This resume is for Mr. Ramajitti Pasutanavin. He received a Master's degree in Mechanical Engineering from Teesside University in the UK and a Bachelor's degree in Mechanical Engineering from Sirindhorn International Institute of Technology in Thailand. Currently he works as an Inspection Coordinator at Bureau Veritas in Thailand. Previously he held positions as a Machining Engineer and Mechanical Engineer. He has work experience with projects in the oil and gas industry. He also lists coursework, internship experience, extracurricular activities, and English language and computer skills.
1. Ramajitti P. Resume Page 1 of 4
RESUME
PERSONAL BACKGROUND
Name & Surname: Mr. Ramajitti Pasutanavin
Date of Birth: November 12, 1988
Address:
Mobile phone number:
E-Mail:
225/151 Supalai Park Ville 1, Soi Pahol Yothin 48
Pahol Yothin Road, Bangkhen District,
Bangkok 10220, Thailand
+66 96 646 5419
p.ramajitti@gmail.com
ramajitti.trader@gmail.com
EDUCATIONAL BACKGROUND
Academic Year: September 2011–September 2012
Degree/Diploma: MSc Mechanical Engineering
Institute: Teesside University, United Kingdom
- Cumulative GPA: 66% (Refer to MSc Transcript)
Academic Year: June 2007–March 2011
Degree/Diploma: Bachelor of Mechanical Engineering
- Cumulative GPA: 2.47
Institute: Sirindhorn International Institute of Technology (SIIT),
Thammasat University
Academic Year: June 2001–March 2007
Degree/Diploma: High School Diploma (Science-Math Program)
- Cumulative GPA: 3.31
Institute: Phitsanuloke Pittayakom School
EXTRA-CURRICULAR ACTIVITIES AND WORK EXPERIENCE
Professional Experience
Organization: Bureau Veritas (Thailand) Limited.
Position Inspection Coordinator, Industrial Service Depertment
Date: August 2015 - Present
Responsibility: • Coordination with client for definition of scope and
inspection program
• Contact suitable inspectors for the required scope of
inspection
• Collect standards, codes, documents specific to inspection
• Issuance and dispatching of inspection requests and
inspection procedure
• Management and follow-up the inspection required by client
• Check quality, completeness and accuracy of the documents
issued
• Manage the follow up of non-conformities
• Registration, filling and dispatching of inspection certificate
• Reporting to client on result of inspection for vendors
evaluation
• Reporting to client on costs of inspections
• Establish statistics about suppliers and inspection activities
2. Ramajitti P. Resume Page 2 of 4
Organization: Shin-Etsu Magnetic (Thailand) Limited.
Position Machining Engineer, Machining Department
Date: October 2014 – July 2015
Responsibility: • Perform new model design activities in accordance with
Product Specification, Mass Production Specification and
Product Inspection Specification.
• Provide machine services and maintenance activities.
• Analyze machining process to solve production problems i.e.
production defects.
• Analyze production process and perform process
improvement to increase production rate and reduce machine
idle time.
Organization: Technip Engineering (Thailand) Company, Limited
Position Mechanical Engineer, Mechanical Department
Date: April 2013-September 2014
Responsibility: • Responsible for designing and development of engineering
documents like Material Requisition, Scope of Supply,
Mechanical Data Sheet, Technical Specification, Equipment
list etc. for onshore and offshore equipment/packages.
•••• Perform Vendor Document Review
• Handled Equipment / Packages, i.e., Pressure Vessel,
Separator, Hydrocyclone, Scrubber, End Closure for Pig
Launcher and Receiver, Storage Tank, Heat Exchanger,
Potable Water Maker Package
•••• Contact with Vendors to obtain quotations and perform
Technical Clarification with Vendors via EPC Business
Procurement Service,
• Clients:
o Chevron Exploration and Production Company Limited
(CTEP)
o PTT Exploration and Production Public Company,
Limited (PTTEP)
Summary of Work Experience for Projects at Technip Engineering (Thailand) Limited.
2013 Client: Chevron Thailand Exploration and Production Company Limited
Project Description: 61326 – SACPP Compressor Dry Seal Replacement - DD
Project Position: Mechanical Engineer (Static Equipment)
Responsibilities: o Prepare requisition, specification and mechanical data sheet
documents for Nitrogen Buffer Tank
o Perform weight calculation of Nitrogen Buffer Tank using PV-
ELITE software
2013 Client: PTT Exploration and Production Public Company Limited
Project Description: 65106 – Basic Engineering for Arthit South Gathering Platform (AGP)
Project Position: Mechanical Engineer (Static Equipment)
Responsibilities: o Prepare mechanical data sheets for static equipment as follows
• Corrosion Inhibitor Storage Tank
• Open Drain Tank
• HP Vent Knockout Drum
• Fuel Gas Knockout Drum
• Potable Water Storage Tank
o Prepare requisition documents for the following equipment
• Open Drain Tank
• Material Handling Equipment
• Potable Water Storage Tank
• Corrosion Inhibitor Storage Tank
o Prepare specification for Open Drain Tank
3. Ramajitti P. Resume Page 3 of 4
2013 Client: PTT Exploration and Production Public Company Limited
Project Description: 6274 Permanent Production Facilities
Project Position: Mechanical Engineer (Static Equipment)
Responsibilities: o Prepare Technical Bid Tabulation document for the following equipment
• API Storage Tank
• Air Assisted Flare Package
o Pressure Vessels (Air Receiver, Flare Knockout Vessel, Flare Liquid Seal
Drum
2013-2014 Client: Chevron Thailand Exploration and Production Company Limited
Project Description: 61322 UBON Project
Project Position: Mechanical Engineer (Static Equipment)
Responsibilities: o Prepare mechanical data sheets for Pressure Vessels as follows
• Instrument Air Receiver
• Utility Air Receiver
• Nitrogen Gas Receiver
• 1st
Stage Production Compressor Suction Scrubber
• 2nd
Stage Production Compressor Suction Scrubber
• HP Flare Knockout Drum
• LP Flare Knockout Drum
o Prepare mechanical data sheets for Separators as follows
• HP Multi-cyclone Separator
• LP Multi-cyclone Separator
o Prepare Technical Bid Tabulation for Pressure Vessels and Separators
o Prepare RFQ documents (Mechanical Data Sheet, Specification, Material
Requisition and Technical Bid Tabulation) for the following equipment
• Pig Launcher and Receiver End Closures
• Potable Water Maker Package
Courses Attended
05/2013 Mechanical Training of Mechanical Design of Heat Exchangers
– U-Tubesheet Heat Exchanger (Internal Training).
05/2013 Petrochemical Liquid Filtration Training & Seminar (EPC)
by 3M Purification Inc.
07/2013 Basic HSE Onshore / Offshore Training
07/2013 Fundamental Engineering Design for Pressure Vessels
(Training for Power You Program).
08/2013 Liquid Penetrant Examination (PT) & Magnetic Particle
Examination (MT) as Required per ASME CODE.
09/2013 Nitrogen Generation Package -Fundamentals, Design,
Construction & Performance.
09/2013 Safety In Design Training (for Ubon Project, CTEP).
01/2014 Vendor Presentation – Pressure Vessels (By Jord International)
04/2014 Belzona Product for Coating in Oil and Gas Industry
Internships
Organization: Maintenance Department, PTT Exploration and Production
Company Limited, Thailand
Date: March 2010-May 2010
Responsibility: Student Trainee
To perform Performance Testing of the fire water pumps at
S1 Production Plant (Sirikit Oilfield, Kamphaengphet
Province), PTT Exploration and Production Company Limited,
Thailand, and identify actions to improve performance of the
pumps in case any deficiencies were detected.
4. Ramajitti P. Resume Page 4 of 4
Extra-Curricular Activities
Event: MSc Mechanical Engineering Dissertation: Comparison
between Photo-elasticity Stress Analysis and Finite Element
Analysis (FEA)
Date: June 2012 - August 2012
Responsibility: • To perform Experimental Photo-elasticity Stress Analysis
and compare actual testing results with software solutions
from finite element analysis using SolidWorks 2012
• To introduce the photo-elasticity technique to the field of
biomechanics
Event: Trip to Caterpillar Production Station, Middlesbrough, UK.
Date: October 2012
Responsibility: • To study the production process at Caterpillar Production
Station.
Event: Field Trip to Lam Takong and Wang-Noi Power Plants
Date: October 2009
Responsibility: • To study the electricity production processes at Lam Takong
and Wang-Noi Power Plants
Event: SIIT Campus tour
Date: June 2008, June 2009, June 2010
Responsibility: • To introduce the Thammasat University, Rangsit-campus to
first year students & advise how to study in university
ENGLISH LANGUAGE AND COMPUTER SKILLS
English
- Fluent in Both spoken and written English
- TOEIC Score: 835 (2013)
- TU-GET Score: 540 (2010)
- IELTS Score 5.5 (2011)
Computer
- AUTOCAD
- Microsoft Office
- SolidWorks 2012
- NX-Ideas
- PV-Elite