Mechanical Engineer - MEP Estimator in Tender/Estimation Department.

1. ENGR. MICHAEL E. CRUZ
Mobile No. 055-515-2778
E-mail Add: mikecruz1974@yahoo.com
POSITION APPLIED FOR: M.E.P. ENGINEER
OBJECTIVE: To manifest and enhance my knowledge, potential and versatility as a
Mechanical Engineer. To contribute and participate to the Industry’s
continuous progress and future growth through my mechanical
expertise.
EDUCATION: Bachelor of Science in Mechanical Engineering
Central Luzon Polytechnic College
Cabanatuan City, Nueva Ecija, Philippines
1991 – 1996
WORK EXPERIENCE:
Company: Fibrex Construction Group LLC
P.O. Box 462, Musaffah Industrial Area, Abu Dhabi, UAE
Position: MEP Estimator (Tender/Estimation Department)
November 15, 2014 - Present
Since 1972, Fibrex Construction Group has evolved into one of the major turnkey
construction groups in the region handling projects in the Gulf and across the Middle
East of various categories ranging from residential, commercial, leisure, private,
governmental and educational categories. Its 12,000 experienced personnel are
backed up by a fleet costing over AED 250 million in heavy machinery and
equipment that will make sure all your construction needs to build your future projects
are secured.
Duties and Responsibilities:
 Estimate/Take Quantity of Mechanical Services specifically in HVAC, WATER
SUPPLY, DRAINAGE, FIRE FIGHTING and LPG System.

2.  Estimate/Take Quantity of Electrical Services specifically in Power-Cable,
Power-Socket, Lightning Protection System, Lighting System and Extra-Low
Voltage System.
 Analyzes and reviews scope of work of Tender Project.
 Prepare clarifications/queries to consultant or client regarding tender project.
 Prepare Request for Proposal (RFP) for M.E.P. Contractors.
 Identify all equipments/material type used for tender projects.
 Interpret and follow company tendering processes and procedures to ensure
that all aspects of tenders are met.
 Performed other duties that were assigned from time to time.
Involved in Successful Tendered Projects:
 Shams Meera Residential Apartments
Project Description: 3 Basement + Ground Floor + Twin Tower (26th
Floor)
Project Cost: 258 Million (Civil & MEP)
 Khalifa University Extension Phase 1
Project Description: Construction of 5 School Buildings (G + 5th
+ Roof)
Project Cost: 569 Million (Civil & MEP)
Company: Arabian International Company (AIC)
P.O. Box 66862, Business Bay, Dubai, UAE
Position: MEP Estimator (Tender/Estimation Department)
August 10, 2014 – October 23, 2014
Arabian International Company for Steel Structures (AIC) is a leading designer,
fabricator and erector of structural steel and towers and is a member of the Attieh
Group of companies. The Attieh Steel Group is the largest steel stockiest in the
Middle East.
Duties and Responsibilities:
 Estimate/Take Quantity of Mechanical Services specifically in HVAC, WATER
SUPPLY, DRAINAGE, FIRE FIGHTING and LPG System.
 Estimate/Take Quantity of Electrical Services specifically in Power-Cable,
Power-Socket, Lightning Protection System, Lighting System and Extra-Low
Voltage System.
 Analyzes and reviews scope of work of Tender Project.
 Prepare clarifications/queries to consultant or client regarding tender project.
 Prepare Request for Proposal (RFP) for M.E.P. Contractors.
 Identify all equipments/material type used for tender projects.
 Interpret and follow company tendering processes and procedures to ensure
that all aspects of tenders are met.
 Performed other duties that were assigned from time to time.

3. Company: Al Jaber Group
P. O. Box 2175, Abu Dhabi, UAE
Position: Mechanical Engineer (Tender/ Estimation Department)
April 11, 2012 – July 25, 2014
Al Jaber Group (AJC), established in 1970, is a privately owned multi-faceted group
of companies, based in Abu Dhabi. AJC provides its professional services in the
sectors of Construction, Heavy Lifting & Logistics, Industrial and Trading. Al Jaber
Group demonstrates outstanding capabilities through utilizing varied divisions and
resources within the Group to support and complement each other.
Duties and Responsibilities:
 Estimate/Take Quantity of Mechanical Services specifically in HVAC, WATER
SUPPLY, DRAINAGE, FIRE FIGHTING and LPG System.
 Estimate/Take Quantity of Electrical Services specifically in Power-Cable,
Power-Socket, Lightning Protection System, Lighting System and Extra-Low
Voltage System.
 Analyzes and reviews scope of work of Tender Project.
 Prepare clarifications/queries to consultant or client regarding tender project.
 Prepare Request for Proposal (RFP) for M.E.P. Contractors.
 Identify all equipments/material type used for tender projects.
 Review/Checked B.O.Q. against system drawings.
 Checked/Analyzed if there is a case of revisions/addendum for tender project.
 Prepare Request for Quotation (RFQ) in M.E.P. Suppliers.
 Verify quotations in M.E.P. suppliers if this is in accordance with the technical
specifications.
 Interpret and follow company tendering processes and procedures to ensure
that all aspects of tenders are met.
 Performed other duties that were assigned from time to time.
Involved in Successful Tendered Projects:
 Saadiyat Beach Villa Phase 2
Project Description: Construction of 77 Villas
Project Cost: 252 Million (Civil & MEP)
 ENEC Guest House & Visitor Center
Project Description: Construction of Main Building A, Hotel Wings B, C, D, &
E and Ancillary Buildings
Project Cost: 190 Million (Civil & MEP)
 HIDD AL SAADIYAT VILLAS
Project Description: Compose of 462 Luxury Villa, 2 Community Center & 1
Mosque
Project Cost: 1.8 Billion (Civil & MEP)
 ADNOC – PETROLEUM INSTITUTE & RESEARCH CENTER
Project Description: Laboratory & School Building (1 Basement + GF + 3
Floors + Roof)
Project Cost: AED 185 Million (Civil & MEP)

4. Company: Thermo L.L.C. (MEP Contracting)
P.O. Box 46508, Abu Dhabi, UAE
Position: Mechanical Engineer (Estimation Department)
April 8, 2008 – March 31, 2012
Thermo LLC is a reputable company which has been committed in delivering quality
engineering with professionalism and reliability particularly in the field of Mechanical,
Electrical and Plumbing since 1976. The company offers comprehensive services as
a single and multi-service Engineering Contractor for both small and large projects
such as Towers, Hotels, Schools, Hospitals, Residential/Commercial or special
projects like Data Center, District Cooling and Laboratories.
Duties and Responsibilities:
 Estimate/Take Quantity of Mechanical Services specifically in Heating
Ventilating & Air Conditioning System, Water Supply System, Drainage
System and Fire Fighting System for High Rise Towers, Office Buildings,
Hotel and Resorts, Housing and Villas, Educational Facilities, Mixed Use
Developments and Healthcare Facilities.
 Estimate/Take Quantity of Electrical Services specifically in Extra Low
Voltage System, Lighting System, Power Sockets and Lightning Protection for
High Rise Towers, Office Buildings, Hotel and Resorts, Housing and Villas,
Educational Facilities, Mixed Use Developments and Healthcare Facilities.
 Analyzes and reviews tender documents issued by the Consultant for the
preparation and submission of bid to the company’s prospective client.
 Reviews and analyzes old drawings if there is a case of some revisions or
addendum drawings.
 Prepares tender documentation queries to consultants / clients to confirm and
collect any missing data and drawings.
 Coordinate and undertake the interpretation and review of system drawings to
identify any difference in tender requirements and raise queries against
specifications.
 Reviews Bill of Quantity against system drawings.
 Identify material types and quantities, then prepare equipment list for cost
estimation.
 Area calculation of the approved tender project.
 Make quotations from different suppliers and check/review if the materials
are in accordance with the technical specifications.
 Interpret and follow company tendering processes and procedures to ensure
that all aspects of tenders are met.
 Performed other duties that were assigned from time to time.
Involved in Successful Tendered Projects:
 Bridgeway Mixed Used Development
Project Description: 2 Level Basement Parking + GF + MZ + 9 Level Hotel &
10 Level Apartment Building.
Project Cost: AED 177.5 Million
 Shams Gate District Towers 3 to 8
Project Description: 3 Level Basement Carpark + 6 Level Podium + 4
Residential Towers, 1 Hotel Tower & 1 Office Tower.
Project Cost: AED 1.35 Billion

5.  Beach Tower at Plot S5 – C13 Shams, Abu Dhabi
Project Description: 1 Basement + 3 Level Carpark + 2 Residential Tower
Project Cost: AED 98 Million
 ADISC – Residential Leisure & Commercial Compound – Villas
Project Description: Consist of 385 Nos. of Villas
Project Cost: AED 183.75 Million
 Central Market – Redevelopment Retail Podium & Basement Carparks
Project Description: 5 Level Basement Carpark + 7 Level Retail Area
Project Cost: AED 270 Million
 Abu Dhabi Future School Program – Package 5
Project Description: 4 Schools in Different Location in Al Ain, U.A.E.
Project Cost: AED 125 Million
 Masdar Institute of Science and Technology (MIST 1B)
Project Description: (Undercroft + Low/High Level Podium + Level 1 to 4)
Laboratory & Accommodation Building
Project Cost: AED 205 Million
 Masdar Institute of Science and Technology (MIST 1C)
Project Description: Shell & Core Office Building
Project Cost: AED 30 Million
 Shah Gas Development Package 2 & 3
Project Description: Substation and Shelter House
Project Cost: AED 33 Million
 Shah Gas Development Package 10 Non Process Building
Project Description: 19 Nos. Facility Buildings + External Works
Project Cost: AED 136 Million
Company: National Irrigation Administration
CLSU Compound, Muñoz, Nueva Ecija, Philippines
Position: Engineering Assistant A
January 12, 1998 – July 31, 2006
Duties and Responsibilities:
Warehouse Department/Store Keeper Department
 Supervised the warehouse for overall operations.
 Received spare parts as per purchase order and specifications.
 Conducted weekly, monthly and yearly inventory.
 Prepared daily, weekly and monthly report.
 Monitor all the status of the spare parts.
Repair and Maintenance Section:
 Perform Preventive Maintenance Schedule for every light and heavy
equipment
 Supervised all personnel while performing mechanical works.

6.  Monitored all incoming and outgoing mechanical parts in the shop.
 Prepared daily, weekly and monthly report.
 Monitored section’s operational status.
 Performed other duties that were assigned from time to time
Monitoring and Evaluation Section:
 Supervised all operators and drivers in field operation.
 Monitored deployment of different types of light and heavy equipment.
 Prepared trip tickets and daily equipment reports.
 Performed other duties that were assigned from time to time.
Company: Plastic City Corporation
Valenzuela, Metro Manila, Philippines
Position: Cadet Engineer / Quality Control Engineer
May 7, 1997 – December 9, 1997
Duties and Responsibilities:
 Supervised all operators in their designated machine.
 Performed quality inspection in each product.
 Prepared daily, weekly and monthly report.
 Performed other duties that were assigned from time to time.
Company: Meralco Industrial Engineering Services Corporation
Morong, Bataan, Philippines
Position: Engineer Trainee
April 15, 1996 – April 15, 1997
Duties and Responsibilities:
 Maintained plant safety.
 Monitored the efficiency of a motor generator.
 Routine checked-up of plant operation.
 Monitored voltmeter and wattmeter readings.
 Reported breakdown amperage deficiency noted during operation.
 Performed other duties that were assigned from time to time.
SEMINARS AND TRAININGS ATTENTED:
Reconstructive Maintenance Welding
June 11, 2002
Conducted by: CRO-MAGNON CORP.

7. Auto Electricity
June 15 – November 10, 1999
Conducted by: P.M.T.C., Cabanatuan City
Auto Engine Mechanic
April 12 – June 14, 1999
Conducted by: P.M.T.C., Cabanatuan City
Lubrication Seminar
March 25, 1999
Conducted by: Continental Oil Company of Houston, Texas
SPECIAL SKILLS:
 Computer Literate – MS Office (MS WORD and EXCEL)
 Familiar in AutoCAD Software
 Familiar in PlanSwift Professional Viewer Software
 Good Typing Ability
 Having U.A.E. Driving License
PERSONAL INFORMATION:
Date of Birth : April 29, 1974
Place of Birth : Cabanatuan City, Nueva Ecija, Philippines
Civil Status : Married
Citizenship : Filipino
Languages Spoken : Filipino and English
Religion : Roman Catholic
Height : 5’10”
I hereby certify that the above information are true and correct to the best of my
knowledge and belief.
ENGR. MICHAEL E. CRUZ
Applicant