Sr. Mechanical Engineer +10 yrs - LEED Green Associate - Project Engineer - MEP Coordinator - Construction Tech, Support - Mechanical Design Engineer

1. AYMAN ABDALLAH
Senior Mechanical Engineer, MEP, LEED Green Associate
Sheet 1 of 7
Name: Ayman Fathy Mohamed Abdallah
Profession: Mechanical Engineer
Nationality: Egyptian
DOB: 3rd
September 1985
Status: Married (Two Children)
Work Language: Arabic & English
Location: Etihad Road – Dubai
UAE Mob: 00971529894005
Email: ayman0082@gmail.com
Professional Summary:
- Senior Mechanical Engineer, Design base, Coordination, Site and Construction Support and BIM
coordination as well
- Certified LEED Green Associate from United States Green Building Council.
- Over 10 years of experience In Egypt, Qatar, KSA and UAE
- Have work experience in large consultant firm (ECG), International Engineering and
Construction Corporation (Bechtel Corporation), and Management Corporation (Morganti
Corporation)
- Having Comprehensive Design knowledge in all mechanical systems (Plumbing, Fire
Protection and HVAC) based on Integrative and iterative process and promoting system
thinking
- Experienced on a variety of design and construction project and master plan development in
MEP discipline, which includes; High Rise Buildings, Airports, Mixed Use, Commercial,
Residential , Hotels, Industrial Facilities, Hospitals, Military Facilities, and Railways
- Having a proven ability to improve the work efficiency by finding solutions to the complex
projects problems all too tight work schedules
- Strong knowledge of International Engineering Standards, Codes, Practices and Guidelines
Such As (NFPA, , UPC, IBC, IPC, NPC, API, IPCIBSE, ASPE, ASME, ANSI, ASHREA, etc)
Education and Courses:
- Bachelor of Mechanical Engineering degree from HELWAN University, 2007
- Certified LEED Green Associate from U.S. Green Building Council.
- NFPA Training & Professional Development course in Standard for the Installation of Stationary
Pumps for Fire Protection
Membership of Professional Organizations:
1. Egyptian Council of Engineers ID# 11/5305429/2007/2
2. Dubai Society of Engineering ID# 39931
3. U.S. Green Building Council / LEED Green Associate from (ID# 0011157819)

2. AYMAN ABDALLAH
Senior Mechanical Engineer, MEP, LEED Green Associate
Sheet 2 of 7
Employment History
 December 2016 – Present
Employer: Morganti International Corporation
Country : DUBAI-UAE
Position : Mechanical Project Engineer (MEP) / Client Representative
Involved as a Mechanical Project Engineer, and MEP coordinator participating in challenged
Government projects with MOPA (Ministry of Presidential Affairs) and MOE (Ministry of
Education)
1. Project Name: Major Renovation and Constructions of MOE 300 schools in UAE
About project:
The Ministry of Education (MOE) has decided to undertake a comprehensive major renovation of
its schools in all the Emirates, about 300 schools, and the Ministry of President Affair (MOPA) is
the main financier of the project. The project team plays an important role as a representative of
the Ministry of Presidential Affairs (MOPA) in the management of the project stream line and to
ensure the construction work meet the international buildings standard, local codes and
regulation.
- Package Value: 220,000,000 DHS
- Main Contractor: Ramada General Contractor & Jumaa Al Majid General Contractor
Responsibilities;
- Acting as Mechanical Project Engineer, and MEP coordinator monitor to coordinate and
supervise the Mechanical and Electrical site activities and Contractor/sub-contractors on a day-
to-day basis to ensure that project goals are achieved within time frame.
- Raise technical query for any conflict information within the project technical document
- Prepare comparison report between Owner Project Report (OPR) and Tender Documents in
terms of materials quantities, specification and scope of work to the project management.
- Prepare value engineering if required by authorized authorities
- Assist the project manager in advising on construction methodologies in coordination with other
disciplines/contractors/ subcontractors prior to construction
- Assist the project manager in supervising the construction in terms of proper method, material
reservation.
- Synergy with planning department to define project activities within the scope of work
- Review the technical submittal of materials and ensure its compliance with project specifications
- Supervise preparation of full detailed shop drawings required to execute the project
- Obtaining of drawings and materials approvals
- Follow up of progress planning and arranging all requirements
- Monitoring of Contractor/Subcontractor’s performance
- Analyzing and resolving field problems.
- Reporting to the project management

3. AYMAN ABDALLAH
Senior Mechanical Engineer, MEP, LEED Green Associate
Sheet 3 of 7
 February 2015 – December 2016
Employer: International Bechtel Corporation Ltd
Country : KSA, Oman, DUBAI-UAE
Position : Senior Mechanical Engineer (MEP)
Involved as a senior design engineer, MEP coordinator, BIM coordinator, site and construction
support on the mega challenges projects
2. Project Name: Riyadh Metro Project (RMP) – (LEED Gold Certified)
About project:
Riyadh Metro Project (RMP), The RMP comprises of three depots (East, South and North) and
each depot includes number of buildings ranging from Administration, Workshops, vehicle wash,
stabling, permanent way, traction power, chilled water and main fire/potable pump station
building in addition to the metro stations for the 3 lines.
- Contract Package Value: $10 billion
- Main Contractor: BACS consortium, includes Bechtel Corporation, Almabani General
Contractors, Consolidated Contractors Company, and Siemens
- Project Reference Link: http://www.bechtel.com/projects/riyadh-metro
3. Project Name: Muscat airport, Oman
About project:
Muscat Airport, Oman, designing and building a new terminal and associated facilities at Muscat
International Airport, the 29-gate passenger terminal building, which features the latest state-of-
the-art technology, will accommodate 12 million passengers annually
- Main Contractors : Bechtel Corporation
- Project Reference Link: http://www.bechtel.com/projects/oman-airport-expansion-muscat/
Responsibilities;
- Acting as Design Engineer for Producing, Check and Review of the design and construction
documentation and drawings (design criteria, conceptual design, schematic design, detail
design, shop drawings, specifications, bills of quantities, cost estimate, method of measurement,
technical reports, study the technical data sheets) for the mechanical systems
- Acting as project engineer for Providing relevant support and practical advice to the
subcontractors and the field engineers
- MEP Coordinator for external services to Check and solve the clashing between the underground
MEP services, utility services and buildings connections such as (Electric duct banks, Signal
Duct banks, Electric Chambers, Storm Water Network, Sanitary Network, Potable Water
Network, Gray water/Irrigation Network, cables stub up and mechanical tie in point)
- MEP Coordinator for internal services to coordinate the MEP systems with other disciplines
systems (Such as Transit system and track lines) to avoid the rework and help the project team
to move forward
- Participate with the project team to achieve the goals of the pursuing LEED rating system in the
aspects of mechanical systems through the integrative process.
- Review/check the compatibility of design drawings with international codes and local standards
- Preparing the design criteria and technical reports
- Leading and motivating junior team members (Locally and remotely)
- Identify and prepare appropriate project solutions through system thinking, and provide source
reduction and value engineering options.
- Assisting and providing information to cad operators and BIM modeler

4. AYMAN ABDALLAH
Senior Mechanical Engineer, MEP, LEED Green Associate
Sheet 4 of 7
- Verifying that all designs, drawings and documents accordance with Bechtel policies and
manuals
- Liaising as directed with the consulting engineers, and/or Subcontractors
- Manage, preparing and solving the Request For Information’s “RFI’s” and Field Change
Requests “FCD’s”
- Review the quotations, submittals and approvals.
- Coordinate the work flow/progress with the authorities for the required approvals.
- Review client’s correspondence and preparing all required responses / justifications.
 August 2009 – January 2016
Employer: Engineering Consultant Group ECGSA,
Country : Cairo-Egypt, Doha-Qatar, Dubai-UAE
Position : Mechanical Design Engineer, Supervision (Fire Protection and Plumbing)
Involved as a Mechanical design engineer for Fire Protection and Public Health Systems, and site
supervision for mega challenged Project
Sample Of the most Important and Mega Project:
High Rise Buildings Projects
1. Project Name: Al Andalus Mixed Use Tower (31 Floors) - Jeddah, Saudi Arabia
About project:
Over a land area of 6,892 m2 and with a built-up area of 65,600 m2 mixed-use tower
The tower encompasses the following (3-floor basement: utilized for car parking and mechanical
services, ground floor and 5-floor podium: entrance, lounges, restaurants, retail space, business
centre, ballroom, gym and swimming pools, 23 typical floors: 255-room hotel, and 50 serviced
apartments and 2 penthouses)
- Scope Includes: Schematic design, detailed design, Tender documents
2. Project Name: Park Towers at DIFC (52 Floors) – Dubai, United Arab Emirates
About project:
A two-tower residential project in the heart of Dubai International Financial Center (DIFC), Park
Towers rise 49-storey high in addition to 3 storey basements and offer 432 exquisitely designed
one, two, and three bedroom apartments. It entertains a total built-up area of 150,000 m2)
- Scope Includes: Schematic design, detailed design, Tender documents, and Construction
management and supervision
3. Project Name: Executive Heights Towers (25 Floors) – Dubai, United Arab Emirates
About project:
A masterpiece of practicality and contemporary design, Executive Heights soars 25 floors high
whilst offering 360,000 ft2 of office space equipped with state-of-the-art communications and
networking technology. Moreover, Executive Heights offers stylish restaurants, cafes, a
swimming pool, a health club, and jogging track.
- Scope Includes: Mechanical Coordinator

5. AYMAN ABDALLAH
Senior Mechanical Engineer, MEP, LEED Green Associate
Sheet 5 of 7
Aviation Projects
1. Project Name: Cairo International Airport Terminal Building 3 - Egypt
About project:
The project comprises the design and construction of A three-level central main building of total
built up area 164,000 m2 to the latest technologies of security, safety and operational systems,
with fifteen swing gate facilities serving international and domestic flights including the A380 wide
body aircrafts. Automated baggage handling, screening and sorting system and ancillary
buildings including apron control tower, power plant, HVAC equipment building, electrical
substation, water reservoir and pumping stations. Halls are 320x150m, for processing all arriving,
departing passengers and basement housing facilities including stores, workshops, baggage
handling.
- Contract Package Value: $ 450 million
- Scope Includes: Schematic design, detailed design, Tender documents, and Construction
supervision
2. Project Name: Cairo International Airport Terminal Building 2 - Egypt
About project:
Cairo International Airport terminal building 2 is undergoing a major renovation effort to double its
capacity to 7.5 million passengers per year. With a built-up area of 170,000 m2 the project
comprises the renovation of the existing Terminal Building 2, the construction of new buildings
which includes a new departure hall, and a new airside pier, doubling the existing total built-up
area of TB 2.
- Scope Includes: Schematic design, detailed design, Tender documents, and Construction
management and supervision
3. Project Name: King Khalid International Airport International – Saudi Arabia
About project:
King Khaled International Airport consists of three Terminal buildings, two of them are
International and the third is Domestic. The project's scope is limited to the departure halls of the
three terminals.
- Scope Includes: Schematic design, detailed design, Tender documents.
Urban Development and Mixed-Use
1. Project Name: Madinaty - Egypt
About project:
A city of international standards, Madinaty stretches over 33.6 million m2whilst delivering an
accommodation capacity of 120,000 housing units to serve 600,000 residents. Madinaty features
an 159-acre open-air mall, villas, apartment buildings, golf retreats, healthcare facilities, hotels,
educational institutions, sports and social clubs, and entertainment destinations
- Scope Includes: Schematic design, detailed design, Tender documents, and Construction
supervision
2. Project Name: Al Andalus - Dubai, United Arab Emirates
About project:
With a total built-up area of approximately 157,000 m2, the community includes 7 residential
buildings (ranging from G + 6 to G + 11 floors), in addition to a common parking area, 75
townhouses(2, 3, or 4-bedroom unit)
- Scope Includes: Schematic design, detailed design, Tender documents, and Construction
supervision

6. AYMAN ABDALLAH
Senior Mechanical Engineer, MEP, LEED Green Associate
Sheet 6 of 7
3. Project Name: Al Ghadeer Development Phase 1 – Abu Dhabi, United Arab Emirates
About project:
ECG & SUNJIN - Engineering & Architecture have joined forces the design of a plot area of
643,246 m2 and built up area of 257,000 m2 the project house three types of 153 villas (G+1),
518 townhouse (G+1), 133 terraced apartment (G+2) and eight types of 6 apartment building
comprise basement, ground, first and 3 typical floors. The development offer community facilities
which include 2 typical club houses, swimming pools, coffee shop, retail stores, fitness and social
center and external landscape and parks.
- Contract Package Value: 870,614,000.00 DHS
- Scope Includes: Schematic design, detailed design, Tender documents
Military and Port Projects
1. Project Name: Qatar Emiri Naval Forces Base at the New Port Project – Doha, Qatar
About project:
The self-sustained naval base, which is served by a naval basin for vessels, comprises around
200 buildings with a total built-up area of over 560,000 m². It is developed as a complete,
integral, and state-of-the-art military facility encompassing all functions necessary for naval
military operations. Building types cover administrative, accommodation, recreational, training,
logistics, and maintenance facilities, with hierarchical functions that ensure the smoothness of
operations, relations, and functionality.
- Scope Includes: Schematic design, detailed design, Tender documents
Other Accomplished Projects
1. Culture village 4 star Hotel , Dubai – Marriot Operator
2. Al Barsha Hotel – Marriott Standard.
3. Etisalate Misr Administrating Building
4. Suez Oil Processing Company (SOPC), Fire Fighting/Protection Systems Development
5. Grand Egyptian Museum (GEM) - Work included detailed design of the DSM, Ticketing and
Nilometer Buildings and coordination with other disciplines by Rivet modeling.
6. General Directorate of Military Works (GDMW) Riyadh Medical Complex
7. Cairo Festival City Mall
8. East Owinat Power Plant
9. RAS GHAREB Crude Oil Field and tank farm, Fire Fighting/Protection Systems Development
Responsibilities;
- Preparing, Check and Review of the Design Stages (Preliminary Design , conceptual design,
detail design, shop drawings, construction documents, specifications, bills of quantities, cost
estimate, method of measurement, technical reports, study the technical data sheets).
- Design of Fire protection systems: includes automatic fire water sprinkler systems, pre-action
system, deluge system, fixed cooling system, automatic carbon dioxide extinguishing systems,
automatic clean agent (FM-200, INERGEN) extinguishing systems, high, medium, low expansion
foam systems, water cooling spray system, portable fire extinguishers, standpipe hydrant and
hose systems, external fire protection networks including external wet and dry fire hydrants in
addition to fire water tanks and fire pump stations
- Design of the Public Health Systems: includes cold and hot domestic water supply systems,
individual/central water heating system (Electric, Solar, Steam), waste water, soil water and
storm water drainage systems, domestic water tanks and domestic pump stations, drainage lift

7. AYMAN ABDALLAH
Senior Mechanical Engineer, MEP, LEED Green Associate
Sheet 7 of 7
stations, irrigation water tanks and irrigation pump stations, design of swimming pools, waterfalls,
water fountains (Wet and Dry) and design of lakes with mechanical equipment rooms, selection
of pumps, and monthly fuel system and preparation for all required
- Preparing of the fire philosophy, design basis reports, fire cases scenarios study, fire water
hydraulic calculations, selection of material and material requisitions (MRQ's), Cause and effects,
Fire water P&ID's, hydraulic calculations.
- Organizing and supervising the work of Junior engineers and draftsmen and providing relevant
support and/or advice to project team
- Verifying that all designs, drawings and documents are to current codes and standards and in
accordance with ECG policies and
- Preparing weekly and monthly progress reports and assessing them against the project
schedule.
For All ECG Project Reference Link: http://www.ecgsa.com/sectors
 July 2007 – July 2009
Employer: Electro Mechanical Group EMG,
Country : Cairo-Egypt
Position : Jr. Mechanical Design Engineer (Fire Protection and Plumbing)
Responsibilities include design of pluming & fire fighting engineering works, preparation of all
designs drawings and bill of quantities and specifications of the following projects:
 Amoon Hotel, Aswan, Egypt.
 Academic Marine Borden in wardan – Egypt.
 Bahteem hospital – Egypt.
 Assfour Specialized Hospital - Egypt
COMPUTER SKILLS
- Auto Cad
- Rivet (3D Modeling and Coordination).
- Navisworks
- Microsoft Office.
- Elite Fire Simulation