20180618 international standards used locally worldwide omae2018

International standards used locally
worldwide – OMAE2018-78776
Adopting ISO standards for the (offshore) oil and gas industry as
national standard by 34 European countries in a single process
Jarno Dakhorst, consultant Energy
OMAE 2018 | Madrid, Spain | 17-22 June 2018 1

Outline
• Introduction into standardisation
• Standardisation in oil and gas sector
• European approach
• Offshore structures and Arctic operations standards
2OMAE 2018 | Madrid, Spain | 17-22 June 2018

3
INTRODUCTION INTO
STANDARDISATION
OMAE 2018 | Madrid, Spain | 17-22 June 2018

Why standardisation?
Overcoming
trade barriers
Vision oil & gas sector
Licence to operate
Speaking the same
language
Harmonisation of
specifications

What is standardisation?
Standardisation …
• … is an open multi-stakeholders process => all parties
concerned invited to participate for broad support
• … is a consensus-building process => no sustained
opposition
• … is a transparent process => all agreements are
publicly available for comments and use

What are standards?
Standards…
• … are documents with agreements on products,
services and systems
• ... are designed for voluntary use
• ... address today’s challenges:
― facilitating international trade
― spreading knowledge, transferring technology as well as good
management and conformity assessment practice
― promoting safety and security
― assisting in environmental and health protection
― deploying advances in IT and new technologies
― contributing to good (public) governance

What is relationship between regulation,
standardisation, certification?
7
One way to
demonstrate
is applying
standards
Regulator has
confidence in
value of certificate
to demonstrate
compliance with
law
Third party
conformity
assessment
increases
credibility
Organisation has to
comply with legal
requirements
GOLDEN
TRIANGLE

8
STANDARDISATION IN
OIL AND GAS SECTOR
© Lot Bakker | LOT of Illustrations | http://lotofillustrations.com/

ISO/TC 67 – Title and scope
• Title:
― Materials, equipment and offshore structures for the
petroleum, petrochemical and natural gas industries
• Scope:
― Standardisation of the materials, equipment and offshore
structures used in the drilling, production, transport by
pipelines and processing of liquid and gaseous hydrocarbons
within the petroleum, petrochemical and natural gas industries
Excluded: aspects of offshore structures subject to IMO
requirements (ISO/TC 8).

ISO/TC 67 – Goals
• Prepare standards required by the industry
• Prepare standards that are adopted worldwide by
bodies such as ABNT (Brazil), API (USA), CEN
(Europe), GOST R (Russian Federation), GSO (Gulf
Region) and SAC (China)
• Prepare standards that are recognised by regulators
• Publish standards that enable companies to minimise
their specifications
• Deliver standards to the target dates on the agreed
work programme

ISO/TC 67 – Membership
11
Status: June 2018
Key
Blue: Participating member (33)
Orange: Observing member (30)

ISO/TC 67 – Structure
New proposed

ISO/TC 67 – Deliverables
13
For illustration only
SOURCE: IOGP | www.iogp.org/international-standards

ISO/TC 67 – Track record
14
These figures
include corrigenda
Figure for 2018 is
target number of
publication by end
of year
Currently about 50
projects (new &
revisions) on work
programme
0 2
6 6 8
19
41
60
76
96
109
116
125 128
134
141
150
159
163
170
177 185
193
199
211
0
20
40
60
80
100
120
140
160
180
200
220
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018

15
EUROPEAN APPROACH

CEN/TC 12 – Title and scope
• Title:
― Materials, equipment and offshore structures for the
petroleum, petrochemical and natural gas industries
• Scope:
― Similar to ISO/TC 67, except that gas infrastructure from the
input of gas into the onshore transmission network up to the
inlet connection of gas appliances (covered by CEN/TC 234),
installations and equipment for LNG (covered by CEN/TC
282) are also excluded
― Standardisation is to be achieved wherever possible by
adopting ISO/TC 67 standards

CEN/TC 12 – Mode of operation
• Standards are usually developed under Vienna
Agreement in ISO/TC 67 working groups, with active
participation of European experts (at least 5 countries)
• European experts are expected to check that EU
environmental and regulatory issues are taken into
account as well as CEN policy on normative references
• Published ISO standards are in principal identically
adopted as European standards (i.e. EN ISO) and with
that as national standards in 34 countries
• This approach is coherent with CEN/TC 12’s motto
“International standards used locally worldwide”
• Ad-hoc groups are established to tackle specific issues

CEN/TC 12 – Guidance for European experts
EXAMPLE ASME B 16.5, Pipe flanges and flanged fittings: NPS 1/2
through NPS 24 metric/inch standard versus EN 1759-1, Flanges and their
joints – Circular flanges for pipes, valves, fittings and accessories, class
designated – Part 1: Steel flanges, NPS 1/2 to 24 and EN 1092-1, Flanges
and their joints - Circular flanges for pipes, valves, fittings and accessories, PN
designated – Part 1: Steel flanges

CEN/TC 12 – Membership
19
Status: June 2018
SOURCE: Wikipedia
Key
Dark green: Member
Light green: Affiliate
CEN members
• 28 EU countries
• 3 EFTA countries (Iceland,
Norway and Switzerland)
• 3 other countries (Former
Yugoslav Republic of
Macedonia, Serbia and
Turkey)

CEN/TC 12 – Track record

21
OFFSHORE STRUCTURES AND
ARCTIC OPERATIONS
STANDARDS

ISO/TC 67/SC 7 Offshore structures
General requirements
ISO 19900
Specific requirements
ISO 19901-1 Metocean ISO 19901-6 Marine operations
ISO 19901-2 Seismic ISO 19901-7 Stationkeeping
ISO 19901-3 Topsides ISO 19901-8 Marine soil investigations
ISO 19901-4 Foundations ISO 19901-9 Structural integrity management
ISO 19901-5 Weight control ISO 19901-10 Marine geophysical investigations
“Structure type” standards
Bottom founded
structures
ISO 19902 Fixed steel
ISO 19905-1, - 2 & -4
Jack-up MOUs
General structures
ISO 19903 Concrete
ISO 19906 Arctic
Floating structures
ISO 19904 Floaters
ISO 19905-3 Floating
MOUs

ISO/TC 67/SC 7 Offshore structures
• Updating of existing standards:
― Alignment and updating terminology
― Reorganisation of structure and updating cross-references to
avoid duplication
― Incorporating new insights and developments as well as
users experiences / feedback
― Elaborating on / clarifying topics responding to market needs
― Making text more clear, concise and requirements focused,
and moving guidance to annexes / supporting documents
• New standards:
― Structural integrity management (SIM)
― Marine geophysical investigations

ISO/TC 67/SC 8 Arctic operations
ISO 35101 Working environment
ISO 35102 Escape, evacuation and
rescue from offshore
installations
ISO 35103 Environmental monitoring
ISO 35104 Ice management
ISO 35105 Material requirements for
arctic operations
ISO 35106 Arctic metocean, ice and
seabed data
Possible new work items
• Arctic and cold regions oil and oil
products spill response
• Working environment – Control

25
Thank you for your attention!
Questions?
jarno.dakhorst@nen.nl
+31 6 33 334 671 or +31 15 2 690 245
@jarnodakhorst
https://nl.linkedin.com/in/jarnodakhorst
Background: 3D printed statue of myself
International standardisation has accelerated developments in additive manufacturing
OMAE 2018 | Madrid,Spain | 17-22 June 2018

20180618 international standards used locally worldwide omae2018

Recommended

Recommended

More Related Content

Similar to 20180618 international standards used locally worldwide omae2018

Similar to 20180618 international standards used locally worldwide omae2018 (20)

More from Jarno Dakhorst

More from Jarno Dakhorst (20)

Recently uploaded

Recently uploaded (20)

20180618 international standards used locally worldwide omae2018