Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptx
PLC and SCADA
1. “Programmable Logic Controller & Supervisory
Control And Data Acquisition”
Guided by-
Er. Kuldeep Soni
Sofcon Ind. Pvt. Ltd. Bhopal
Presented by:
Vinay Vishwakarma
B. Tech 7th semester
Department of Electrical Engineering
AKS UNIVERSITY,
SATNA
1
2. 1. A PLC is a digitally operating System.
2. It is designed for the use in an industrial environment .
3. It control digital or analog inputs and outputs in the various
types of machines or process.
4. Its work on Ladder Diagram Method.
2
3. Developed to replace relays in the late
1968s.
Costs dropped and became popular by
1980s.
Now used in many industrial designs.
Leading Brand
Allen Bradley, General Electric, Siemens,
Toshiba, GE Fanuc, Omron etc.
4. Less Wiring .
Wiring between devices and relay
contacts are done in the PLC program.
Easier and Faster to make change.
Trouble shooting aids make
programming easier and reduce
downtime.
4
7. Power supply – provides the voltage
needed to run the primary PLC
components.
I/O Modules – provides signal conversion
and isolation between the internal logic-
level signals inside the PLC and the field’s
high level signal.
7
8. Processor – provides intelligence to
command and govern the activities of the
entire PLC system.
Programming devices – used to entire the
desired program that will determine the
sequence of operation and control of
process equipment or driven machine.
8
13. Q. Auto and manual mode operation of a machine and its indication by
lightning the output light Q1 and Q2.
13
14. Supervisory Control And Data Acquisition
(SCADA)
• A SCADA system is a common industrial process automation
system which is used to collect data from instruments and
sensors located at remote sides and to transmit data at a
central site for either monitoring or controlling purpose.
• The collected data from sensor and instruments is usually
viewed on one or more SCADA host computer that are
located at the central site.
14