1. CURRICULUM VITAE Samdoo JUNG
1
Mobile : +82‐10‐2300‐5895
Email : light3242@gmail.com
Nationality Korean
Residence Korea
Marital Status Married
Birthday Sep‐24‐1974
Essential Talents
 14 years of experience in the engineering and the construction industry of
the power plant
 Hugely experienced Process and Mechanical Engineer
 Experienced on the large scale of power plants up to 1,800 MW
 Experienced on the full turnkey projects
 Experienced with the overseas developers as well as the domestic developers
 Experienced as a lead engineer for covering performance design, process
engineering, mechanical engineering, control engineering, construction
supporting and commissioning assistance.
 Experienced as a performance decision maker with a variety of the
performance insights and the capabilities of handling the powerful simulation
tools.
Education
Bachelor of Science in Mechanical Engineering, Feb. 2000
Kyunghee University, Seoul, Korea
Master of Science in Mechanical Engineering, Feb. 2002
Kyunghee University, Seoul, Korea
Job Summary
I am hugely experienced in the engineering and the construction industry with a
career covering a wide range of the power plant engineering such as
performance design, process engineering, mechanical engineering and control
engineering including the construction and the commissioning support at site.
Major projects of note include :
 Pocheon LNG Combined Cycle Power Plant
 Location : Korea
 Capacity : 1,800 MW
 GTG : MHPS 501GAC

2. CURRICULUM VITAE Samdoo JUNG
2
 Configuration : 2 on 1 x 2 blocks
 Position : Lead Engineer
 Gwangyo Combined Heat and Power Plant
 Location : Korea
 Capacity : 175 MW + 360 Mcal/hr
 GTG : Siemens SGT6‐3000E
 Configuration : 1 on 1 + District Heater
 Position : Lead Engineer
 Songdo Combined Heat and Power Plant
 Location : Korea
 Capacity : 205 MW + 170 Mcal/hr
 GTG : GE 6FA
 Configuration : 2 on 1 + District Heater
 Position : Sub‐Lead Engineer
 Kwangyang LNG Combined Cycle Power Plant
 Location : Korea
 Capacity : 1,000 MW
 GTG : GE 7FA
 Configuration : 2 on 1 x 2 blocks
 Position : Process and Mechanical Engineer
 Boryeong Thermal Power Plant Unit 7 and 8
 Location : Korea
 Capacity : 1,000 MW
 STG & Boiler : Doosan Heavy Industry
 Configuration : 500 MW x 2 blocks
 Position : Process and Mechanical Engineer
 Jeju TPP Diesel Generator Facility
 Location : Korea
 Capacity : 40 MW
 Configuration : Diesel Generator 1 block
 Position : Process and Mechanical Engineer
 BASF Combined Cycle Power Plant
 Location : China
 Capacity : 175 MW
 STG & Boiler : GE 6B
 Configuration : 3 on 1 x 1 block
 Position : Process and Mechanical Engineer

3. CURRICULUM VITAE Samdoo JUNG
3
Job Experience  Company: Daelim Industrial Company
Duration: May, 2002 to present as Senior Manager.
Job Function: Process and Mechanical Engineering
Responsibilities:
 Feasibility Studies for the early set‐ups of the overall power plant before
the Owner starts working on the project.
 Performance Engineering and Guarantee Control of the power plant based
on the contracts or RFPs
 Process Engineering Works
 Heat and Mass Balance Diagrams
 Water Balance Diagrams
 Process Flow Diagrams
 Piping and Instrument Diagrams
 Plant Control Philosophy
 Plant Protection Philosophy
 Performance Test Procedure
 Design Criteria
 System Descriptions
 Function Descriptions
 Plant Start‐up and Shutdown Procedures
 Plant Start‐up Curves
 Commissioning Procedures
 Steam Blowout Procedures
 Chemical Clean Procedures
 Piping Design Conditions
 Valve and Instrument Process Data
 Mechanical Equipment Sizing and Calculations
 Process Sizing and Calculation
 Performance and Design Data for the equipment purchase
 Gas Detector Process Data
 Performing and analyzing of the performance test at site to meet the
performance guarantee
 Dynamic and Transient Analysis
 Mechanical Engineering Works
 Preparing of Technical Specifications for the equipment purchase
 Preparing of Request for Quotation
 Performing of Technical Bid Evaluations for the vendor selection

4. CURRICULUM VITAE Samdoo JUNG
4
 Performing of Technical Clarification with the manufacturers
 Preparing of Engineering drawing of the field fabricated tanks
 Preparing of Purchase Requisition for the contract with the
manufacturers
 Review and approval of Vendor Print Drawing and Document
 Preparing of Equipment List for the construction works
 Preparing of Auxiliary Power List for the electric engineering
 Preparing of Lubricant List for the procurement and construction works
 Preparing of Painting List for the procurement and construction works
 Preparing of insulation List for the procurement and construction works
 Preparing of Spare part list for the procurement and construction works
 Preparing of Chemical consumption list for the procurement and
construction works
 Review of engineering schedules, monitoring, coordinating, drawing
and document in line with the target dates.
 Preparing of Operation and Maintenance Manual
 Preparing of the utility consumptions during the commissioning stage
such as raw water, fuel, the electricity for the Owner’s cost estimation
 Control Engineering
 Review and coordination of the control logic and loop diagrams for the
automatic plant regulation (APR)
 Review and coordination of the control sequential diagrams for the
automatic plant start‐up and shut‐down (APS)
 Review and coordination of the power output control logics (MW
Control)
 Construction and Commissioning Supports
 Assisting the construction work by controlling and supervising the
delivery, schedule and quality of the mechanical equipment including
any technical issues from the manufacturers at site
 Coordination with site execution team to resolve design & engineering
issues during erection & commissioning at site
 Review and Coordination with Technical Field Assistants (TFA) from the
manufacturers at site
Project Experience:
 Pocheon LNG Combined Cycle Power Plant
 Location : Korea
 Period : OCT‐2011 ~ NOV‐2014
 Owner : Pocheon Power
 Capacity : 1,800 MW

5. CURRICULUM VITAE Samdoo JUNG
5
 Main Characteristics
‐ Type : Combined Cycle Power Plant
‐ GTG : MHPS 501GAC, 265 MW
‐ STG : Doosan Heavy Industry, 260 MW
‐ HRSG : BHI, Subcritical
‐ Cooling Method : Cooling Tower
‐ Configuration : 2 on 1 x 2 blocks
 Roles :
Planning and supervising the process and mechanical engineering as a
lead engineer
‐ Performance engineering
‐ Process engineering
‐ Mechanical engineering
‐ Construction support
‐ Commissioning support
‐ Warranty support
 Gwangyo Combined Heat and Power Plant
 Location : Korea
 Period : DEC‐2009 ~ OCT‐2013
 Owner : KDHC (Korea District Heating Corporation)
 Capacity : 225 MW + 170 Mcal/hr
 Main Characteristics
‐ Type : Combined Cycle Power Plant + District Heating
‐ GTG : Siemens SGT6‐3000E, 120 MW
‐ STG : Siemens, 55 MW
‐ HRSG : Sedae Enertech, Subcritical
‐ Cooling Method : District Heater
‐ Configuration : 1 on 1 + District Heater
 Roles :
Planning and supervising the process and mechanical engineering as a
lead engineer
‐ Performance engineering
‐ Process engineering
‐ Mechanical engineering
‐ Control Engineering
‐ Construction support
‐ Commissioning support
‐ Warranty support
 Songdo Combined Heat and Power Plant
 Location : Korea
 Period : MAR‐2007 ~ NOV‐2009

6. CURRICULUM VITAE Samdoo JUNG
6
 Owner : INTECO (Incheon Total Energy Company)
 Capacity : 205 MW + 170 Mcal/hr
 Main Characteristics
‐ Type : Combined Cycle + District Heating
‐ GTG : GE 6FA, 75 MW
‐ STG : MHI, 55 MW
‐ HRSG : Sedae Enertech, Subcritical
‐ Cooling Method : District Heater and Air Cooled Condenser
‐ Configuration : 2 on 1 + District Heater
 Roles :
The process and mechanical engineering as a sub‐lead engineer
‐ Assisting the lead engineer
‐ Performance Engineering with the heat and mass balance
diagrams
‐ Coordinating and integrating of the processing, mechanical,
control engineering internally
‐ In charge of the system and the equipment
 Main Steam System
 Main Condensate System
 DH Condensate System
 District Heating System
 District Heating Economizer System
 Circulating Water System
 Closed Cooling Water System
 Waste Water Transfer System
 Heat Recovery Steam Generator
 Steam Turbine Generator
 Air Cooled Condensers
 DH Condensate Pump
 Main Condensate Pump
 Closed Cooling Water Pump
 Closed Cooling Water Cooler
 District Heaters
 DH Water Pumps
 Sump Pumps
 Boryeong Thermal Power Plant Unit 7 and 8
 Location : Korea
 Period : MAR‐2004 ~ DEC‐2008
 Owner : Korea Midland Power Corporation
 Capacity : 1,000 MW
 Main Characteristics
‐ Type : Coal Fired Thermal Power Plant

7. CURRICULUM VITAE Samdoo JUNG
7
‐ Boiler : Doosan Heavy Industry, Supercritical
‐ STG : Doosan Heavy Industry, 500 MW
‐ Cooling Method : Sea Water Cooled Surface Condenser
‐ Configuration : 500 MW x 2 blocks
 Roles :
The process and mechanical engineer
‐ In charge of the system and the equipment
 Circulating Water System
 Sea Water Intake System
 Instrument and Service Air System
 Waste Water Transfer System
 Closed Cooling Water System
 Circulating Water Pumps
 Air Compressors
 General Service Pumps
 Cranes & Hoists
 Sump Pumps
 Kwangyang LNG Combined Cycle Power Plant
 Location : Korea
 Period : OCT‐2003 ~ JUN‐2006
 Owner : K‐Power
 Capacity : 1,000 MW
 Main Characteristics
‐ Type : Combined Cycle Power Plant
‐ GTG : GE 7FA, 175 MW
‐ STG : Hitachi, 200 MW
‐ HRSG : Nooter Ericson, Subcritical
‐ Cooling Method : Sea Water Cooled Surface Condenser
‐ Configuration : 2 on 1 x 2 blocks
 Roles :
The process and mechanical engineering as a process and system
engineer
‐ In charge of the system and the equipment
 Closed Cooling Water System
 Waste Water Transfer System
 Heat Recovery Steam Generators
 Shop Fabricated Tanks
 Field Fabricated Tanks
 General Service Pumps
 Closed Cooling Water Heat Exchangers
 Sump Pumps
 Performing of the performance test at site

8. CURRICULUM VITAE Samdoo JUNG
8
 Assisting of the turnover procedures at site
 Jeju TPP Diesel Generator Facility
 Location : Korea
 Period : APR‐2004 ~ JUL‐2005
 Owner : Korea Midland Power Corporation
 Capacity : 40 MW
 Main Characteristics
‐ Type : Diesel Generated Power Plant
‐ Cooling Method : Sea Water Cooled Surface Condenser
‐ Configuration : 40 MW x 1 block
 Roles :
The process and mechanical engineer
‐ In charge of the system and the equipment
 Sea Water Cooling Water System
 Sea Water Intake System
 Waste Water Transfer System
 Sea Water Cooling Water Pumps
 General Service Pumps
 Sump Pumps
 Cranes and hosts
 BASF Combined Cycle Power Plant
 Location : China
 Period : May‐2002 ~ AUG‐2004
 Owner : BASF‐YPC Company
 Capacity : 50 MW
 Main Characteristics
‐ Type : Combined Cycle + Process Steam
‐ GTG : GE 6B, 40 MW
‐ STG : Alstom, 55 MW
‐ HRSG : Daekyug Mechanical & Engineering
‐ Cooling Method : Cooling Tower
‐ Configuration : 3 on 1 x 1 block
 Roles :
The process and mechanical engineer
‐ In charge of the system and the equipment
 Performance Test Procedure
 Plant Correction Curves
 Plant Start‐up and Stop Procedure
Proposal Experience :

9. CURRICULUM VITAE Samdoo JUNG
9
 Pospower Thermal Power Plant
 Location : Korea
 Period : JAN‐2016 ~ Present
 Owner: Pospower (Posco)
 Capacity : 2,100 MW
 Main Characteristics
‐ Type : Coal Fired Thermal Power Plant
‐ Boiler : Doosan Heavy Industry, Ultra‐Supercritical
‐ STG : Doosan Heavy Industry, 1,050 MW
‐ Cooling Method : Sea Water Cooled Surface Condenser
‐ Configuration : 1,050 MW x 2 blocks
 Roles :
Planning and supervising the process and mechanical engineering as a
lead engineer
‐ Performance engineering
‐ Process engineering
‐ Mechanical engineering
‐ Control Engineering
 Sumsel 10 Thermal Power Plant
 Location : Indonesia
 Period : JUN‐2013 ~ Present
 Owner/ Developer : PLN / Mitsui + KEPCO
 Capacity : 720 MW
 Main Characteristics
‐ Type : Coal Fired Thermal Power Plant
‐ Boiler : MHPS, Ultra‐Supercritical
‐ STG : MHPS 720 MW
‐ Cooling Method : Cooling Tower
‐ Configuration : 720 MW x 1 block
 Roles :
Planning and supervising the process and mechanical engineering as a
lead engineer
‐ Performance engineering
‐ Process engineering
‐ Mechanical engineering
‐ Control Engineering
 Topolobampo II Combined Cycle Power Plant
 Location : Mexico
 Period : AUG‐2014 ~ DEC‐2015
 Owner / Developer : CFE / KEPCO
 Capacity : 920 MW

10. CURRICULUM VITAE Samdoo JUNG
10
 Main Characteristics
‐ Type : Combined Cycle
‐ GTG : MHPS 501J, 325 MW
‐ Configuration : 2 on 1 x 1 block
‐ Cooling Method : Air Cooled Condenser
 Roles :
Planning and supervising the process and mechanical engineering as a
lead engineer
‐ Performance engineering
‐ Process engineering
‐ Mechanical engineering
‐ Control Engineering
 Topolobampo III Combined Cycle Power Plant
 Location : Mexico
 Period : DEC‐2014 ~ DEC‐2015
 Owner / Developer : CFE / KEPCO
 Capacity : 785 MW
 Main Characteristics
‐ Type : Combined Cycle
‐ GTG : Siemens 8000H, 295 MW
‐ Configuration : 2 on 1 x 1 block
‐ Cooling Method : Air Cooled Condenser
 Roles :
Planning and supervising the process and mechanical engineering as a
lead engineer
‐ Performance engineering
‐ Process engineering
‐ Mechanical engineering
‐ Control Engineering
 Oman Salalah 2 IPP
 Location : Oman
 Period : MAY‐2014 ~ DEC‐2014
 Owner / Developer : OPWP / EDF
 Capacity : 425 MW
 Main Characteristics
‐ Type : Combined Cycle
‐ GTG : Ansaldo AE64.3A, 65 MW
‐ Configuration : 2 on 1 x 2 blocks
‐ Cooling Method : Sea Water Cooled Surface Condenser
 Roles :
Planning and supervising the process and mechanical engineering as a

11. CURRICULUM VITAE Samdoo JUNG
11
lead engineer
‐ Performance engineering
‐ Process engineering
‐ Mechanical engineering
‐ Control Engineering
 Rabigh V & VII Conversion Project
 Location : KSA (Kingdom of Saudi Arabia)
 Period : JAN‐2013 ~ APR‐2014
 Owner: SEC (Saudi Electricity Company)
 Capacity : 1,100 MW
 Main Characteristics
‐ Type : Conversion from Simple to Combined Cycle
‐ GTG : GE 7EA (Existing Facility)
‐ STG : 280 MW x 4 sets
‐ Configuration : 7 on 1 x 4 blocks
‐ Cooling Method : Sea Water Cooled Surface Condenser
 Roles :
Planning and supervising the process and mechanical engineering as a
lead engineer
‐ Performance engineering
‐ Process engineering
‐ Mechanical engineering
‐ Control Engineering
 Aramco Cogeneration IPP Project
 Location : KSA (Kingdom of Saudi Arabia)
 Period : AUG‐2012 ~ MAR‐2013
 Owner/ Developer: Saudi Aramco / SEMCORP
 Capacity : 400 MW + 180 MW + 400 MW
 Main Characteristics
‐ Type : Cogeneration without STG, 3 different sites
‐ GTG : GE 7F5 (213 MW) and GE 7EA (90 MW)
‐ Configuration : 2 on 1 x 3 different sites
‐ Cooling Method : Not Applicable
 Roles :
Planning and supervising the process and mechanical engineering as a
lead engineer
‐ Performance engineering
‐ Process engineering
‐ Mechanical engineering
‐ Control Engineering

12. CURRICULUM VITAE Samdoo JUNG
12
 Jangmoon Combined Cycle Power Plant
 Location : Korea
 Period : SEP‐2013 ~ DEC‐2013
 Owner: SK ENS
 Capacity : 1,800 MW
 Main Characteristics
‐ Type : Combined Cycle Power Plant
‐ GTG : Siemens SGT6‐8000H
‐ Configuration : 2 on 1 x 2 blocks
‐ Cooling Method : Cooling Tower
 Roles :
Planning and supervising the process and mechanical engineering as a
lead engineer
‐ Performance engineering
‐ Process engineering
‐ Mechanical engineering
‐ Control Engineering
 Riyadh PP12 Combined Cycle Power Plant
 Location : KSA (Kingdom of Saudi Arabia)
 Period : MAR‐2011 ~ APR‐2012
 Owner: SEC (Saudi Electricity Company)
 Capacity : 2,000 MW
 Main Characteristics
‐ Type : Combined Cycle Power Plant
‐ GTG : GE 7F5, 170 MW
‐ Configuration : 4 on 1 x 2 blocks
‐ Cooling Method : Air Cooled Condenser
 Roles :
Planning and supervising the process and mechanical engineering as a
lead engineer
‐ Performance engineering
‐ Process engineering
‐ Mechanical engineering
‐ Control Engineering
 Riyadh PP11 IPP Combined Cycle Power Plant
 Location : KSA (Kingdom of Saudi Arabia)
 Period : JUL‐2009 ~ FEB‐2010
 Owner / Developer: SEC (Saudi Electricity Company) / ACWA
 Capacity : 2,250 MW
 Main Characteristics
‐ Type : Combined Cycle Power Plant
‐ GTG : MHI 501G, 260 MW

13. CURRICULUM VITAE Samdoo JUNG
13
‐ Configuration : 2 on 1 x 3 blocks
‐ Cooling Method : Air Cooled Condenser
 Roles :
The process and mechanical engineering as a sub‐lead engineer
‐ Assisting the lead engineer
‐ Performance Engineering with the heat and mass balance
diagrams
‐ Coordinating and integrating of the processing, mechanical,
control engineering internally
‐ In charge of the system and the equipment
 Performance Guarantee
 Heat and Mass Diagram
 Main Steam System
 Condensate System
 Heat Recovery Steam Generators
 Air Cooled Condensers
 Vacuum Pumps
 Condensate Pumps
 Gwangyo Combined Heat and Power Plant
 Location : Korea
 Period : MAY‐2009 ~ NOV‐2009
 Owner : KDHC (Korea District Heating Corporation)
 Capacity : 225 MW + 170 Mcal/hr
 Main Characteristics
‐ Type : Combined Cycle Power Plant + District Heating
‐ GTG : Siemens SGT6‐3000E, 120 MW
‐ Cooling Method : District Heater
‐ Configuration : 1 on 1 + District Heater
 Roles :
The process and mechanical engineering
‐ Performance Guarantee
‐ Heat and Mass Balance Diagram
‐ Auxiliary Power Guarantee
‐ Fuel Gas Supply Systems
‐ GTG Enclosure Vent Systems
‐ Gas Turbine Generator
‐ Fuel Gas Filter
‐ Fuel Gas Heater
‐ Fuel Gas Scrubber
‐ Fuel Gas Drain Tank
 Godeok Combined Heat and Power Plant
 Location : Korea

14. CURRICULUM VITAE Samdoo JUNG
14
 Period : MAY‐2008 ~ SEP‐2009
 Owner : SK ENS
 Capacity : 940 MW
 Main Characteristics
‐ Type : Combined Cycle Power Plant
‐ GTG : Siemens SGT6‐5000F, 205 MW
‐ Cooling Method : Cooling Tower
‐ Configuration : 3 on 1 x 1 block
 Roles :
The process and mechanical engineering
‐ Circulating Water System
‐ Auxiliary Circulating Water System
‐ Condenser Air Removal System
‐ Steam Turbine Generator
‐ Condenser Vacuum Pumps
‐ Circulating Water Pumps
‐ Auxiliary Circulating Water Pumps
 Songdo Combined Cycle Power Plant
 Location : Korea
 Period : APR‐2008 ~ OCT‐2009
 Owner : Songdo Power
 Capacity : 1,100 MW
 Main Characteristics
‐ Type : Combined Cycle Power Plant
‐ GTG : GE 7FB, 185 MW
‐ Cooling Method : Sea Water Cooled Surface Condenser
‐ Configuration : 2 on 1 x 2 blocks
 Roles :
The process and mechanical engineering
‐ Circulating Water System
‐ Auxiliary Circulating Water System
‐ Condenser Air Removal System
‐ Steam Turbine Generator
‐ Condenser Vacuum Pumps
‐ Circulating Water Pumps
‐ Auxiliary Circulating Water Pumps
 Songdo Combined Heat and Power Plant
 Location : Korea
 Period : JUN‐2006 ~ FEB‐2007
 Owner : INTECO (Incheon Total Energy Company)
 Capacity : 205 MW + 170 Mcal/hr
 Main Characteristics

15. CURRICULUM VITAE Samdoo JUNG
15
‐ Type : Combined Cycle + District Heating
‐ GTG : GE 6FA, 75 MW
‐ Cooling Method : District Heater and Air Cooled Condenser
‐ Configuration : 2 on 1 + District Heater
 Roles :
The process and mechanical engineer
‐ Performance Engineering with the heat and mass balance
diagrams
‐ In charge of the system and the equipment
 Main Steam System
 Main Condensate System
 DH Condensate System
 District Heating System
 District Heating Economizer System
 Circulating Water System
 Closed Cooling Water System
 Waste Water Transfer System
 Heat Recovery Steam Generator
 Steam Turbine Generator
 Air Cooled Condensers
 DH Condensate Pump
 Main Condensate Pump
 Closed Cooling Water Pump
 Closed Cooling Water Cooler
 District Heaters
 DH Water Pumps
 Sump Pumps
 Incheon Combined Cycle Power Plant Unit #2
 Location : Korea
 Period : AUG‐2006 ~ DEC‐2006
 Owner : Korea Midland Power Corporation
 Capacity : 500 MW
 Main Characteristics
‐ Type : Combined Cycle
‐ GTG : GE 7FA, 175 MW
‐ Cooling Method : Sea Water Cooled Surface Condenser
‐ Configuration : 2 on 1 x 1 block
 Roles :
The process and mechanical engineer
‐ In charge of the system and the equipment
 Condensate System
 Closed Cooling Water System
 Condenser Air Removal System

16. CURRICULUM VITAE Samdoo JUNG
16
 Surface Condenser
 Condensate Pumps
 Debris Filters
 Condenser Tube Cleaning Package
 General Service Pumps
 Condenser Vacuum Pumps
 Closed Cooling Water Pumps
 Closed Cooling Water Coolers
 CEBU Thermal Power Plant
 Location : Philippines
 Period : JUN‐2005 ~ NOV‐2005
 Owner : KEPCO Philippines Corporation
 Capacity : 200 MW
 Main Characteristics
‐ Type : Coal Fired Thermal Power Plant
‐ Boiler : CFBC, Subcritical
‐ Cooling Method : Sea Water Cooled Surface Condenser
‐ Configuration : 100 MW x 2 blocks
 Roles :
The process and mechanical engineer
‐ In charge of the system and the equipment
 Closed Cooling Water System
 Waste Water Transfer System
 Closed Cooling Water Pump
 Closed Cooling Water Cooler
 Sump Pumps
 Shop Fabricated Tanks
 Tashe Cogeneration Thermal Power Plant
 Location : Taiwan
 Period : OCT‐2003 ~ DEC‐2003
 Owner : Tashe United Co‐generation Corporation.
 Capacity : 50 MW + 120 ton/hr Steam Supply
 Main Characteristics
‐ Type : Thermal Power Plant + Steam Supply
‐ Boiler : CFBC, Subcritical
‐ Cooling Method : Cooling Tower
‐ Configuration : 50 MW x 1 block
 Roles :
The process and mechanical engineer
‐ In charge of the system and the equipment
 Closed Cooling Water System
 Waste Water Transfer System

17. CURRICULUM VITAE Samdoo JUNG
17
 Closed Cooling Water Pump
 Closed Cooling Water Cooler
 Sump Pumps
 Shop Fabricated Tanks
 Tanjung Kasam Coal Fired Power Plant
 Location : Indonesia
 Period : MAR‐2003 ~ JUL‐2003
 Owner : PT PLN Batam
 Capacity : 110 MW
 Main Characteristics
‐ Type : Coal Fired Thermal Power Plant
‐ Boiler : PC, Subcritical
‐ Cooling Method : Sea Water Cooled Surface Condenser
‐ Configuration : 55 MW x 2 blocks
 Roles :
The process and mechanical engineer
‐ In charge of the system and the equipment
 Closed Cooling Water System
 Waste Water Transfer System
 Closed Cooling Water Pump
 Closed Cooling Water Cooler
 Sump Pumps
 Shop Fabricated Tanks
Simulation Tools
Excellent capabilities to handle the essential simulation tools as a power user
such as ;
 GTPRO / STPRO
 GateCycle
 Pipenet
 PROTRAX
Additional
Information
Military Service as a combatant police, Oct.‐1994 to Dec.‐1996
Hansup MBA Academy (Company Special Training), APR‐2015 to SEP‐2015
Construction Management Academy (Company Special Training), APR‐2012 to
SEP‐2012
Awards
Daelim’s Employee of the year in 2014