This document discusses various electrical and hydraulic tools that are essential for handling wires, cables, and electricity/hydraulics installation. It describes common tool types like pliers, screwdrivers, wire pullers, benders, drills, soldering equipment, hammers, and measuring instruments. For each tool type, specific varieties are outlined like slip joint pliers, Phillips screwdrivers, electric drills, soldering guns, claw hammers, steel tapes, and more. These tools are important for safely installing and working with residential, commercial, and industrial wiring and systems.

1. SELECTING
ELECTRICAL AND
HYDRAULIC
TOOLS

2. ELECTRICAL AND HYDRAULIC TOOLS
ELECTRICAL AND HYDRAULIC TOOLS ARE
ESSENTIAL IN HANDLING WIRES AND CABLES.
THESE TOOLS ARE BASICALLY USED FOR
SAFETY PURPOSES AND INSTALLATION OF
RESIDENTIAL, COMMERCIAL AND INDUSTRIAL
BUILDINGS. INTRODUCING THESE TOOLS
ALLOWS US AND ELECTRICIANS TO HAVE AN
EASE IN THE PROCESS OF HANDLING
ELECTRICITY AND HYDRAULICS.

3. KINDS OF ELECTRICAL TOOLS AND
MATERIALS
1. ELECTRICAL TOOLS
A. PLIERS
THESE ARE HAND TOOLS USED TO HOLD
OBJECTS TIGHTLY. THESE ARE ALSO
USEFUL FOR BENDING AND
COMPRESSING A WIDE RANGE OF
MATERIALS.

4. TYPES OF PLIERS
1.) SLIP JOINT PLIERS

5. TYPES OF PLIERS
2.) CRIMPING PLIERS

6. TYPES OF PLIERS
3.) SIDE CUTTING PLIERS

7. TYPES OF PLIERS
4.) RETAINER RING PLIERS

8. TYPES OF PLIERS
5.) LONG NOSE PLIERS

9. TYPES OF PLIERS
6.) SNAP RING PLIERS

10. B. SCREWDRIVERS
THESE ARE USED TO DRIVE AND
PULL-OUT SCREWS. THESE ARE
STAR-SHAPED, CROSS-SHAPED TIP
OR FLATTENED TOOL WHERE THE
HEAD OF THE SCREW FITS FOR
TURNING.

11. TYPES OF SCREWDRIVERS
1.) STANDARD TYPE SCREWDRIVER

12. TYPES OF SCREWDRIVERS
2.) PHILLIPS SCREWDRIVER

13. TYPES OF SCREWDRIVERS
3.) OFFSET SCREWDRIVER

14. C. WIRE PULLER (FISH WIRE)
IT IS A TOOL USED TO ROUTE NEW WIRING THROUGH
WALLS AND ELECTRICAL CONDUIT.

15. D. EMT BENDER
IT IS A TOOL USED TO BEND ANGLES IN ELECTRICAL
METAL TUBING.

16. E. DRILLING EQUIPMENT
IT IS NEEDED TO MAKE HOLES IN
BUILDING STRUCTURE FOR
PASSAGE OF WIRES AND CONDUITS
IN BOTH NEW AND OLD
INSTALLATION INDOOR AND
OUTDOOR WIRINGS.

17. TYPES OF DRILLING EQUIPMENT
1.) ELECTRIC DRILL

18. TYPES OF DRILLING EQUIPMENT
2.) AUGER BRACE

19. TYPES OF DRILLING EQUIPMENT
3.) HAND DRILL

20. TYPES OF DRILLING EQUIPMENT
4.) GIMLET

21. TYPES OF DRILLING EQUIPMENT
5.) DRILL BITS

22. TYPES OF DRILLING EQUIPMENT
6.) MASONRY BITS

23. F. SOLDERING TOOLS
THESE SUPPLY HEAT TO MELT THE
SOLDERING ROD SO THAT IT CAN
FLOW INTO THE JOINT BETWEEN
TWO WORKPIECES.

24. TYPES OF SOLDERING TOOLS
1.) SOLDERING GUN

25. TYPES OF SOLDERING TOOLS
2.) SOLDERING IRON

26. TYPES OF SOLDERING TOOLS
3.) BLOW TORCH

27. G. HAMMERS
THESE ARE USED TO DRIVE AND
PULL-OUT NAILS AND FOR A WIDE
RANGE OF DRIVING, SHAPING, AND
BREAKING APPLICATIONS.

28. TYPES OF HAMMERS
1.) CLAW HAMMER

29. TYPES OF HAMMERS
2.) BALL PEEN HAMMER

30. TYPES OF HAMMERS
3.) MALLET (PLASTIC OR RUBBER HAMMER)

31. H. MEASURING TOOLS AND
INSTRUMENTS
THESE ARE MEASURING DEVICES FOR
PHYSICAL QUANTITY. THESE ARE ALSO
USED TO MEASURE THE VALUE OF
VOLTAGE, CURRENT AND RESISTANCE,
WIRE LENGTH, OPENING SIZES OF
WIRES, CONDUIT, AND OTHER ITEMS.

32. TYPES OF MEASURING TOOLS AND INSTRUMENTS
1.) STEEL TAPE

33. TYPES OF MEASURING TOOLS AND INSTRUMENTS
2.) WIRE GAUGE

34. TYPES OF MEASURING TOOLS AND INSTRUMENTS
3.) VERNIER CALIPER

35. TYPES OF MEASURING TOOLS AND INSTRUMENTS
4.) MULTITESTER

36. TYPES OF MEASURING TOOLS AND INSTRUMENTS
5.) VOLTMETER

37. TYPES OF MEASURING TOOLS AND INSTRUMENTS
6.) AMMETER

38. TYPES OF MEASURING TOOLS AND INSTRUMENTS
7.) CLAMP METER

39. TYPES OF MEASURING TOOLS AND INSTRUMENTS
8.) GALVANOMETER

40. TYPES OF MEASURING TOOLS AND INSTRUMENTS
9.) MICROMETER CALIPER

41. TYPES OF MEASURING TOOLS AND INSTRUMENTS
10.) MEGGER

42. TYPES OF MEASURING TOOLS AND INSTRUMENTS
11.) PHASE SEQUENCE TESTER

43. TYPES OF MEASURING TOOLS AND INSTRUMENTS
12.) HIGH POTENTIAL TESTER

44. I. SAWING AND CUTTING TOOLS
TWO TYPES OF COMMONLY USED SAW
1.) HACK SAW

45. TYPES OF MEASURING TOOLS AND INSTRUMENTS
2.) KEYHOLE SAW

46. THANK YOU!!!