For General Offices, Call Centers, Computer Rooms, etc ...
Panel Core: Wood, Calcium Sulphate, Cementations
Composite. Pedestals are adjustable 10 to 100 CM.
Calcium Sulfate Core
•Adjustment from 10 to over 100 cm
Important criteria when choosing an access
floor system are:
Load bearing capacities
Architectural joints covers for:
Interior and Exterior Walls.
Ceilings and Roofs.
Components are made up from extruded
aluminum, synthetic rubber, stainless steel, or brass.
Allow the normal expansion
and contraction of the structure.
Support the structure’s physical
imposed and transient loadings.
Form a seal against the ingress of
aggressive media such as: water,
chemicals, biological matter.
Resist the wearing forces of impact,
abrasion and corrosion associated with traffic.
For floors (for installation
For covering joints in ceilings, walls
and facades - surface fixing
For precast construction and fair
faced in-situ concrete
(synthetic rubber profile)
Example for Installation Instructions
Protect, beautify and preserve
your interior wall system from
Handrails : Sculpted, Flat and Cylindrical Profiles
Wall Guards : Flat and Sculpted
Chair Rub Rails
Corner Guards : Flush and Surface-Mounted
Vinyl Doors and Frame Guards
Material: Vinyl, aluminum, wood, clear lexan and stainless steel
Hand Rails Material:
VINYL Extruded According to
ASTM D-256-91 & ASTM E-84-81A for flammability & flame spread.
ANSI –A117.1 for pullout & point load
ASTM – 256-906/93A & 93A-00 for impact resistance
ASTM D-543-87 for chemical & stain resistance
Aluminum alloy 6063
Manufactured in accordance with FS-QQ-A-200 9/D