Introduction to IEEE STANDARDS and its different types.pptx
mini project-2.PPTX
1. 1
KLE Dr. M. S. Sheshgiri College of
Engineering and Technology, Belagavi
Department of Mechanical Engineering
Mini Project Phase – I
Internal Evaluation
LANDMINE DETECTION USING ROBOT
Under the Guidance of
SATISH L HULAMANI
Project Batch
1. Gajanan Hegade - 2KL19ME023
2. Mallesh Hotti - 2KL19ME036
3. Naveen Ullegaddi - 2KL19ME044
4. Niranjan Kotagi - 2KL19ME048
2. Content
• Problem Definition
• Introduction
• Working Principle
• Methodology followed during work (Flow chart)
• Work done so far
• Outcome of project work
• References
2
3. 3
Problem Definition
• Landmines are considered to be very deadly
and destroy weapons in warfare. These land
mines are treated to the civilians after the war
ended.
• Landmines detection is most crucial during
warfare and even after the war.
• These landmines detection robots can play a
huge role to spot the landmines in war areas by
lowering the risk of losing a human life.
4. 4
Introduction
• Robots are very important. Nowadays, they are used to
operating on uneven surfaces. The rocker-bogie mechanism
enables a six-wheeled vehicle to keep all six wheels in
contact with a surface even when driving in severely uneven
environments.
• There are two advantages to this rocker bogie. The first one
is that the pressure of the wheel on the ground will be
balanced. The second one is that while traveling over
uneven surfaces, all six wheels will remain in contact with
the surface.
• Metal detector sensors are mainly used to detect metals that
are inside the objects or metal objects which are under the
ground or on the ground. It is used which helps in finding
out the landmine in a more accurate and efficient way.
5. 5
Working Principle
• Movement of the robot
For easy movement of the robot we are using the rocker-bogie mechanism
which will help the robot to move on rocky surfaces.
We are using the “Radio Frequency Remote Controller”, which is a programmed
circuit that has the preprogrammed codes to move the left and right sides of the
motor accordingly and also individually.
• Sensing the landmine
To sense the landmine we are using a metal detector sensor which will be
onboard on a robot connected to a microcontroller which will send a signal to the
buzzer which will intern make a buzzing sound and alert the person.
6. 6
Methodology followed duringproject work
Construction
Connecting RF remote control
to the wheels
Installing metal detector
sensor and buzzer on the
robot
Operating
7. 7
• Construction
Building a six-wheeled robot considering a rocker-bogie mechanism so that the
robot can operate efficiently even on a rocky surface.
• Connecting RF Remote controller to the wheel
Radio frequency remote controller is a programmed circuit to control the DC
motors so the wheel of the robot that is DC motors need to be connected to the
RF remote controller module.
• Installing a metal detecting sensor and buzzer on the robot
Metal detector sensor needs to be installed on a robot so that it can detect a
landmine. This sensor needs to be connected with a microcontroller to receive
and send signals from the sensor to the buzzer which will activate the buzzer and
alert the person.
• Operating
We can easily operate the robot with the help of an RF remote controller which is
basically designed/programmed to control the robot.
Methodology followed during project work
8. 8
Work done so far
• Collection of required data to build this project
like:-
How to build a rocker bogie mechanism
How metal sensors works
9. Outcome of project work
9
As per the research, it is found that
the rocker-bogie system reduces the motion by half compared
to other suspension systems because each of the bogie's six
wheels has an independent mechanism for motion and in
which the two front and two rear wheels have individual
steering systems which allow the vehicle to turn in. A metal
detector sensor detects the metals hidden within the objects.
10. 10
References
• ROCKER BOGIE DESIGN
• https://www.researchgate.net/publication/313403109_Design_of_Rocker
_Bo gie_Mechanism6
• METAL DETECTORS
• https://www.researchgate.net/publication/313403109_Design_of_Rocker
_Bo gie_Mechanism6
• P. Panigrahi, A. Barik, Rajneesh R. & R. K. Sahu, “Introduction of
Mechanical Gear Type Steering Mechanism to Rocker Bogie”, Imperial
Journal of Interdisciplinary Research (IJIR)
• Jaradat M A, Bani Salim M N and Awad F H (2012), “Autonomous
Navigation Robot for Landmine Detection Applications”, 8th International
Symposium on Mechatronics and its Applications (ISMA), April, pp. 1-5