1. Timothy “Logan” Ray McHargue
429 Chestnut St, Apt. 15, Harrodsburg, KY 40330
(336)927-5070. timothymchargue@gmail.com
SUMMARY OF QUALIFACTIONS
• Level 2 Mechanical Technician: Trusted to be the solitary one responsible for
mechanical systems and power house during night shift and weekends.
• Nuclear Machinist Mate (Submarines): Over 9 years experience recording
equipment parameters; lines up, starts, adjusts, and secures fresh water and sea
water systems.
• Lines up, starts, adjusts, maintains, and secures HVAC system.
• Lines up, starts, adjusts, maintains, and secures air systems and auxiliary drain
systems
• Receives, handles, stores and disposes of hazardous waste and hazardous
materials.
• Fabricates gaskets (valves, pumps, pipes), inspects and replaces seals, gaskets,
and O-rings; installs blank flange on piping.
• Replaces, cleans and lubricates valve components; inspects, adjusts, and tests
valves.
• Performs hydrostatic tests; replaces and cleans system filters and strainers.
• Troubleshoots, repairs and overhauls valves, flexible couplings.
• Verifies greasing plan, and submits appropriate quality assurance forms.
• Maintains weight, test, and calibration logs, maintains equipment operation logs.
• Draws diagrams and sketches; verifies accuracy of ship's drawings and diagrams.
• Utilize drawings (blueprints and schematics), uses, cleans, and inspects general
purpose electronic test equipment (GPETE).
AREAS OF EXPERTISE
• Mechanical Systems
• Engineering
• Troubleshooting
• Maintenance and Repair
• R-114 York 200 Ton HVAC Technician
• Records Management
• Quality Assurance
• Air Compressors
WORK EXPERIENCE
SCA Hygiene, Harrodsburg, KY 2014-Present
Mechanical Technician Level 2

2. • On shift technician is responsible for maintaining the mechanical systems and
power house while on shift.
• In charge of mechanical systems during non-working hours and weekends.
IMF Bangor, WA, 2012-2013
Quality Assurance Inspector/NACE Level 1
• On-Site inspector for Subsafe/Level 1 work controls
• Reviewed and approved Subsafe/Level 1 work packages
• On-Site Inspector for Critically Coated Paint Surfaces
Kings Bay, GA, (SSGN 729, USS Georgia (B)) 2009-2012
Machinist Mate, QAI
Pearl Harbor, HI, (SSN 752, USS Pasadena) 2006-2009
Machinist Mate, QAI
Charleston, SC, (NNPTC) 2004-2006
Machinist Mate (Classroom and OJT for operating and maintaining ships equipment)
As a Machinist Mate, I:
• Trained and supervised up to 130 personnel on operations, maintenance, and
repair of propulsion machinery, auxiliary equipment, and outside machinery, such
as: hoisting machinery, food preparation equipment, refrigeration and air
conditioning equipment, and laundry equipment.
• Prepared annual, quarterly, monthly, and weekly schedules and reviewed weekly
preventive maintenance and environmental pollution control reports along with
other necessary maintenance documentation.
• Studied and reviewed procedures involving plant operations, air conditioning and
refrigeration assembly, installation, troubleshooting and repair.
• Identified factors governing main propulsion plant efficiency, causes of poor
performance, and appropriate solutions.
• Served as maintenance lead responsible for assigning on site maintenance tasking,
completing maintenance reports, inventorying installed equipment, and ordering
repair parts from various suppliers using a Material Resource Planning (MRP)
system.
• Managed, trained, and supervised personnel on proper operations of steam and
power plants that provided propulsion, electrical power, potable water, and service
steam throughout the ship.
• Trained and supervised up to 130 personnel on proper operations and maintenance
marine boilers, pumps, forced draft blowers, and heat exchangers.
• Operated air compressors, air conditioning systems, air dryer systems, auxiliary
exhaust and steam systems, bilge and stripping pumps, blow down systems, chill
water systems, jacking gears, drain and feed systems, oil service pumps,
refrigeration systems, and transfer systems for receiving fuels.
EDUCATION

3. Military technical schools:
• 2012 US Navy/IMF Quality Assurance Inspector
• 2012 SSPC NAVSEA Basic Paint Inspector
• 2011 US Navy Machine Tool Operator
• 2011 US Navy R-114 Technician
• 2006 US Navy Emergency Nuclear Repair Welder
• 2004 US Navy Mechanical Engineering A School Charleston, SC
• 2004 US Navy Engineering Common Core Training Charleston, SC