Jerazen Mondejar is seeking a responsible position utilizing his experience maintaining aircraft interiors and components. He has over 20 years of experience performing maintenance, repairs, inspections and troubleshooting on various aircraft models. His qualifications include extensive experience maintaining aircraft seating, interiors, and components.

1. JERAZEN O. MONDEJAR
Aerospec Supplies Pte, Ltd, 81 Ubi Avenue 4#09-25 UB One
Singapore 408830
Email – jerazenm@gmail.com
Mobile number – +6582509916
OBJECTIVE
A responsible position where diversified, results oriented, hard work and
experience in aircraft maintains can be utilized productively.
DESCRIPTIONS FOR AIRCRAFT INTERIORS CABIN
Aircraft interior technician inspect, remove, and install aircraft interior pieces,
including doors, bulkheads, and lavatories, sound-proofing mechanisms, lighting,
cabinets, or wall panels, Aircraft interior technicians might be part of a customization
service for particular aerospace clients. And responsible for ensuring that work meets
federal Aviation Administration (FAA) standards.
Operates machines as required. Insures that assigned functions are conducted in
accordance with established with policies and procedures, That quality standards are met
Inspect, troubleshoot, test repair, and maintain aircraft including upholstery, carpet,
cabinetry, other cabin furnishing or exceeded, and that related documentation is accurate
and complete.
Maintenance repair and overhaul services at both seats and component levels
through authorized on site repair stations. Attach bindings or apply solutions to edges of
cut material to prevent raveling. Build –up aircraft seats, typically leather and interior
components.
QUALIFICATIONS
Extensive experience in all aspect of maintains, repair, inspection, trouble shooting
and servicing of B-737-200/300/800, B -767, B777-200/300, -747-200-300 -400, A-319,
A320, A321, A330-200-300, A340-200-500-600, A380, M D-90, M D-11, C – 130E/H, C -
130-L-100-20 aircraft and installed components.
WORK HISTORY

2.  24th
Feb. 2016 up to present Aerospec Supplies Pte, Ltd, 81 Ubi Avenue 4#09-25
UB One, Singapore 408830
 27th
July 2011 up to 24th
May 2013 Singapore Airlines/Singapore JAMCO Private
Limited, No. 8 Loyang Lane, Singapore 508915
 06th
April 2011 up to July20, 2011SASCOBase Maintenance ST Aerospace Services
Co Pte. Ltd. 8 Changi North Way Singapore 499611
 28th
March 2007 to 31st
March 2011 Bahrain Airport Services Line Maintenance
Engineering P.O. Box 22285 Kingdom of Bahrain.
 03rd
July 2006 up to 27th
Dec 2006
SASCO ST Engineering (Base Maintenance)
Under AJI International Pte. Ltd.
750C Chai Chee Road # 02—2 Techno Park
Chai Chee Singapore 469003
 08th
Dec 2004 to 30th
June 2006
Singapore Airlines, Thru Singapore JAMCO Private Limited
Under A.J.I International Pte. Ltd.
Aviation Jobs International Pte, Ltd.
750C Chai Chee Road # 02—2 Techno Park
Chai Chee Singapore 469003
 27th
Dec 2003 to 05th
Nov. 2004
ST Aerospace Engineering Base Maintenance
Aviation Jobs International Pte, Ltd.
750C Chai Chee Road # 02—2 Techno Park
Chai Chee Singapore 469003
 15th
May 2003 to 24th
July 2003
Aircraft Generation Flight (AGF)
Difa O&M Co. Ltd. C-130/ Casa Program,
Prince Sultan Airbase, Al-Kharj, Riyadh KSA.
 16th
May 1996 to 03rd
March 2002
Lockheed martin Middle – East Sv. C-130 (J) Program,
Prince Abdullah Airbase, Jeddah KSA.

3.  26th
May 2013 up to present
Small scale mining Business
DUTIES AND RESPONSIBILITIES ON AIRCRAFT
B737-200/300/800/B-767/757, B-777-200-300, B747-200/300/400, A-319,
A320, A321, A330-200, A330-300, A340-500, A380, M D-90, MD-11, C-130E/H, C-
130-L-100-20
 Perform line maintenance check of aircraft such as transit check, service
check, A check, B check. Servicing, aircraft towing, marshalling, refueling and
defueling, service bulletin in accordance with maintenance manual removal
and installation of parts and components of the aircraft.
 Perform Aircraft maintenance C&D check, installation of parts and
components of aircraft, repair, troubleshooting, rigging, assembly and
disassembly of engine parts of JT8D/T -56 & CFM-56-300.
 Perform removal/installation of Galley Module on heavy maintenance
check. Galley defects check, rectification and modification.
 Perform Composite fiber glass – repair panel, cowling, blankets removal,
and hot bonding/sanding of all composite materials of aircraft with the
quality standard set by the manufacturer specification.
 Perform minor sheet metal repair and modification of galleys, lavatories and
its accessories, kickboards and check strips, overhead stowage bins, side
walls and ceiling panels, and other interior furnishing within the specified
ground time to maintain service ability and presentable appearance of the
aircraft.
 Removal/installation of Lavatory Module during heavy maintenance checks
and perform lavatory parts function test. Defect inspection,
removal/installation of lavatory including leak checks on waste and water
line.
 Perform checks, rectification, and removal/installation of aircraft stowage
bin module. Removal/installation of ceiling panel, DADO panels, side wall
panels including replacement or cleaning of window shades, outer and inner
window panels.

4.  Removal/installation of aircraft door trim panel and escape slide /raft.
 Removal/installation of aircraft interior dividers, crew bunks and closets
during heavy maintenance checks. Checks rectification and modification of
parts thereof.
 Removal/installation of aircraft floorboards including application of anti-
corrosion chemicals underneath metal frames and sealant application of wet
parts areas.
 Perform checks, removal/installation of aircraft fabrics such as carpets,
curtain, galley mats, passenger and attendant seat covers.
 Check, removal and replacement of emergency loose equipment. Check for
its serviceability, physical appearances, pressures (pressurized bottles) seals
and due dates.
 All performed task are directed by the service engineer and senior
technician and in accordance with the company policies, standards and
procedures, manufacture's specifications and standards, government
regulations and contract specifications as applicable on the aircraft and
related accessories for compliance.
 Perform inspection, functional checks, preventive maintenance on aircraft
and installed equipment. Performs Pre-flight, Post-flight, thru flight calendar
isochronal, and periodic/phase inspection on aircraft including structures,
landing gears, engines instruments, cockpits, cabin flight, surfaces and
controls. Inspect and performs functional checks of aircraft system such as
hydraulic, electrical, pressurization, lubrication, anti-icing vacuum, induction
and exhaust and installed equipment such as external tanks, tow reels, hoist
and auxiliary power units. Inspect aircraft components for cleanliness,
alignment and proper clearance and operation, evidence of wear cracks and
looseness in accordance with technical orders. Launches and recovers
aircraft.
 Repairs, maintains and service aircraft and installed equipment. Removes
install and adjust aircraft and systems components such as flight controls,
shock struts, wheels, brakes, tires, cowling, enclosure, hose and tubing.

5.  Determines and accomplishes maintenance actions required to correct
malfunctions indicated in aircraft forms completion of maintenance, clean
aircraft engines. Identifies corrosion and applies protective measures,
troubleshoots malfunction pertaining to aircraft structures, landing gear,
control surface, induction, exhaust, and ventilation and heating systems.
Serviced oil-de-icing, fuel, hydraulic and oxygen (gaseous and liquid)
system. Obtain engine oil samples for analysis. Operates and maintains non-
powered ground equipment. Performs assigned maintenance on aircraft
installed auxiliary power unit. Operates and maintains non-powered ground
equipment. Performs assigned maintenance I repair and installation of
aircraft wheel and tire assy. Interprets diagrams and applicable publication.
Completes maintenance data forms.
 Supervised aircraft maintenance personnel. Assigned work and reviews
completed works to ensure compliance with the applicable technical
publications and local procedures. Instructed subordinates in maintenance
of aircraft and installed equipment’s. Ensure compliance with the
appropriate procedures prescribed by siaec/ aerospec supplies pte, ltd.
management's directives conducts on the job training.
EDUCATION
AIRCRAFT MAINTENANCE ENGINEERING
Philippine Air force College of Aeronautics
Mactan Air Base, Lapu-Lapu City, Philippines
LICENSE, A.G.E EQUIPMENT:
 Power On (aircraft)
 Hobart Power
 Manlift 3x17/23
 Forkclift 5K, 10K, 20K
 Clark Tugs (Aircraft Tow Trucks)
 Clark Overhead Crane
 Pick-up Trucks F/L QVA
 NF-2 Light All
 Electric Cart
 High & Low Compressor

6. PERSONAL DATA
Nationality : Filipino
Civil Status : Married
Age : 46 yrs. old
Birth Date : 24th
September 1969
Birth Place : Bulua, Cagayan De Oro City Philippines
REFERENCES
Anthony Lim
Contract manager
Aerospec supplies pte ltd
Olivia Yeoh
General Manager
Aviation Jobs International Pte. Ltd.
Zechariah Dinest Nair
Contract Manager
Aviation Jobs International Pte. Ltd.
JERAZEN O. MONDEJAR
Applicant