2. A.One body of fabric that is 27 “wide x
44” long .
B . Trim piece that is 9”wide x
44”long
C. Scissors
D. Needle and thread
E. Pins
F. Tape measure
G. Tailor’s chalk
3. A. Place the trim piece
or the 9” coordinating
fabric pretty -side up.
B. On the top, place the
27” main fabric pretty
side down aligning the
top raw edges.
4. Take the body of the
27” fabric and start
creating a little roll
like sushi. Roll the
fabric up to the
center of the 9”
coordinating fabric .
5. Take the bottom of
the coordinating
fabric and bring it
up over the burrito.
Align the raw edges
with the raw edges
of the other fabric.
Pin in place along
the raw edges.
6. After pinning
the entire row
start sewing it
make a seam
allowance of
half inch .
7. Begin to tug at
the fabric inside
the burrito / sushi
, pulling it out of
the tube, until it
looks like this.
8. Fold pillow case in half
wrong sides together.
Pin around the raw
edges on the side and
bottom of the pillow
case.
Stitch together down
the side and across the
bottom using ¼ seam
allowance.
9. Flip the Pillowcase
wrong side out and
press the seams down.
Pillowcase is facing
right sides together. Pin
the side and bottom
seams.
Stitch the side and
bottom seams using a
1/2” seam allowance.