1. A PRESENTATION
on
MOVING VEHICLE FOR PERSONS
WITHOUT HANDS
BY:-
VANCHHIT RAWAT ( 1516240136 )
VAIBHAV DUBEY ( 1516240133 )
SURAJ KASHYAP ( 1616240907 )
SHRAVAN Kr. YADAV (1516240110 )
SUBHAM OJHA ( 1516240117 )
SUMIT YADAV ( 1516240128 )
MECHANICAL BRANCH
4th YEAR ( ME-2 )
FACULTY GUIDE :-
MR.ASHISH KUMAR SRIVASTAVA
(Associate Professor)
1
2. CONTENTS
PROJECT IDEA
INTRODUCTION
DESIGN AND DRAWING
ESSENTIAL PARTS
BUDGETS PER UNIT PIECES
ADVANTAGES AND APPLICATIONS
FINAL PROJECT
2
3. PROJECT IDEA
The idea had come in our mind when I saw a person who lost
their both hand in an accidents.
Then the idea had come in our mind that if my team works on
that project who helps such type of problems, which don’t
need a person’s support.
3
5. INTRODUCTION
Since there are so many methods of operating or controlled the
vehicle for example brain operated, hand operated, joystick,
chin control, etc.
This project’s principle based on MECHANICAL
OPERATION by the leg.
5
6. DESIGN AND DRAWING
All dimensions
are in cm.
Chain length is
33 cm.
Chair sheet is
14 X 13 cm x cm
Fig:- 1 SIDE VIEW OF VEHICLE
7. Material used: Mild steel
Wheel material: Plastic tubeless
tyre
Welding Process: Arc welding
Wheel Dimension:
Outer Diameter = 12
Inner Diameter = 10
Fig:- 2 SIDE VIEW OF VEHICLE
8. ESSENTIAL PARTS
The essential parts of vehicle consist of-
1) Rod of mild steel
2) Tubeless tyre wheel
3) Brakes
4) Chain
5) Break wire and pedal
6) Sheet metal
7) Tilt bar and essential parts.
8
9. BUDGETS
The budgets of this project approximately Rs.4,500 per unit
pieces.
The budget of this project much lesser than type of other
vehicle for handicapped by hand persons.
9
10. ADVANTAGES AND APPLICATIONS
If a handicapped by hand person want to go 5 to 10 km in
villages and he has luggage (3-4 kg) then he can easily go their
without any supports.
Basically this project very beneficial for the village’s
handicapped person where don’t have Auto-riksha and other
transportation.
10