1. Page 1 of 9
Curriculum Vitae
AA. Ngurah Ari Suryawan Kencana
ngurahari89@gmail.com; aringurah90@yahoo.com
PERUM PESONA PAKSI BIRU BLOK B NO.9
RT.65 Sepinggan – Balikpapan – Kalimantan Timur
76114
Phone/Mobile: +62542–760356 / +6281251471064
2. Page 2 of 9
PPEERRSSOONNAALL DDEETTAAIILLSS
Full Name AA. Ngurah Ari Suryawan Kencana
Place of Birth Denpasar, Bali
Date of Birth March 28th
, 1981
Gender Male
Religion Moslem
Marital Status Merit
Nationality & Citizenship Indonesia
Contact Address
PERUM PESONA PAKSI BIRU BLOK B NO.9
RT.65 Sepinggan – Balikpapan – Kalimantan
Timur
76114
Phone / Phone Number +62542-760356 / +6281251471064
Email
ngurahari89@gmail.com /
aringurah90@yahoo.com
EEDDUUCCAATTIIOONNaall bbaacckkggrroouunndd
Bachelor Degree
Field of Study : Mechanical Engineering
Institute : National Institute Of Technology, Malang, Indonesia
GPA : 3.28/4
Graduation Date: 4 December 2004
EEmmppllooyymmeenntt HHiissttoorriieess
1. Downhole Tool Mechanical / Electrical Rotary Steerable System GeoPilot
QA/QC and Supervisor ( April 2014 – 26th
March 2016)
Job Assignment as GeoPilot Labuan QA/QC and Supervisor
Halliburton Drilling Service, Malaysia
Duties and Responsibilities:
1. Performs all duties associated with R&M GeoPilot Supervisor and QA/QC
2. Mainly Part of Malaysia Quality Management team for API Q2 certification
3. Organize and coordinate all Geopilot Technician team member daily roles and
duties for Job process execution according to the Job Planning as per
schedule Maintenance GeoPilot level-1 and Level-2 for 9600/7600 and 5200
series.
3. Page 3 of 9
4. Supervises the work to promote a high standard of service quality all
technicians on the R&M GeoPilot service team, including processes,
procedures, paperwork accuracy, safety, etc.
5. Mentors R&M Technicians – GP Tech III, GP Tech II,GP Tech I and GP tech
Trainees
6. Assists R&M Technicians – GP Tech III, GP Tech II,GP Tech I and GP tech
Trainees and R&M Manager - in their roles when necessary
7. Perform an internal spot audit regularly every month to ensure Technicians
perform the task according to procedure, fill up the E-Manual build sheet
properly and utilize a valid calibration equipment every time while execute the
job.
8. Perform competency assessment/RPM to all GeoPilot technicians to close the
gap regularly.
9. Monitoring down-hole GeoPilot equipment operations, and perform a failure
investigation accurately and timely preliminary and provides to Operation
Manager and FSQC, in case any issue occurs during tool downhole to find the
root caused and to mitigate the same issue from repeating in the future.
10.Perform repair cost budget for maintenance GeoPilot tool including cost for
upgrade the tool as per NOMEM to get approval from Country Manager
11.Coordinates with R&M Manager and Operation Manager - GeoPilot to plan
daily equipment priorities and service requirements
12.Reports inventory and asset issues to R&M Manager
13.Maintains all workshop equipment and tools, ensures they are kept in good
condition; all calibrations and certifications are up to date; and the
documentation for both is kept.
14.Maintains a clean and safe work environment, keeping it efficiently organized,
and equipped with necessary supplies and tools.
15.Verifies required service records and documentation prepared by technician
team are completed accurately and kept up to date, electronic copies are
online and hard copies filed.
16.Utilizes all Service Delivery Halliburton management systems including
service records pertaining to service line R&M applications (INSITE, SAP,
Data Reliability, MOC, NCRs, RTA, etc.).
4. Page 4 of 9
17.Performs various other duties and activities as assigned by R&M Manager
within the physical constraints of the job.
18.Demonstrates a personal commitment to Quality, Health, Safety and the
Environment.
• a safe and healthy workplace for all employees;
• enforcing all safety precautions and practices;
• promoting safe work practices;
• Attending mandatory safety meetings and maintaining Company property
and equipment in safe operating conditions at all times.
19.Knows, understands, and promotes (HMS )Halliburton Management system
Process and the Quality Policy and complies with all requirements of the
Quality Systems Manual, Operating and Technical Procedures and Workplace
Instructions
.
2. Downhole Tool Mechanical / Electrical GeoPilot Lead Tech (November 2012 –
March 2014)
Halliburton Drilling Service, Vietnam
Duties and Responsibilities:
1. Organize and coordinate activities surrounding the repair and maintenance of
GeoPilot Tool.
2. Instruct GeoPilot Technician on the proper operation and maintenance of
equipment, train new technicians, and develop skills of current workers
3. Monitoring down-hole GeoPilot equipment operations, ensuring that
maintenance and safety procedures are followed, maintaining inventory,
quality improvement process awareness, and teamwork.
4. Promote safety awareness and environmental consciousness, and comply
with all applicable safety and environmental procedures and regulations.
5. Page 5 of 9
3. Downhole Tool Mechanical / Electrical Technician III (February 2007 –
November 2012)
Halliburton Drilling Service, Indonesia
Duties and Responsibilities:
1. Under general supervision, diagnoses, repairs and performs maintenance on
down-hole tool electronics and other equipment used in the application for
down-hole operations
2. Assembles and disassembles all down-hole tools as per procedure
3. Promote safety awareness and environmental consciousness, and comply
with all applicable safety and environmental procedures and regulations.
4. Sales and Marketing Coordinator (November 2005 – December 2006 )
PT. Franklin Offshore Indonesia
Duties and Responsibilities:
1. Implements marketing and advertising campaigns by assembling and
analyzing sales forecasts; preparing marketing and advertising strategies,
plans, and objectives; planning and organizing promotional presentations;
updating calendars.
2. Supports sales staff by providing sales data, market trends, forecasts,
account analyses, new product information; relaying customer services
requests.
Field work Practice
1. PT. PERTAMINA (PERSERO) UP V Balikpapan in Enj-Pem/JPK Dept
Emphasis on engines maintenance, Manufacturing Process, Energy Conversion, Turbine
and Compressor Engine Performance Testing.
2. PT. PETROSEA Tbk.
Emphasis on Diesel Engine, Overhaul of Heavy Equipment Engine, and Hydraulic
System.
6. Page 6 of 9
TTrraaiinniinngg
Event Vendor Place Duration
Sperry Drilling Leadership Boot
Camp Training in Houston North
Belth
Halliburton Energy
Services
Houston
North Belt
1 week ( July 2014 )
Internal Auditor Training
Quality WBT Centre -
ASQ
Malaysia 1 Week ( June 2014 )
Geo Pilot 7600 & 9600 Power
Unit Course ( Top Student )
Halliburton Energy
Services
Singapore 3 weeks (2011)
Geo Pilot 7600 & 9600 Level 1
Course ( Top Student )
Halliburton Energy
Services
Singapore 3 weeks (2011)
Geo Pilot 7600 & 9600 Level 2
On-Job-Training
Halliburton Energy
Services
Singapore 10 Months (2007)
Geo Pilot 7600 & 9600 Actuator
Course ( Top Student )
Halliburton Energy
Services
Singapore 3 weeks (2007)
Crane Operating Course
Halliburton Energy
Services
Singapore 1 day (2007)
HHiigghhlliigghhtt ooff ddeelliivveerreedd dduuttiieess
Job Description Company Place Duration
Support Geopilot repair and
maintenance
Halliburton Energy
Services
Perth Australia 19 Sept – 6 Oct 2013
Failure investigation for several
Geopilot tool fail during
downhole work closed with
Global Geopilot adviser and
Asia-Pacific Region Reliability
Manager
Halliburton Energy
Services
Brunei
Darussalam
3 – 24 May 2013
Set up Geopilot Shop in new
facility and support Geo Pilot
repair and maintenance
Halliburton Energy
Services
Vung Tau
Vietnam
15 July – 16 August 2012
Support Geopilot Repair and
Maintenance
Halliburton Energy
Services
Labuan
Malaysia
28 Jan – 28 Feb 2012
Set up Geopilot Shop in new
facility and support Geo Pilot
repair and maintenance
Halliburton Energy
Services
Perth Australia 16 Sept – 17 Oct 2011
Set up GeoPilot shop for Exxon
Project
Halliburton Energy
Services
Aktau
Kazakhstan
14 October – 25 November
2010
Support Geo Pilot Repair and
Maintenance
Halliburton Energy
Services
Brunei
Darussalam
May 02 – 27 May,2010
Support Geo Pilot Repair and
Maintenance
Halliburton Energy
Services
Singapore Nov 10, 2008 - Jan 4, 2009
Support Geo Pilot Repair and
Maintenance
Halliburton Energy
Services
Jakarta Aug 20 – 18 Sep,2009
Support Geo Pilot Repair and
Maintenance
Halliburton Energy
Services
Singapore Nov 10, 2008 - Jan 4, 2009
7. Page 7 of 9
SSKKIILLLLss
Interpersonal
Honest, Fast learner, Highly motivated, Dynamic, Team player.
Strong communication, organizing, troubleshooting, and multi-tasking skills, especially when under pressure
and in demanding conditions
Positive attitude, with a high degree of self-discipline and self-motivation, work well with others, can work
independently
Thorough knowledge of Rotary steerable GeoPilot products and services
Mechanically inclined
Thorough technical knowledge of Drilling service line products and services
Excellent communication, organization, troubleshooting, and teamwork skills.
Computer
Geo-Pilot INSITE, MS Office (Ms Excel, Ms Word, MS Power point, Ms Visio, Ms Access), and other MS
Windows based application, SAP
Language
English : Good / Active
Indonesian Language : Mother tongue.
RReeffeerreenncceess
Jim Inglis
Email : James.Inglis@halliburton.com
Position : R&M Manager Sperry Drilling Services Labuan, Malaysia
Relation : Direct Manager
Brian Clark
Email : Brian.Clark@halliburton.com
Position : R&M Manager Sperry Drilling Services Asia Pacific
Relation : Regional Manager
Pulung Setiyawan
Email : pulung.setiyawan@thhill.com
Position : Customer Representative Quality Assurance & Control
8. Page 8 of 9
Juniwan Sihotang
Email : juniwan.sihotang@thhill.com
Position : Customer Representative Quality Assurance & Control
Riza Pahlevi
Email : riza.pahlevi@thhill.com
Position : Customer Representative Quality Assurance & Control
Jimmy Yulianto
Email : Jimmy.yulianto@thhill.com
Position : Customer Representative Quality Assurance & Control
I declare the details are stated to be true and complete.
Balikpapan, 1st April 2016
AA Ngurah Ari Suryawan Kencana