The AM437x Application Board is a four layer Add-on Module for the AM437x PoM from Mistral built for the ARM-Cortex A9 Sitara AM437x SoC fromTexas Instruments.
1. D A T A S H E E T
AM437x Application Board
AM437x Application Board is a four layer Add-on Module for AM437x PoM from Mistral built for the ARM-Cortex A9 Sitara AM437x SoC from
Texas Instruments. The AM437x Application Board interfaces with PoM through its expansion connectors and provides general purpose 7” LCD
withcapacitivetouchscreenalongwithkeypadandsensorslikeAmbientlight(ALS),Temperature,Accelerometer.
The AM437x Application Board supports Industrial interfaces such as RS485, CAN/Profibus, Ether CAT, Dual motor control, Endat/eQEP encoders
and ADC for motor current sensing. It also supports ZigBee communication using TI’s CC2530 ZigBee module interfaced externally via its
expansionconnectors.
The AM437x Application Board provides flexible powering options for both Industrial/Home Applications as well as other general purpose
interfaceswhichareavailableviatheAM437xPoM.
O v e r v i e w
Features
:
:
:
:
:
:
:
:
:
:
:
:
:
Four-layer PCB with FR-4 dielectric material, thickness
of about 1.6mm
User Interface
7” LCD with Capacitive Touch Controller
LED and KEYPAD buttons
Sensors
Ambient Light Sensor, Temperature Sensor
3- axis Accelerometer
Communication
RS-485/CAN/Profibus
EtherCAT
Supports TI’s CC2530 ZigBee module via additional
Expansion Connectors
Control
Dual Motor Control
Interfaces
ADC for Motor Current Sense
EnDAT/eQEP
Board Dimension
190mm x 165mm
Temperature
Commercial Grade
Power Input
+24V DC for AM437x Application Board and AM437x PoM RevB
(when industrial interfaces are used)
+5V DC for AM437x Application Board and AM437x PoM RevB
(when other general purpose interfaces are used)
Software
Android KitKat support
The AM437x Application Board when connected with AM437x PoM
can be used for building products for Industrial Automation, Home
Automation and Biometrics.
:
:
:
Applications