1. Curriculum Vitae
Chenna Gangadhar
B.E Mechanical Engineer
CSWIP 3.1, Certificate: 42664/2
Mob: +91 889 746 9118 & +91 944 082 4941
Email: Chenna_ganga2007@yahoo.co.in
Driving license: Saudi Arabia Expiration 27-4-2013
Saudi council membership no: 139427
Aramco SAP # 7009472 for RTR & piping Inspector
Aramco Approval for Welding Inspector BI/JO: 03007/00225 (HAWIYAH)
____________________________________________________________
For the Position: Mechanical Engineer welding and piping inspector
Summary:
Geographical Experience: Saudi Arabia, Bahrain and India
Over 9 years Overseas (9 years in India) of continuous experience in the field of
construction, Erection and commissioning of major projects which involves management
and supervisory skills in the field of QA/QC activities for Mechanical and Welding
Inspection Activities, Non-Destructive testing, welding activities. Responsible for the
implementation of integrated quality and environmental management system working
under various international consulting and construction companies in the fabrication and
erection of piping components, vessels, equipments and structure gas plants, power
plants, thorough knowledge in radiograph interpretation of various steel structures and
all type of pipe welding and various casting materials. Knowledgeable about various
welding equipments (WPS/PQR) of carbon steel, alloy steel, stainless steel, Alloy steel
such as P91, P22 and P11 etc.
Non-ferrous alloys and their dissimilar combinations, prepare final documentation and
test packages supervision of control of NDE sub-contractor including NDE cost
administration of non-conformance report (NCR), Punch list and all other outstanding
works, with knowledge in computer application.
Saudi Aramco SAP # 7009472 for Plumbing& piping Inspector
Duties and Responsibilities Performed:
______________________________________________________________________
2. Supervision in installation of different types of simple cycle Gas Turbine and Combine
cycle along with its Balance of plants as follows, pipeline installation in Gas & Crude,
Fire fighting system, Cooling waste water system, and fuel system, Lube oil system, Air
inlet system, Exhaust gas stack installation (GT&HRSG) water treatment plant.
Unloading& forwarding pumps along with piping’s and water pipe lines
QA/QC-NDE, Quality, inspection of incoming materials, Testing, Commissioning of
Boiler, Turbine Condenser, Boiler feed pumps, pressure vessels, LP&HP Drums,
Desalinations plant, chlorination plant, Nitrogen plant, Sea water intake system, Booster
station pumps, Jetty system
Experience Profile:
Position : Mechanical Engineer-Welding and Piping Inspector
Organization : DAELIM INDUSTIAL COMPANY SAUDI ARABIA LTD
Place : Shoaiba, Jeddah, KSA
From : July 2012 to January 2015
Client : POYRY OWER ENGINEER (SEC)
Project : SHOAIBA II- CCPP SAUDI ARABIA 1240MW
JOB DESCRIPTION
Worked as EPC Inspector of Main contractor for site monitoring, surveillance and
inspection of all mechanical related construction works consist of two blocks of 5
Gas Turbine Generators each exhausting through a Heat Recovery System
Generator. The HRSG’s supply steam to a steam turbine
Review all the P&ID’s& ISO drawing for proper inspection as requested by the
sub-contractors QA/QC discipline
Attended all request for inspection raised by the sub-contractors for all the
mechanical works
Prepare the punch list that is not compliance from the SEC PTS requirements
GRP piping, carbon steel,SS,Alloy steels and Duplex steels of different grades
installation performed inspection activities
Reporting to Deputy manager and corporate QA/QC Manager,OWER Engineers
3. Review and approved submitted documents such as WPS &ITP etc
Monitoring and surveillance of shop and field welding activities
Monitoring &Establishing the contractor and sub-contractor Quality control
systems wherever required as per contract specification,codes and standards
Establish and conduct weekly Quality control meetings with the sub- contractors
Coordinate all the quality site inspections through the site QC inspectors
coordinate with the site Manager on all quality issues and participated in weekly
site progress review meetings and monthly management meetings
Raising and Resolving Non-conformance Reports (NCR) and punch list and
maintain the data base
Review and comments on sub-contractors weekly and monthly reports
Incoming materials inspection and review of Mill test certificates & monitoring
storage/presentation of materials
Attend for Shop& field inspections as per approved ITPs and Method of
statements
Coordinate and monitoring welder qualification test as per the requirements
Monitoring sub-contractors conducting QA/QC and safety awareness tool box
meeting as per construction requirements
Responsible for all welding activities and review all approved WPS’s,
PWHT,RT,PMI,Hardness test reports and witness of welder qualification test
Monitoring and witness of Hydro Test and Insulation,Painting,plumbing activities
as per the project specifications & standards
Clearing of punch list items for piping’s and mechanical equipments
Organization : Al Bader Company- Saudi Arabia Abqaiq
Position : Mechanical Engineer- Piping Inspector
Client : SAUDI ARAMCO ABQAIQ- KSA
From : Feb 2008 to March 2012
Project : Upgrading oily water system -Southern Area Oil Operation
4. Shedgum project- BI/JO#10-00209-00001,6600019257/19258/59
Upgrading waste water system
Sanitary waste water &oily water system
Surface drainage system
JOB DESCRIPTION
Scope of work GOS Plants and Water injection plants such as Abqaiq
Gosp 5, shedgum Gosp;s, Aindhre, Udhliya, Uthmaniya, Alhasa etc.
Gosp plants consist of work to install new (OR) Upgrade underground and
above ground pipes,pumps,instruments and electrical works such as
Fabrication and installation of piping CS &RTR,PVC
Construction of sanitary lift stations & Oily water sumps
Oily water system include underground piping,pumps,aboveground
piping,lift stations,instruments and related electrical connections
Construction of oily water ponds and oily water sumps etc.
Responsibilities
Reviewing Aramco standards,ITP,Methodstatements and inspection
procedures
Reviewing WPS/PQR/welder qualification records
Inspecting joint configuration of fit up prior to weld as per WPS
Checking alignments/orientation of pipes as per ISO drawing
Surveillance of welding parameters/consumables for compliance with
WPS
Monitoring calibration status of welding machines, inspection tools,Quives
Conducting the welders performance test visual inspection of the final
weld profile
Witnessing the NDT methods, monitoring the heat treatment cycle and
charts
5. Witnessing the hydro test coordination with the ARAMCO inspectors
during quality walkthrough
Raising of RFI, NCR internal and clearing
Generating quality control reports
Submitting ECC& MCC packages to client
Organization : Al Waha Electrical Excavation Company- Bahrain
Position : Mechanical Engineer
From : April 2005 to May 2007
Client : Ministry of Works & Housing- Bahrain
Job profile: Completed the construction project Diraz intermediate Boys school
Bahrain
Maintained sewerage line pumping station in Bahrain ministry works and housing
Completed the Tylos plastic factory Bahrain
Organization : Lokesh Machines Ltd Hyderabad India
Position : Mechanical Engineer Quality Control Dept
From : August 1995 to April 2005
Job Profile: Assembling the special purpose Heavy machines for the Elite
customers like Ashok Leyland.Mahindra.L&T etc
Maintained the shop floor
Supervise the production,quality,production and assemble process
Personal profile:
6. ______________________________________________________________________
Name : Chenna Gangadhar
Education Qualification : Bachelor of Engineering Mechanical (1995)
Institution/ University : Chaitanya Bharathi Institute of Technology
CBIT, Osmania University, Hyderabad, India
Professional Certification : CSWIP 3.1 Date of issue 4th
Nov 2009
And 23rd
Dec 2013 until 21st
Dec 2018
Nationality : Indian
Date of birth : 10th
March1968
Pass Port No : Z 2916910
Valid Up to : 17-1-2025
Address : HNO 20-1-556/A - HUSSAINIALAM
: Puranapool – Hyderabad - 500064 - India
Chenna Gangadhar
7. ______________________________________________________________________
Name : Chenna Gangadhar
Education Qualification : Bachelor of Engineering Mechanical (1995)
Institution/ University : Chaitanya Bharathi Institute of Technology
CBIT, Osmania University, Hyderabad, India
Professional Certification : CSWIP 3.1 Date of issue 4th
Nov 2009
And 23rd
Dec 2013 until 21st
Dec 2018
Nationality : Indian
Date of birth : 10th
March1968
Pass Port No : Z 2916910
Valid Up to : 17-1-2025
Address : HNO 20-1-556/A - HUSSAINIALAM
: Puranapool – Hyderabad - 500064 - India
Chenna Gangadhar