Theatre Royal Plymouth. The first Theatre in England To receive the Carbon Trust’s Energy Efficiency Award Kevin Faulkner ...
 
Display Energy Certificates
Still in bragging mode!
And again!
<ul><li>By looking away from the glitz! </li></ul><ul><li>And getting down and dirty! </li></ul>We did it, so can you.
Where do we start? <ul><li>2.2kw kettle run 3 times a day for a total of 10 minutes = only 0.37kwh </li></ul><ul><li>100w ...
3x 15w replaced with 3x 3w (45  ↓ 9) 15w replaced with 3w (1Khrs  ↑ 15K) 35w Halogen replaced with 3w single LED
Use of LEDs, High Frequency, Low energy lighting & Fibre Optic 100w light requires a further 100w to cool = 200w total ele...
Water savings….18hr use <ul><li>Motion sensor  </li></ul><ul><li>Percussion taps </li></ul><ul><li>Hippo </li></ul><ul><li...
2 x 750kw boilers on 24hrs a day plus associated pumps and fans! Simple 10 minute adjustments to BEMS reduced running time...
Heating  &/or  Air conditioning ? <ul><li>Under floor and space heating set to 24 o C </li></ul><ul><li>Overhead air condi...
Room temperature control ! <ul><li>Under floor heating set to 24 o C </li></ul><ul><li>Doors opened by staff to cool area ...
Why use chillers when most vent systems can use fresh air to cool and also body-heat/recirculation to heat? We repaired th...
Air damper or not, this fresh air damper from our studio Theatre was only useful for scrap.  Recycled of course!
BEMS are designed to reach required temperatures as efficiently as possible, Once there, the system should be allowed to v...
Brute Force vs Technology 750KWh atmospheric ‘Flame Thrower’ 50% efficient 2x 50KWh high efficiency Combi 98+% efficient (...
We fitted Zenex boilers for DHWS, by pre-heating the cold water to your calorifier, massive savings can be achieved. Other...
We dared to enter traditional no go areas. but the artistes loved it, and less of a fire risk! Not a priority as hours of ...
2007 compared with 2002 Electricity 19% lower Gas 46% lower Water 33% lower CO2 33% lower Saving annually at today's price...
2007 compared with 2002 Electricity 14% lower Gas 30% lower Water 20% lower Co2 10% lower Saving annually at today's price...
And today’s lesson……… <ul><li>YOU CAN DO IT TOO! </li></ul><ul><li>Lots of easily achievable, cost effective wins </li></u...
Thankyou <ul><li>Paul Renyard Senior Manager </li></ul><ul><li>Bailey Environmental </li></ul><ul><li>TAC Satchwell </li><...
(Please ignore the 2004 glitch!) CO2 reductions in the last five years
History <ul><li>Age of buildings and equipment </li></ul><ul><li>If we need it - turn it up  </li></ul><ul><li>Always done...
Energy & Environmental Management System <ul><li>Why invest time & effort ? </li></ul><ul><ul><li>Provides direction </li>...
Proactive Approach <ul><li>Planned & Preventative maintenance </li></ul><ul><li>Work Requester – rapid repair </li></ul><u...
Use of Technology <ul><li>BAS 2800+ </li></ul><ul><li>BMS Sigma </li></ul><ul><li>Remote access and monitoring </li></ul><...
Upcoming SlideShare
Loading in …5
×

Theatre Royal Plymouth. The first Theatre in England To receive the Carbon Trust’s Energy Efficiency Award: Kevin Faulkener

1,165 views

Published on

Kevin Faulkner (Premises Manager,Theatre Royal Plymouth) delivers a speech on achieving energy efficiency with buildings.

1 Comment
0 Likes
Statistics
Notes
  • Be the first to like this

No Downloads
Views
Total views
1,165
On SlideShare
0
From Embeds
0
Number of Embeds
34
Actions
Shares
0
Downloads
5
Comments
1
Likes
0
Embeds 0
No embeds

No notes for slide
  • Theatre Royal Plymouth. The first Theatre in England To receive the Carbon Trust’s Energy Efficiency Award: Kevin Faulkener

    1. 1. Theatre Royal Plymouth. The first Theatre in England To receive the Carbon Trust’s Energy Efficiency Award Kevin Faulkner Premises Manager Theatre Royal (Plymouth) From a Paul Renyard presentation! Which was borrowed from a Kevin Faulkner premises presentation!
    2. 3. Display Energy Certificates
    3. 4. Still in bragging mode!
    4. 5. And again!
    5. 6. <ul><li>By looking away from the glitz! </li></ul><ul><li>And getting down and dirty! </li></ul>We did it, so can you.
    6. 7. Where do we start? <ul><li>2.2kw kettle run 3 times a day for a total of 10 minutes = only 0.37kwh </li></ul><ul><li>100w light bulb for 24 hrs = a massive 2.4kwh (and you may have hundreds of them) </li></ul><ul><li>THEREFORE….Ignore (for now) large power items/machinery that are on for a short period of time. (And the shows, just 3 hours a day) </li></ul><ul><li>SO THE IMPORTANT PART OF Energy =KW x H …is the H </li></ul><ul><li>Start on your 24 hour lighting. </li></ul><ul><li>Check 18 hour Ventilation plant </li></ul><ul><li>Check HWS </li></ul>Kettle versus the light bulb! Which uses the most power when both switched on? Which uses the most power in a typical working day? Assuming that the kettle is used by our very busy maintenance department (3 times a day!) and that the light bulb is on 24 hours in an emergency escape route in the basement.
    7. 8. 3x 15w replaced with 3x 3w (45 ↓ 9) 15w replaced with 3w (1Khrs ↑ 15K) 35w Halogen replaced with 3w single LED
    8. 9. Use of LEDs, High Frequency, Low energy lighting & Fibre Optic 100w light requires a further 100w to cool = 200w total electricity consumption !!
    9. 10. Water savings….18hr use <ul><li>Motion sensor </li></ul><ul><li>Percussion taps </li></ul><ul><li>Hippo </li></ul><ul><li>Increase in ring main temperature </li></ul><ul><ul><li>Legionnaires </li></ul></ul><ul><ul><li>Hotter quicker – less waste </li></ul></ul><ul><li>Planned Maintenance </li></ul>
    10. 11. 2 x 750kw boilers on 24hrs a day plus associated pumps and fans! Simple 10 minute adjustments to BEMS reduced running time to 8hrs a day on demand only. Further enhancements came later.
    11. 12. Heating &/or Air conditioning ? <ul><li>Under floor and space heating set to 24 o C </li></ul><ul><li>Overhead air conditioning set to 22 o C </li></ul><ul><li>Plant default should be OFF not ON </li></ul>
    12. 13. Room temperature control ! <ul><li>Under floor heating set to 24 o C </li></ul><ul><li>Doors opened by staff to cool area down </li></ul><ul><li>Simple adjustment of set point, solved. </li></ul>
    13. 14. Why use chillers when most vent systems can use fresh air to cool and also body-heat/recirculation to heat? We repaired the air dampers and linked to BEMS. Therefore chillers and boilers remain off most of the time.
    14. 15. Air damper or not, this fresh air damper from our studio Theatre was only useful for scrap. Recycled of course!
    15. 16. BEMS are designed to reach required temperatures as efficiently as possible, Once there, the system should be allowed to vary a little in temperature (known as a dead band), Otherwise the system will hold that ideal temperature whatever the cost! Shown below is a ventilation system feeding basement dressing rooms and offices. So fine tune the controls to provide the best environment at the lowest cost.
    16. 17. Brute Force vs Technology 750KWh atmospheric ‘Flame Thrower’ 50% efficient 2x 50KWh high efficiency Combi 98+% efficient (Zenex Coolflue Technology) 24 hour domestic hot water (showers) We saw earlier that two large boilers were used to heat the DHWS, This is very wasteful in summer! Any domestic boiler system would have been better but we used 2 very efficient Zenex Technology boilers, total cost £20k, Payback1.5 years!
    17. 18. We fitted Zenex boilers for DHWS, by pre-heating the cold water to your calorifier, massive savings can be achieved. Other boilers are available!
    18. 19. We dared to enter traditional no go areas. but the artistes loved it, and less of a fire risk! Not a priority as hours of use is low. 60W incandescent 7W Fluorescent
    19. 20. 2007 compared with 2002 Electricity 19% lower Gas 46% lower Water 33% lower CO2 33% lower Saving annually at today's prices Electricity £20,300 Gas £19,054 Water £10,000 270 Tonnes less of CO2! Current annual utility bill is £122,000 (would have been £172,000)
    20. 21. 2007 compared with 2002 Electricity 14% lower Gas 30% lower Water 20% lower Co2 10% lower Saving annually at today's prices Electricity £43,097 Gas £31,429 Water £12,500 240 Tonnes less CO2! Current utility bill is £394,000 would have been £481,000
    21. 22. And today’s lesson……… <ul><li>YOU CAN DO IT TOO! </li></ul><ul><li>Lots of easily achievable, cost effective wins </li></ul><ul><li>Excellent topical PR </li></ul><ul><li>Feel good factor ! </li></ul>… .public body …providing a public service….setting a fine public example……
    22. 23. Thankyou <ul><li>Paul Renyard Senior Manager </li></ul><ul><li>Bailey Environmental </li></ul><ul><li>TAC Satchwell </li></ul><ul><li>Zenex Technologies </li></ul><ul><li>Pennon Group </li></ul><ul><li>Western Electrical </li></ul><ul><li>My Staff </li></ul><ul><li>And anyone else that knows me! </li></ul>
    23. 24. (Please ignore the 2004 glitch!) CO2 reductions in the last five years
    24. 25. History <ul><li>Age of buildings and equipment </li></ul><ul><li>If we need it - turn it up </li></ul><ul><li>Always done that way ! </li></ul><ul><li>Reactive repair </li></ul><ul><li>Lack of investment </li></ul><ul><li>Awareness </li></ul><ul><li>Who cares…. Not my money….. Or is it ? </li></ul>
    25. 26. Energy & Environmental Management System <ul><li>Why invest time & effort ? </li></ul><ul><ul><li>Provides direction </li></ul></ul><ul><ul><li>Documentary evidence of progress and intent </li></ul></ul>
    26. 27. Proactive Approach <ul><li>Planned & Preventative maintenance </li></ul><ul><li>Work Requester – rapid repair </li></ul><ul><li>Dilapidations survey and forward planning </li></ul><ul><li>Performance Monitoring </li></ul><ul><li>Replacement & Procurement Policies </li></ul><ul><ul><li>Energy efficient direct drive motors </li></ul></ul><ul><ul><li>Efficient or more effective lighting </li></ul></ul><ul><ul><li>Green refrigerant gas, chemicals etc etc…. </li></ul></ul>
    27. 28. Use of Technology <ul><li>BAS 2800+ </li></ul><ul><li>BMS Sigma </li></ul><ul><li>Remote access and monitoring </li></ul><ul><li>Zoning </li></ul><ul><li>Lux sensors </li></ul><ul><li>Motion sensors </li></ul>

    ×