1. RIZWAN KHAN
House No. 43, block F, Defence view
Phase 2, Karachi South
Skype: rizwan-khan170
Contact no. +966 58 336 7446
Date of Birth: 12/12/1991
PEC Reg No: MECH/27287
rizwankhan170@gmail.com
Current location: Khobar, Saudi Arabia
OBJECTIVE
By the utilization of available resources, acquired skills, proper planning, and hard work to achieve the goal
within desired time frame and prove myself one of the best Mechanical Engineer of an organization.
EDUCATION
YEAR INSTITUTE DEGREE PROGRAM PERCENTAGE
/ GPA/GRADE
Jan-2010-Dec-
2013
NEDUET BE Mechanical
Engineering
3.4
2007-2009 Govt. Nabi Bagh Z.M
Science College
HSC Certificate Pre-Engineering 80%
2007 F.G.Public School
Karachi Cant
SSC Certificate Matric Science 65%
EXPERIENCE/TRAININGS/SHORT COURSES
Current
• Working as Mechanical Engineer(in Planning) in Enterprise future construction, Saudi
Arabia
Responsibilities:
o Preparing master schedule (WBS) on Primavera P6 of different milestones based on
given contract
o Identifying project deliverables, milestones or necessary tasks in order to allocate
available resources to them.
o Monitoring critical path activities in master schedule so that the project should be
within scope (Time, cost and quality)
o Monitoring day to day activities and presenting weekly and monthly progress report
against plan.
o Tracking, monitoring and forecast of all activities and deliverables.
o Reporting to Project manager about current work progress and comparing actual
work against plan work to show progress of the work (Also on network diagrams)
o Incorporating earn value cost so that difference of actual cost and earn value cost is
highlighted.
o Modifying master schedule on request of scope change.
o Developing and monitoring resource( manpower and equipment) histogram.
o Participating in different meetings.
o Prepared work method of statement in the initial phase of project.
o Study of All tender documents received from Client such as Drawings, BOQ &
Specifications specially of Fabrication & erection of structural steel.
o Estimating whatever possible based on given drawings

2. Past:
• Worked as Trainee Engineer in Unilever 3P, Futehally Chemicals Pvt. Ltd, in an
Engineering Department from Dec 16, 2013 to Feb 3, 2016
Responsibilities:
Projects:
o Involved in Planning, Estimating, managing and controlling of different small and
large Projects, including successful commissioning of New Plant.
o Tracking Project activities against Project plan (Primavera p6)
o Making brief and summarized Project Progress Reports
o Making and maintaining Project Key Performance Indicators
o Updating some of Project Plans to include changes
o Attending Daily Project Meetings
o Analyzing the comparative Sheets of final Bills so that most important and urgent
work to be done in that Purchase Order (PO) without making of new PO.
o Responsible for Identifying, Analyzing, Measuring and Controlling Project Risks
o Involve in Feasibility studies, Development of P&ID's, PFD'S and layouts of
Proposed Projects which include relocation of Rework system, Dust collection
system, Designing and installation of Deaerator System etc.
o Keeping an eye on the issuance of “Permit to work” to contractors Also making and
keeping a record of a punch list of different works from contractors.
o Location of rework System is reviewed by me and changed the current layout of it;
the purpose of doing so was to minimize the load on pump/motor (by reducing large
discharge pipeline and thus bends), reduction in electricity consumption and
Effective use of Rework.
o Some of the Projects are Pumps fitting and associated piping, Fabrication, and
Installation of conical SS 316L tanks and associated piping. Design and Installation
of Ventilation Hoppers, Cap, and Bottle Stand, Design of Ventilation Duct lines for
Dust and Fumes Extraction System, Design and installation of Dust collection
System, Installation of Enclosures, platforms, Shifting and installation of Machines,
Installation of Cargo lift Motors
Maintenance:
o Monitoring Planned Maintenance Activities (using TPM) of existing Plant including
Boiler, Compressors, Dust Collectors, Conveyor Belts, Cargo lifts, Bone mixers,
Centrifugal, and Positive displacement Pumps, Vibrating sieve, pipelines/Ducting,
Blower fans etc.
o Managing Key Performance Indicator (KPI’s) to optimize MTTR and MTBF.
o Monitoring Energy Management system of the whole factory.
o Modifying and maintaining the annual maintenance plan of Plant by dividing the
equipment for maintenance on weekly/monthly/quarterly/annual basis. Also
preparing (if required), modifying (if required) and maintaining the check sheets
against the maintenance plan.
o Maintaining the Overall Plant Effectiveness to World Class Manufacturing (WCM)
level.
o Doing RCA of different incidents including of Breakdowns and also making a WAO
stories.
o Planning, Monitoring and implementing annual maintenance of Boiler. Up till now
conducted two annual maintenance activity. Also doing its preventive maintenance
as of critical Part of the company.
o Preparing a record of particular preventive/planned maintenance activities and thus
minimizing the faults which occur again and again.

3. o Monitoring preventive and predictive maintenance of compressors, generators, Fork
lifters. Preparing their maintenance according to weekly, monthly and annual
maintenance plan.
• Certified Course on Project Management Framework and Tools from Ned University with
4.0/4.0 GPA.
• Attended Two days Training on Risk Assessment in Unilever Site, FCL by Mr. Naeem
Sadiq.
• Did Primavera (P6) Software Course from MS logics.
• Did Course Fundamentals of Project Planning and Management from the University of
Virginia.
• Did 5 days course on Lean Manufacturing in Ned University.
•
FINAL YEAR PROJECT
Title: Design of a heat exchanger based on Nano fluid.
• Mathematical modeling of heat exchanger
• Using latest correlations of alumina Nano fluid, measure its heat transfer with different diameters.
• Compare it with a conventional heat exchanger using water as a base fluid keeping other factors into
an account.
SKILLS
Technical Softwares:
• Primavera P6, MS Project, Microsoft Office (Word, Excel, PowerPoint), AutoCAD
REFERENCES
Will be furnished upon request