1. Curriculum Vitae for Zakarya Mohamed Talaat Nassar
Position: Senior Drilling, Completion & Work-overSupervisor.
Date & Place of Birth: 10th march 1985, Kingdom of Saudi Arabia
Nationality & Residence: Egyptian, Egypt
Home Airport: Cairo – Egypt
Marital Status: Married
Education: B.Sc. Degree of Petroleum Engineering, MAY 2007
University: Cairo University (C.U.)
Cumulative Grade: Very Good With Honor Degree
Expertise: Drilling & Work Over Supervisor
Years' experience: 10 years.
Mobile No.: +201007656777 & +201274760461
E-mail Add.: Zakrya.mohamed@khalda-eg.com &
Zikus_008@yahoo.com
Summary:
• Supervise all drilling operations on drilling rigs for both shallow & deep wells.
• Work on Drilling HPHT oil & gas wells.
• Work on Deviated & horizontal wells with Steerable & RSS.
• Make Analysis for Drilling Problems and recommend the proper most economic technical solutions
after discussion.
• Had a lot of Exp. In Completion, Well testing & Simulation For gas, oil & water Wells
• Supervise all Workover for old gas, oil & water Wells.
• A successful career with APACHE Corporation/ EGPC joint venture (Khalda Petroleum Company)
• Had previous experience working on H2S wells
• I have worked as a Drilling, Completion & Work over consultant for many of international operators in
Egypt such as Nafto-Gas of Ukraine, Vegas oil, Petroamir, and Norpetco.....etc
• I am willing to relocate internationally at any time. I have had a lot of experience working with Drilling
branches.
Previous Posts:
From To Company Job Title
March 2008 Present Khalda petroleum
corporation “Apache Egypt”
Drilling, Completion & Work over
Supervisor Engineer
❖ Participated in operations activities related to Drilling, Work-over and Well completion carried out
by contractors or service companies on assigned rig.
• Drilling Rigs:
1. Supervise all operations on drilling rigs for both shallow & deep wells, exploratory gas & oil
wells and Development gas & oil wells.
2. Running & cementing operations for different casing & liners.
3. Supervise Direction & horizontal wells (motors, RSS systems, MWD tools, LWD/MWD tools)
4. Deals with Drilling Problems Such As Salt Water Flow, Losses in Depleted Zones, Stuck Pipes,
Salt Movement, Casing Problem and Water base & oil base drilling fluid problem & others.
5. Supervise side track (open hole & cased hole) & re-entry wells.

2. 6. Supervise Open hole Logging.
7. Running all types of bits (tri cone, PDC, impregnated bits).
8. Well control during normal operation & during kick.
9. Supervised BOP test & accumulator test.
10. Have good experience in drilling with water base mud & oil base mud systems.
11. Supervised a lot of fishing operations.
12. Follow-up supply activities of company materials & equipments to deliver well plans.
• Completion &Work over Rigs:
1. Run gas, oil & water well completions.
2. Initial completion using TCP (Shot & Pull – Shot & Drop – Shot & Stay) & Casing gun perforation
3. Supervise Fishing & string shoot jobs.
4. Supervise Tubing & pump replacement (ESP & SRP).
5. Performed Drill Stem Test ‘DST’ for gas wells,
6. Complete the Well As (Single Water Injection String & Single Selective Water Injection String
Using Straddle PKR.).
7. Performed Acidizing & stimulation job.
8. Recorded cased hole Log
9. Perforation Job ( Over Balance – Under Balance With N2 – Under Balance With Disk ),
(Mechanical & Hydraulic Firing)
10. Performed Hydraulic Fracturing for Perforated Interval.
11. Test The Well (Lift & Test).
12.Complete The Well With ESP, Sucker Rod Pump & Water Injection String
13.Performed Balanced Cement Plug & CMT Squeeze Job.
14.Isolate opened reservoir interval using tie-pack liner
❖ Ensure that the daily operations on the rig are reported accurately; confirming costs and discuss
completed operations with Superintendent.
❖ Engage and encourage drilling contractor and third party service companies to offer suggestions for
increasing operational performance.
❖ Ensures continuous improvement and ideas from rig after action reviews and lessons learned are
incorporated into daily work instructions and implemented in all well operations.
❖ Provide Plans for future operations and ensures required materials and services are available at rig
site in an efficient time frame.
❖ Provide written work instructions to all crews involved in operations with emphasis on key risks
identified and with measures to avoid NPT.
❖ Responsible for managing operations in the most cost-effective manner and cost control of all
activities in my area of responsibility.
❖ Ensure that all operations on the rig site and camp area are carried out according to Company’s
Safety, Environment and Loss prevention policies, rules and regulations.
❖ Responsible for HSE procedures being continuously enforced, and for making capable decisions in
emergency situations.
❖ Ensure that safety regulations and practices are respected by all personnel on rig site including
drilling contractor and Service Company employees.
❖ Regularly inspects rig and third-party equipment for adequate maintenance. Maintains inventory of
all equipment / materials / supplies.
❖ Ensure that safety drills/tests are conducted on rig site as per company plan and procedures.
Investigates accidents/incidents and follows-up action plan.
From To Company Job Title
June 2009 Jan. 2010 Petrobel corporation “Eni/Agib Egypt” Drilling Supervisor Engineer

3. ❖ IN SINAI & GOLF OF SUZE Field under authorities of The Egyptian General Petroleum Corporation,
(EGPC) For six months, with the following responsibilities;
• Drilling Engineer, Prepare Daily Drilling Reports, Prepare Casing & Cementing Programs & Make
Analysis for Drilling Problems and recommend the proper most economic technical solutions after
discussion, Attend Pre-spud Meetings For New Wells, Follow Up Drilling Operations As Per
Program, Monitor Drilling Cost.
• Drilling Rig Supervisor, in Land Rigs, Follow up The operations of BaleymLand, Deviated with
Steerable & RSS And Vertical wells, Running Casing & Liner, Cementing & Remedial Jobs, Deal with
Drilling Problems Such As Salt Water Flow, Losses In Depleted Zones, Stuck Pipes, Salt Movement,
Casing Problem, Receiving & Writing Daily Drilling Reports.
Education:
❖ B.SC. of petroleumengineer, Faculty of engineering withcumulative grade Very
Good WithHonor Degree
From To Institution
3rd October 2002 1st May 2007 Cairo university
Technical Courses & Certificates:
Name Issued Completion Date
(MM-YYYY)
International Well Control Forum,
IWCF
Oil & Gas Skills Training Center, OGS. FEB. 2016
IADC WELL CAP & H2S COURSE MISR TRAINING CENTER March 2016
IADC WELL PROBLEM, STUCK PIPE &
FISHING
Oil & Gas Skills Training Center, OGS. APRIL 2016
HEALTH, SAFETY & ENVIRONMENT
COURSE ( HSE )
MAERSK / EDC TRAINING CENTRE MARCH 2014
Drilling & Logging High-Angle WELL
COURSE
APACHE CORPORATION MARCH 2015
Drilling Fluid Technology
Halliburton University, Baroid
Training Center
MAY 2015
Stuck Pipe Prevention MAERSK/ EDC TRAINING CENTRE FEB 2015
Horizontal & Direction Drilling Oil & Gas Skills Training Center, OGS. JAN 2015
Drill Bits & Advanced Technology Smith Bits, A Schlumberger Company APRIL 2015
Drilling Fluid & mud system Oil & Gas Skills Training Center, OGS. MARCH 2014
Fundamentals of Drilling Engineering Oil & Gas Skills Training Center, OGS. June 2011
Well Completion & Stimulation Oil & Gas Skills Training Center, OGS. JULY 2011
Rock, Fluid Properties & PVT Oil & Gas Skills Training Center, OGS. OCTOBER 2011
Geological Fundamental Oil & Gas Skills Training Center, OGS. NOV. 2011

4. Languages:
Language Level
English Fluent
Arabic Native
Others:
❖ Computer Skills
• Excellent in deals W/Windows-98, XP, Vista & windows 7
• Excellent Microsoft Word, PowerPoint & Excel (Microsoft Certificated).
• Very Good in Internet.
❖ Soft Skills Courses.
• System Orientation to Personal Development (Soft Skills). In Society of Petroleum Engineering
(SPE) Centre in Cairo (SPE Certificated).
• How to Improve my Lifestyle Through Developing & Expanding my Knowledge Base & Skills in sky
hopes training company
❖ Soft skills.
• Sociable, Able to deal with different characters (studied a specialized course in Psychology of
People),
• Self-Motivated Person (I know how to setup my goals to reach my dreams & how to inspire and
influence others toward a common goal),
• Good Systematical Thinking Orientation,
• Know how to manage my time,
• Problem Solving & Decision making Skills,
• Very good team Building (An effective team member or even build my own team to attain
uncommon results),
• Excellent Communication Skills (Learned how to speak, listen & respond in my business, family &
social Life),
• Very Good Presentation Skills,
• Very Good Negotiation Skills,
• I learn How to be a good Economical Engineering,
• I take a course in Waste Management Strategies & Learn how to Protect The Environment, I
learned the First Aid to help the others.