The document summarizes electrical engineering projects undertaken by the individual. It describes their involvement in producing specifications and managing material takeoffs for an ANPlant project in Bontang, performing a preliminary cost estimate for a petrochemical complex, and providing technical support and overseeing testing for a project expanding a refinery's DHTU unit. It also lists responsibilities for other projects including developing requisitions and cable schedules, performing calculations for lighting protection and cable sizing, compiling hazardous area documents, and checking cable routing designs.

1. Projects Undertaken
ORICA Bontang ANPlant (FEED &EPCM)
 Produced specifications, datasheets for LV motors, UPS,24Vdc Supplies and VSD
Units
 Generated the Material Take Off for bulk electrical gear and cables
 Managed and updated the electrical consumer list
 Reviewed vendor data
CUVENPEQ Petrochemical Complex (Estimate)
 Performed a preliminary cost estimate
 Development of single line diagrams for proposed distribution using AutoCAD
Caltex Lynton – DHTU-2 Project (SITE)
 Prepared handover packages following completion of construction work
 Punch listing of outstanding work
 Supervised ABB during testing of new motor control units for new and existing
switchboards
 Managed electrical work in the lime ponds area
 Provided technical design support to contractors
 Advised contractors and the principle on constructability issues
 Monitoring of construction progress by E&I contractors
 Performing OH&S inspections
 Provided assistance in the commissioning of E&I equipment
Shell Clyde - 10ppm Sulphur Diesel Project (Detailed Design)
 Development and checking of requisitions
 Compiled requisitions into purchasing database (VPRM)
 Prepared lighting protection calculation
 LV cable calculations
 EX e power dissipation calculation
 Compiling hazardous area dossier
 Technical bid evaluations
 Developed data sheet for hazardous and non-hazardous equipment
Ningxia Coal Based Propylene Project (FEED)
 Developed load analysis to include all electrical drives
 Developed cable schedule, including node list to estimate cable ladder fill
 Detailed checking of 2D & 3D cable ladder routing produced by electrical designers
TRUenergy – LOPS (FEED)
 Developed cable schedule
 LV & HV cable sizing calculations