1. Lessonplan by r. S, Rawat k.v.(a.g.c.r.)Delhi
Class-vl,vii,vii
Obiect-identification of various types of electrical accessories in house wiring.
Materials required-
SI Name oftools &materials required- Quantity
Switches 01
Main switches
Wires 01
Pendent holders
Wall sockets
Mica boards
Bulbs
Multiple plugs
9
01
01
6
01
01
8
01
Plug
Bed switch
Distribution box
01
10 01
11
01
12
Reflectors 01
13 Ceiling roses 01
14 Mcbs
01
Conduit pipe
Cohnectors
15
01
16 01
Method take the all accessories from an electric shop and fix them all on a wooden
board. Show the all accessories one by one to all the students and discuss one by one.
1. Switches:--- these are used to swilch "on" and switch "off' the current in any
circuit with the phase wire.
1 Switches: --- these are used to
switch "on" and switch "off" the
current n any circuit with the phase
Wire.
Main switches:- it is used in the
circuits to control the supply mains
at the main boards and the whole
circuits
100A
2. Wires: these are used to
do the connections, to install
Any circuits or to give the
supply cte.
Pendent holders these are
used where hanging lighting
is required. These are mostly
connected with ceiling roses
fixed on the wooden boards
4
Pride
or
junction boxes with rools.
Wall sockets:-these are used
in the cireuits to connected
any appliance, machine,
cquipment, table fan, etc.
Mica boards: these are
sed in the circuits for fixing
up the switches, wall sockets
and regulators.
ANTILAK
Bulbs: these are used in the
circuits to give light or to
illuminate any area.
multiple plugs these areare attached
with 2 pin or 3 pin wall sockets to
take the additional connectios for the
appliances and equipments, or
machine etc.
3. Plugs: these are attached with wall
sockets or multiple
holders to take the supply for any
plugs or
appliance. equipments ,machine or
light.
10 Bed switch: it is a switch used to
control the connection of any light or
fan etc. and is mostly connected for
the easy control near the bed as the
name.
Distribution box: it is simply a
metal box assembled with a number
11
of fuse carriers and neutral links in it.
The supply from the main switch is
connected to it and then distributed
46444
to different circuits to
avoid the over
load damage on a particular circuit.
Batten or angle holder: these are
used in the circuits in which the
12
bulbs are attached for lighting fixed
on the wooden blocks or junction
boxes with walls.
4. Reflectors: these are made of glass.
metal. plastic, etc.. to give diffused
reflection.
These are designed to provide the
uniform illumination on the floor.
13
Ceiling roses:- these are used in the
circuits fixed on the wooden blocks
or junction boxes with roofs with
which connection for ceiling fans,
exaust fans, tube lights and pendent
lights are made
Brackets these are fixed on the
ground blocks with walls in which
bulbs are attached for lighting.
15
Mcbs: these days miniature circuit
breakers (mcbs) are increasingly
being used in places of fuses.
These are switches which
16
automatically turn off when the
curTent in a circuit exceeds the safe
limit.
You tun them on and the circuit is
once again complete.
5. Conduit pipe: it is used for
wiring circuits installations
through which the v.i.r. Or
p.v.c. Wires are passed.
17
18 CONNECTORS: THESE
ARE ATTACHED WITH
THE TERMINALS OF ANY
APPLIANCE OR
EQUIPMENT TO GIVE
THE SUPPLY.
Precautions: Fix all the accessories in board tightly.
2 Insulate you before testing.
Questions:
I Give the use of switches?
2 What is the use ofpendant holder?
3 What is the use of mcbs in houses?
4 What is the use ofconnecters?
4 What is the use of main switch? If main switch is not in tour house what happens?
5 Why conduit pipe is using now a day?
6 Where connecters are using?
7 What are brackets? Where they are using?
8 What is the use
of ceiling rose?
9What is the use ofplug and multiple plugs?
10 What is the use ofbed switch?