1. Profile
A Mechanical Engineer with experience in Building Automation System (BAS) and
Equipment Monitoring System (EMS) operation, chiller and Air handling Unit
operation, instrumentation, calibration and validation-requalification,
recertification, and addressing deviations of equipment in cGMP-FDA regulated
work environment. Have an extensive experience in leading a team of multi
discipline of engineers in the design and construction of Industrial Plant Capacity
Expansion and Steam Boiler Plant in a Hazard Analysis and Critical Control Points
(HACCP) regulated work environment. Proficient in AutoCad (3D and Solid). Is
accustomed to applying sharp analytical and problem-solving abilities to identify
and resolve issues.
Accomplishments
METROLOGY SPECIALIST, DENDREON CORPORATION, SEAL BEACH, CA — 2010-2015
• Resolved the High Purity Water Total Organic Carbon calibration issues and
deviations with the application of Fluid Mechanics Principles - adjustment of
the manufacturer recommended flow rate.
• Reviewed and modified HVAC and Humidifier steam-condensate piping revision
plan recommended by the hired consultants and equipment manufacturer that
solved recurring condensate management deviation.
• Completed energy, water and parts potential savings study of Reverse Osmosis
and De- ionized Water System thru review and analysis of 6 months
operational data and recommended the revision of the system Preventive
Maintenance Standard Operation Procedure (SOP).
Richard Erickson
213-675-2843 (MOBILE) 657-214-2279 ((HOME) RFERICKSON2010@GMAIL.COM CYPRESS,
CA
906
906
30

2. • ·Resolved recurring incomplete combustion (air-gas fuel ratio) of 5 water
boilers.
• Identified and resolved the cause of the recurring chiller system 2 breakdown
indicated in the system check feedback as oil low suction pressure.
• Revised Calibration Management Program and Preventive Maintenance Global
Standard Operating Procedures to adhere to FDA requirement.
• Recipient of 2 Hero Awards in recognition of significant achievements:
Completion of cGMP manufacturing equipment and clean-room recertification
without losing production days and completion on time of Seal Beach IMF
modification for automated manufacturing project without compromise to
ongoing manufacturing activities.
ENGINEERING & MAINTENANCE DEPT HEAD, ICEC OIL MILL AND OIL REFINERY DIVISIONS — 1995-2004
 Led the design and construction supervision of Raw Material Procurement
Division receiving facilities consisting of:
 Two Raw Material Dumpers each with a lifting capacity of 50 Metric Ton.
• One unit 29 meters (95 feet) high Continuous Bucket Elevator with a
conveying capacity of 95 MT/hour.
• One unit 68.5 meters (225 feet) long Overhead Stationary Belt Conveyor with
a conveying capacity of 95 MT/hour.
• One unit 47 meters (154 feet) long Overhead Shuttle Belt Conveyor with a
conveying capacity of 95 MT/hr.

3. • One unit 99 meters (325 feet) long Tunnel Belt Conveyor with a capacity of
60 MT/hour.
• Led the design and construction supervision of the Boiler Plant with a
maximum heat input of 6,764.7 kilowatts and a maximum continuous steam
generation of 9,389 kilograms/hour for the 400 MT/day Oil Refinery.
• Led the multi discipline of engineers in the design and construction
supervision of Oil Mill Plant Capacity Expansion: from 325 MT to 600 MT/day of
Crude Natural Oil (CNO).
• Modified the standard operating procedures of expeller synchronization and
ground material preparation resulting in significant increased of CNO
production and low residual oil.
 Organized and implemented, as member of the core group, Hazard Analysis
and Critical Control Points (HACCP), a manufacturing industry quality standard,
in the Oil Mill and Oil Refinery manufacturing.
Education
‣ University of Mindanao, Davao City, Philippines, Bachelor of Science in
Mechanical Engineering
‣ Los Angeles Valley College Job Training, Los Angeles, CA, Bio-Med Healthcare
Academy Bridge Training Program
Certificates and Skills
‣ Professional Regulatory Commission, Philippines

4. Registered Mechanical Engineer
‣ NuAire
Biological Safety Cabinet Class II A2 Service and Certification
‣ Excel, Word, PowerPoint, AutoCAD (3D and Solid), Blue Mountain Regulatory
Asset Manager (BMRAM)