The main component of carbon alloy 4140 is carbon. Carbon is the main element responsible for the different physical and metallurgical characteristics of an alloy.
1. Search... SEARCHSEARCH
RECENT POSTS
Gmex
GMEX sells best alloy pipe
The advantages of steel tube
The best aerospace metal for the
flying world
Quality and right element gives good
results hence choose good quality
aerospace metal
RECENT COMMENTS
ARCHIVES
August 2013
July 2013
June 2013
May 2013
CATEGORIES
Indrustial
Uncategorized
META
Register
Log in
Entries RSS
Comments RSS
WordPress.com
HOW TO GET ALLOY TUBE
VANESSA ODOM
The main component of
carbon alloy 4140 is
carbon. Carbon is the main
element responsible for the
different physical and
metallurgical characteristics
of an alloy. When the
carbon content is more, the
alloy is harder. It is made
stronger too with the
different heat treatments
which are used in
metallurgical industry.
When the alloy pipe is treated at such high temperatures, the melting point of
the alloy is lowered which makes it better for use in different manufacturing
units.
However, the product made is comparatively less durable than other metals
and its weldability property also gets reduced. On the other side, this lack
increases its hardenability. Hardenability is more to your advantage for the
reason that the exterior has good quality wear characteristics and keeps the
core sturdy.
The different heat treatment processes used to change the distinctive chemical
and physical features of steel to create some particular alloy pipe of your
need. Annealing, quenching, and tempering are the commonly used methods
to do it.
Annealing is done to soften the metal by heating the steel at extremely
high temperature, heating above the austenite temperature (or UC) until
the composition is homogeneous.
When you need to strengthen the iron-based alloy more, Tempering is
used. This is done post-hardening. When the metal is heated at a
moderately lower temperature than hardening, the alloy loses surplus
hardness. Further tempering will lead to a more pliable and fracture-
resistant steel.
Quenching is the process where the highly heated work piece is cooled
rapidly with the help of water or oil, to attain some particular degrees of
properties like hardness, brittleness, weldability, etc. This procedure
decreases the crystalline attributes and thus adds to the hardiness of
alloys. Moreover it gives you a strong but brittle marten site structure.
Carbon alloy AISI 4140 can be reinforced to between 18 and 22 Rockwell. This
has the
yield power of 417.1 MPa,
an elongation constant of 25.7 percent, and
Tensile strength of 644 MPa.
GMEX sells best alloy pipe6AUG
2. Share this:
Carbon alloy 4140 is distinguished especially because of its toughness,
incredible torsional strength, and remarkable fatigue strength. AISI 4140 lasts
longer than many other metals and its deteriorating rate is also very low.
The types of carbon alloy can be distinctively classified into mild carbon steel,
low carbon steel and high carbon steel. Among these three, mild carbon steel
is the most widespread form of steel. It is low cost and has fitting qualities for
manifold uses. The stiffness of mild carbon steel can be improved by
carburizing. With carburizing, carbon content on the direct surface is added.
Low carbon steel has lower carbon content and is easier to handle therefore.
Medium carbon alloy, which is most extensively used in various fields including
large projects and for forging and automotive components, have a balanced
mix of ductility, strength, and has great wear opposition. Finally, hard carbon
alloy steel is mostly used for springs and high-strength wires.
Alloy pipe A53 is welded or seamless pipe and alloy pipe A106 is seamless GR
B or Gr C with a 30% highest carbon content. An alloy pipe can be applied for
use in rolls, machines parts, and pipe for carrying liquid or gases.
Continue read about this blog here
3. Leave a Reply
BLOG AT WORDPRESS.COM. THE BUENO THEME.
Like this:
COMMENTS
Leave a Comment
CATEGORIES
Indrustial
← The advantages of steel tube Gmex ®
Loading...
Tags: 4140, aerospace metals, Alloy bar, Alloy pipe, alloy tube, aluminum bar,
aluminum tube, astm steel, Buy Steel, carbon alloy, Gmex, lobal Material
Exchange, metal service centers, Stainless bar, Stainless pipe, Stainless tube,
Steel plate, structural metal, teel tube
Enter your comment here...Enter your comment here...