1. SABD | Building Construction II | BLD 60703 | Project 2 Understanding Forces in Building Construction | Mr Edwin | Cherilyn Chia 0321986 | Lim Woo Leon 0322180 | Shreya Maria Wilson 0322173
CONSTRUCTION DETAILSASU SKYSONG
Cleats
Welded onto the top of the A-frame
columns to allow attachment of cables.
SPIGOT connection
Used for the connection of 2 circular steel
tubes to achieve the desired length, which
is 111 feet.
PIN JOINT
Attach column (masts) to base plate
through welding.
Telescopic strut connection
Steel plate is welded and connected to a steel
structure with a smaller diameter.
welded JOINT
with cleats
PIN JOINT
Bale ring
MEMBRANE
PLATE
elevATION SCALE1:500
BALE RING
PTFE membrane is clamped onto the bale ring to form
conical shaped structures. It is found on the top and bottom
of the A-frame columns alternatively to achieve its form.
Tensioning Angle
Fabric Clamp Plate
Clamp Plate all thread Rod
All thread Rod, bolts and nuts
Angle Receiving Plate with
Spacer Plates to allow for
overflow
Scupper Plate assembly
PTFE membrane
Catenary Cable
membrane plate
Clamps onto the fabric’s corner to pull the fabric
tightly, holds the ends of the catenary cables that
run in the fabric edge pockets.
C:UsersShreyaDesktopeditsASU002_0.png
CABLE ANCHORING
Steel cables are anchored to the steel cleats which are
welded onto the base plate. The base plate is then
secured onto the concrete foundation with bolts and nuts.
Steel cable
Hinge joint
Base plate
Bolted joint
Welded joint
Steel plate
Circular
Hollow
Column
Galvanized
steel
structure
Conical
steel
structure
Pin Joint
Base plate
Membrane plate
Bolted connection to the steel cable
Tension cables to hold the A-frame column
CONCRETE POSTS
PLAn SCALE1:1500
References: ASU SkySong Innovation Center - Scottsdale, AZ. (2017, March 23). Retrieved June 16, 2017, from https://www.fabritecstructures.com/engineering-tensioned-fabric-structures-ASU-Skysong
BANANA
TRUSSES
tension cable
anchorpoint
TOP RING
bottom RING MEMBRANE
PLATE
welded JOINT
with cleats
CATENARY edge CLAMP
Clamps fabric to catenary cables running
next to the banana trusses.
Secured by bolts and nuts
Clamped PTFE
membrane
Catenary cables