1. E&B Rubber Metal Products Pvt. Ltd.
sales@ebrubber.com
www.ebrubber.com
2. Dynamic forces of mechanical and hydraulic nature
cause unwanted vibrations in pumps
www.ebrubber.com
3. Lightweight construction of buildings
Space Constraints & valuable floor space lead
to installation of HVAC equipment like pumps
in upper floors
Workplace comfort and productive efficiency
are related
Vibration sensitive quality control , testing
and production machinery are often housed
together to achieve manufacturing ease, yet
making them susceptible to vibration
transmission and inaccurate results.
www.ebrubber.com
4. Higher vibration transmission are known to
cause :
1. Structural and building vibrations
2. Reduced pump performance
3. Impaired service life of the equipment
4. Distortion to foundation, pipe anchors
5. Seal failures , breakage of drive-shafts,
bearings etc.
www.ebrubber.com
5. Attention to simple, cost effective highly
efficient vibration absorbing mount that can
dissipate, absorb and insulate against
vibrations during design and installation of
pumping equipments saves costly retrofitting
of vibration isolators and machinery
downtime later on.
www.ebrubber.com
6. 1) Highest vibration absorption and lowest set
characteristics due to high natural rubber content.
2) ENB is a leader in rubber to metal adhesion and
our processes are geared to enhance this adhesion for
higher mount life under continuous vibration.
3) The fail-safe employed in EGA Series mounts are
tested for Torque movement of top cup due to
rotational motion. The EGA-105 (M16) is torque
tested till 140 Nm.
www.ebrubber.com
7. 4) The final finishing, quality and performance
of the mounts are as per European standards.
5) Dome cover and zinc plated metal provides
protecting against oil , fuel contamination
and corrosion resistance.
www.ebrubber.com
