Automation Training with placement in core sector

•Download as PPTX, PDF•

0 likes•28 views

SR Thermonix Technologies is a best training and placement company in India. We trained fresher student and placed in our own company SR Turbo Energy Pvt. Ltd. and our clients company.

Engineering

Automation Training with placement in core sector

Recently uploaded

Introduction to Geographic Information Systems

Ange Felix NSANZIYERA

fitting shop and tools used in fitting shop .ppt

AfnanAhmad53

Fundamentals of Internet of Things (IoT) Part-2

ChandrakantDivate1

Signal Processing and Linear System Analysis

National Chung Hsing University

The purpose of Integrated Test Rig is to assess performance of Fuel Cooled Oil Cooler (FCOC), HP Pump & Oil Pump prior to fitment on Aero Engine. The design of rig is such that it can cater to individual testing of individual LRU or integrated testing of all the LRU’s installed together (in combination). The pumps under test shall be mounted directly on the high-speed electric motor flange through adapter quill shaft assembly. Variable speed drives shall be provided for all the pumps under testing. The rig shall cater for real time monitoring and recording of performance parameters. KEY FEATURES Key features of this Rig are as follows: - 1. It has separate power packs for both the fluids i.e. ATF Power pack for ATF Fluid, OX Power Pack for OX-27 Oil. 2. This Rig is designed for high temperature Application. It works on 200 deg. Celsius. 3. Two Dedicated heating systems have been integrated with this Rig to raise the temperature of OX-27 Oil. 4. In both Power Packs insulated tanks are being used, which is good for safe operation and safety of operator. 5. This rig is designed in such a way, that it’s OX power pack is in its left side, ATF Power pack is in right Side and test bed is in Centre. 6. A big Test bed have been provided for smooth testing of UUT’s. 7. All piping is being insulated for safe operation and maintenance. 8. It comprises with DAQ System. 9. This rig can test several components at a time, together or separately. Application All the UUT’s are mounted on HTFE-25 Engine after successful performance testing of those. Application of this Rig are as follows: - 1. One of its application is to test LP Pump of HTFE-25. It is designed for functional testing of LP Pump. a. Free Flow Test b. Load Test 2. It is used to test HP Pump of HTFE-25. It is designed for functional testing of HP Pump. a. Free Flow Test b. Load Test 3. It is used to test Oil Pump of HTFE-25. It is designed for functional testing of Oil Pump. 4. It is used to test FCOC of HTFE-25.

Integrated Test Rig For HTFE-25 - Neometrix

Neometrix_Engineering_Pvt_Ltd

Robotics is an exciting and rapidly evolving field that combines engineering, computer science, and technology. Robots are versatile machines capable of automating a wide range of tasks with precision, speed, and power. This introduction will explore the history, components, and applications of this transformative technology. A robot is an electromechanical machine designed to perform tasks autonomously or semi-autonomously. Robots are controlled by sophisticated software and can be programmed to carry out a variety of functions. Robots use sensors to gather information about their environment and actuators to interact with it. The concept of automata, or self-operating machines, dates back to ancient civilizations such as Greece and China. The development of industrial machinery in the 18th and 19th centuries paved the way for modern robotics. The advent of computers in the 20th century enabled the creation of more advanced, programmable robots Industrial robots are commonly used in manufacturing, performing tasks such as welding, painting, and assembly. Service robots are designed to assist humans in tasks like cleaning, transportation, and healthcare Humanoid robots are designed to mimic the appearance and functionality of the human body. Mechanical Structure Robots have a physical frame, joints, and linkages that allow for movement and manipulation. Power Source Robots require a power source, such as batteries or electrical connections, to operate. Control System The control system, often a computer or microcontroller, coordinates the robot's actions and movements End Effectors Robots may have specialized tools, such as grippers or tools, to interact with their environment Cameras and other vision sensors allow robots to perceive and respond to their environment. Ultrasonic and infrared sensors help robots detect and avoid obstacles. Tactile sensors enable robots to feel and interact with their surroundings. Motors, servos, and other actuators allow robots to move and manipulate objects. Robots are controlled by sophisticated software that defines their behaviors and decision-making processes. Algorithms enable robots to process sensor data, plan actions, and execute tasks autonomously. Advancements in machine learning allow robots to adapt and improve their performance over time. Applications of Robotics Robots are widely used in industrial settings for tasks such as assembly, welding, and packaging. Robotic systems are revolutionizing medicine, from surgical assistants to rehabilitation devices. Robots are essential for exploring hazardous environments, such as deep-sea and outer space

Introduction to Robotics in Mechanical Engineering.pptx

hublikarsn

Worksharing and 3D Modeling with Revit.pptx

Mustafa Ahmed

NO1 Top No1 Amil Baba In Azad Kashmir, Kashmir Black Magic Specialist Expert ...

Amil baba

Max. shear stress theory-Maximum Shear Stress Theory Maximum Distortional ...

ronahami

8th International Conference on Soft Computing, Mathematics and Control (SMC 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications impacts and challenges of Soft Computing, Mathematics and Control. The conference documents practical and theoretical results which make a fundamental contribution for the development of Soft Computing, Mathematics and Control. The aim of the conference is to provide a platform to the researchers and practitioners from both academia as well as industry to meet and share cutting-edge development in the field.

8th International Conference on Soft Computing, Mathematics and Control (SMC ...

josephjonse

In the dynamic landscape of energy storage, choosing the right battery pack is a critical decision that significantly impacts performance, efficiency, and overall product design. This webinar aims to unravel the complexities surrounding standard and custom battery packs (primarily lithium), providing you with a comprehensive understanding to make informed decisions. We'll embark on a journey to explore the fundamental distinctions between standard off-the-shelf battery packs and their bespoke counterparts tailored to specific applications. We will delve into the nuance of what is defined as a standard battery pack along with its benefits, limitations, and how it caters to broad market needs. Simultaneously, we will dissect the world of custom battery packs, diving into the advantages they offer in terms of precise energy requirements, form factors, and unique design considerations. Whether you are a product designer, engineer, or industry professional, this webinar is designed to equip you with the knowledge necessary to navigate the intricate terrain of battery pack selection. Join us for this webinar as we navigate through the intricacies of standard and custom battery packs, empowering you to make strategic decisions that align with your project goal. For more information on our battery pack solutions, visit https://www.epectec.com/batteries/.

Standard vs Custom Battery Packs - Decoding the Power Play

Epec Engineered Technologies

The project Hospital Management system includes registration of patients, storing their details into the system, and also computerized billing in the pharmacy, and labs. The software has the facility to give a unique id for every patient and stores the details of every patient and the staff automatically. It includes a search facility to know the current status of each room. User can search availability of a doctor and the details of a patient using the id. The Hospital Management System can be entered using a username and password. It is accessible either by an administrator or receptionist. Only they can add data into the database. The data can be retrieved easily. The interface is very user-friendly. The data are well protected for personal use and makes the data processing very fast. Hospital Management System is powerful, flexible, and easy to use and is designed and developed to deliver real conceivable benefits to hospitals. Hospital Management System is designed for multispecialty hospitals, to cover a wide range of hospital administration and management processes. It is an integrated end-to-end Hospital Management System that provides relevant information across the hospital to support effective decision making for patient care, hospital administration and critical financial accounting, in a seamless flow. Hospital Management System is a software product suite designed to improve the quality and management of hospital management in the areas of clinical process analysis and activity-based costing. Hospital Management System enables you to develop your organization and improve its effectiveness and quality of work. Managing the key processes efficiently is critical to the success of the hospital helps you manage your processes.

Hospital management system project report.pdf

Kamal Acharya

Convergence of Robotics and Gen AI offers excellent opportunities for Entrepr...

ssuserdfc773

We investigated the applicability and efficiency of the MLMC approach to the Henry-like problem with uncertain porosity, permeability and recharge. These uncertain parameters were modelled by random fields with three independent random variables. Permeability is a function of porosity. Both functions are time-dependent, have multi-scale behaviour and are defined for two layers. The numerical solution for each random realisation was obtained using the well-known ug4 parallel multigrid solver. The number of random samples required at each level was estimated by calculating the decay of the variances and the computational cost for each level. The MLMC method was used to compute the expected value and variance of several QoIs, such as the solution at a few preselected points $(t,\bx)$, the solution integrated over a small subdomain, and the time evolution of the freshwater integral. We have found that some QoIs require only 2-3 mesh levels and samples from finer meshes would not significantly improve the result. Other QoIs require more grid levels.

litvinenko_Henry_Intrusion_Hong-Kong_2024.pdf

Alexander Litvinenko

Introduction to Serverless with AWS Lambda

Omar Fathy

Ground Improvement Technique: Earth Reinforcement

Dr. Deepak Mudgal

Microprocessors & Microcontrollers: Interrupt controller 8259; The 8259 is known as the Programmable Interrupt Controller (PIC) microprocessor. In 8085 and 8086 there are five hardware interrupts and two hardware interrupts respectively. Bu adding 8259, we can increase the interrupt handling capability. This chip combines the multi-interrupt input source to single interrupt output. This provides 8-interrupts from IR0 to IR7. Let us see some features of this microprocessor. This chip is designed for 8085 and 8086. It can be programmed either in edge triggered, or in level triggered mode We can mask individual bits of Interrupt Request Register. By cascading 8259 chips, we can increase interrupts up to 64 interrupt lines Clock cycle is not needed. 8259 microprocessor can be programmed according to given interrupts condition and it can be provided either with level or edge-triggered interrupt level. It can be programmed to either work in 8085 or in 8086 microprocessors. Individual interrupt bits can be masked. By cascading Nine 8259’s in Master-Slave Configuration we can handle up to 64 interrupt pins. It contains 3 registers commonly known as ISR, IRR, IMR & there is 1 priority resolver (PR). Interrupt Request Register (IRR): It stores those bits which are requested for their interrupt services. Interrupt Service Register (ISR): It stores the interrupt levels which is currently being served. Interrupt Mask Register (IMR): It stores interrupt levels that have to be masked. These interrupt levels are already accepted by the 8259 microprocessor. Priority Resolver (PR): It examines all the 3 registers and sets the priority of interrupts and sets the interrupt levels in ISR which has the highest priority and the rest of the interrupt bit is IRR which is already accepted. SP/EN (low active pin): If its value is 1 it works in master mode & if its value=e is 0 then it works in slave mode. Cascade Buffer: It is used to cascade more number of Programmable Interrupt Controller to increase the interrupts handling capability up to 64 levels. Advantages: Interrupt management: The 8259 microprocessor is a specialized chip that is dedicated to managing interrupts, which can help to improve system performance and reduce the workload on the main CPU. Programmability: The 8259 microprocessor is programmable, which means that it can be customized to handle specific types of interrupts and to prioritize different interrupt requests. Compatibility: The 8259 microprocessor is compatible with a wide range of microprocessors, making it a popular choice for interrupt management in many different systems. Multiple interrupt inputs: The 8259 microprocessor can handle multiple interrupt inputs, which makes it a useful peripheral for managing complex systems with multiple devices. Ease of use: The 8259 microprocessor includes simple interface pins and registers, making it relatively easy to use and program.

INTERRUPT CONTROLLER 8259 MICROPROCESSOR

TanishkaHira1

Passive Air Cooling System and Solar Water Heater.ppt

amrabdallah9

Compressing and Sparsifying LLM in GenAI Applications

MFatihSIRA

Theory of Time 2024 (Universal Theory for Everything)

Ramkumar k

Recently uploaded (20)

Introduction to Geographic Information Systems

fitting shop and tools used in fitting shop .ppt

Fundamentals of Internet of Things (IoT) Part-2

Signal Processing and Linear System Analysis

Integrated Test Rig For HTFE-25 - Neometrix

Introduction to Robotics in Mechanical Engineering.pptx

Worksharing and 3D Modeling with Revit.pptx

NO1 Top No1 Amil Baba In Azad Kashmir, Kashmir Black Magic Specialist Expert ...

Max. shear stress theory-Maximum Shear Stress Theory Maximum Distortional ...

8th International Conference on Soft Computing, Mathematics and Control (SMC ...

Standard vs Custom Battery Packs - Decoding the Power Play

Hospital management system project report.pdf

Convergence of Robotics and Gen AI offers excellent opportunities for Entrepr...

litvinenko_Henry_Intrusion_Hong-Kong_2024.pdf

Introduction to Serverless with AWS Lambda

Ground Improvement Technique: Earth Reinforcement

INTERRUPT CONTROLLER 8259 MICROPROCESSOR

Passive Air Cooling System and Solar Water Heater.ppt

Compressing and Sparsifying LLM in GenAI Applications

Theory of Time 2024 (Universal Theory for Everything)

Featured

PEPSICO Presentation to CAGNY Conference Feb 2024

Neil Kimberley

Content Methodology: A Best Practices Report (Webinar)

contently

How to Prepare For a Successful Job Search for 2024

Albert Qian

A report by thenetworkone and Kurio. The contributing experts and agencies are (in an alphabetical order): Sylwia Rytel, Social Media Supervisor, 180heartbeats + JUNG v MATT (PL), Sharlene Jenner, Vice President - Director of Engagement Strategy, Abelson Taylor (USA), Alex Casanovas, Digital Director, Atrevia (ES), Dora Beilin, Senior Social Strategist, Barrett Hoffher (USA), Min Seo, Campaign Director, Brand New Agency (KR), Deshé M. Gully, Associate Strategist, Day One Agency (USA), Francesca Trevisan, Strategist, Different (IT), Trevor Crossman, CX and Digital Transformation Director; Olivia Hussey, Strategic Planner; Simi Srinarula, Social Media Manager, The Hallway (AUS), James Hebbert, Managing Director, Hylink (CN / UK), Mundy Álvarez, Planning Director; Pedro Rojas, Social Media Manager; Pancho González, CCO, Inbrax (CH), Oana Oprea, Head of Digital Planning, Jam Session Agency (RO), Amy Bottrill, Social Account Director, Launch (UK), Gaby Arriaga, Founder, Leonardo1452 (MX), Shantesh S Row, Creative Director, Liwa (UAE), Rajesh Mehta, Chief Strategy Officer; Dhruv Gaur, Digital Planning Lead; Leonie Mergulhao, Account Supervisor - Social Media & PR, Medulla (IN), Aurelija Plioplytė, Head of Digital & Social, Not Perfect (LI), Daiana Khaidargaliyeva, Account Manager, Osaka Labs (UK / USA), Stefanie Söhnchen, Vice President Digital, PIABO Communications (DE), Elisabeth Winiartati, Managing Consultant, Head of Global Integrated Communications; Lydia Aprina, Account Manager, Integrated Marketing and Communications; Nita Prabowo, Account Manager, Integrated Marketing and Communications; Okhi, Web Developer, PNTR Group (ID), Kei Obusan, Insights Director; Daffi Ranandi, Insights Manager, Radarr (SG), Gautam Reghunath, Co-founder & CEO, Talented (IN), Donagh Humphreys, Head of Social and Digital Innovation, THINKHOUSE (IRE), Sarah Yim, Strategy Director, Zulu Alpha Kilo (CA).

Social Media Marketing Trends 2024 // The Global Indie Insights

Kurio // The Social Media Age(ncy)

The search marketing landscape is evolving rapidly with new technologies, and professionals, like you, rely on innovative paid search strategies to meet changing demands. It’s important that you’re ready to implement new strategies in 2024. Check this out and learn the top trends in paid search advertising that are expected to gain traction, so you can drive higher ROI more efficiently in 2024. You’ll learn: - The latest trends in AI and automation, and what this means for an evolving paid search ecosystem. - New developments in privacy and data regulation. - Emerging ad formats that are expected to make an impact next year. Watch Sreekant Lanka from iQuanti and Irina Klein from OneMain Financial as they dive into the future of paid search and explore the trends, strategies, and technologies that will shape the search marketing landscape. If you’re looking to assess your paid search strategy and design an industry-aligned plan for 2024, then this webinar is for you.

Trends In Paid Search: Navigating The Digital Landscape In 2024

Search Engine Journal

From their humble beginnings in 1984, TED has grown into the world’s most powerful amplifier for speakers and thought-leaders to share their ideas. They have over 2,400 filmed talks (not including the 30,000+ TEDx videos) freely available online, and have hosted over 17,500 events around the world. With over one billion views in a year, it’s no wonder that so many speakers are looking to TED for ideas on how to share their message more effectively. The article “5 Public-Speaking Tips TED Gives Its Speakers”, by Carmine Gallo for Forbes, gives speakers five practical ways to connect with their audience, and effectively share their ideas on stage. Whether you are gearing up to get on a TED stage yourself, or just want to master the skills that so many of their speakers possess, these tips and quotes from Chris Anderson, the TED Talks Curator, will encourage you to make the most impactful impression on your audience. See the full article and more summaries like this on SpeakerHub here: https://speakerhub.com/blog/5-presentation-tips-ted-gives-its-speakers See the original article on Forbes here: http://www.forbes.com/forbes/welcome/?toURL=http://www.forbes.com/sites/carminegallo/2016/05/06/5-public-speaking-tips-ted-gives-its-speakers/&refURL=&referrer=#5c07a8221d9b

5 Public speaking tips from TED - Visualized summary

SpeakerHub

Everyone is in agreement that ChatGPT (and other generative AI tools) will shape the future of work. Yet there is little consensus on exactly how, when, and to what extent this technology will change our world. Businesses that extract maximum value from ChatGPT will use it as a collaborative tool for everything from brainstorming to technical maintenance. For individuals, now is the time to pinpoint the skills the future professional will need to thrive in the AI age. Check out this presentation to understand what ChatGPT is, how it will shape the future of work, and how you can prepare to take advantage.

ChatGPT and the Future of Work - Clark Boyd

Clark Boyd

Getting into the tech field. what next

Tessa Mero

Google's Just Not That Into You: Understanding Core Updates & Search Intent

Lily Ray

How to have difficult conversations

Rajiv Jayarajah, MAppComm, ACC

Introduction to Data Science

Christy Abraham Joy

Time Management & Productivity - Best Practices

Vit Horky

The six step guide to practical project management If you think managing projects is too difficult, think again. We’ve stripped back project management processes to the basics – to make it quicker and easier, without sacrificing the vital ingredients for success. “If you’re looking for some real-world guidance, then The Six Step Guide to Practical Project Management will help.” Dr Andrew Makar, Tactical Project Management

The six step guide to practical project management

MindGenius

Beginners Guide to TikTok for Search - Rachel Pearson - We are Tilt __ Bright...

RachelPearson36

During this webinar, Anand Bagmar demonstrates how AI tools such as ChatGPT can be applied to various stages of the software development life cycle (SDLC) using an eCommerce application case study. Find the on-demand recording and more info at https://applitools.info/b59 Key takeaways: • Learn how to use ChatGPT to add AI power to your testing and test automation • Understand the limitations of the technology and where human expertise is crucial • Gain insight into different AI-based tools • Adopt AI-based tools to stay relevant and optimize work for developers and testers * ChatGPT and OpenAI belong to OpenAI, L.L.C.

Unlocking the Power of ChatGPT and AI in Testing - A Real-World Look, present...

Applitools

12 Ways to Increase Your Influence at Work

GetSmarter

ChatGPT webinar slides

Alireza Esmikhani

More than Just Lines on a Map: Best Practices for U.S Bike Routes

Project for Public Spaces & National Center for Biking and Walking

Has your project been caught in a storm of deadlines, clashing requirements, and the need to change course halfway through? If yes, then check out how the administration team navigated through all of this, relocating 160 people from 3 countries and opening 2 offices during the most turbulent time in the last 20 years. Belka Games’ Chief Administrative Officer, Katerina Rudko, will share universal approaches and life hacks that can help your project survive unstable periods when there seem to be too many tasks and a lack of time and people.

Ride the Storm: Navigating Through Unstable Periods / Katerina Rudko (Belka G...

DevGAMM Conference

Barbie - Brand Strategy Presentation

Erica Santiago

Featured (20)