Genetics homework1. The rut site involved in Rho-dependent termina.pdf

•

0 likes•2 views

Genetics homework 1. The rut site involved in Rho-dependent termination is what type of molecule? DNA RNA Protein Two of the above. All of the above. 2. Life forms on a newly discovered exo-planet (planet found outside of our solar system) are very similar to those found on Earth, except their proteins are made of 128 different amino acids. Otherwise, their DNA and RNA compositions are identical to those found on Earth. This observation suggests that the codons coding for the amino acids are likely to be at least how many bases long? 2 3 4 5 6A. DNAB. RNAC. ProteinD. Two of the above.E. All of the above. Solution 1) the answer is RNA - SsRNA.. It is a protein which is involved in the termination of transcription.!! It acts on the SsRNA after the open reading frame where there is G/C less sequence..!! 2) the answer is 4.. As 4^ 3 = 64 codes for 20 amino acids so we can say that there is degeneracy.. If there is 64 codons it will code for only 64 amino acids for outer organism. But there are 128 amino acids given Similarly, 4^4= 256 which can code for 128 a.a including degeneracy as it is closest of no of amino acids.

Education

Similar to Genetics homework1. The rut site involved in Rho-dependent termina.pdf

Chapter 10

guest67f2eb

Biology - Chp 12 - DNA & RNA - PowerPoint

Mr. Walajtys

BCHM 415- Restriction_enzymes.pptx

ABUBAKARYAKUBUSADDEE1

Motiffs

GGS Medical College/Baba Farid Univ.of Health Sciences.

Chapter 6 transcription and translation

amandasclass42

Genetic code and transcription

Anfal Izaldeen AL KATEEB

Genetic code and transcription

Anfal Izaldeen AL KATEEB

Genetic Code

Balaji Thorat

dna and rna.ppt

ClarenceMarasiganCas

Recombinant DNA Technology -2015

ARPUTHA SELVARAJ A

Central Dogma of Molecular Biology

Jonalyn Asi

Lesson 13.2

Javier Aguirre

Genetica molecular

Josué Moreno Marquina

Protein Syntheis

allyjer

genetic code.pptx

Nageen3

Genetic code

Rinaldo John

The Structure of DNA and RNA

Eneutron

Differentiated Fern Research Paper

Alison Reed

NUCLEOTIDES,NUCLEIC ACID AND HEREDITY.ppt

JaylaMaeMarcellana

Structure of RNA.pptx

salman91742

Similar to Genetics homework1. The rut site involved in Rho-dependent termina.pdf (20)

Chapter 10

Biology - Chp 12 - DNA & RNA - PowerPoint

BCHM 415- Restriction_enzymes.pptx

Motiffs

Chapter 6 transcription and translation

Genetic code and transcription

Genetic Code

dna and rna.ppt

Recombinant DNA Technology -2015

Central Dogma of Molecular Biology

Lesson 13.2

Genetica molecular

Protein Syntheis

genetic code.pptx

Genetic code

The Structure of DNA and RNA

Differentiated Fern Research Paper

NUCLEOTIDES,NUCLEIC ACID AND HEREDITY.ppt

Structure of RNA.pptx

More from arpittradersjdr

When light strikes chlorophyll of photosystem II, a molecule loses electrons to an electron transport chain. What molecule donates electrons to chlorophyll so that chlorophyll doesn\'t run out of electrons? NAOPH water oxygen light Water molecules stick to other water molecules because ... water molecules are neutral, and neutral molecules are attracted to each other hydrogen bonds form between the hydrogen atoms of one water molecule and the oxygen atoms of other water molecules covalent bonds form between the hydrogen atoms of one water molecule and the oxygen atoms of other water molecules the hydrogen atoms of adjacent water molecules are attracted to one another What is the fundamental difference between covalent and ionic bonding? In a covalent bond, the partners have identical electronegativity, in an ionic bond, one them is more electronegative. In a covalent bond, the atoms Share a pair of electrons; in an ionic bond, one atom an electron from the other In covalent bonding, both partners end up with filled outer electron shells in ionic one partner does and the other does not Covalent bonds form between atoms of the same element; ionic bonds, between different element What major event occurs during the final phase of the Calvin Cycle (the regeneration Sunlight is used make CO_2 CO_2 are used to make sugar molecules A TP is used to make chlorophyll ATP is used to make RuBP molecules The following diagram depicts the energy changes associated with what type Solution 6. Water. Light dependent hydrolysis of one molecule of water releases 2 electrones that are shuttled into the photosynthesis II. 7. b. water molecules form intra-molecular hydrogen bonding (between oxygen of one molecule to hydrogen of other moleccule) because of which they attach to each other. 8. b. Covalent bonds share a pair of electrones whereas in an ionic bond there is a transfer of electrones from one electronic species to another. 9. d. ATP is used to regenerate RuBP. 3 ATP molecules are used to regenerate RuBP from glyceraldehyde-3-phosphate..

When light strikes chlorophyll of photosystem II, a molecule loses el.pdf

arpittradersjdr

You have persuaded XelPharm\'s CIO that wireless networking would benefit many of the company\'s employees. However, he requests that you plan the network carefully and begin with a pilot network before migrating hundreds of clients to use wireless technology. You decide to begin with a pilot network in the distribution facility. The distribution facility is 200 feet long by 120 feet wide. It houses 45 employees during each shift, all on the same floor. What is your first step in planning the pilot network? As part of your later planning, draw the network, including the quantity and optimal placement of access points. What pitfalls, some unique to this environment, are you careful to avoid? What wireless standard do you recommend and why? Solution There are many factors that need to consider before developing wireless network like cost, bandwidth, use and devices that need to deploy in network following are some points that need to consider for planning network There are a number of reasons for a company to implement wireless networking. Wi-fi makes it much easier for workers to connect to the LAN from their laptops in conference rooms, break rooms, and other areas that may not have wired Ethernet jacks (or may not have enough for the number of people present). A wireless network also provides a way for you to allow visitors to access the Internet with their laptops or handhelds (for example, to check their e-mail).Rolling out a wireless LAN within your organization, however, is more complicated than just plugging in a wireless access point (WAP). You need to address a number of factors in the planning stage to ensure both accessibility and security. Steps to pilot network:- 1) Establish a pilot that will test and confirm how wireless can work within your business campus and needs. 2) Tie in Internet access and a robust data security system. 3) Install wireless access points, and equip notebook PCs for wireless use (e.g., provide PC cards or upgrade to PCs with integrated wireless connectivity built in). 4) Train and turn your participants loose with their wireless notebook PCs. 5 After the pilot, build on what you learn to broaden your wireless LAN (WLAN) to cover other areas and users. Here are some of the things you should consider as you prepare to go wireless :- The first step in planning your wi-fi deployment is to determine who will be using your wireless network. This can affect network design. If the wireless network is primarily to give visitors Internet access, you will want to isolate it from your wired LAN, perhaps by placing it in a DMZ. If the wireless LAN is for the use of your workers, you will need to give them access to resources on the wired corporate network without compromising the security of the main LAN. If both outsiders and employees need wireless, you may want to establish two separate WLANs to meet the needs of each. The next step is to look at what type of traffic will flow over the WLAN. This analysis is necessa.

You have persuaded XelPharms CIO that wireless networking would be.pdf

arpittradersjdr

Where do vesicles come fromA. Plasma membranceB. Nuclear membra.pdf

arpittradersjdr

Which of the following are statements 1. She is a mathematics maj.pdf

arpittradersjdr

What problem was IETF DiffServ supposed to solve? How did IETF DiffServ solve this problem? Does IETF DiffServ cost the network any overhead? Does IETF DiffServ cause delay in the network? What does IETF DiffServ not solve? What problem was IETF IntServ supposed to solve? How did IETF IntServ solve this problem? Does IETF IntServ cost the network any overhead? Does IETF IntServ cause delay in the network? What does IETF IntServ not solve? With the aid of an example, describe how RSVP works. Solution How RSVP Works Basically,RSVP is based on signaling messages that traverse the network, allocating resources along the way. RSVP is receiver-initiated, because sender initiation does not scale well to large, multicast scenarios in which there are heterogeneous receivers. In multicast scenarios, the application server sends out only one PATH message to multiple receiving computers, thus conserving network bandwidth. In the case of multicast traffic flows, RESV messages from multiple receivers are merged by taking the maximum values requested. RSVP approaches to send data with best possible effort. Following is the basic example how RSVP messages flow between a sender and receiver, through the admission control host and intermediary hops. Following steps involve in process of RSVP- 1. The multimedia server sends a PATH message requesting priority bandwidth to the QoS ACS host . The message is ultimately headed to the receiver of the data. In the case of multicast (multiple receivers), the PATH message is sent to the multicast address and received by all hosts that are members of the multicast group. Note that it is RSVP messages that are passed to the QoS ACS, not the data packets ultimately transmitted from sender to receiver. Until confirmation of a reservation is received with a RESV message, data for the connection is sent at a best-effort service level from the sending host. The best-effort service type instructs the RSVP SP to use the application or service\'s QoS parameters as guidelines for service quality requests, and makes reasonable effort to maintain the requested level of service. It does not make any guarantees that requested QoS parameters are implemented or enforced. 2. If a QoS ACS server is present in the local subnet, the PATH message is routed via the QoS ACS server. In this example, a QoS ACS host approves the request and forwards it to the receiver (client). The PATH message travels through the network to the receiver, along the data path determined by the network routing protocol. 3. A PATH state is maintained at each hop. Each PATH state contains a copy of the PATH message and the IP address of the previous hop. 4. When a PATH message arrives at the intended receiver, the receiving host responds by sending a RESV message that reserves the resources along the same network path traveled by the PATH message. Here, the receiver creates a RESV message, indicating that it wants to receive the data from the multimedia server. 5. Th.

What problem was IETF DiffServ supposed to solve How did IETF DiffS.pdf

arpittradersjdr

what causes hydrogen bonds to form between polar molecules? Solution Polar molecules are those, which dissociate in water and releases hydrogen (H+) or hydroxyl ions (OH-). The partially charged opposite charges attract together, which results in hydrogen bonding. For example, water molecules are held together by hydrogen bonding due to the opposite partially polarity of hydrogen and hydroxyl ions..

what causes hydrogen bonds to form between polar moleculesSolut.pdf

arpittradersjdr

What are the four main factors involved in the movement of ions across the cell membrane in the steady-state condition? Solution The four main factors are 1. Temperature ( increase in temperature makes membrane more permeable) 2. pH ( membrane is more permeable in optimum pH) 3.membrane potential (increase or decrease of the uptake of certain molecules or ions is dependent on membrane potential. It increases with increasing potential) 4. Number of the channels present in the membrane ( simply with the increase of number of channels more ions can pass through it).

What are the four main factors involved in the movement of ions acro.pdf

arpittradersjdr

Transitional epithelium L x) strained columnar epimeeliamL X) Solution Keratinized stratified squamous epithelium: Location: skin layers and layers of tissues which undergoes abrasion Function: supporting membranes Stratified columnar epithelium: Location: uterus wall lines, bronchiolar lining, gall bladder lines Function: secretion of mucous and enzymes etc Stratified cuboidal epithelium: Location: secretory areas of glands, ovaries etc Function: secretion of proteins Transitional epithelium is a stratified epithelium mainly existing in urothelium, urinary bladder, prostrate and intercellular adhesion is essential for cell to cell communication & these are existing where the epithelial tissues subjecting to traction & pressure. The prominent intercellular adhesions existing in transitional epithelium are occluding junctions (zonula occludens, zonula adherens (existing in prostrate), tight junctions, anchoring adhesive junctions between cells (desmosomes), gap junctions (connexins) between the cells. Some of the junctions are promoting intercellular adhesion in transitional epithelium..

Transitional epithelium L x) strained columnar epimeeliamL X) Sol.pdf

arpittradersjdr

The alpha-helix shown below is part of a water-soluble, globular protein. Note that some amino acids point \"toward\" you (Lys, Glu, Ser, Asp, etc.) and some point \"away\" from you (Phe, Ile, Val, Ile, etc.). Which side of the helix (the side with the amino acids pointing \"toward\" you or the side with the amino acids pointing \"away\" from you) would likely be the side of the helix that is in contact with the cytoplasm (the watery fluid inside all cells), as opposed facing inward toward the \"core\" of the protein? Solution Lys, Ser, Glu and Asp are hydrophilic amino acids whereas Phe, Ile, Val, Ile are hydrophobic amino acids. Hydrophilic amino acids seek contact with water whereas hydrophobic amino acids do not. The hydrophilic amino acids tend to be on the outside of the protein molecules. Therefore the hydrophilic amino acids would be in contact with the cytoplasm. The hydrophobic amino acids would tend to orient towards the interior of the folded protein molecule..

The alpha-helix shown below is part of a water-soluble, globular prot.pdf

arpittradersjdr

Simple squamous epithelium is structured to best provide: A. Diffusion of substances across the membrane B. Protection/withstanding wear and tear C. Secretion and absorption D. Receptor Mediated Endocytosis E. Ability to stretch without tearing Which of the following cells is not a resident cell found in peripheral Connective Tissue? A. Oligodendrocytes B. Macrophages C. Mast cells D. Phagocytes E. Fibroblasts Which of the following is NOT true of the Na+/K+ pump? A. It is an active transport mechanism requiring ATP expenditure. B. It pumps Na+ out of the cell and K+ in to the cell at a rate of 2 Na+ for every 3 K+. C. It contributes to a cell\'s resting membrane potential D. It helps to establish an overall negative intracellular charge. E. all of the above Which of the following is NOT correct regarding cardiac muscle tissue? A. This tissue is highly mitotic. B. It is contain of actin and myosin proteins. C. It is considered involuntary muscle tissue. D. It is a type of striated muscle tissue. E. None of the above are correct Blood in the venous system is returning to the ________side of the heart to be pumped to the _____________. A. left, lungs B. right, lungs C. D. right, body A. Diffusion of substances across the membrane B. Protection/withstanding wear and tear C. Secretion and absorption D. Receptor Mediated Endocytosis E. Ability to stretch without tearing Solution 1. A. Diffusion of substances across the membrane. simple squamous epithelium is a single layer of flat cells in contact with the basal lamina (one of the two layers of the basement membrane) of the epithelium.This type of epithelium is often permeable and occurs where small molecules pass quickly through membranes via filtration or diffusion. Simple squamous epithelia are found in capillaries, alveoli, glomeruli, and other tissues where rapid diffusion is required. It is also called pavement epithelium due to its tile-like appearance. This epithelium is associated with filtration and diffusion.This tissue is extremely thin, and forms a delicate lining. 2. A.Oligodendrocytes . These cells occur in nervous tissue. 3. B. It pumps Na+ out of the cell and K+ in to the cell at a rate of 2 Na+ for every 3 K+. Na-K pump pumps 3 Na+ out in exchange of 2 K+ ions. 4. A. This tissue is highly mitotic. 5. B. right, lungs. Venous blood returns to right side of heart (right auricle) and is pumped to lungs for oxygrnation..

Simple squamous epithelium is structured to best provideA. Diffus.pdf

arpittradersjdr

A tower leans at an angle of about 84.7°. The figure shows that 150 .pdf

arpittradersjdr

A sample of 200 people were asked to identify their major source of .pdf

arpittradersjdr

Prolog programming … Using Amzi Prolog, create and test prolog clauses to perform relation between mother,father, sister, brother, nephew, granddad, grandmother. (make up something interesting relating to families.) Solution %trace predicates father(symbol,symbol) mother(symbol,symbol) male(symbol) female(symbol) sister(symbol,symbol) brother(symbol,symbol) uncle(symbol,symbol) wife(symbol,symbol) aunty(symbol,symbol) sisterinlaw(symbol,symbol) cousin(symbol,symbol) nephew(symbol,symbol) grand_son(symbol,symbol) grand_duaghter(symbol,symbol) clauses sister(X,Y) :- father(X,A),father(Y,A),female(Y). father(dhanjiBhai,vithhaldas). father(chuniBhai,vithhaldas). father(harshad,dhanjibhai). father(darshan,dhanjibhai). father(nilam,dhanjibhai). father(kiran,dhanjibhai). father(kamleshbhai,chunibhai). mother(harshad,prabhaben). mother(X,Y) :- father(X,Z),wife(Y,Z). brother(X,Y) :- father(X,A),father(Y,A),male(X). % brother(X,Y) :- brother(Y,X). male(harshad). male(darshan). male(dhanjibhai). male(chunibhai). female(nilam). female(kiran). female(prabhaben). female(nimishaben). female(kokilaben). wife(prabhaben,dhanjibhai). wife(nimishaben,kamleshbhai). Wife(kokilaben,chunibhai). grand_son(X,Y) :- father(A,Y),father(X,A),male(X). grand_duaghter(X,Y) :- father(A,Y),father(X,A),female(Y). uncle(X,Y) :- father(X,Z),brother(Y,Z). aunty(X,Y) :- wife(Y,Z), brother(Z,W), father(X,W). sisterinlaw(X,Y) :- wife(X,Z),cousin(Y,Z),female(X). cousin(X,Y) :- father(X,A),father(Y,B),brother(A,B). nephew(X,Y) :- wife(Y,A),brother(A,B),father(X,B),male(X)..

Prolog programming …Using Amzi Prolog, create and test prolog clau.pdf

arpittradersjdr

in java Can we create an object of type Interface? Explain your answer. Solution No, we cannot create an instance of interface in java because interface contains only abstract methods (ie. methods which are only declared) and as abstract methods do not have a body (of implementation code), we cannot create an object of interface. Though we can create instance of the class implementing the interface. But we can refer to object that implements an interface. example, public interface Pet { } public class Dog implements A { } public static void main(String[] args) { Pet ob = new Dog(); //Pet test = new Pet(); // compilation error } Also, Anonymous classes can implement interfaces, and it is the only time a class implementing an interface without the \"implements\" keyword. It is possible to create Interface object with anonymous inner classes as shown below : interface Sample { public void display(); } class Demo { Sample p = new Sample() { public void display() { System.out.println(\"Interfce example.\"); } }; }.

in java Can we create an object of type Interface Explain your answ.pdf

arpittradersjdr

Implement a client server design using a UDP socket and features of TCP in Python. How do you make a TCP header and parse packets that your receive? Use SYNbit, FINbit and ACKbit to represent connection establishment and termination aftr 32 packets. Solution We can use Socket Module in Python Create a TCP_IP, TCP_PORT , Create a RAW socket and construct the ip packet where we can add tcp_flags , tcp_syn, tcp_ack , tcp_fin etc. Server 1. Create a socket bind the socket to some port 2. Listen and wait for some incoming connection 3. Accept the incoming connection, Read the message and appropriatly respond is send and accordingly SYN, ACK an FIN bits are updated Client 1. Create Socket and establish connection using SYN and ACK bits 2. Send data to server 3. Receive data from server.

Implement a client server design using a UDP socket and features of .pdf

arpittradersjdr

I need help in matlab.The task is echo removing from the signal.Suppose we have a musical signal include echoes, so we have to design the filter to remove echo. In attach pics, there is complete description about the question. where h[O] is the signal attenuation of the direct path between the source of music and the microphone, and h[k]for k >0 can be viewed as the coefficients of the echoes. Choose the coefficients of the echoes as follows: h[0] = 1, h[50001 0.5 h[90001 0.02 STEP 1 Compute, plot, and play the following music signal yfn: y[n] = h[k]x(n-k] k=0 where xfk] is your own original musical signal from project deliverable 2. When you listen to the y[n], you should feel the echoes in the signal. STEP 2: In the second step, we pretend like we do not know the original signal, and all we have is the musical signal with echoes, which is yln]. Now, your task is to design a filter, whose impulse response is denoted as gln), in order to remove the echoes. So, the overall system (including STEP 1 and STEP 2) looks like Solution %clearing window, variables and figures clear all; close all; clf; clc; n=10000; for i=1:1:19999 xa(i)=i-1; end x=rand(1,10000); h=zeros(1,10000); h(1)=1; h(5001)=0.5; h(9001)=0.2; y = conv(x, h); stem(xa,y); title(\'Signal with echo\'); soundsc(y); for i=1:1:19999 if i==1 v(i)=y(i)-y(i); elseif i==5001 v(i)=y(i)-0.5*y(i); elseif i==9001 v(i)=y(i)-0.2*y(i); else v(i)=y(i); end end figure; stem(xa,v) title(\'original signal\'); soundsc(v);.

I need help in matlab.The task is echo removing from the signal.Supp.pdf

arpittradersjdr

Human language uses less sounds and is less symbolic than are the communication systems used by other primates. is symbolic, arbitrary, is an open system, and uses displacement. is closed, non-arbitrary, and lacks displacement. is symbolic, closed, and lacks displacement. In which way is a human\'s big toe different from a chimpanzee\'s big toe? the human\'s big toe is divergent and capable of grasping. the chimp\'s big toe is divergent and capable of grasping. the chimp\'s big toe is located on the other side of the foot. chimps don\'t have a big toe. Which of the following is a trait that is characteristic of mammals? postnatal patterns that emphasize having fewer offspring but providing more parental care. all of the above Solution Answers : 1. b. Human language is symbolic, arbitory, is an open system and uses displacement. 2. b. The Chimp\'s big toe is divergent and capable of grasping. 3. d..

Human language uses less sounds and is less symbolic than are the co.pdf

arpittradersjdr

How to build a Linked List that can insert any type of data. For example: SLinkedList abc1; SLinkedList abc2; SLinkedlist abc3; Please answer in C plus plus, you don\'t need to develop all function, just insert data is enough. Thank you. Solution #include #include #define LEFT 2 #define RIGHT 3 typedef struct linked_list { double data; struct linked_list *next; }node;//node declaration for single linked list /*function prototype declaration*/ void insertion(node **,double); void erase(node **,node **); //void left_or_right(node **,node **,int); node *makenode(double); void show(node **,node **); /*main*/ int main() { system(\"clear\"); char choice; double item; node *start=NULL,*prev=NULL; do { printf(\"\ ===========================\ \\tMENU\ ===========================\ \\t1.Insert\ \\t2.Exit\ Enter your choice :: \"); scanf(\"\ %c\",&choice); switch(choice) { case \'1\': printf(\"\ Enter item :: \"); scanf(\"%lf\",&item); insertion(&start,item);//insert function calling show(&start,&prev); break; case \'2\': erase(&prev,&start); printf(\"\ You are exited from the whole program.\ \ \"); exit(1); default: printf(\"\ \\tWrong Choice\ \"); } } while(choice!=\'2\'); return 0; } void show(node **start,node **prev)/*this function displays the whole linked list*/ { if((*start)!=NULL) { printf(\"\ \ X <- \"); node *temp=NULL,*p=*prev,*q=NULL; while(p!=NULL) { if(temp==NULL) { temp=makenode(p->data); } else { q=makenode(p->data); q->next=temp; temp=q; } p=p->next; } while(temp!=NULL) { printf(\"%.0lf <- \",temp->data); q=temp; temp=temp->next; free(q); q=NULL; } printf(\"\\b| \"); p=*start; while(p!=NULL) { if(p==*start) { printf(\"%.0lf |-> \",p->data); } else { printf(\"%.0lf -> \",p->data); } p=p->next; } printf(\" X \ \ \"); } else { printf(\"\ \ \\tEmpty Linked List\ \ \"); } } void insertion(node **start,double item)//this function inserts a new node in the linked list { node *temp=makenode(item),*p=NULL; if(*start==NULL) { *start=temp; } else { p=*start; while(p->next!=NULL) { p=p->next; } p->next=temp; } } node *makenode(double item) { node *temp=NULL; temp=(node *)malloc(sizeof(node)); if(temp==NULL) { printf(\"\ Dynamic memory allocation failed.\ \"); exit(0); } temp->data=item; temp->next=NULL; } void erase(node **prev,node **start)//this function deletes all nodes of the linked list when the program terminates { node *p=NULL; while(*start!=NULL) { p=*start; *start=(*start)->next; free(p); p=NULL; } while(*prev!=NULL) { p=*prev; *prev=(*prev)->next; free(p); p=NULL; } }.

How to build a Linked List that can insert any type of data. For exa.pdf

arpittradersjdr

For the segment of code below display the contents of the Array Stack object s after each method call. The first line of code creates and initializes the Array Stack object S. When displaying the contents of the Array Stack S after each method call draw, Array Stack S\'s array data as you see below. Solution S s.push(9) s.push(2) ; s.pop(); s.push(7); s.push(6); s. push(12); push(16) pop(); pop(); push(4)9.

For the segment of code below display the contents of the Array Stack.pdf

arpittradersjdr

Explain the sources of police subculture. king undercover would affect an officer in terms of various components of police subeulture. Solution Answer- Part1 Police Subculture- It\'s the culture of Police Officers. Cops gathering at doughnut shops and eating doughnuts is part of police subculture which became popular. Cops are tied to the colour blue. They use police code even while not in the work-place. They call each other by their last names only outside of work as is standard practice while on the job. Part of cop subculture is to moonlight as bouncers, private eyes and other gigs when they can not get any overtime. Part of the culture is that cops live off their OT. If you look up how much cops get paid you\'ll find that OT is usually 20-50% of their wages. The culture has their slang. New Recruits are called Rooks/Boots. So, Police subculture is defined as a specific set of beliefs, attitudes, and behaviours exhibited by those in law enforcement. Because police officers spend the majority of their time dealing with crime, they tend to view members of the public as untrustworthy and potentially hostile. Sources of Police Subculture 1- Organization Factors Cont. 2- Night Shifts: 3- Street Environment 4- Culture-shaping implications between the police and citizens 5- Behavior can be influenced due to personal beliefs and circumstances that are encountered 6- Young officers get frustrated due to being disillusioned by the routine 7- Most common violent encounters that officers respond to are between friends and acquaintances, domestic situations also 8- Traffic stop interactions negatively affect police subculture, an encounter between officer and driver are doomed 9- Other Criminal Justice Agencies 10- Administration Cont. Answer- Part 2 Undercover officers are mainly hard-working minority men and women who grew up in some of the toughest neighbourhoods in the city who chose to come into the police and try to make a difference. And the police uses them. Working as an undercover would affect an officer in terms of various components of police subculture. Some Possible components could be as follows-: 1- Undercover agents are frequently required to be in hostile environments in which they give up control and do not have dominion. 2- The level of danger and unpredictability is markedly increased. 3- Their sense of moral superiority may be increased, as they spend more time surrounded by criminals. 4- Their sense of us versus them will have to be concealed to avoid giving themselves away. Their need for secrecy may extend to everyone they know to protect their cover, thus increasing their isolation. 5- Their bravery and ability to deceive are likely to be continually challenged..

Explain the sources of police subculture. king undercover would affec.pdf

arpittradersjdr

More from arpittradersjdr (20)