Electrical Engineer

1. Marwan Ibrahim,
Electrical Eng
Day of birth: 2/3/1981
12A - 400, 31433, KSA-Dammam
00966-568696908
marwanabra@hotmail.com
married
Work experience
2005 - 2007
maintenance engineer
Syrian Company For Storage and Distribution Of Petroleum Products
Responsibilities:
follow up and repair all the equipment which related to filling the home gas cylinders(electro photo sensors - check scale -
sealing machine - motors ...)
Oversee readiness of ( generators groups -transformers -electric network ….)
Oversee readiness of ( firefighting network and its fittings - diesel pumps-electric pumps )
Dependents way in work of preventive Maintenance
2007 - 2010
industrial control engineer /maintenance
Syrian Modern Cables
Responsibilities:
Held a working group consisting of 5 engineers and 12 technicians in three times ( shifts) .
To completion the following works :
Drivers
Converter-inverter
PLC(Siemens)
Motors /AC-DC/
maintenance almost of the sensor “ limit switch , approximately, electromechanical ,photoelectric , …”
Design and adjustment and rectifying control circuits
Repairing of electrical faults in control circuit and power circuit

2. 2009 - 2010
T&C engineer
Grewaty Contracting Group
Responsibilities:
contracting company for the power outdoor substation 66/20KV&20KV/380V as Testing and Commissioning - - Engineer .
Testing of power transformers
Testing of surge arresters
Testing of circuit breakers
Testing of energy meters
Participation in preparing of technical specifications for electrical equipments
Evaluation of technical offers
2010 - 2012
Testing & commissioning engineer
AL-OJAIMI Group
Responsibilities:
Testing the following devices and equipment:
Diff 87L /Dist 21 /DEF 67-67N Relays: Micom P54x
Overcurrent relay 50/51/50N/51N : Micom P12x
Over/under voltag relay 27 /59 Micom P923
Synchronizing relay KAVS 100
Course in Siemens protection relay (7SD522 ,7UT613, 7SJ60 )
13.8KV SWGR control and protection
Transducer apparatus
PT testing
CT testing
AUX relay
Metering test
Neutral Grounding Resistors
surge arrestor
AC/DC panels
SCADA & SOE & Annunciation system & Communication scheme for substation
Commissioning for all the drawing
Station service transformer tests
Stability tests
Functional penal test
Preparing As-built Drawing

3. 2012 - 2014
production Manager
AL-OJAIMI Group
Responsibilities:
enameling wire plant including : production dept. - LAB and QA/QC dept. & maintenance dept ….
type of enamel machines MZV 6&7 from MAG Austria , 8 production lines ,
Lab and QC equipment : 14 devices where it cover all the standard tests.
Heavy copper wire drawing machine (RBD) from 8 mm .
Suppressor for up casting copper furnaces and bus bar machines .
Training course for three month with Austrian technical team
2014 - 2016
Lead Electrical Engineer
Nesma
Responsibilities:
Medium & Low voltage distribution network project where the project include : 77 “ 13,8 KV substations and that is through »
switchgear » RMU » MRMU “ » some special voltages ( 3,3KV & 4,16 KV ) .
i can describe my duty from starting point as following :
Study and check all the standards and specifications that is regarding of the submitted material .
Study the design and modify it as required .
Determine and survey the site of substations, route of the cables .
Study of the load and arrange the finel setting of the protection relays.
Supervisor for Testing &Commissioning for 13.8 KV switchgear (ABB relay REF 610 ,REF 615 ) and low - voltage switchgear
and transformer up to 1500 KVA .
Supervisor for cable tests ( insulation &VLF test ) .
Straight joint and termination of the cables.
Configuration and preparation SCADA system to connect all the substations with SCADA center
Prepare the drawing as built drawing .
Certificates and Courses
Bachelor's degree
electrical power engineering / Damascus University
ABB course
PCM600
MAG course
operation and maintenance by Austrian technical team

4. Other skills and abilities
Language proficiency
Arabic
English
Driver's license
Groups A
Other skills and abilities:
 Microsoft Windows, MS Office Applications
 Autocad
 Matlab (simulation)
 PLC (programming twido )
 MICOM S1 ( Areva relays)
 DIGSI (Siemense)
 Supervising clerks and administrative staff
Created by CV generator IQresume.com