Licensed Mechanical Engineer, Registered Master Plumber, Certified Project Management Professional (PMI-PMP), completed Master in Business Administration (MBA), passed the Occupational Health & Safety Management (NEBOSH International General Certificate-IG1 Unit) examination, and completed Welding Inspector Course. Over Twenty-Four (24) years Multidiscipline Experienced in Engineering & Construction Industries including 18 years in Oil & Gas Projects. Have been a Project Engineer, Piping Engineer, Field Engineer, Piping/Mechanical Inspector, & Construction Superintendent (both in Contractor & Client as Company (Saudi Aramco) Representative). Involved in design/engineering (FEED), fabrication, site installation, testing, and commissioning of various scales of projects; mostly in Oil & Gas (offshore & onshore / Greenfields & Brownfields)

1. Page 1 of 12
PROFESSIONAL SUMMARY
Licensed Mechanical Engineer, Registered Master Plumber, Certified Project Management
Professional (PMI-PMP), completed Master in Business Administration (MBA), passed the
Occupational Health & Safety Management (NEBOSH International General Certificate-IG1 Unit)
examination, and completed Welding Inspector Course. Over Twenty-Four (24) years Multidiscipline
Experienced in Engineering & Construction Industries including 18 years in Oil & Gas Projects. Have
been a Project Engineer, Piping Engineer, Field Engineer, Piping/Mechanical Inspector, &
Construction Superintendent (both in Contractor & Client as Company (Saudi Aramco)
Representative). Involved in design/engineering (FEED), fabrication, site installation, testing, and
commissioning of various scales of projects; mostly in Oil & Gas (offshore & onshore / Greenfields &
Brownfields).
EXPERIENCE
SUMMARY OF CONSTRUCTION PROJECTS EXPERIENCED
 O&G Refineries
 Liquefied Natural Gas Plants
 Gas & Oil Separation Plant (GOSP)
 Pipeline & Piping (onshore & offshore) fabrication, coating, Tie-in (cold & hot topping –
onshore & subsea), loadout, and laying/installation
 Offshore Platforms fabrication, loadout, and installation-Jacket, Topside, Tie-in, & Hook-up
 Offshore/Onshore Hook up works (Multidiscipline)
 Erection Works – piping, platform & jacket installation (heavy lifting), and structural assemblies
 Insulation & Heat Tracing Works
 Industrial processing plants
 Bulk Plant & Distribution Hub/Terminal (Electro-mechanical, Tanks, piping, pipelines, buildings)
 Large Volume Tanks construction (various types)
 Water Treatment Plant
 Wellheads (Oil & Gas - onshore/offshore)
 Pump Stations
 Abandonment & Recovery works-pipeline
 Plant shutdown & upgrading
 Decommissioning works – Platform/Pipeline
 Hi-rise buildings (MEPF)
 Industrial & commercial buildings (MEPF)
JOEL B. YOSORES
(RMEE, PMP, RMP, MBA)
+639997191242 (Philippines)
+966548120057 (Saudi Arabia)
e-Mail: joelyosores@yahoo.com
Skype: +639997191242
MECHANICAL ENGINEER

2. Page 2 of 12
 Clean Rooms (MEPF)
 Mall (MEPF)
 Cell Sites Relay Stations (Multidiscipline)
 Airport (MEPF)
 Site Civil Works
 Structural fabrication and installation
JANUARY 2023 – PRESENT, SAUDI ARABIA
MECHANICAL ENGINEER-PLANNING & COST CONTROL, PROJECTS PIONEERS COMPANY
Responsible in Planning & Cost Control on the Mechanical, Piping, & Pipeline Projects. Job also includes
other disciplines associating the mechanical projects.
MARCH 2022 – JANUARY 2023, SAUDI ARABIA
CONSTRUCTION SUPERINTENDENT, BR. C.A.T. INTERNATIONAL LTD.
Team Leader in Shutdown and construction of Wellheads, Plant Piping & Mechanical Systems in
multi-discipline works - Civil/Structural/Mechanical/Piping, and Pipelines (Trunkline & Flowlines).
Works include generation of work procedures/methodologies (installation & pre-commissioning),
planning of site activities, resources distribution, ensuring appropriate work permits acquired, actual
work supervision, supervision-ensuring safe working environment and quality of works, monitoring,
logistic works, progress reporting, interfacing, and focal point on technical aspects.
JULY 2015 - MARCH 2022, SAUDI ARABIA
PROJECT ENGINEER/SUPERINTENDENT/COMPANY SITE REPRESENTATIVE (CSR)-
MULTIDISCIPLINE, SAUDI ARAMO (SMP-PROJECT MANAGEMENT TEAM)
Responsibilities include not limited in overseeing and managing site construction (Supervising the
contractors) to achieve project objective within allocations, project specifications, and safety
requirements. Involved in Front End Engineering & Design, Construction, Testing/pre-commissioning,
commissioning, and completion works. Focal point and leads in resolving site/construction technical
issues. Work also involves actual site supervision, responses Site TQs, and reviews and approves
Construction Methodologies, Job Safety Analysis & other deliverables, review and ensures effective
construction/execution plans, plan & movement of resources, HSEQ plan and compliances, change
management (MOC), progress (target vs. actual production) monitoring, remediation, reporting,
interfacing, and other project engineering & management works.
AUGUST 2012 – JUNE 2014, PAPUA NEW GUINEA
PIPING/MECHANICAL ENGR./INSPECTOR, CHICAGO BRIDGE & IRON (CB&I) COMPANY
Responsible in the establishment and general implementation of the quality and proficiency of
General Mechanical & Piping (UG/AG) during the installation and complete Testing/pre-
commissioning and commissioning (includes Test package preparation, review and close-out) to
handover of general area - processing plant, 8 Wellheads, tanks, and utilities for the 1B scf per day
capacity gas (LNG) conditioning plant.
MARCH 2007 – JUNE 2012, SINGAPORE/THAILAND/INDONESIA
SENIOR FIELD ENGINEER (ONSHORE/OFFSHORE), NIPPON STEEL ENGINEERING CO. LTD.
Responsible in the establishment of work procedures and field engineering (implementation).
Oversee and engineers the fabrication, loadouts, complete construction (onboard) and hook -ups,
Testing/pre-commissioning & commissioning of subsea pipelines & components and offshore
platforms. Job also includes inspection and load testing of equipment/appliances and rigging gears.

3. Page 3 of 12
MAY 2005 – MARCH 2007, RUSSIA
PIPING/MECHANICAL ENGR./INSPECTOR, CHICAGO BRIDGE & IRON (CB&I) COMPANY
Responsible in the quality of works – multidiscipline in the construction and complete testing of
superstructure (2 x 100,000 cubic meter full-containment LNG storage) and 2 x 1,630 cubic meter LNG
Hortonsphere pressure vessels and associated piping works.
JUNE 2003 – APRIL 2005, NIGERIA
PIPING/MECHANICAL ENGR./INSPECTOR, CHICAGO BRIDGE & IRON (CB&I) COMPANY
Responsible in the implementation of the quality and proficiency for the Mechanical Installations, piping
fabrication, installation, and testing/pre-commissioning of General Piping (UG/AG) systems and pipelines
(in-plant, off-sites, and jetty – at loading arms) for the 4.1 mtpa LNG production train-4 project.
FEBRUARY 2002 – JUNE 2003, PHILIPPINES
PROJECT ENGINEER, MODAIR MANILA COMPANY LIMITED, INCORPORATED
Responsible in the project engineering (documentation and implementation) of the construction, pre-
commissioning/testing, and commissioning of General Mechanical System in Industrial Plant and
communication projects; MEPF Works.
MAY 1999 – FEBRUARY 2002, PHILIPPINES
PROJECT ENGINEER, SUMISETSU (SUMITOMO DENSETSU) PHILIPPINES, INC.
Responsible in the project engineering (documentation and implementation) of the construction, pre-
commissioning/testing, and commissioning of General Mechanical System in Industrial Plant, High-Rise
Condominium, and airport projects; MEPF Works.
APRIL 1998 – MAY 1999, PHILIPPINES
PROJECT ENGINEER, ALPA PLUMBING WORKS, INCORPORATED
Responsible in the project engineering of the construction, pre-commissioning/testing, and commissioning
of General Plumbing System in high-rise office & Condotel building projects.
JULY 1997 – APRIL 1998, PHILIPPINES
ASST. PROJECT ENGINEER, PHILSAFETY SYSTEMS EQUIPMENT, INCORPORATED
Responsible in the project engineering of the construction, pre-commissioning/testing, and commissioning
of Fire Protection System in high-rise Condotel building project.
EDUCATION
ACADEMIC/FORMAL
MACH 1997 (BACHELOR’S DEGREE)
B.S. MECHANICAL ENGINEERING, ANDRES BONIFACIO COLLEGE, PHILIPPINES
Completed on time (exact 5 years as required). Passed the Licensure Board Examinations for Mechanical
Engineers and Master Plumbers given by Professional Regulation Commission (PRC).
DECEMBER 2022 (POST GRADUATE/MASTER’S DEGREE)
MASTER IN BUSINESS ADMINISTRATION (MBA), ANDRES BONIFACIO COLLEGE, PHILIPPINES
Thesis Title: “Workplace Well-being and Work Engagement Among Employees in the
Department of Public Works & Highways First and Third Engineering District Offices”

4. Page 4 of 12
INTERNATIONAL CERTIFICATIONS
AUGUST 2020, U.S.A (PROJECT MANAGEMENT CERTIFICATION PREPARATION COURSE)
PROJECT MANAGEMENT PROFESSIONAL (PMP), TECHNOLOGICAL INSTITUTE OF AMERICA
Completed and passed the Certification Examination given by Project Management Institute (PMI).
DECEMBER 2020, (OH&S MANAGEMENT CERTIFICATION PREPARATION COURSE)
OCCUPATIONAL HEALTH & SAFETY MANAGEMENT (NEBOSH IGC), HSEPRO, DUBAI
Completed and passed the International General Certification IG1 Unit Examination given by NEBOSH
TECHNICAL COURSES
MARCH 2022, (WELDING TECHNOLOGY/PROFESSIONAL COURSE)
WELDING INSPECTOR COURSE, HEATS SCHOOL OF WELDING TECHNOLOGY, INC.,
PHILIPPINES
Completed
AUGUST 2014, (202 HRS. SKILL DEVELOPMENT COURSE/TRAINING)
PIPE FITTING, TECHNICAL SKILLS DEVELOPMENT AUTHORITY (TESDA), PHILIPPINES
Completed
SKILLS & ABILITIES
 Safety & Quality Management
 Project/Construction Management
 Organizing
 Teamworking
 Leadership
 Problem Solving
 Time Management
 Negotiating
 MS Office Applications proficient
 Engineering Codes & Standards conversant
 Technical Query Response
 Quality Management
 Judgment and decision-making skills
 PERT/CPM & Primavera P6 Execution
 Construction Methodologies (generate &
supervise)
 Job Safety Analysis/Risk Assessment
(Generate & apply)
 Interpersonal skills
 Critical Thinking
 Communicating/Coordinating
 Detailing
 Creativity
 Flexibility & Agility
 Pressure handling
 Learning/adaptability
 Excellent customer service skills
TRAINING/SEMINARS
@ Philippine Society of Mechanical
Engineers (PSME):
 Facility Integrity Management
 Scaffolding Safety
 Excavation Safety
 Crane Safety
 Decentralization, & Digitalization
 Flanged Joints Integrity: Principles,
Applications, & Practices
 Erection/Installation of Static Equipment in
Large Oil & Gas Refinery Plant

5. Page 5 of 12
 Machinery & Equipment Safety
 11TH Middle East Regional Conference (MERC)
Topics:
 Firewater Demand Calculation
 Green Building Strategies
 Fire Protection Conference
Topics:
 Importance of Smoke Barrier
 Interfacing of FDAS to BMS
 Fire Protection Requirements for Elevators
 Overview of Mechanical Fire Protection
Manual
 BFP FSIC Overview& Role of Mechanical
Engineers Fire Code 2019 IRR
 Operation & Maintenance of the Building Fire
Protection
 Electrical Requirements for Fire Pump
System on Philippine Electrical Code
 Advantages of Sprinkler System on Various
Application.
 Comparison of Variable Speed Technologies:
Fluid Coupling vs. Variable Frequency Drive
(VFD)
 How to Become Certified Fire Protection
Specialist (CFPS)
 Basis of Design & Cost Estimation for Run-of-
the- River Hydroelectric Power Plant
 Comparative study on diesel & gasoline fueled
vehicles
 Fire Protection System for Industrial Plants
 Operational Excellence & Mean Management for
Manufacturing Engineering
 Waste Water Treatment Facility Automation
 RIRR of RA 9514 Fire Code of the Philippines
 Power Generation: The O&M Critical Challenge
in Keeping the Plant Reliable, Efficient, and
Sustainable in the Stringent Requirements of 4th
Industrial Revolution
 Overall Equipment Effectiveness Support Total
Productive Maintenance Goals in the Industry
4.0
The 3 D's of Low Carbon Economy:
Decarbonization
@ American Society of Plumbing Engineers
(ASPE):
 Design of Domestic Hot Water Systems Part 1
 Design of Domestic Hot Water Systems Part 2
 Sizing Grease Interceptor
 Community Hi-Rise Plumbing Installation
 Design on process parameters optimization
for gears shaving using Tamaguchi Method
 Construction of 1st in the world
Westinghouse 3rd Generation AP1000
Nuclear Power Plant
 Hydrogen: The Fuel of the Future
 Integrating Predictive Maintenance with
Industry 4.0
 Production of Gaseous Fuel from
Agricultural Biomass Waste of Power
Generation Application
 Understanding Design Formulas:
Application to Design of Gears &
Mechanical Spring
 Rooftop electricity-Solar home system
 Testing & commissioning of water-based
fire protection system
 CO₂ Refrigerant for Industrial Refrigeration
 Underground Cabling for Subways
 Chilled Water Flow Control
 Dental Ventilation Design & Application
 Effect of Water & Air on Ammonia
Refrigeration Plant
 Elevator & Escalator Design
 Fire Protection for Advanced Light Water
Reactor for Nuclear Power Plant
 Fundamentals & Design of Foam
Suppression System
 Modernized Approach on the Central
Control System of the Integrated Solid
Waste to Energy & Fertilizer Process &
Plant in the Military & Industrial Complex
 Nitrogen Removal Strategy: Design of a
Complete-mix Activated Sludge Process for
Clark Water Corporation’s Wastewater
Treatment Plant
 Overview of Project Management in
Managerial Approach
 Smoke Control System
 Robert's Rule of Parliamentary Procedures
 High-rise Fire Protection
 Air Aspirating Smoke Detection
 Storm Drainage System
 Plumbing 101-12 Steps of a Successful
Plumbing Design

6. Page 6 of 12
 Vacuum Plumbing System
 Swimming Pool Design
 Electric & Pneumatic Actuators for Quarter -turn
Valves
 Water Heater Sizing
 Introduction to Sanitary Hospitals
 CPVC for Commercial Plumbing & Hydronic
HVAC Application
 Natural Gas & Propane Sizing
 Fire Protection Fundamentals
 Fire Suppression Using Clean Agent
 Introduction to Heat Pump Water Heaters
 Pump Components
@ Philippine Society of Plumbing Engineers
(PSPE):
 Plumbing Hydraulic Calculation for Hi-Rise
Buildings
 Therapeutic SPA Filtration System Design
 Electrical Design for Commercial Establishment
with Application of Philippine Electrical Code
 Familiarization & Understanding of plumbing
Plans in Hi-Rise Buildings
 National Standard on the Design, Construction,
and Operation of Septic Tank System
@ National Master Plumbers’ Association of
the Philippines (NAMPAP):
 Safety: Working in a Confined Space
 Central Medical Gas Piping System
 Focusing on Health Innovative Development in
Plumbing Industry
 Lived Experiences of Contractors Managing
Human Resources
 Water Distribution System Design of Mega Tall
Buildings
 Sustainable Building Design
@ Registered Continuing Education Program
(RCEP)
 Introduction to Carpark Ventilation Solutions I
by Air Movement & Control Association
International Inc. (AMCA)
 Introduction to Carpark Ventilation Solutions II
by Air Movement & Control Association
International Inc. (AMCA)
 Electric Tankless Heater Design Application
and Pitfalls
 Valves 101: The Ins & Outs of Valve
Options in Commercial Plumbing
 Non-potable Water Reclaim System Review
 Water Saving with Every Flush: Improving
Water Conservation in High Performance
Buildings
 Fire Sprinkler Systems for Residential
Occupancies
 High-Containment System Components
 Client Retention
 Hydrotesting/Leak Testing
 Plumbing Permit Requirements & Process
 Electrical Design for Residentials with
Application of Philippine Electrical Code
 Basic Sizing of Swimming Pool pumps,
Filter, and 3 Methods of Filtration
 Understanding Electrical Power System and
Plumbing Electrical
 Plumbing Repair & Maintenance
 Introduction to Triple Constraints in
Construction Management: Scope, Time,
and Cost
 Hydraulics of Plumbing for Water Supply
Line
 Understanding Importance of Life& Safety in
Building
 Water Resources Challenges and Mitigation
 Field Modifications of Fire, Smoke, and
Combination Fire/Smoke Dampers
by Air Movement & Control Association
International Inc. (AMCA)
 International Energy Conservation Code:
2021 Changes, Getting Involved in the

7. Page 7 of 12
 Multifamily Indoor Air Quality (IAQ) & Design
Considerations
by Air Movement & Control Association
International Inc. (AMCA)
 Better Understanding for Better Builds: Infiltration
Test Data & Storm Water Design
(by Century Engineering)
 21ST Century Solution to Failing Septic System
Infrastructure
(by Century Engineering)
@ American Society of Heating, Refrigerating
and Air-Conditioning Engineers (ASHRAE)
 Achieving Optimal Indoor Environmental Quality
(IEQ) with Variable Refrigerant Flow (VRF)
Systems (by Mitsubishi)
 Utility Incentives: Driving Tomorrow's Energy-
efficient Infrastructure
(by Mitsubishi Electric/Trane HVAC US)
 Strategic Electrification: Satisfy the Demand with
VRF Technology
(by Mitsubishi Electric/Trane HVAC US)
 Improved Energy Efficiency & Door Air quality
with Demand Controlled Ventilation
(by Vaisala)
 How to Protect Your System & Save Money by
Understanding the Effects of Glycol on HVAC
Systems.
(by Belimo)
 Maximizing Building Efficiencies and IEQ
Through Polymer System
(by Uponor)
 How to Quickly Chose the Ideal Fan System for
Cooling Towers
(by BAC)
 Design Considerations for Commercial VRF
Systems
(by TRANE)
@ Saudi Aramco (by HarvardMentor)
(Professional Development Course)
 Project Management
 Team Management
 Crisis Management
 Decision Making
 Process Improvement
 Strategic Thinking
 Stress Management
2024 Process
(by AMCA/International Code Council
(ICC)/Residential Energy Services Network
(RESNET))
 Asphalt Paving in Private Market
Applications
(by National Asphalt Pavement Association,
NAPA)
 Fiber Optics 101
by Incab America
 Maximize Interior Comfort: Combine the
Power of VRF & Air Handling Units
(by LG Air Conditioning Technologies)
 Complete Polymer Solutions for Mechanical
Piping Applications (by Uponor)
 Evaporative for Manufacturing & Industrial
Facilities vs. the cost of Doing nothing
(by Cambridge Air Solution)
 Ensuring Effective Ventilation with Trusted
Data: CO2 for IAQ
(by Vaisala)
 Complete Polymer Solutions for Mechanical
Piping Applications
(by Uponor)
 How Hydronics Play a Role in
Decarbonization and Resilience for the Built
Environment
(by Uponor)
 Maximizing Building Efficiencies & IEQ
Through Polymer System
(by Uponor-ASHRAE)
 Improve Service, Reduce Costs in HVAC
with Predictive Maintenance.
 Strategy Planning and Execution
 Delegating
 Goal Setting
 Strategic Thinking
 Budgeting
 Career Management

8. Page 8 of 12
@ Saudi Aramco (by LUND University)
(Professional Development Course)
 Circular Economy-Sustainable Materials
Management
@ Saudi Aramco (by LUND University)
(Professional Development Course)
 DevOps Culture & Mindset
@ Saudi Aramco (Various Training/Courses)
 Safety Management System Overview &
Implementation
 Workplace CPR & AED
 Work Permit System
 Permit Issuer Course
 Permit Receiver Course
 Lockout/Tagout (LOTO)
 Heavy Equipment Safety
 Confined Space Awareness
 Gas Testing
 Hydrogen Sulfide (H₂S) Safety
 Self-contained Breathing Apparatus
 Office Safety Awareness
 Environmental Management System
 Preventing Overexertion & Heat Stress
 Lessons & Learned
 Information Security Essentials
 Tubular Goods/Line Pipe Handling
 Vehicle Safety
 Static Electricity, Lightning & Stray Current
Safety
 Highway Driving
 Defensive Driving
 Driver Improvement Program Refresher
 Driving on the Desert/ Off-road Driving
 City Driving
 Deadly Driving Habits
 Safety & Pollution Control
 Back Safety
 Pyrophoric Material Identification & Handling
 Hazard Recognition
 Driver’s Readiness
 Safety Valves
 Injury Reporting & Investigation
 HAZCOM- Chemical Hazard Awareness
 Oily Water Lift System Safety
 Initiating a Project
 Planning Project Scope
 Planning Project Cost
 Planning Project Activities
 Executing a Project
 Closing a Project
 Monitoring & Controlling a Project
 Management of Change
 Construction management System Portfolio
Execution Planning
 Application of Saudi Aramco Sanitary
Codes
 Minimum Medical Standard Requirements
 Preventing Struck-by, Caught -in-between
Incidents
 Safe Traffic Controls in Construction Site
 Full Protection Requirements
 Emergency Response Plan
 Emergency Action-Introduction-Loss
Prevention Policy & Safety Responsibilities
 Understanding Contractor Safety
Administration Requirements
 Steel Erection Safety Inspections
 Safety Requirements for Concrete
Construction Work
 Rigging Safety
 Rigging Hardware Inspection
 Safety in Surveying Services Division
 Abrasive Blasting & Coating Safety
Inspection
 Radiation Protection Issues for Projects
 Job Safety Analysis
 Fireproofing for Plants
 Electrical Safety
 Fire Protection Seminar
 Fire Safety Awareness
 Information Security Essentials

9. Page 9 of 12
@ Chicago Bridge & Iron Co. (CB&I)
 Supervisor’s Training
 Oil Spill & Waste Management
 Working on Scissor and Mobile Elevated Work
Platform
@ Nippon Steel Engineering Co. Ltd., Inc
(NSEC)
 Basic Life Support/ CPR-AED/ First Aid
 Offshore Safety and Emergency
 Helicopter Underwater Escape Training (HUET)
 Incident Injury Free (IIF)
 Flu Pandemic Awareness
 ISO 9001: 2000 QMS/ ISO S 29001: 2007
 Pipe Coating & Repair
@ Occupational Health & Safety (OH&S)
 Keep your Fall Protection Program with Newest
ANSI/ASSP Standards
 Noise & OSHA Hearing Conservation Standard
 Two New Electrical Safety Standards of Interest
to Safety Professionals - ATSM F3258 & F3502
 Understanding the Role of Hazard
Communication
@ QHSE Learning Center, Dubai
 ISO 9001:2015 Quality Management System
Auditor
Cert. No. 19550266
The CPD Certification Service
Approved & Verified by Accredible (U.S.A.)
 ISO 45001:2018 Occupational Health & Safety
Management System
(Requirement & Implementation)
Cert. No. 17215092
The CPD Certification Service
Approved & Verified by Accredible (U.S.A.)
 ISO 9001:2015 Quality Management System
(Requirement & Implementation)
Cert. No. 17201346
The CPD Certification Service
Approved & Verified by Accredible (U.S.A.)
@ Udemy, U.S.A (online)
 CONSTRUCTION MANAGEMENT
Mastering Construction/Project Management
(Cert. No. UC-1afb588c-0ac5-49a1-9ffd-
5ea50c500069)
 Defensive Driving
 Incident & Injury Free (IIF)
 Basic Fire Fighting
 Working at Height
 Sea Survival
 Fire Fighting
 Oil Spill & Waste Management
 QMS Induction & Training
 Year End Safe Campaign
 Audit Readiness
 OSHA's First Aid Requirements - FAQs –
Answered
 OSHA's First Aid Requirements
 Oil & Gas – Using Data to Understand &
Address Safety & Health Issues
 Safety Leadership, Rules, and Engagement
– How Leader Drive Safety Culture Success
 ISO 9001:2015; ISO 45001:2018; ISO
14001:2018 & ISO 22000:2018
Integrated Management System (IMS)
(Requirement & Implementation)
Cert. No. 17585948
The CPD Certification Service
Approved & Verified by Accredible (U.S.A.)
 ISO 14001:2015 Environmental
Management System
(Requirements & Implementation)
Cert. No. 17405105
The CPD Certification Service
Approved & Verified by Accredible (U.S.A.)

10. Page 10 of 12
@ International Business Management
Institute, Germany (online)
 PROJECT MANAGEMENT
Cert. No. 254936-158-940-9032
 RISK MANAGEMENT
Project Risk Management
Cert. No.254936-158-835-6671
 CHANGE MANAGEMENT
Management of Change in a Project
Cert. No.254936-158-863-1922
@ Metropolitan School of Business &
Management, United Kingdom (online)
 WORKPLACE SAFETY MANAGEMENT
Managing Workplace Safety
Certificate No. 2004317
@ Technical Education Skills Development
Authority (TESDA), Philippines
 Pipefitter – NC II
General Plant Piping System
Cert. No. R7-STLA-14C-0371
APPRECIATION/RECOGNITIONS
 ACTIVE MEMBER
Philippine Society of Mechanical Engineers
PSME-SA
30TH Anniversary & AGMM
4 December 2020
 ACHIEVEMENT OF ADVANCE DEGREE
Passing Master Plumber Board Examination
Given by PRC-Philippines
Saudi Aramco
11 December 2019
 RECOGNITION OF EXCELLENT EFFORT IN
CONTRIBUTION TO SAFETY – SAFETY
OBSERVATION & NEAR MISS REPORTING
Saudi Aramco
11 December 2019
 TREE PLANTING ACTIVITY (JANUARY 2022)
CERTIFICATE OF APPRECIATION
BLACK GOLD SAPATILHA EAGLES CLUB
PHILIPPINE EAGLES, K.S.A.
14 JANUARY 2022
 BASICS OF PROJECT MANAGEMENT
Project Management Course
Cert. No.254936-158-861-5983
 LEADERSHIP & TEAM DEVELOPMENT
Teamwork Building & Leadership Training
Cert. No. 254936-158-904-3997
 PROJECT ESTIMATION PLANNING
Certificate No. 2005847
 DELEGATE
68TH PSME National Conference
PSME-SA
30TH Anniversary & AGMM
4 December 2020
 RECOGNITION OF VALUABLE EFFORT
IN CONTRIBUTION TO SUCCESSFUL
COMPLETION OF CLEAN
TRANSPORTATION FUEL PROJECT AT
RIYADH REFINERY
Saudi Aramco
28 May 2017
 MEMBER OF THE MONTH (APRIL 2021)
AWARD CERTIFICATE
Philippine Society of Mechanical Engineers
PSME-SA
30 July 2021
 OUTSTANDING ACHIEVEMENT AWARD-
MASTER IN BUSINESS
ADMINISTRATION
PLAQUE OF RECOGNITION
Philippine Society of Mechanical Engineers

11. Page 11 of 12
 EXCEPTIONAL PERFORMANCE &
DEDICATED COMMITMENT AWARD
PLAQUE OF RECOGNITION
Philippine Society of Mechanical Engineers
PSME-SA
02 December 2022
MEMBERSHIP/AFFILIATIONS
 REGULAR MEMBER
Philippine Society of Mechanical Engineers
(PSME)
General Mechanical Engineering
Certificate No. 116397
Philippines
 REGULAR MEMBER
National Master Plumbers’ Association of the
Philippines (NAMPAP)
General Master Plumbing
ID No. 1071
National Chapter
Makati, Philippines
 MEMBER
Saudi Council of Engineers (SCE)
(ID No. 628787)
Kingdom of Saudi Arabia
 FULL MEMBER
Philippine Society of Plumbing Engineers
(PSPE)
General Plumbing Engineering
Certificate No. PE0701
Quezon City, Philippines
 MEMBER
Project Management Technical Division
(PMTD)
PSME Project Management Professionals
Filipino Mechanical Engineers - Worldwide
 MEMBER
GAMMA KAPPA PHI/SIGMA (ΓΚΦ/Σ) 1952
Fraternity & Sorority
ID No.: 0119940010
Tau Chapter
Dipolog City, Philippine
PSME-SA
02 December 2022
 BLOOD DONOR
PICE-IPSA SAVE LIVES 2022
PLAQUE OF RECOGNITION
Philippine Professionals Orgaization
Saudi Arabia
18 March 2022
 MEMBER
Project Management Professionals
(PMP-PMI)
Project Management Institute
ID No. 6410073
Pennsylvania, United States
 FULL MEMBER
American Society of Plumbing Engineers
(ASPE)
General Plumbing Engineering
Certificate No. 46923, ID No.913278
Illinois, U.S.A.
 REGULAR MEMBER
Philippine Society of Mechanical
Engineers – Saudi Arabia Chapter (PSME-
SA)
General Mechanical Engineering
ID No. R-1007
Saudi Arabia Chapter
Kingdom of Saudi Arabia
 MEMBER/ CHARTER CLUB AUDITOR
Al Khobar Black Gold Sapatilha Eagles
Club
The Fraternal Order of Eagles – Philippine
Eagles (TFOE-PE)
Humanitarian Socio-Civic Organization
ID No. TFOE-PE-149310
Saudi Arabia
 MEMBER
FEDERATION OF PROFESSIONALS &
EXPATRIATES (FPEX)
Huminatarian Socio-Civic Organization
ID No.: 22R0549
Al-Khobar Chapter
Saudi Arabia

12. Page 12 of 12
PROFESSIONAL LICENCES &
CERTIFICATIONS
 REGISTERED MECHANICAL ENGINEER
(RMEE)
General Mechanical Engineering
License No. 0103632
Professional Regulation Commission (PRC)
Manila, Philippines
 REGISTERED MASTER PLUMBER (RMP)
General Plumbing System
License No. 0013575
Professional Regulation Commission (PRC)
Manila, Philippines
CHARACTER REFERENCES
 SAVIO J. D’CUNHA
Safety Compliance Advisor
Saudi Aramco
+966567547114
saviojoseph.dcunha@aramco.com
 MADALLAH M. SHARARI
Senior Operation Engineer
Saudi Aramco
+966505391504
madallah.sharari@aramco.com
 LARRY B. ROHRER
QA/QC Manager
CB&I/ Mc Dermott
+1- 713 375 1079
+ 1- 832 360 7350
larry.rohrer@mcdermott.com
 PROJECT MANAGEMENT PROFESSIONAL
(PMP-PMI)
Project Management
Project Management Institute (PMI)
Certificate No. 2811858
PMI, U.S.A
 NEBOSH INTERNATIONAL GENERAL
CERTIFICATE
Occupational General Certificate
(Passed the IG1)
 ZEYAD A. GHAMDI
Project Engineer
Saudi Aramco
+966539090203
Zeyad.ghamdi.1@aramco.com
 ROLF BAKAITIS
Project Manager
Br. C.A.T. International Limited
+966582201645
rolf.bakaitis@catgroup.net
 HIROSHI KATSU
Manager-DLB Logistic & Operation
Nippon Steel Engineering Co. Ltd.
+66656098618
katsu.hiroshi.n7f@eng.nipponsteel.com
“I hereby declare that the details and information above are complete and true
to the best of my knowledge”