standards and also integrated within the report work. This will be building a clear picture of this method among the reader. Conclusively, this modus of design based on practical standard and codes, can be employed on practical design of pressure vessel as per required by the industry or the problem statement given associated to the field of pressure vessel.
FR-Efficient Compression of PUM Data in WAMS
Widespread placement and high data sampling rate of current generation of phase measurement units (PMUs) in wide area monitoring systems result in huge amount of data to be analysed and stored, making efficient storage of such data a priority. This paper presents a generalized compression technique that utilizes the inherent correlation within PMU data by exploiting both spatial and temporal redundancies. A two stage compression algorithm is proposed using principal component analysis in the first stage and discrete cosine transform in the second. Since compression parameters need to be adjusted to compress critical disturbance information with high fidelity, an automated but simple statistical change detection technique is proposed to identify disturbance data. Extensive verifications are performed using field data, as well as simulated data to establish generality and superior performance of the method. In our project we consider an ecosystem, Ecology plays an important role in agriculture crop rotation, weed control, management of grasslands, range management forestry, biological surveys, pest control, fishery biology, and in the conservation of soil, wildlife, forest, water supplies, water bodies like rivers, lakes and ponds, Collecting related features of living things in the ecosystem and creates a database. And applying the data extraction based on the conditions. Afterward, we propose a compression algorithm, called 2P2D, which exploits the obtained group movement patterns to reduce the amount of delivered data.
Transient Lightning and Switching over Voltages Mitigation in Indian Gas Insu...
Transient Lightning and Switching over Voltages Mitigation in Indian Gas Insu...Shanmuga Priyan Thiagarajan
This paper describes the case study of 500 kV and 750 kV GIS in India. The variations of VFTO magnitudes at different points in 500 kV and 750 kV GIS during different switching operations have been calculated and compared by using Mat lab/Simulink. The problem is the voltage magnifications due to reflections of fast switching and lightning surges at various junctions within the Gas Insulated substations (GIS). Thereby over voltages in GIS are more important than air-insulated substation. GIS have different specifications in proportion to air-insulated substations. Transformer failures related to lightning and switching are often reported. There are methods to suppress the stresses created by lightning and switching in the GIS. Due to the opening or closing of circuit breakers and disconnect switches in Gas Insulated Substations (GIS), especially in the pumped storage power stations, Very Fast Transient Over-voltages (VFTO) are generated. In this paper the effective factors on the level of VFTO is investigated and the beneficial approaches for the industry to find the optimum approaches for VFT mitigation is presented. These factors are include residual charges, resistance, spark resistance and entrance capacitance of transformer. This paper presents feasible methods for mitigation of the overvoltage magnitude. The advantages of the proposed methods are their simplicity and low cost for implantation along with producing minimal changes in the installed GIS in India.Application of Agricultural Waste in Preparation of Sustainable Construction ...
Application of Agricultural Waste in Preparation of Sustainable Construction ...Association of Scientists, Developers and Faculties
Due to rapid urbanization the manufacturing processes of conventional building materials pollutes air, water and land. Hence in order to fulfil the increasing demand it is required to adopt a cost effective, eco-friendly technologies by improving the traditional techniques with the usage of available local materials. Agro – industrial and other solid waste disposal is another serious issue of concern in most of developing countries. The present paper explores the potential application of agro-waste as an ingredient for alternate sustainable construction materials.Spectroscopic Investigation of Charge Transfer Complexes of 4-Aminoacetanilid...
Spectroscopic Investigation of Charge Transfer Complexes of 4-Aminoacetanilid...Association of Scientists, Developers and Faculties
The molecular complexes of a series of electron acceptors of 1,4-benzoquinone (BQ), 2,3,5,6-tetrachloro-1,4-benzoquinone (CHL) and 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) with 4-aminoacetanilide (ACE) have been investigated using various spectral techniques. The stoichiometry of the complexes was determined by photometric titration method and was found to be 1:1, in all the cases. The results of equilibrium and kinetic studies were performed and the final interaction products were characterized by FT-IR.Analysis of Dynamic Latched Comparator with Reduced Delay and Energy for High...
Analysis of Dynamic Latched Comparator with Reduced Delay and Energy for High...Association of Scientists, Developers and Faculties
Design and analysis of Low-power, area efficient and high speed analogue-to-digital converters are pushing toward the use of dynamic comparators, which is used to maximize speed and power efficiency. In the existing design, an analysis on the delay of the dynamic comparators will be presented and analytical expressions are derived. From the analytical expressions, designers can obtain an intuition about the main contributors to the comparator delay and fully explore the trade-offs in dynamic comparator design. Based on the presented analysis, a new dynamic comparator is proposed; where the circuit of a conventional double tail comparator is modified for low-power and fast operation where supply voltages down to 1.2V. Without complicating the design and by adding few transistors, the positive feedback during the regeneration is strengthened, which results in remarkably reduced delay time. This paper presents a CMOS comparator that reduces the overall propagation delay and hence provides higher speed. The design is simulated in 0.18μm CMOS Technology using Tanner EDA Tools. CMOS Comparator shows that the overall propagation delay of the comparator, TPD, is 1.4872e-9 seconds, with a 1.0 V supply voltage.Experimental Investigation on Recon Fibre Reinforced Concrete in addition wit...
Experimental Investigation on Recon Fibre Reinforced Concrete in addition wit...Shanmuga Priyan Thiagarajan
From last many decades, usage of concrete has increased on large scale all over the world. Concrete ingredients used are becoming more costly day by day and also demand for the same is increasing widely all over. These ingredients are also extinguishing with time and some of them are also polluting the surrounding environment on large scale. One of the main ingredients is cement, while production of cement CO2 is emitted out. Replacement of cement by a pozzalanic material named Ground Granulated Blast Furnace Slag, which is by-product or waste product of steel manufacturing industries. Ground Granulated Blast Furnace Slag act as cost reducing ingredient and also increase many mechanical properties of concrete. Glass fibre of 12mm size was also added to increase both compressive and tensile strength of concrete. This concrete is more environments friendly and will give more life to concrete. To maintain workability for lower water/cement ratio and to maintain the effect of admixture added, Super plasticiser is added by trial and error method. Mechanical properties of pozzalanic concrete using silica fume show that this concrete gives better compressive strength and increases durability of concrete. Recon fibre also increases mechanical properties like compressive strength, flexural strength and split tensile strength of concrete. This page revives all details of the material, test to be conducted on concrete using the supplementary admixture and literature showing the advantages of using silica fume and recon Fibre in concrete in different proportion.Optimization of Time-Cost Analysis by Fast Track Method
Optimization of time and cost in construction projects has been subjected to extensive research since the development of the Critical Path Method (CPM). Time and cost as two critical objectives of construction project management, are not independent but intricately related. In reality due to different uncertainties, the actual cost and time of each option is not certainly known for the manager in advance. The methods for optimizing time and cost of construction projects range from mathematical methods to evolutionary based methods. Nowadays, more and more the awareness is growing that fast tracking also has evidential consequences for the earlier design phases. The existing methods of time and cost optimization the fast track method is one of the most recognized methodologies for reducing construction time and project schedules. The fast track method is applied to a selected case study using Microsoft project professional. The works at each stage of the project are overlapped to reduce the total project duration and deliver the project earlier than the time estimated by the conventional method of project planning and scheduling. The overlapping of the design phase and the construction phase in each stage of work has been crucial in reducing the total duration of the project. The case study considered for this study is a commercial project named Hyatt regency which is located at Gachibowli in Hyderabad. The total duration of the project is reduced from 940 days to 766 days which is 18.51%. The project is delivered to the client 6 months earlier. The earlier delivery of the project benefit to both client as well as contractor.
A Security Mechanism for MANET with Efficient Certificate Revocation Mechanism
A Security Mechanism for MANET with Efficient Certificate Revocation MechanismAssociation of Scientists, Developers and Faculties
Mobile Adhoc Network contains mobile nodes which are deployed randomly in the network. These mobile nodes should cooperate each other for successful communication. But due to the frequent changes in network topology, the infrastructure for communication is not available and also presence of some malicious nodes cause attacks in the networks routing path. Hence, security is the major concern in this type of network. Certificate revocation mechanism based on Weighted Voting Game (CR-WVG) approach was introduced in which malicious nodes were identified based on the voting mechanism with respect to weights and quota of each node. However, security in routing paths was still a problem in this approach. To overcome this security issue, Certificate revocation based on weighted voting game and Secure Way Routing protocol (CR-WVG-SWR) is developed in which certificate from Certificate Authority (CA), shortest route discovered and data packets are encrypted using various encryption algorithms. Thus the performance of CR-WVG-SWR scheme is improved and compared with CR-WVG in terms of false revocation, revocation of malicious nodes, accuracy ration of revocation and normalized time to revocation.Asynchronous Power Management Using Grid Deployment Method for Wireless Senso...
Asynchronous Power Management Using Grid Deployment Method for Wireless Senso...Association of Scientists, Developers and Faculties
A correct node operation and power administration are significant issues in the wireless sensor network system. Ultrasonic, dead reckoning, and radio frequency information is obtained by using localization mechanism and worked through a specific filter algorithm. In this paper, a well-organized grid deployment method is applied to split the nodes into multiple individual grids. The tiny grids are used for improved resolution and bigger grids are used to decrease the complexity of processing. The efficiency of each grid is obtained by environmental factors such as redeployed nodes, boundaries, and obstacles. To decrease the power usage, asynchronous power management method is designed. In network communication, power management method is applied by using an asynchronous awakening scheme and n-duplicate coverage algorithm is engineered for the coverage of nodes.Similar to Shared Cluster Decision Assembly method using sky Traffic-Flow Organization (20)
Design and Analysis of Wheel Rim with Spiral Flexures
Design and Analysis of Wheel Rim with Spiral Flexures
Design and Analysis of Propeller Shaft by using Finite Element Analysis Method
Design and Analysis of Propeller Shaft by using Finite Element Analysis Method
Performance Improvement of Jet Ejector Based On CRMC Method by Using CFD
Performance Improvement of Jet Ejector Based On CRMC Method by Using CFD
Data Intensive Using Mobile Relay Nodes in Wireless Sensor Networks for Energ...
Data Intensive Using Mobile Relay Nodes in Wireless Sensor Networks for Energ...
The Effect of Interface Friction in Drawing AISI 304 Stainless Steel and AL11...
The Effect of Interface Friction in Drawing AISI 304 Stainless Steel and AL11...
Sewage Treatment by Using Cyclic Activated Sludge Technology
Sewage Treatment by Using Cyclic Activated Sludge Technology
Transient Lightning and Switching over Voltages Mitigation in Indian Gas Insu...
Transient Lightning and Switching over Voltages Mitigation in Indian Gas Insu...
Application of Agricultural Waste in Preparation of Sustainable Construction ...
Application of Agricultural Waste in Preparation of Sustainable Construction ...
Spectroscopic Investigation of Charge Transfer Complexes of 4-Aminoacetanilid...
Spectroscopic Investigation of Charge Transfer Complexes of 4-Aminoacetanilid...
Analysis of Dynamic Latched Comparator with Reduced Delay and Energy for High...
Analysis of Dynamic Latched Comparator with Reduced Delay and Energy for High...
Experimental Investigation on Recon Fibre Reinforced Concrete in addition wit...
Experimental Investigation on Recon Fibre Reinforced Concrete in addition wit...
Optimization of Time-Cost Analysis by Fast Track Method
Optimization of Time-Cost Analysis by Fast Track Method
A Security Mechanism for MANET with Efficient Certificate Revocation Mechanism
A Security Mechanism for MANET with Efficient Certificate Revocation Mechanism
Asynchronous Power Management Using Grid Deployment Method for Wireless Senso...
Asynchronous Power Management Using Grid Deployment Method for Wireless Senso...
More from Association of Scientists, Developers and Faculties
Core conferences bta 19 paper 12
Exploring the Experiences of Gender-Based Violence
and The Associated Psychosocial and Mental Health
Issues of Filipino HIV-Positives: Implications for
Psychological Practice
Evangeline R Castronuevo-Ruga1, Normita A Atrillano2
Abstract: The phenomenon of gender-based violence has generated attention from research practitioners and helping professionals since
the surge of the women’s movement three or so decades ago in the Philippines. At about the same time, the HIV-AIDS gained similar
attention with the disclosure of the first ever case of the country in the mid-80s. Only recently, however, has the intersectionality of these
two phenomena been looked into by the research community in other countries and has yet to see parallel response locally. This research,
therefore, attempts to map out the lived experiences of People Living with Human Immuno Deficiency Virus (PLHIV) who have undergone
gender-based violence (GBV). It specially looks into the consequent psychosocial and mental health issues. Using focus group discussion with
24 purposively sampled participants from the highly vulnerable groups based in three major Philippine cities, thematic analysis reveals that
the participants experienced various forms of gender-based violence, e.g., sexual, emotional/psychological, economic, verbal, physical) and
expressions of stigma and discrimination, which in turn, led to manifestations of different emotional and psychological trauma, depression,
internalized homophobia, greater health risks and risk-taking behaviours, among others. It might be worthwhile to consider the possibility
that the consequent risk-taking and self-injurious tendencies played a role in their eventual contraction of HIV.
Estimation of Storage-Draft Rate Characteristics of
Rivers in Selangor Region
Farah Syazana Abd Latif1, Siti Fatin Mohd Razali2
1,2Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia
Abstract: Drought is a phenomenon of extreme water shortage that has significant economic, social, environmental and human life
impact. Streamflow drought characteristics and properties are useful in the design of hydro-technical projects, water resources planning and
management purposes. Information on low flow magnitude, frequency, probability and return period are very crucial in analysing
streamflow drought at the operational level in public water supply. The objectives of this study are to determine the characteristics of low
flow for every streamflow station in the Selangor region. The estimation of minimum storage draft-rate with the probability of low flow
return periods of 2, 5, 10, 20, and 50 years is presented in this paper.
Core conferences bta 19 paper 10
Awwal-Awwal Tampat Budjang Journey Back to
Pre-Islamic Epoch: A Cultural Semiotic
Helen G Juaini1
Abstract: Cultural background plays a significant role in the sphere of semiotics. Semiotics as a discipline is recognized as a useful tool in
gauging cultural background and identifying signs that might represent the message of a certain work. Given the rich cultural context of
Tawi-Tawi oral literature this can be used in studying semiotics. Semiotic tools were employed to interpret the awwal-awwal as provided by
the respondents and to formulate a subsequent understanding of this oral literature in relation to the Sama’s claim of sacredness of Tampat
Budjang.
Politeness and Intimacy in Application Letters of
Three Cultural Groups in Mindanao
Helen G Juaini1
Abstract: 150 application letters from the three cultural groups in Mindano, namely Sinama, Subanen, and Tausug have been analysed
in a mixed-method design. The focus of the study is on the two features of politeness and intimacy. In the quantitative analysis, the model
proposed by Brown & Levinson (1987) and that of Columns (2005) which have drawn upon the features of indirectness in requesting and
the length of letters as the indicators of politeness are used. In the qualitative and descriptive analysis formality in salutation and opening
clause as well as the use of abbreviated forms are taken into account. The result shows that Tausug use the politest style in their application
letters, followed by Sinama and Subanen respectively. On the other hand, Sinama, Subanen, and Tausug use the least intimate style in their
business letters. The findings are hoped to help better inter-cultural understanding, especially with respect to written rhetorical
characteristics.
Core conferences bta 19 paper 8
New Authentication Algorithm for IoT Environment
based on Non-Commutative Algebra and Its
Implementation
Maki Kihara1, Satoshi Iriyama2
1,2Tokyo University of Science
Abstract: Recently, IoT devices such as robots, speakers, domestic electrical appliances and smart devices are provided everywhere for
everyone. While their authentication request is quite ubiquitously, namely, an authentication for sharing services, the actual
implementations are patchy schemes of variety security policies. In this study, we propose the new authentication scheme for IoT devices
without certificate authority which is fast enough as well as secure. The verification algorithm is based on suitable ciphered metric. We
define a class of such verifiable encryption and give an example for authentication. Moreover, we show the implementation which keeps
perfect secrecy by means of Shannon’s theory.
Developing a Strategic Organisational Learning
Framework to Improve Caribbean Disaster
Management Performance
Joanne Persad1
Abstract: Disasters are social constructs and require an agility and adaptability from national disaster organisations (NDOs). The
environment in which NDOs operate are complex adaptive systems environment, and organisational learning as a key approach is considered
fundamental to strengthening the ability of an NDO to perform at its best. With the potential for loss of lives, the destruction of critical
infrastructure and housing and to the risk of setting back a country’s economic development by many years, learning from the lessons of the
past, to reduce the negative impacts is critical for the onward growth of Caribbean countries which, for the most part, are small island
developing states. The Caribbean Region is the one of the most hazard prone regions in the world (Walbrent College 2012). Lessons from
disaster impacts are identified, gaps are well documented, and failures are sometimes exposed. But learning, in terms of making changes to
improve systems, performance and resilience, is questionable. The lessons must be applied for change to occur, this is part of the knowledge
management process in the context of disaster organisations. The purpose of this study is to explore the apparent inability of national
disaster organizations in the Caribbean to apply the lessons learnt from previous disasters. Three (3) Caribbean countries have been selected
for this research. It is a multiple case study where the unit of analysis is the national disaster organisation. This study is based on an
interpretive paradigm.
Core conferences bta 19 paper 7
Combating Climate Change and Land Degradation in
The West African Sahel: A Multi-Country Study of
Mali, Niger and Senegal
S A Igbatayo1
1Head, Department of Economics & Management Studies, AFE Babalola University, Nigeria
Abstract: The West African Sahel is a vast ecological zone separating the Sahara Desert to the north and Sudanian savannah to the
south; traversing Senegal, Mali, Burkina Faso, Niger, northern Nigeria and Chad. With a population estimated at more than 60 million
people, the region features a multiplicity of development challenges. It is home to some of the world’s most impoverished people, whose
livelihoods are mostly reliant on rain-fed agriculture. Characterized by semi-arid vegetation, the West African Sahel is one of the most
environmentally degraded ecosystems in the world. The region faces severe and recurring bouts of droughts since the 1980s, jeopardizing
environmental sustainability. During the past four decades, the West African Sahel has witnessed below-average annual precipitation, with
two severe drought periods in 1972-1973 and 1983–1984, in a development that undermined agricultural productivity and spawned
severe land degradation. Various studies have predicted even more severe climate variability and change in the region, with drier and more
frequent dry periods expected. The intergovernmental Panel on climate change (IPCC, 2007) revealed a decline in annual rainfall in West
Africa since the end of the 1960s, with a reduction of 20% to 40% observed in the periods 1931-1960 and 1968–1990. Repeated
droughts, fuelled by climate change, have undermined land productivity, turning arable soils into marginal lands, and rendering land
resources vulnerable to such anthropogenic activities as over-grazing, agricultural intensification and deforestation, which are common
practices across the region. The major objective of this paper is to shed light on climate change and land degradation patterns in the West
African Sahel. It employs empirical data to analyse the trends, with particular emphasis on Mali, Niger and Senegal. The study reveals
considerable threats posed by the twin scourges of climate change and land degradation to food security, environmental sustainability and
regional stability.
Core conferences bta 19 paper 6
Combating Climate Change and Land Degradation in
The West African Sahel: A Multi-Country Study of
Mali, Niger and Senegal
S A Igbatayo1
1Head, Department of Economics & Management Studies, AFE Babalola University, Nigeria
Abstract: The West African Sahel is a vast ecological zone separating the Sahara Desert to the north and Sudanian savannah to the
south; traversing Senegal, Mali, Burkina Faso, Niger, northern Nigeria and Chad. With a population estimated at more than 60 million
people, the region features a multiplicity of development challenges. It is home to some of the world’s most impoverished people, whose
livelihoods are mostly reliant on rain-fed agriculture. Characterized by semi-arid vegetation, the West African Sahel is one of the most
environmentally degraded ecosystems in the world. The region faces severe and recurring bouts of droughts since the 1980s, jeopardizing
environmental sustainability. During the past four decades, the West African Sahel has witnessed below-average annual precipitation, with
two severe drought periods in 1972-1973 and 1983–1984, in a development that undermined agricultural productivity and spawned
severe land degradation. Various studies have predicted even more severe climate variability and change in the region, with drier and more
frequent dry periods expected. The intergovernmental Panel on climate change (IPCC, 2007) revealed a decline in annual rainfall in West
Africa since the end of the 1960s, with a reduction of 20% to 40% observed in the periods 1931-1960 and 1968–1990. Repeated
droughts, fuelled by climate change, have undermined land productivity, turning arable soils into marginal lands, and rendering land
resources vulnerable to such anthropogenic activities as over-grazing, agricultural intensification and deforestation, which are common
practices across the region. The major objective of this paper is to shed light on climate change and land degradation patterns in the West
African Sahel. It employs empirical data to analyse the trends, with particular emphasis on Mali, Niger and Senegal. The study reveals
considerable threats posed by the twin scourges of climate change and land degradation to food security, environmental sustainability and
regional stability. It also presents a policy framework underpinned by climate change mitigation and adaptation strategies, formalizing land
rights for farmers, subsidizing farm inputs, creating grazing reserves for pastoralists and deepening poverty reduction strategies.
Core conferences bta 19 paper 5
A Study on Factor Affecting Textile
Entrepreneurship – A Special Emphasis on Tirupur
District
P Anbuoli1
1Assistant Professor, Department of Business Administration, Mannar Thirumalai Naicker College, India
Abstract: Entrepreneurial success depends on various factors associated with the business, the entrepreneurs’ wishes to start. Entrepreneurs
need some sort of inspirations to succeed in their business ventures. Being a versatile industry, textile attracts many entrepreneurs both urban
and rural peoples and requires minimal investment to start. Textile entrepreneurs have to face several challenges and prospects associated
with their business. This study has been commenced with the objectives to check demographic profile, factors affecting textile entrepreneurs,
encouragement of external factors and personal reason behind to become textile business entrepreneurs. This study has been carried out with
100 textile entrepreneurs; the sample has been selected by using simple random sampling. This study is also carried out with non-disguised
and structured questionnaire; which consists of four parts with seeking information on demographic profile, factors affecting textile
entrepreneurs, external encouraging factors and personal reason to become textile entrepreneurs. This study uses percentage analysis, factor
analysis, Garrett score ranking, and t-test to analyse the data collected. It was concluded that textile entrepreneurs have been encouraged by
various factors and moreover several factors significantly affect their business.
Factors Affecting Consumer Purchase Behaviour
towards Online Clothing Products in Bangladesh
T Islam1
1BRAC Business School, BRAC University, Dhaka, Bangladesh
Abstract: The online clothing businesses have seen a considerable rise in recent times, with a high and growing demand. The purpose of
this study is to determine the factors that play significant roles in creating purchase intention towards the online clothing products in
Bangladesh. Secondary research was used to build the model of customer purchase intention. A structured questionnaire was employed to
gather data and test the model. Factor analysis and regression were used to test the model. The regression model suggested that customer
purchase intention was induced most by the online marketing activities of the online retailers, followed by pricing strategy implemented and
sense of security provided (in that order). To understand customer purchase intentions better, it may be important to look at additional
factors or seek better measures of the constructs. The study suggests that online retailers should heavily focus on online promotions and
pricing.
Core conferences bta 19 paper 4
Improvement Measures on Wage System of
Construction Skilled Worker in South Korea
Kun-Hyung Lee1, Byung-Uk Jo2, Kyeoung-Min Han3, Chang-Baek Son4
1,2,3Graduate, School of Architectural Engineering, Semyung University, Jecheon-si, South Korea
4Professor, Department of Architectural Engineering, Semyung University, Jecheon-si, South Korea
Abstract: Unlike other industries, the construction industry is characterized by its heavy dependence on labour force with most work done
by workers. Still, the industry is witnessing the declining influx of young workers and the rising turnover rates of skilled workers due to such
issues as the advancement of 3D industry, negative image and absence of an established wage system. Hence, this paper proposes an
alternative scheme that would help improve the wage system and work environment for skilled construction workers in Korea.
Mastering the Recycling of Masonry while building
Tadao Ando’s Private Gallery in Lincoln Park,
Chicago
Daniel Joseph Whittaker1
Abstract: The notion of a great presence of masonry rarely conjures up the likes of buildings by master architect, Tadao Ando san of
Osaka, Japan, who is better known for his sublime shaping of space with planar forms of site-cast concrete. Perhaps though, one may recall
the ‘historical intervention’ on a grand scale—the now nine-year-old Punta Della Dogan a project (2009) in Venice, Italy, as prima facie
evidence of his dialogue with a vast quantity of ancient masonry in the Laguna. However, a new project by Ando, recently opened in
Chicago, Illinois (October 2018), presents the private-museum-gallery-going public with a new North American delight. Here, the senses
are able to indulge in a hybrid set of experiences shaped by masonry, concrete, and white painted plaster surfaces. This paper explores how
the modern concrete master has expanded his dynamic architectural vocabulary utilizing what is known as Chicago common brick: a soft,
Lake Michigan-sand and clay based fired brick, and incorporated it into his most recent private commission located in Lincoln Park,
Chicago.
Core conferences bta 19 paper 3
RRI Buffer Based Energy and Computation Efficient
Cache Replacement Algorithm
Muhammad Shahid1
1Computer Science Department, National University of Computer and Emerging Sciences, Islamabad
Abstract: Energy consumption is an important factor of com-mutational power these days. Large scale energy consumption results in bad
system performance and high cost. To access frequently used data, we place it in Cache. Cache provides us opportunity to access that data in
a small time. Cache memory helps in retrieving data in minimum time improving the system performance and reducing power consumption.
Due to limited size of Cache, replacement algorithms used to make space for new data. There are many existing cache replacement
algorithms for example LRU, LFU, MRU, FIFO etc. Existing algorithms consume a lot of energy while replacing cold blocks of data.
Replacement algorithms are usually designed to reduce miss rate and increase hit rate. These algorithms replace cold blocks (not going to use
in future) and due to large number of cold blocks, they consume lot of energy. This paper proposes an energy and computation efficient cache
replacement algorithm that put only hot blocks in action instead of removing cold blocks. This paper also discusses different replacement
algorithms proposed in different papers and compare these algorithms on basis of different parameters mainly energy consumption. In our
experiments we have found LRU and FIFO as best replacement algorithms for Increased hit rates and Energy efficiency respectively.
Key Performance Index of Increasing Air Quality
with Construction Schedule Control
Hyoung-Chul Lim1, Dongheon Lee2, Dong-Eun Lee3, Daeyoung Kim4
1Professor, 2Doctorial Course, School of Architectural Engineering, Changwon National University, Korea
3Professor, School of Architecture & Civil Engineering, Kyungpook National University, Korea
4Professor, Department of Architecture, Kyungnam University, Korea
Abstract: Recently, air quality in residential spaces has been major concern. In particular, the indoor air quality of residential facility
before occupancy, which is related to the interior material, is a serious problem. existing research has mainly focused on pollution control
after construction, but this research has derived I key performance index I about increasing air quality and priority of management with a
controlling schedule. That is the objectives of research. The results show the relative priority of the four major items in wall‐based apartment
buildings and in column‐based apartment buildings. An analysis of the parties responsible for improvement based on the IAQ results shows
more efforts to improve IAQ are needed in material factories and engineering/design companies.
Core conferences bta 19 paper 2
Exploring Revitalization Solutions: Engaging
Community through Media Architecture
Behzad Shojaedingivi1
1University of Tehran
Abstract: This paper aims to investigate Media Architecture and its potentials for culturally based revitalization. Media Architecture
presents a new approach based on Augmentation concepts, in which projects are designed and implemented adopting contemporary mediums
in an aesthetic way in order to attract the presence of a more cultural audience and increase the participation of the local residents.
Ultimately this will lead to an increase of interaction between different classes in neglected areas and strengthen their connection to their
built environment. This is an interdisciplinary approach in which architecture and contemporary mediums are combined aesthetically with
the aim of creating revival solutions in neglected areas.
Criteria of Creating Social Interaction for Green
Open Space in Karkh, Iraq
Sarah Abdulkareem Salih1, Sumarni Ismail2
1Master Student, 2Lecturer, Department of Architecture, Universiti Putra Malaysia, Malaysia
Abstract: This paper outlines the issue on open spaces, which led to decrease social interaction among residents in Baghdad city
nowadays. The main objective of the paper is to identify the criteria of green open spaces to achieve sound social interaction in Baghdad city,
Iraq. This paper employed quantitative method, in the form of survey, for data collection. Data were obtained from questionnaires, through
the selection of 270 respondents in a single-stage random procedure from ten specific neighbourhoods in Karkh district. The study findings
confirm that open spaces and parks is essential to enhance social interaction by implementing appropriate criteria in that open spaces or
parks. The results of this study are useful reference for urban and landscape planners, architects, social psychologists, the Municipality of
Baghdad, and researchers in this field.
CoreConferences Batch A 2019
The CoreConferences 2019 held on 20th – 21st March, 2019, in collaboration with Association of Scientists, Developers and Faculties (ASDF), an International body, at Taipei, Taiwan. CoreConferences 2019 provides a chance for Academic and Industry professionals to discuss the recent progress in the area of Multiple. The outcome of the conference will trigger for the further related research and future technological improvement. This conference highlights the novel concepts and improvements related to the research and technology.
International Conference on Cloud of Things and Wearable Technologies 2018
International Conference on Cloud of Things and Wearable Technologies 2018Association of Scientists, Developers and Faculties
ICCOTWT 2018 will be the most comprehensive conference focused on the various aspects of Cloud of Things and Wearable Technologies. This Conference provides a chance for academic and industry professionals to discuss recent progress in the area of Cloud of Things and Wearable Technologies. Furthermore, we expect that the conference and its publications will be a trigger for further related research and technology improvements in this important subject.
The goal of this conference is to bring together the researchers from academia and industry as well as practitioners to share ideas, problems and solutions relating to the multifaceted aspects of Cloud of Things and Wearable Technologies.ICCELEM 2017
The International Conference on Computer, Engineering, Law, Education and Management (ICCELEM 2017)” held on 28 - 29th September 2017, in collaboration with Association of Scientists, Developers and Faculties (ASDF), an International body, at The Westin Chosun Seoul, Seoul, South Korea.
ICSSCCET 2017
The Third International Conference on “Systems, Science, Control, Communication, Engineering and Technology (ICSSCCET 2017)” held on 16 - 17th February 2017, in collaboration with Association of Scientists, Developers and Faculties (ASDF), an International body, at Teegala Krishna Reddy Engineering College, Hyderabad, India, Asia.
ICAIET 2017
The First International Conference on “Advanced Innovations in Engineering and Technology (ICAIET 2017)” held on 14th - 15th Feb 2017, in collaboration with Association of Scientists, Developers and Faculties (ASDF), an International body, at Rohini College of Engineering and Technology, Tamilnadu, India, Asia.
ICICS 2017
The First International Conference on “Intelligent Computing and Systems (ICICS 2017)” held on 13th - 14th February 2017, in collaboration with Association of Scientists, Developers and Faculties (ASDF), an International body, at NSN College of Engineering and Technology, Karur, Tamilnadu, India, Asia.
ICACIEM 2017
The First International Conference on “Advances & Challenges in Interdisciplinary Engineering and Management 2017 (ICACIEM 2017)” held on 11 – 12th February 2017, in collaboration with Association of Scientists, Developers and Faculties (ASDF), an International body, at Vidyaa Vikas College of Engineering and Technology, Tiruchengode, Tamilnadu, India, Asia.
A Typical Sleep Scheduling Algorithm in Cluster Head Selection for Energy Eff...
A Typical Sleep Scheduling Algorithm in Cluster Head Selection for Energy Eff...Association of Scientists, Developers and Faculties
Wireless sensor networks can provide low cost solution accompanied with limited storage, computational capability and power for verity of real-world problems and become essential factor when sensor nodes are arbitrarily deployed in a hostile environment. The cluster head selection technique is also one of the good approaches to reduce energy consumption in wireless sensor networks. The lifetime of wireless sensor networks is extended by using the uniform cluster head selection and balancing the network loading among the clusters. We have reviewed various energy efficient schemes apply in WSNs of which we concentrated on selection of cluster head approach and proposed an new method called Sleep Scheduling Routing with in clusters for Energy Efficient [SSREE]in which some nodes in clusters are usually put to sleep to conserve energy, and this helps to prolong the network lifetime. EASSR selects a node as a cluster head if its residual energy is more than system average energy and have less energy consumption rate in previous round. Then, an Performance analysis and compared statistic results of SSREE shows of the significant improvement over existing protocol LEACH, SEP and M-GEAR protocol in terms of lifetime of network and data units gathered at BS.Raindrop Algorithm Based Controller for Chopper Driven PMDC Motor
Raindrop Algorithm Based Controller for Chopper Driven PMDC MotorAssociation of Scientists, Developers and Faculties
Permanent Magnet DC motors find wide applications in orthopaedic surgical systems. Conventional PI controller based chopper drive is being employed in these motor drives. To enhance the performance of the drive, this paper suggests, an efficient Raindrop algorithm based speed controller. The proposed drive system has been simulated using Mat lab/Simulink. The simulated results have been validated using a low cost PIC microcontroller based experimental setup. The comparative study demonstrates that the proposed system has an edge over the conventional drive systems.A Study on Customer Satisfaction towards Ambal Auto, Erode
A Study on Customer Satisfaction towards Ambal Auto, ErodeAssociation of Scientists, Developers and Faculties
Customer satisfaction is the main problem prevailing now-a-days in all the Companies. Satisfying the customers is the big gain for any company. Marketing managers have to analyse the taste and preferences of the customers in order to satisfy their needs. The present study is to analyse the Customer Satisfaction with special reference to Ambal Auto Ltd, Erode. Questionnaire method was used to know the views and suggestions of the customers.Biodiesel Prepared By Trans-esterification Technique from Waste Cooking Oil (...
Biodiesel Prepared By Trans-esterification Technique from Waste Cooking Oil (...Association of Scientists, Developers and Faculties
Squander cooking oils (WCO), which contain a lot of free unsaturated fats delivered in eateries, are gathered by the natural assurance office in many parts of the world and ought to be arranged reasonably. Because of the high cost of the new vegetable oil, squander cooking oil pulled in specialist to deliver bio-diesel from waste cooking oil since it is accessible with moderately shabby cost. In this venture paper, the Trans esterification of waste cooking oil with methanol and in addition the fundamental employments of the unsaturated fat methyl esters is looked into. The cooking oil was trans esterified with methanol utilizing potassium hydroxide as impetus to acquire bio-diesel by Magnetic Stirrer creation method was done. Comes about which acquired are altogether similar to immaculate diesel and gives preferable execution over routine diesel fuel.More from Association of Scientists, Developers and Faculties (20)
International Conference on Cloud of Things and Wearable Technologies 2018
International Conference on Cloud of Things and Wearable Technologies 2018
A Typical Sleep Scheduling Algorithm in Cluster Head Selection for Energy Eff...
A Typical Sleep Scheduling Algorithm in Cluster Head Selection for Energy Eff...
Raindrop Algorithm Based Controller for Chopper Driven PMDC Motor
Raindrop Algorithm Based Controller for Chopper Driven PMDC Motor
A Study on Customer Satisfaction towards Ambal Auto, Erode
A Study on Customer Satisfaction towards Ambal Auto, Erode
Biodiesel Prepared By Trans-esterification Technique from Waste Cooking Oil (...
Biodiesel Prepared By Trans-esterification Technique from Waste Cooking Oil (...
Recently uploaded
在线办理(ANU毕业证书)澳洲国立大学毕业证录取通知书一模一样
学校原件一模一样【微信：741003700 】《(ANU毕业证书)澳洲国立大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Vaccine management system project report documentation..pdf
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
The Benefits and Techniques of Trenchless Pipe Repair.pdf
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Cosmetic shop management system project report.pdf
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Top 10 Oil and Gas Projects in Saudi Arabia 2024.pdf
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
一比一原版(SFU毕业证)西蒙菲莎大学毕业证成绩单如何办理
SFU毕业证原版定制【微信：176555708】【西蒙菲莎大学毕业证成绩单-学位证】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
学历顾问：微信：176555708
Courier management system project report.pdf
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
J.Yang, ICLR 2024, MLILAB, KAIST AI.pdf
Language-Interfaced Tabular Oversampling Via Progressive Imputation And Self Autentication
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
WATER CRISIS and its solutions-pptx 1234
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSE
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Recently uploaded (20)
LIGA(E)11111111111111111111111111111111111111111.ppt
LIGA(E)11111111111111111111111111111111111111111.ppt
Vaccine management system project report documentation..pdf
Vaccine management system project report documentation..pdf
Pile Foundation by Venkatesh Taduvai (Sub Geotechnical Engineering II)-conver...
Pile Foundation by Venkatesh Taduvai (Sub Geotechnical Engineering II)-conver...
block diagram and signal flow graph representation
block diagram and signal flow graph representation
The Benefits and Techniques of Trenchless Pipe Repair.pdf
The Benefits and Techniques of Trenchless Pipe Repair.pdf
Cosmetic shop management system project report.pdf
Cosmetic shop management system project report.pdf
Top 10 Oil and Gas Projects in Saudi Arabia 2024.pdf
Top 10 Oil and Gas Projects in Saudi Arabia 2024.pdf
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSE
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSE
Shared Cluster Decision Assembly method using sky Traffic-Flow Organization
- 1. International Conference on Advances & Challenges in Interdisciplinary Engineering and Management 42 ` International Conference on Advances & Challenges in Interdisciplinary Engineering and Management 2017 [ICACIEM 2017] ISBN 978-81-933235-1-9 VOL 01 Website icaciem.org eMail icaciem@asdf.res.in Received 10 – January – 2017 Accepted 28 - January – 2017 Article ID ICACIEM083 eAID ICACIEM.2017.083 Shared Cluster Decision Assembly method using sky Traffic-Flow Organization K Meiyalakan1 , G Padmapriya2 , P J Shriidhar3 1 Associate Professor, 2 Professors, 3 Assistant Professor, Department of CSE, Vidyaa Vikas College of Engineering and Technology, Tiruchengode, India Abstract: Initially linear dataset is formed for capable recovery of data from a massive record. Before undergoing the process of data sighting feature reduction route is implemented. This reduces the dimensionality and increases the space of data cargo space. Hence the map reduce is processed for the next step in knowledge discovering process to remove unwanted and irrelevant data from the database. The Support Vector Machine is one of the classifications technique is used. This overcome the problem of k Means disadvantage, it does not support effectively for both linear and nonlinear format of data. Map Reduce method to add privacy to a huge database can be obtained by adding dual authentication technique which ensures the privacy of the user without over heading the process. This overcomes the overlapping issue caused by the k means algorithm and it also reduces the issue of finding the distance between the record and cluster. ISBN 978-81-933235-1-9 VOL 01 Website icaciem.org eMail icaciem@asdf.res.in Received 10 – January – 2017 Accepted 28 - January – 2017 Article ID ICACIEM084 eAID ICACIEM.2017.084 Analysis of Micro-Channel Heat Exchangers K Dinesh Kumar1 , G Gunasekaran2 , P Jaya Kumar3 , P Jeeva4 , K Karthick5 1,2,3,4,5 UG scholar, Department of Mechanical Engineering, Vidyaa Vikas College of Engineering and Technology, Tiruchengode, India Abstract: Due to the high performance of electronics components, Heat dissipation becomes a significant issue for stable operation of components. Micro channels provide very high heat transfer coefficients because of their small diameters. In this study, two dimensional fluid flow and heat transfer in a rectangular micro channel heat sink are analysed using FLUENT as solver with water as cooling fluid. With strong literature study it is found that down to 50 μm of hydraulic diameter, macro scale model can be applicable. Three channels of height 50 μm, 100 μm and 150 μm are considered. The study is mainly focused on Nussle Number and height effects on micro channel thermal performance. The highest temperature is encountered at the heated surface of the heat sink immediately above the channel outlet. This paper is prepared exclusively for International Conference on Advances & Challenges in Interdisciplinary Engineering and Management 2017 [ICACIEM 2017] which is published by ASDF International, Registered in London, United Kingdom under the directions of the Editor-in-Chief Dr K Samidurai and Editors Dr. Daniel James, Dr. Kokula Krishna Hari Kunasekaran and Dr. Saikishore Elangovan. Permission to make digital or hard copies of part or all of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage, and that copies bear this notice and the full citation on the first page. Copyrights for third-party components of this work must be honoured. For all other uses, contact the owner/author(s). Copyright Holder can be reached at copy@asdf.international for distribution. 2017 © Reserved by Association of Scientists, Developers and Faculties [www.ASDF.international]