a=e^0.05 find the value of a a=1.05 now, P=10(1.05)^t the .pdf

•

0 likes•2 views

a=e^0.05 find the value of a a=1.05 now, P=10(1.05)^t the function represents exponential growth Solution a=e^0.05 find the value of a a=1.05 now, P=10(1.05)^t the function represents exponential growth.

Education

More from aparnawatchcompany

The Seliwanoffs Test is a test for ketoses. Of .pdf

aparnawatchcompany

The short answer is no. SN2 reactions are governed by several factors, the most important being how accessible and unhindered the substrate is. Easily accesible carbons such as primary carbons react readily and quickly. Secondary carbons will react too, though this occurs at a much slower rate. Tertiary carbons will not react at all due to steric hinderance. The nucleophile is unable to atttack the backside of the substrate, and since this is the essential mechanism that defines SN2, no reaction occurs. In the case of aspirin synthesis we must define the substrate and nucleophile. Acetic anhydride is the nucleophile (CH3CO2-) and salicylic acid is the substrate. If this were to act as an SN2 reaction, the nucleophile would have to attack the benzene carbon with the -OH group. First off, this carbon is tertiary, so it would not participate in this type of reaction. More importantly, this carbon is in a near-unbreakable benzene ring. Beside the massive amount of steric hinderance via the other ring carbons, this incorporation into the benzene ring does not leave the backside of the reactive carbon exposed. An SN2 reaction will not occur under any circumstance. Solution The short answer is no. SN2 reactions are governed by several factors, the most important being how accessible and unhindered the substrate is. Easily accesible carbons such as primary carbons react readily and quickly. Secondary carbons will react too, though this occurs at a much slower rate. Tertiary carbons will not react at all due to steric hinderance. The nucleophile is unable to atttack the backside of the substrate, and since this is the essential mechanism that defines SN2, no reaction occurs. In the case of aspirin synthesis we must define the substrate and nucleophile. Acetic anhydride is the nucleophile (CH3CO2-) and salicylic acid is the substrate. If this were to act as an SN2 reaction, the nucleophile would have to attack the benzene carbon with the -OH group. First off, this carbon is tertiary, so it would not participate in this type of reaction. More importantly, this carbon is in a near-unbreakable benzene ring. Beside the massive amount of steric hinderance via the other ring carbons, this incorporation into the benzene ring does not leave the backside of the reactive carbon exposed. An SN2 reaction will not occur under any circumstance..

The short answer is no. SN2 reactions are governed by several factor.pdf

aparnawatchcompany

Technology has taking milestone forwarding steps and they are using with trhose new advanced technologies of that computers. For example let us take one example among all those computer technologies. Mainly the technology i observed is now a days everyone using notepads for writing. Everyone user used top write in paper by using pens and thjese days we cannot see those. It is very important to notice that technology has devoleped alot and writing with the notepads and everything. Technology is devoleping day by day if any conflicts or errors that are occured in that, there may be chance of rectifying those and using more effectively and continuing with the next updated technologies. So they have to notice the conflists that are occured and keep on updating. There are not so much problems with the exisating technologies, because these are devoleping with the more strategic manner and with the perfect plkans and if anything wrong happens there may be a chance of changing those immediately so it is gradually increase the quality of them. Now a days everything is related to the technologies. From staring the day everyone is busy with the digital world it is mainly effecting everyone and now a days all group of people even small childrens are using these because they are technically aware of those tyechnologies. Yes i agree with the new technologies that are devoleping day by day because itr is making us very simple in our life for examle according to you cool pads, phones are using these4 are very much familiar with the peoiple because these can make the peoples work very easy. Solution Technology has taking milestone forwarding steps and they are using with trhose new advanced technologies of that computers. For example let us take one example among all those computer technologies. Mainly the technology i observed is now a days everyone using notepads for writing. Everyone user used top write in paper by using pens and thjese days we cannot see those. It is very important to notice that technology has devoleped alot and writing with the notepads and everything. Technology is devoleping day by day if any conflicts or errors that are occured in that, there may be chance of rectifying those and using more effectively and continuing with the next updated technologies. So they have to notice the conflists that are occured and keep on updating. There are not so much problems with the exisating technologies, because these are devoleping with the more strategic manner and with the perfect plkans and if anything wrong happens there may be a chance of changing those immediately so it is gradually increase the quality of them. Now a days everything is related to the technologies. From staring the day everyone is busy with the digital world it is mainly effecting everyone and now a days all group of people even small childrens are using these because they are technically aware of those tyechnologies. Yes i agree with the new technologies that are devoleping.

Technology has taking milestone forwarding steps and they are using .pdf

aparnawatchcompany

Solution(a)Basic DefLet R be a binary relation on a set A.R i.pdf

aparnawatchcompany

Section 4 we describe how theSolutionSection 4 we describe how.pdf

aparnawatchcompany

probability= 10100=0.1Simple.Solutionprobability= 10100=0..pdf

aparnawatchcompany

Plantaris muscle The plantaris is one of the superficial muscles of the superficial posterior compartment of the leg, one of the fascial compartments of the leg. It is composed of a thin muscle belly and a long thin tendon. While not as thick as the achilles tendon, the plantaris tendon (which tends to be between 30 and 45 cm in length) is the longest tendon in the human body. Not including the tendon, the plantaris muscle is approximately 5–10 cm long and is absent in 8-12% of the population. It is one of the plantar flexors in the posterior compartment of the leg, along with the gastrocnemius and soleus muscles. The plantaris is considered an unimportant muscle and mainly acts with the gastrocnemius. Function] The plantaris acts to weakly plantar flex the ankle joint and flex the knee joint. The plantaris muscle may also provide proprioceptive feedback information to the central nervous system regarding the position of the foot. The unusually high density of proprioceptive receptor end organs supports this notion. Its motor function is so minimal that its long tendon can readily be harvested for reconstruction elsewhere with little functional deficit. Often mistaken for a nerve by new medical students (and thus called the \"freshman nerve\"), the muscle was useful to other primatesfor grasping with their feet.[citation needed] Clinical significance A common injury that is normally attributed to the plantaris muscle is a condition called tennis leg. Although pain in the calf can be attributed to a rupture of the plantaris muscle, recent ultrasound research has shown that tennis leg more commonly arises from tears in the musculotendinous junction of the medial gastrocnemius. In one clinical study, 94 out of 141 patients (66.7%) diagnosed with tennis leg were found with a partial rupture of the gastrocnemius muscle while rupture of the plantaris tendon was only seen in 2 patients (1.4%) Injury may occur from running, jumping, or pushing off one leg as in sports such as tennis, basketball and soccer which require quick foot movement in a certain direction. Isolated plantaris muscle strains are rare and ruptures normally occur in concurrence with injury to other muscles in the posterior compartment of the lower leg. Symptoms of a plantaris muscle rupture may include an audible popping sound in the area during physical activity, swelling, pain in the posterior side of the lower leg, and persistent soreness. It may also be painful when trying to flex the ankle Anatomy of plantaris muscle: a study in adult Indians. Abstract AIM: The plantaris muscle (PM) and its tendon is subject to considerable variation in both the points of origin and of insertion. The present study was carried out to fi nd the different types of origin, insertion and possible variations of the PM in the population of southern costal region of India. MATERIALS AND METHODS: 52 embalmed (Formalin fixed) cadaver lower limbs of 26 males (age ranged 48-79 years, mean age 68 years) we.

Plantaris muscleThe plantaris is one of the superficial muscles of.pdf

aparnawatchcompany

I think... Highest energy = most polarized = h.pdf

aparnawatchcompany

P( 0 Z 1.5 )= P(Z1.5) - P(Z0)= 0.9332 - 0.5 (from table)= .pdf

aparnawatchcompany

Non-coded RNA are small RNA molecule that cannot be translated by host machinery. They are useful tools for medicine and research. Because they are RNA molecules so they can restrict the translation of mRNA. They are very useful for treatment of mutations and chromosomal abnormalities. On the basis of their functions, the following options are true. (Option 1) – To counteract viral infections. Viruses infect by expressing their RNA or expression after transcription of DNA. So, blocking the mRNA of virus is crucial to restrict their infections. (Option 2) - To block expression of an abnormal gene responsible for disease. (Option 4) – To analyze gene function by observing what occur when the gene’s expression is inhibited. *They cannot create mutations because they are not complementary to DNA. Solution Non-coded RNA are small RNA molecule that cannot be translated by host machinery. They are useful tools for medicine and research. Because they are RNA molecules so they can restrict the translation of mRNA. They are very useful for treatment of mutations and chromosomal abnormalities. On the basis of their functions, the following options are true. (Option 1) – To counteract viral infections. Viruses infect by expressing their RNA or expression after transcription of DNA. So, blocking the mRNA of virus is crucial to restrict their infections. (Option 2) - To block expression of an abnormal gene responsible for disease. (Option 4) – To analyze gene function by observing what occur when the gene’s expression is inhibited. *They cannot create mutations because they are not complementary to DNA..

Non-coded RNA are small RNA molecule that cannot be translated by ho.pdf

aparnawatchcompany

Option b is Settlement risk The Nonschedule L off-balance-sheet ri.pdf

aparnawatchcompany

mSolutionm.pdf

aparnawatchcompany

Just because two compounds have the same melting point does not mean that they exhibit similar interacting characterstics. Melting means that intermolecular bonds that hold molecules together are being broken. Sometimes, when adding impurities into a pure compound, these intermolecular bonds are disturbed by the presence of the impurity. Because of this, the solution will melt at a lower temperature than a pure solid due to disturbed intermolecular bonds (from a solid to another molecule of the same solid) T= H/S Another reason is the change in enthalpy (H) describes the amount of heat required to break the interactions between solid molecules in order to become a liquid. This value does not change much when you add an impurity. The change in entropy (S) describes the entropy gained when going from the much more ordered solid phase to the much less ordered liquid phase. Adding an impurity to the liquid phase increases the entropy of the liquid without affecting the entropy of the solid much; the end result is that S larger for a solid melting into an impure liquid than a pure liquid. Adding an impurity to the liquid phase causes S to increase without changing H. As you can see from the equation above, this situation must cause the melting point (T) to decrease. Therefore, adding an impurity, will cause a substance to melt at a lower temperature. Solution Just because two compounds have the same melting point does not mean that they exhibit similar interacting characterstics. Melting means that intermolecular bonds that hold molecules together are being broken. Sometimes, when adding impurities into a pure compound, these intermolecular bonds are disturbed by the presence of the impurity. Because of this, the solution will melt at a lower temperature than a pure solid due to disturbed intermolecular bonds (from a solid to another molecule of the same solid) T= H/S Another reason is the change in enthalpy (H) describes the amount of heat required to break the interactions between solid molecules in order to become a liquid. This value does not change much when you add an impurity. The change in entropy (S) describes the entropy gained when going from the much more ordered solid phase to the much less ordered liquid phase. Adding an impurity to the liquid phase increases the entropy of the liquid without affecting the entropy of the solid much; the end result is that S larger for a solid melting into an impure liquid than a pure liquid. Adding an impurity to the liquid phase causes S to increase without changing H. As you can see from the equation above, this situation must cause the melting point (T) to decrease. Therefore, adding an impurity, will cause a substance to melt at a lower temperature..

Just because two compounds have the same melting point does not mean.pdf

aparnawatchcompany

import java.awt.*; import java.awt.event.*; import javax.swing.*; public class StopWatch extends JPanel { private Timer myTimer1; public static final int ONE_SEC = 1000; //time step in milliseconds public static final int TENTH_SEC = 100; private Font myClockFont; private JButton startBtn, stopBtn, resetBtn; private JLabel timeLbl; private JPanel topPanel, bottomPanel; private int clockTick; //number of clock ticks; tick can be 1.0 s or 0.1 s private double clockTime; //time in seconds private String clockTimeString; public StopWatch() { clockTick = 0; //initial clock setting in clock ticks clockTime = ((double)clockTick)/10.0; clockTimeString = new Double(clockTime).toString(); myClockFont = new Font(\"Serif\", Font.PLAIN, 50); timeLbl = new JLabel(); timeLbl.setFont(myClockFont); timeLbl.setText(clockTimeString); startBtn = new JButton(\"Start\"); stopBtn = new JButton(\"Stop\"); resetBtn = new JButton(\"Reset\"); myTimer1 = new Timer(TENTH_SEC, new ActionListener() { public void actionPerformed(ActionEvent evt) { clockTick++; clockTime = ((double)clockTick)/10.0; clockTimeString = new Double(clockTime).toString(); timeLbl.setText(clockTimeString); //System.out.println(clockTime); } }); startBtn.addActionListener(new ActionListener(){ public void actionPerformed(ActionEvent evt){ myTimer1.start(); } }); stopBtn.addActionListener(new ActionListener(){ public void actionPerformed(ActionEvent evt){ myTimer1.stop(); } }); resetBtn.addActionListener(new ActionListener(){ public void actionPerformed(ActionEvent evt){ clockTick = 0; clockTime = ((double)clockTick)/10.0; clockTimeString = new Double(clockTime).toString(); timeLbl.setText(clockTimeString); } }); }//end of StopWatch constructor public void launchStopWatch() { topPanel = new JPanel(); topPanel.setBackground(Color.orange); bottomPanel = new JPanel(); bottomPanel.setBackground(Color.yellow); topPanel.add(timeLbl); bottomPanel.add(startBtn); bottomPanel.add(stopBtn); bottomPanel.add(resetBtn); this.setLayout(new BorderLayout()); add(topPanel, BorderLayout.CENTER); add(bottomPanel, BorderLayout.SOUTH); setSize(300,200); setBackground(Color.orange); }//end of launchClock public static void main(String[] args) { MyTestFrame myTestFrame1 = new MyTestFrame(); } } class MyTestFrame extends JFrame { StopWatch StopWatch1; public MyTestFrame() { super(\"My Stop Watch\"); setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); Container myPane = getContentPane(); StopWatch1 = new StopWatch(); StopWatch1.launchStopWatch(); myPane.add(StopWatch1); pack(); setVisible(true); } } Solution import java.awt.*; import java.awt.event.*; import javax.swing.*; public class StopWatch extends JPanel { private Timer myTimer1; public static final int ONE_SEC = 1000; //time step in milliseconds public static final int TENTH_SEC = 100; private Font myClockFont; private JButton startBtn, stopBtn, resetBtn; private JLabel timeLbl; private JPanel topPanel, bottomPanel; private int clockTick; //number of clock ticks; tick can .

import java.awt.; import java.awt.event.; import javax.swing..pdf

aparnawatchcompany

In humans, more common type of polymorphism is where both alleles are found in both populations but the expression of same kind of allele is based on the various factors between the two population. Environmental factors influence on the expression of same type of allele or different allele in both population. Migration can affect the frequency of expression of same allele when individuals from one population migrate to other population where there is expression of different allele. When all the members of first population carry different allele from other population, the migrated individuals from second population can change the frequency of first population. Solution In humans, more common type of polymorphism is where both alleles are found in both populations but the expression of same kind of allele is based on the various factors between the two population. Environmental factors influence on the expression of same type of allele or different allele in both population. Migration can affect the frequency of expression of same allele when individuals from one population migrate to other population where there is expression of different allele. When all the members of first population carry different allele from other population, the migrated individuals from second population can change the frequency of first population..

In humans, more common type of polymorphism is where both alleles ar.pdf

aparnawatchcompany

D) Na and Cl ions are strongly hydrated in aqueou.pdf

aparnawatchcompany

I think that first graphSolutionI think that first graph.pdf

aparnawatchcompany

f=mv2rSolutionf=mv2r.pdf

aparnawatchcompany

c) neither E nor Z .pdf

aparnawatchcompany

Eigenvalues and EigenvectorsLet A be an nSolutionEigenvalues.pdf

aparnawatchcompany

More from aparnawatchcompany (20)

The Seliwanoffs Test is a test for ketoses. Of .pdf

The short answer is no. SN2 reactions are governed by several factor.pdf

Technology has taking milestone forwarding steps and they are using .pdf

Solution(a)Basic DefLet R be a binary relation on a set A.R i.pdf

Section 4 we describe how theSolutionSection 4 we describe how.pdf

probability= 10100=0.1Simple.Solutionprobability= 10100=0..pdf

Plantaris muscleThe plantaris is one of the superficial muscles of.pdf

I think... Highest energy = most polarized = h.pdf

P( 0 Z 1.5 )= P(Z1.5) - P(Z0)= 0.9332 - 0.5 (from table)= .pdf

Non-coded RNA are small RNA molecule that cannot be translated by ho.pdf

Option b is Settlement risk The Nonschedule L off-balance-sheet ri.pdf

mSolutionm.pdf

Just because two compounds have the same melting point does not mean.pdf

import java.awt.; import java.awt.event.; import javax.swing..pdf

In humans, more common type of polymorphism is where both alleles ar.pdf

D) Na and Cl ions are strongly hydrated in aqueou.pdf

I think that first graphSolutionI think that first graph.pdf

f=mv2rSolutionf=mv2r.pdf

c) neither E nor Z .pdf

Eigenvalues and EigenvectorsLet A be an nSolutionEigenvalues.pdf

Recently uploaded

e-Sealing at EADTU by Kamakshi Rajagopal

EADTU

Transport (British English) or Transportation (American English) ransportation has developed along three basic Mode (Media):- 1. Land Transportation (way)– (a) Road Transportation (b) Rail Transportation 2. Water Transportation 3. Air Transportation Tramway Inland water transport Ocean transport These may be classified as under: (a). Liners (b). Tramps Liners Vs Tramps Figure- Layout airport runway design TRAFFIC SIGNS

Basic Civil Engineering notes on Transportation Engineering & Modes of Transport

Denish Jangid

PSYPACT- Practicing Over State Lines May 2024.pptx

Marlene Maheu

VAMOS CUIDAR DO NOSSO PLANETA! .

Colégio Santa Teresinha

ĐỀ THAM KHẢO KÌ THI TUYỂN SINH VÀO LỚP 10 MÔN TIẾNG ANH FORM 50 CÂU TRẮC NGHI...

Nguyen Thanh Tu Collection

Observing-Correct-Grammar-in-Making-Definitions.pptx

AdelaideRefugio

Trauma-Informed Leadership - Five Practical Principles

Pooky Knightsmith

UChicago CMSC 23320 - The Best Commit Messages of 2024

Borja Sotomayor

Improved Approval Flow in Odoo 17 Studio App

Celine George

Andreas Schleicher presents at the launch of What does child empowerment mean...

EduSkills OECD

Spellings Wk 4 and Wk 5 for Grade 4 at CAPS

AnaAcapella

When Quality Assurance Meets Innovation in Higher Education - Report launch w...

Gary Wood

An overview of the various scriptures in Hinduism

Dabee Kamal

Program code examples (known also as worked examples) play a crucial role in learning how to program. Instructors use examples extensively to demonstrate the semantics of the programming language being taught and to highlight the fundamental coding patterns. Programming textbooks allocate considerable space to present and explain code examples. To make the process of studying code examples more interactive, CS education researchers developed a range of tools to engage students in the study of code examples. These tools include codecasts (codemotion,codecast,elicasts), interactive example explorers (WebEx, PCEX), and tutoring systems (DeepTutor). An important component in all types of worked examples is code explanations associated with specific code lines or code chunks of an example. The explanations connect examples with general programming knowledge explaining the role and function of code fragments or their behavior. In textbooks, these explanations are usually presented as comments in the code or as explanations on the margins. The example explorer tools allow students to examine these explanations interactively. Tutoring systems, which engage students in explaining the code, use these model explanations to check student responses and provide scaffolding. In all these cases, to make a worked example re-usable beyond its presentation in a lecture, the explanations have to be authored by instructors or domain experts i.e., produced and integrated into a specific system. As the experience of the last 10 years demonstrated, these explanations are hard to obtain. Those already collected are usually “locked” in a specific example-focused system and can’t be reused. The purpose of this working group is to support broader re-used of worked examples augmented with explanations. Our current plan is to develop а standard approach to represent explained examples. This approach will enable an example created for any of the existing systems to be explored in a standard format and imported into any other example-focused system. We plan to follow a successful experience of the PEML working group focused on re-using programming exercises.

SPLICE Working Group:Reusable Code Examples

Peter Brusilovsky

male presentation...pdf.................

MirzaAbrarBaig5

ESSENTIAL of (CS/IT/IS) class 07 (Networks)

Dr. Mazin Mohamed alkathiri

Photos from our Spring Gala 2024. Thank you for making our 2024 Spring Gala unforgettable! Whether you attended or supported us with a donation, we extend our heartfelt thanks for celebrating School-Community Partnerships alongside ExpandED Schools. Special appreciation to our honorees, Rachel Skaistis and Cravath, Swaine, & Moore LLP, for their unwavering support in advancing educational equity. Your contributions have profoundly impacted countless young New Yorkers, and we’re proud to have you as part of our community. Our gratitude also extends to our Board of Directors, sponsors, city partners, community-based organizations, and the inspiring young people who joined us. Your support fuels our mission, and we’re endlessly thankful for your dedication. While we celebrate our gala’s success, our work continues. As you view the evening’s highlights, consider how you can further empower young New Yorkers and educators with your donation, no matter the size. Donate today: https://www.expandedschools.org/support-our-work/donate/

Spring gala 2024 photo slideshow - Celebrating School-Community Partnerships

expandedwebsite

This presentation covers the essential parameters of Unit 2 Operations Processes of the subject Operations & Supply Chain Management. Topics Covered: Volume Variety and Flow. Types of Processes and Operations Systems - Continuous Flow system and intermittent flow systems.Job Production, Batch Production, Assembly line and Continuous Flow, Process and Product Layout. Design of Service Systems, Service Blueprinting.

OSCM Unit 2_Operations Processes & Systems

Sandeep D Chaudhary

8 Tips for Effective Working Capital Management.pdf" This comprehensive guide, "8 Tips for Effective Working Capital Management", serves as a valuable resource for businesses aiming to optimize their financial operations. 💼 In this PDF, you will find practical tips and strategies to effectively manage your working capital, ensuring a healthy and sustainable financial position for your organization. for more information visit now https://www.mbaassignmentexperts.com/management-assignment-help

8 Tips for Effective Working Capital Management

MBA Assignment Experts

AIM of Education-Teachers Training-2024.ppt

Nishitharanjan Rout

Recently uploaded (20)

e-Sealing at EADTU by Kamakshi Rajagopal

Basic Civil Engineering notes on Transportation Engineering & Modes of Transport

PSYPACT- Practicing Over State Lines May 2024.pptx

VAMOS CUIDAR DO NOSSO PLANETA! .

ĐỀ THAM KHẢO KÌ THI TUYỂN SINH VÀO LỚP 10 MÔN TIẾNG ANH FORM 50 CÂU TRẮC NGHI...

Observing-Correct-Grammar-in-Making-Definitions.pptx

Trauma-Informed Leadership - Five Practical Principles

UChicago CMSC 23320 - The Best Commit Messages of 2024

Improved Approval Flow in Odoo 17 Studio App

Andreas Schleicher presents at the launch of What does child empowerment mean...

Spellings Wk 4 and Wk 5 for Grade 4 at CAPS

When Quality Assurance Meets Innovation in Higher Education - Report launch w...

An overview of the various scriptures in Hinduism

SPLICE Working Group:Reusable Code Examples

male presentation...pdf.................

ESSENTIAL of (CS/IT/IS) class 07 (Networks)

Spring gala 2024 photo slideshow - Celebrating School-Community Partnerships

OSCM Unit 2_Operations Processes & Systems

8 Tips for Effective Working Capital Management

AIM of Education-Teachers Training-2024.ppt