Due to over consumption 2-3 decades depletion conventional energy source for that alternative source required to reduced energy crisis and enhanced the power production to reduced dependency on other. Thus we demonstrate the alternative source to modernization the existing technology to regenerate and extracted the extra energy without any losses. Thus regenerated up to 25% of energy consumed by new innovating method to generate electricity The mechanical energy of the rotating object is used to generate the power. This has been designed as a generator set on the moving object i.e. the magnets (neodymium) are placed with alternate poles on the stator. By using the principle of Faraday’s law of electromagnetic induction the emf is being induced in the coil which further depends on the magnetic field strength and the relative motion between the magnetic field and the coil. Design process is simple, effective, reliable, economical and efficient. The main benefit is that generation of power is possible without affecting the normal operation and parameters of the moving object.

1. “Modernization of rotational mechanical energy to generate the electrical energy. ”
A Seminar submitted to the Savitribai Phule Pune University,Pune
For the Degree of
Bachelor of Engineering
In
Electrical Engineering
By
Mr. Bhendekar Vijay hanmant (101/16EE/DS)
Mr. Jogekar Dhirajkumar Dashrath(110/16EE/DS)
Mr:Mhamane shubham gurappa(119/16EE/DS)
Mr:Navale ishwar machhindra(547/15/EE)
Under Guidance of
Prof.Mangate S.D.
Department of Electrical Engineering,
Shivnagar vidya prasarak mandal’s
College OF Engineering, Malegaon (Bk)
Tal:-Baramati, Dist:- Pun
Year 2018-2019.

2. CONTENTS
 Need
 Introduction
 Block Diagram
 Operating Principle
 Component
 Actual implementation
 Advantages and Disadvantages
 Applications
 Conclusion
 Future Scope
 References

3. Need of projects
 Increasing energy demand
 encouragement cogeneration and reduce bourdon on
conventional energy sources.
 mechanical moving object for the power generation
and utilization to production of energy.
 Non-Renewable energy sources expired 2-4 decades.
 Focus on reducing wastage of energy in various forms
and production of the free energy.
 Cheap source of energy producing by rotating part of
the moving object.

4. Introduction
 The moving object which produce a mechanical
energy by utilization of the rotation of the moving
object generate an electrical energy.
 The rotational moving object the emf will induced in
the coil and generate the electricity.

5. Block Diagram

6. Working principal
 Faradays first law :when the conductor cuts the rate of
change of flux an emf will induced in it.
 Faradays second law: the magnitude of induced in a
coil is directly proportional to rate of change flux
linkage.

7. Actual implementation

8. Component
 Acrylic sheet
 Magnet
 Copper coil
 Rectifier
 Rechargeable battery

9. Advantages
 Simple construction
 Light weight
 Reliable
 Less maintenance
 Easy installation
 Free available mechanical energy for generation
Disadvantages
 Environmental impact.
 Skill person required to design.

10. Application
 Battery charging
 To run lightening load
 Electronic appliances
 Small dc drives

11. Future scope
 Domestic
 Commercial
 industrial

12. Conclusion
 To encourage the renewable energy sources and
generate pollution free electricity.
 To reduce the burden of load in domestic by self
generating devices is more economical.

13. References
 Use of rooftop ventilator for electricity generation VNIT
Nagpur 2017 IEEE.
 Generation of Light Energy by Utilization of Electrical
Energy 2017 IEEE.
 Design and Implementation of Wind Turbine Imitation
System for Direct Drive CHINA.
 2011 6th International Conference on Industrial Sri Lanka
Wind Turbine Emulator.
 Rectifying Circuits". Power electronics (3rd ed.ed.).
London: McGraw-Hill. ISBN
 Williams, B. W. (1992). "Chapter 11". Power electronics :
devices, drivers and applications (2nd ed.). Basingstoke:
Macmillan.

14. Construction and type of winding
 Field winding
 Armature winding
 Brushes
 Commutator
Types of winding
 Lap winding
 Wave winding

15. Construction
 Armature winding
 Field winding
 Commutator
 Brushes
Types of the winding
 Lap winding
 Wave winding