Introduction to IEEE STANDARDS and its different types.pptx
CAD/BIM Modeler
1. Curriculum Vitae – Moheb G. Ragheb | Mohebguirguis1@gmail.com |
Moheb Guirguis
Resume
2. Curriculum Vitae – Moheb G. Ragheb | Mohebguirguis1@gmail.com |
Moheb Guirguis Ragheb
Personal data:
Nationality: Egyptian
Date of Birth: 21-03-1981
Military Status: Exempted
Marital Status: Married
Languages: Arabic, English
Education: Bachelor Degree in Computer science
Advanced Studies Academy, Cairo - Egypt, 2005
Moheb is a senior drafts man with 13 years of experience in bridges, tunnels, culverts and special structures. Moheb has
an artistic approach in transforming 2D drawings into vivid 3D (simulates reality) that convey the detailing and
architectural and structural features of the structure. He is always involved in assisting bidding managers in presenting
the bids and proposals in the best way possible. Moheb keeps track with latest available programs and technologies to
improve the quality of the output for the projects he is involved in.
Skills:
Studying and Discussing projects with the engineers and determining the detailed specifications of the model
Determining the scope of the design and choosing the initial parameters accordingly
Dividing the whole design in sufficient number of subparts and designing each subpart independently
Consulting with the engineers during the design phase and using their feedbacks for modification of the design
Preparing detailed technical content describing the in and out of the draft
Submitting the finalized design to the concerned senior officials
Guiding the subordinates regarding efficient and effective drafting techniques
Preparing design drawings and shop drawings for different structural elements including bridges (Several types), culverts,
tunnels, buildings, and chambers
Employment:
February 2015 – Present
AECOM - Middle East, United Arab Emirates
Senior CAD draftsman / BIM Modeller
Key Projects:
Mussafah Industrial Region Road Network Improvement – Abu Dhabi, UAE
As part of Emirate of Abu Dhabi work to improve the infrastructure condition of the existing roads, AECOM was awarded a project
to design 5 interchanges to improve the traffic conditions in the Emirate.
Moheb was responsible for preparing the detail design drawings (as part of team), and create some 3D sketches to clarify and study
with road utilities.
R1048 EXPO Road Improvement – Dubai, UAE
As part of Emirate of Dubai preparation to host EXPO 2020, AECOM was awarded a contract to design the surrounding 6
interchanges of the EXPO site.
Moheb was responsible for preparing the detail design drawings (as part of team),
Inner Doha Re-Sewage Implementation Strategy (IDRIS)- Doha, Qatar
(+971) 552567741
mohebguirguis1@gmail.com
3. Curriculum Vitae – Moheb G. Ragheb | Mohebguirguis1@gmail.com |
IDRIS project was developed to convert the foul-sewer drainage in the Doha South Catchment from a pumped network to a gravity
sewer network. AECOM- Abu Dhabi was involved in designing the vertical shafts and chambers where the shafts varied from 30-
70m in depth.
Moheb was responsible for delivering the preliminary and detailed design packages of the vertical precast shafts and underground
chambers. The chambers had different shapes and hydraulic purposes that needed special structural detailing. Moheb also create
Models for all shafts and families to all elements, export analytical models for structural shafts which designer engineer used in
design analyses. Moheb guide drafters team to submitting all the models and sheets in Revit. IDRIS project has been awarded
through AECOM Deliver to win program scheme due to the strong project performance.
Airport Interchange, Abu Dhabi, UAE
Moheb was responsible for detailing drawings and 3D detailing elements when required.
Abu Dhabi-UAE, Al Ain Pedestrian Bridges - concept design
Improvement of pedestrian movement in al Ain region Moheb was responsible for create tender drawings for 3 pedestrian bridges
and show up 3D views for bridges to submit with tender package
NORTH MANAMA CAUSEWAY PHASE 2 – detail design stage
Moheb used Revit to create a proposed signature bridge in the Kingdom of Bahrain that includes a pylon, stays, deck and
substructure elements. The piers of the signature bridge had a unique voided V shape. Revit was used to detail the stays
connections, longitudinal internal and external deck prestressing cables, and to check for clashes. Revit was also used to detail the
reinforcement of the bridge deck, piers, and to create different cross sections along the bridge length.
RED SEA MARINE CROSSING - concept design
Crossing rea sea bridges types Cable stayed and suspended bridges for 10 options with flooding foundations in view options
depend on sea bed depth which is going to 1.5Km total long of bridges around 14km connecting Africa with Asia between Egypt
and KSA
Emaar Pedestrian Bridge – detail design stage
Located in a very critical location in Dubai Downtown. It had 3 spans and consisted a total length of 93m. Many utilities and roads
were crossing underneath the bridge. It was connected to a building (Burj Vista) at one end and existing pedestrian bridge at
another end. Moheb was responsible for preparing the detail design drawings.
UMM LAFINA Causeway - concept design stage.
The causeway intended to create a new link between Abu Dhabi Island and newly developed Al Reem Island. The cause way
consisted of two parallel bridges spanning over 50m.
June 2006 – February 2015 (10 Years)
Dar Al-Handasah Consultants (Shair and Partners)
Bridges & Special Structure Draftsman
- Green Line Underground Stations - Qatar Rail (Revit modeling) [year 2013]
- MATAF EXTENSION (prestressing beams) – SAUDI ARABIA [year 2012]
- Bahrain Airport (PARK EXTENTION) - BAHRAIN [year 2012]
- GAULAN TOWERS (Workshop drawings) KURDISTAN – IRAQ [year 2011]
- Maintenance of 6.5 Ring Road (INTERCHANGES) - KUWAIT [year 2011]
- JAZAN INTERCHANGES – SAUDI ARABIA [year 2010]
- King Abdullah University Of Science & Technology
(ENTRY WORKS & VISITORS' CENTER BUILDING GOVERNMENT CHECK POINT - SAUDI ARABIA
[year 2008]
- Jabal Omar Development project in Makkah Al Mukarramah special structures:
OVERPASSES (1, 2 & 3), UNDERPASSES (1, 2 & 3) and STORMWATER TANK SAUDI ARABIA [year 2008]
- Princess Nora Bint Abdulrahman University Building 2.1, 2.2, 2.3 & 2.4 - SAUDI ARABIA [year 2008]
- Underpass - Angola [year 2007]
- PRINCE ABDEL MOHSEN BIN ABDEL AZIZ CROSSING BRIDGE - Saudi Arabia [year 2006]
- AL KHARJ TO RIYADA-DAMMAM EXPRESSWAY LINK - Saudi Arabia (Int.-6, Int.-7 (Bridge1, Bridge2, Bridge3), Detailing General
arrangement for piles, foundations of piers and abutments, substructure (piers, abutments, retaining walls), superstructure
(precast beams, Crossheads, Buffers, Plinths, Deck slab, Barrier) [year 2006]
- Detailed reinforcement for piles, foundations of piers and abutments, substructure elements (piers, abutments, retaining walls),
superstructure elements (Crossheads, Buffers, Plinths, Deck slab, Fascia, Barrier), precast beams & box girder deck – Algeria
[year 2006]
4. Curriculum Vitae – Moheb G. Ragheb | Mohebguirguis1@gmail.com |
Trainings & Certificates:
Autodesk Revit - course organized by Dar Al-Handasah
Autodesk AutoCAD - course organized by Dar Al-Handasah
CADS RC 9.02 - course organized by Dar Al-Handasah
Microsoft visual basic - course organized by Cairo university
Microsoft office (Word-Excel-PowerPoint-Outlook) - course organized by Dar Al-Handasah
Computer Skills:
Windows operating system
Adobe Photoshop
NAVISWORKS
Autodesk Revit
AutoCAD
Autodesk (3D MAX)
Adobe InDesign
CorelDraw
Micro media FreeHand (CS)
Internet searching engines
Other Skills:
Creator Artistic sense
Photographer with artistic eye Work under pressure
Collaborator Responsible
3D VISUALIZATION VIEW – Pedestrian Bridge – created and Render from Revit
5. Curriculum Vitae – Moheb G. Ragheb | Mohebguirguis1@gmail.com |
3D MODEL SHOWING CROSS SECTION FOR TUNNEL
3D VISUALIZATION VIEW – Cable stays Bridge – created by Revit - Render by Lumion
6. Curriculum Vitae – Moheb G. Ragheb | Mohebguirguis1@gmail.com |
3D VISUALIZATION VIEW – Suspended Bridge – created by Revit – Render by Lumion
3D Modelling for shafts
3D REINFORCEMENT STRUCTURAL chamber
In Revit you can model regular reinforcement and wire
fabric reinforcement. There are a number of
categories assigned for these reinforcement types,
and they all behave and interconnect differently
7. Curriculum Vitae – Moheb G. Ragheb | Mohebguirguis1@gmail.com |
3D VIEWS FOR I GURDER BRIDGE
3D VISUALIZATION VIEW – Pedestrian Bridge
8. Curriculum Vitae – Moheb G. Ragheb | Mohebguirguis1@gmail.com |
3D VISUALIZATION VIEW TO SHOW TRUSS SESTYM – CREATED AND RENDER FROM REVIT
3D VIEW SKITCH TO SHOW UTILITIES IN SECTION
3D CONCRETE PIERS AND DECK SECTIONS
9. Curriculum Vitae – Moheb G. Ragheb | Mohebguirguis1@gmail.com |
3D ARCH PEDESTERIAN BRIDGE
3D DETAIL SHOWN PYLON WITH CONNICTIONS
Used Revit to create Pylon, stays and connections
elements to check clashes